SPL REP TO BLDG NO P651 AT GARDEN CITY AND PROVN OF FALSE CEILING WITH ELECTRIC FITTINGS KOTA STONE AND ROOF SHEET IN OR LIVING ACCN BLDG PRR 208 AND CERTAIN REVENUE WORKS UNDER AGE B R EAST AT GE DEHU ROAD

Amount

Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in loose/hard/dense soil complete all as specified directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified directed.

Removing excavated material exc 50 mtr and n exc 250 mtr depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified directed.

M&L for cement concrete of Type D2 (1:4:8) (40 mm garded aggregate) in foundations, filling and mass concrete complete all as specified directed.

M&L PCC 1:2:4 type B2 using 40 mm agg as in fdn filling and mass concrete complete all as specified and as directed.

M & L for brick work with sub class "B" brick straight or curved on plan exceeding 6 mtr mean radius built in cm 1:6. complete all as specified directed.

M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified directed.

M&L for providing 100 mm thick cement concrete type C-2 , (1:3:6) (using 40 mm graded stone aggregate) as in sub base complete all as specified directed.

M&L for prividing 25 mm thick cement concrete type B-1, (1:2:4) (20 mm graded stone aggregate) as in floor finished surface even complete all as specified directed.

M&L for joint free non-skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc 0.11sqm but n.exc 0.18sqm, of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over & including 10mm thick rendering in CM (1:4) for wall complete all as specified directed.

M&L for Glazed ceramic tiles 300mm x 200mm x 7mm to 8mm thick (square/rectangular) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over & including 10mm thick backing coat in CM (1:4) for wall complete all as specified directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 using WPC (WPC will measured and paid seperately), complete all as specified

Supply only integral water proofing compound.

Preparing of new surfaces of walls and applying two coats of cement base paint over a coat of priming paint, complete all as specified

M & L, applying two coats of oil bound distemper over one coat of primer including preparation of newly plastered surfaces of walls complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying two coat of oil bound distemper Complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of Cement base paint Complete all as specified and as directed.

M & L, for complete removal of existing treatment on walls and applying two coat of Cement base paint Complete all as specified and as directed.

M&L for preparation of old decorated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint Complete all as specified and as directed.

M&L for preparation of old decorated steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of aluminium primer Complete all as specified and as directed.

S&F 10 ltr PVC low/high level flushing cistern white incl PVC inlet pipe with brass check low level full both sides along with PVC flush pipe 32mm dia jointed to WC and handle incl brackets fixed in repairs all as directed.

S&F Vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistern & flush pipe complete all as specified directed.

S & F in repair, for vitreous china wash basin flat back of size 550x400mm pedestal pattern incl brackets, cutting for and pinning in ends or brackets, but excluding taps, waste, chain and plug and porcelain stopper complete all as specified directed.

S & F in repairs plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated high in device complete all as specified directed.

S&F 32mm bore PVC waste pipe 60cm long for sink and wash basin complete all as specified directed.

M&L for 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified directed.

M&L for Cast Iron floor trap 75 mm out let, with grating including joning to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified directed.

S&F in repairs 15 mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

S & Fixed in repair Grating of size 100 mm dia of PTMT. (Mimimum weight 25 gms) complete all as specified directed.

S/F 15 mm dia stop valves cast copper alloy fancy type chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified directed.

S & F of steel tubing medium grade galvanized with all fittings and fixtures fixed to wall ceiling or laid on floor for 15mm dia complete all as specified directed.

S & F of steel tubing medium grade galvanized with all fittings and fixtures fixed to wall ceiling or laid on floor for 20 mm dia complete all as specified directed.

Fixed in repair Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pire complete all as specified directed.

Fixed in repair PVC Ball valve high pressure with polyethylene float and fly nut complete screwed for iron pipe 20 mm bore.

Excavating in post holes (or similar holes) each n. exc 0.50cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified directed.

M/L Cement concrete (1:3:6) using 40 mm graded stone aggregate as in Pillars, boundary pillars and posts (including caps and bases) etc all as specified and as directed

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; walk ways railing; frame work of water tanks and similar work conforming to Fe.290 Gde E-165 complete all as specified

S&F, 4mm thick, Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified directed.

M & L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet , 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and Directed.

All as per item No. 44 above above but plain sheet fix in valley gutter / ridge

M & L for Anodised Alu. snap grid of size 605x605 mm frame wk for false ceiling with 9 mmth acoustic board/tiles of size 60x60 cm for insulation and acoustic purposees fixed to celing with screws to frame work or with staples on snap grid complete with and including 6mm dia hangers upto 1200mm lenght adusting level fixed to roof and slabs by means of ceiling cleats mode out of GI flat (40x3) mm size 60 mm long complete all as specified & as directed.

S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2004 complete all as specified and as directed.

S&F,Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2004) complete all as specified and as directed.

S/F Aluminium door handle 125mm size cast type complete all as specified directed.

S & F tower bolt 200 mm long aluminum anodized of extruded section complete all as specified directed.

S & F butt hinges MS medium weight 100mm long complete all as specified directed.

S&F 250 mm aluminium alloy, anodised, sliding door bolt with hasp, staple(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.

M&L for RCC hume pipe septic tank for 10 user's designed to carry sewage and sludge water , including excavation and earth work in any type of soil, PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, vent shaft connection etc all as specified and directed by Engr-in-Charge

M&L for soakage wells including excavation and earth work in any type of soil, PCC (1:3:6) type C-2 (using 40mm graded stone aggregate), brick wall with honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM (1:4), RCC cover slab in M-25/SFRC cover interconnecting pipe of RCC/DWC complete filled with brick bats of size 1.2 m dia x 1.5m effective depth

M&L for PCC ( 1:4:8) type D2 (using 40 mm graded stone aggregate ) as in bed to drain pipes, incl packing under & hauching against the sides of pipes after they are laid and tested for 150 mm bore RCC Pipe complete all as specified directed.

M&L for reinforced cement concrete pipes class NP - 3, laid in trenches & jointed complete with collars, dia of pipe 150mm.

M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate in coping benching etc slightly rounded or chamfered as directed.

M&L for pre cast cement concret cover slabs of PCC (1:2:4) Type B-1 set & jointed in CM (1:6) (Reinforcement shall be measured & paid separately)

M&L for TMTbars , 6 to 8mm dia cut to length, bent to shape required incl cranking,bending, hooking ends & binding with & incl mild steel wire (annealed ) not less than 0.9 mm dia. complete all as specified directed.

M & L Rolled sections equal angle as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified directed.

M&L for MS Plates (plain or chequrred) channels,square cut, notched chamfer or square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment with MS Gde Fe 410-0 complete all as specifid and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified directed.

M & L for Moorum/red bajri filling in floors or paving laid in layers n.exc. 15 cm thick spread levelled and rammed including watering complete all as specified and directed.

M & L 100 mm thk Hard core of broken stone or boulders, gauge n.exc. 63 mm deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in sub base for floor tiles complete all as specified and directed.

Taking down plaster from brick wall or store walls etc including raking out joints, hacking for key, scrubbing down with water Complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:6 on Brick / conc. surfaces & finishing surface even & smooth complete all as specified directed.

Dismantling of stone slabs of any desc or thk in floors laid and bedded in any mortar complete all as specified directed.

Taking down or up steel water tubing 15mm dia and connections with all fittings/valves in any place, wall, roof, ceiling etc. and removal to store all as specified

Taking down or up steel water tubing 20mm dia and connections with all fittings/valves in any place, wall, roof, ceiling etc. and removal to store all as specified

M&L for vitrified ceramic tiles in repair 8mm to 10mm thick (square/rectangular) area of each tile n.exc 0.36sqm, of approved colour in floors, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over 15mm thick screed bed in CM (1:6) for floor complete all as specified directed.

M&L Non skid ceramic coloured tiles in repair 7 to 8mm thick (square/rectangular)area of each tile exc. 0.06sqm but not exc. 0.11sqm, in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles including 15mm thick screed bed or bedding layer in CM 1:6 for floor complete all as specified directed.

M&L for vitrified ceramic tiles in reapir 8mm to 10mm thick (square/rectangular) area of each tile n.exc 0.36sqm,, of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over 10mm thick rendering in CM (1:4) for wall complete all as specified directed.

M&L for Glazed ceramic tiles in repair 350mm x 250mm x 7mm or 450mmX350mmX7mm thick (square/rectangular) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over 10mm thick rendering in CM (1:4) for wall complete all as specified directed.

M&L for 20 mm thick Granite ( of any type ) work (table rubbed and polished ) in door , window jambs & cills, cooking platforms and like in CM1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab including cutting & polishing complete all as specified and directed.

S&F in repair 25mm dia S.steel curtain rod with fixing brackets complete all as specified & directed.

S&F in repair satainless steel fancy type ends for 25mm dia for curtain rod complete all as specified.

S&F in repair 15 mm dia galvanised iron water tubing medium grade, including all fittings such as tees, bends, elbows, reducers, unions, clamps etc. complete fixed to wall or laid in floors complete all as specified directed.

S&F in repair 20 mm dia galvanised iron water tubing medium grade, including all fittings such as tees, bends, elbows, reducers, unions, clamps etc. complete fixed to wall or laid in floors for complete all as specified directed.

Dismantling water tanks of 500 Ltr capacity form any position.

Dismantling water tanks of 1000 Ltr capacity form any position.

S&F rotational moulded Polythene (HDPE) double layer water tanks, cylindrical & vertical type 500 Litres capacity hoisted and fixed in position including provision of 20mm/15mm dia. spouts for connecting inlet, outlet, over flow and washout pipes complete all as specified directed.

All as per item No. 78 above but 1000 litres.

S&F in repairs PVC float valve high pressure with polythene float and fly nut complete, screwed for iron pipe of bore 20mm dia or brass ferrule complete all as specified directed.

S&F in repairs PVC float valve high pressure with polythene float and fly nut complete, screwed for iron pipe of bore 15mm dia or brass ferrule complete all as specified directed.

S&F in repair bib tap chromium plated 15mm dia brass long body fancy type half thread complete all as specified directed.

S&F in repair 15 mm dia Bib tap, of PTMT any colour high pressure screwed for iron pipe and fixed complete.

S&F in repairs 15mm dia stop valve concealed type cast copper alloy screwed down high pressure chromium plated with long shank including dismantling portion of the wall as requiired including making good to match with existing complete

S/F in repair Vitreous china wash basin white flat back size 580 x 450mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed.

S&F in repairs Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and Cover including Mild Steel Chromium Plated Aluminium Hanging Device and fixed all as directed.

M&L PVC (SWR) floor trap with grating including jointing with solvent cement 75mm bore dia complete all as directed.

S&F in repairs toilet paper holder fancy type chromium plated screwed down for fixing to walls with screws complete all as directed.

S&F as in repairs 15mm bore telephonic shower crominum plated brass body fancy type complete all as directed.

S&F in repairs fancy type towel rack 60cm long screwed down for fixing to walls with screws complete all as directed.

S&F in repairs 12 "corner glass 8mm thick fancy type chromium plated screwed down for fixing to wall with screw all as apecified and directed.

S&F in repairs PVC connection 15mm dia 45 cm long with 02 Nos.PTMT check nuts with washer complete all as directed.

S&F in repair CP jet spray with one mtr flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S&F in repair health Faucets with flexible tube 15mm dia for EWC including all connection complete and all as specified by Enr-in-Charge

S&F in repairs Brass chromium plated wall mixer with hand shower for mixing hot or cold screwed down high pressure with or without lettered `' with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm dia bore pipe complete all as directed.

S&F, PVC cabinet fancy type of size 460mmx360mm with looking mirror complete(make-PRAYAG/COMMANDER, NILKAMAL).

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with 40mm dia CP wast coupling complete.

S&F, in repair 19/20 mm thick pre laminated particle board, exterior grade pre laminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinet or fixed with screws to timber frame work, complete all as specified and as directed.

S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails complete all as directed.

S&F, 100mm size Hasp and staple, safety type aluminium anodized stove enameled black with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps complete all as directed.

S&F 40 mm dia, mild steel bright finished cup board knobs fixed with nut, screw and washer complete all as spd and directed.

S&F, Ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and as directed.

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 100mm with all fittings .

Demolition & breaking up drain pipes (SWG, AC, RCC etc) set in CM int dia of pipe 75mm with all fittings .

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 110mm dia pipe complete all as directed.

S/F PVC pipes (SWR) single socketed in any length with rubber ring joints laid in trenches ,floor or wall for 75mm dia pipe complete all as directed.

S/F (SWR) junction single ( single T) equal or unequal 110mm dia with access door complete all as directed.

S/F (SWR) junction single ( single T) equal or unequal 75mm dia with access door complete all as directed.

S/F PVC (SWR) vent cowl 110mm dia complete all as directed.

S&F PVC (SWR) bend 110 mm dia all as specified and directed

S&F PVC (SWR) bend 75mm dia all as specified and directed

Taking down shutter exc 1.0 but nexc 2.0 sqm

Taking down shutter with frame of area nexc 1.50 Sqm

S/F 30mm thk flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as directed.

S&F, 35mm thick 2nd class hard wood glazed & skelton shutters, open repeated & prepared to receive glass, gauze etc. without sash bars, edges of framing plain, chamfered or rounded, fitted with cut or mitered beads for securing glass etc, sizes of members of shutters as specified in SSR part I, section 8, clause 8.24(a) Complete all as specified and as directed

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm complete all as directed.

S/F aluminium anodised handles cast type 150mm long complete all as directed.

S&F, 100mm long M.S hinges complete all as specified and as directed.

S&F Aluminium anodized barrel tower bolt 150mm size complete all as directed.

S&F 250mm, oridinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F Anodised aluminium Powder coating frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium Powder coating window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified

S&F, 4 mm thick sheet glass with 50micron solar control film reflective type, ordinary quality and glazing with oil putty or wooden beat in square n exc 0.5 sqm in each pane complete all as specified and as directed.

S&F stainless steel wite cloth .36mm nominal dia of wire and average width of aperture 1.40mm and fixed wth stainless steel wire staples complete all as specified directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete all as specified directed.

Demolation of concreate (un reinforced) in ground floors and paving n exc 15 cm thick below or above ground level)

M&L 75 mm thick P.C.C 1:4:8 type D-2 using 40 mm graded aggregate in sub base complete all as specified directed.

Dismantling asbestos cement (corrugated/ semi corrugated etc) sheet in roof covering complete all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified directed.

Demolation of brick work built in cement mortar including all arches, pillars all quoins etc complete all as directed

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified directed.

E/M PORTION

Taking down carefully copper/aluminium point wiring (light, fan, socket or ower) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.

Taking down unserviceable main switches ,DBs alongwith teak wood boards etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified

M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5 sqmm copper conductor FR PVC casing caping and surface/concealed PVC Conduit & accessories having ISI mark to be fixed with proper screws/ (MS steel strips if required ) including all accessories/ fittings/ junction boxes /inspection covers etc including hard PVC board of required size fixed with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches fan regulators etc including 1.5 sqmm (22/0.30mm) 1100 V grade PVC insulated, unsheathed flexible muliti stranded copper conductor FR cable as continuous earthwire connected to metallic bodies of luminaries/fans etc. at one end and to common earth duly at other end for.

One light point controlled by one way switch

One fan point controlled by one switch

One bell point controlled by one bell push

One Exhaust fan / Wall mounted point controlled by one switch

One socket 5 pin 5 Amps flush type on independent board.

One socket outlet 5 pin 5 Amps flush type on same board.

One socket 5 pin 15 Amps flush type on independent board.all as item no 3 but with 2.5 sqmm copper wire

One light point controlled by two 2 way switch

S & F one 3 pin socket outlet, 5 Amps on the same board with other switches with cables 1.5 Sqmm size.

All as per item No 140 but 2.5 Sqmm copper conductor with 1.5 Sqmm copper cable PVC insulated as continuous earth wire for 15 Amps switch socket independent board.

S&F switch piano flush type single one way 5 Amp

S & F Switch piano flush type single pole one way 230V 6Amps

S & F Switch piano flush type single pole two way 230V 6Amps

S & F Socket outlet 2 in 1 , 3 pin 5 Amps flush type 230V S.P. multipurpose type

S & F switch socket combination 5/16 A 5 in 1 flush type with fuse and nein indicator.

S & F ceiling rose surface type 65 x 50 mm, isolated body with 3 terminals to be fixed on PVC block.

S & F Bell push, flush type, 5 amp, 230V

supply &fix Metal sheet Enclosure of 8 way with 200 amps rated bus bar

supply &fix isolator SPN,240v 40 amps Rated

supply &fix isolator SP ,240v 6-32 amps Rated

PVC Rectangular block for switches,sockets etc with 3 mm thick plastic laminated cover of size of 250mmX200mmX50 mm

supply &laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 2 Core 16 sq mm

Supply& laying HDPE DWC Pipe 20 mm 6 Kg CM2

S&F in repair LED Recess mounted LED fitting 36/42 Watts CAT NO LCTLSNE-36-FO-WW of CROMPTON or PLUTONEO2X2PLR34WLED840S of HAVELLS or HPLLEDEPN36WWS of HPL

Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

Taking out LT Cable of any size(10 sqmm 2/4 core to 120 sqmm 3.5 core) for reuse or under Schedule of credit to contractor. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

S & F Bell ding dong type 230V

S & F Tube light fitting batten for LED 1X20W tube with LED tube rod retro bar professional CW 6500K cool Make : Havells Cat Part no LHEXACP7UNIW020.

S & F in repair LED lamp pin type 10 watt Make : Havells Cat part No LHLDEUEEML8RO10

M&L in repair for stepped type electronic fan regulator flush type for ceiling fan 230 volt AC supply, 50HZ 1200/1400 mm sweep

S & F in repair Lamp holder ( angular type) , PVC/Polycarbonate type batten fittings insulated body with back plate

M & L in repair MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 Volts , 16 way

S & F MCB SPN 5-40 amps, 240Volts 10KA

S & F MCB SP 5-40 amps, 240Volts 10KA

S & F MCB TPN 63 amps 415 Volts 10 k

S & F exhaust fan AC single phase 230 V,300 mm sweep, heavy duty with louvers, metal body, blades, Insulation Class A including capacitor complete all as specified and directed by Engineer-in-charge( including making hole on exixting wall and making good surface of wall with necessary PCC Work and plaster etc.) . Make :-Model : Ventil Air-DB 300 mm of Havells and equavalant of GEC/Bajaj/ CG/ Khaitan/ Usha

Taking down ceiling fan 1200/1400 mm sweep including disconnection of electric connection refixing/ hanging ceiling fan after completing false ceiling works and all as directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified

M&L submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 1100Volts grade (FRLS) cables 4.sqmm and 2 run 6 Sq mm PVC insulated multistrand cu conductor cable (FRLS) of green colour for continious earthing drawn through PVC surface/concealed PVC conduit of suitable size and with all accessories all as directed and specified by Engr-In-charge.( Note: Two runs of 6 sqmm, one run of 4 sqmm copper conductor and one run of surface/concealed PVC conduit of suitable size and with all necessary fixing accessories and making good disturbed surface area shall be measured as one length.)

Santhi Enterprises

DR J S CHADHA AND SONS

AVS CONSTRUCTION

H S TAKHI

RAMESH PATIL

KARPE AND SONS CONSTRUCTION

Ridhi Constructions