Construction of Shop rooms near Sedding by the side of Barbil-Thakurani road, Ward No.4, Barbil Block-A

Earth work excavation of foundation in stoney earth and gravel mixed with stone boulders with initial lead of 50 mtr and lift of 1.5 mtr including dressing leveling the bed.

Filling in foundation and plinth with excavated earth including ramming and watering as directed by Department.

Supplying and filling in with clean coarse river sand in foundation and plinth including ramming consolidating with all cost of materials, labour, T. & P. etc. complete.

Plain cement concrete (1:3:6) using 40 mm. size hard crusher broken granite stone metal of approved quality & from approved quarry including lowering, laying the concrete, watering and curing etc. complete to required levels laid in layers including cost conveyance, royalities & taxes of all mateirals & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge.

Fly ash brick masonry in cement mortar (1:6) including watering and curing etc. complete including cost conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per direction of the Engineer in charge in foundation and plinth.

Reinforced Cement Concrete of M-20 grade using 20 mm and down size hard crusher broken granite stone chips of approved quality & from approved quarry including lowering, laying the concrete, watering and curing etc. with cost of centering and shuttering for the work etc all complete to required levels laid in layers including cost, conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per Direction of the Engineer in charge. (including centering and shuttering). A.Foundation

B)Plinth Bend

C) Lintel Bend

D)Stair Case

E)Roof Slab

Column and beam

Fly ash brick masonry in cement mortar (1:6) including watering and curing etc. complete including cost conveyance, royalities & taxes of all mateirals & cost of all labour with T & P required for the work etc all complete in all respect as per direction of the Engineer in charge in Super structure

Cutting, Straightening coiled or bent up HYSD tor steel, bending, binding, welding and jointing if necessary and tying the grills and placing in position including cost of binding wire 18 to 20 gauge as required for R.C.C. works and providing fan hooks, hoisting, lowering, and laying the grills in floors and others etc. including cost of steel, conveyances, labour, royalties, taxes with T & P etc. all complete in all respect as per the Direction of the Engineer in charge.

12mm thick CP in CM(1:6) including watering and curing cost, conveyance, royalties & taxes of all & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge.

16mm thick CP in CM(1:6) including watering and curing cost, conveyance, royalties & taxes of all & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge.

6mm thick CP in CM(1:4) over RCC work including watering and curing cost, conveyance, royalties & taxes of all & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge.

Finishing wall with wall primer to receive paint/distemper with approved quality and approved shade confirming to ISI with cost, conveyance, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge to inner and outer face of walls, ceiling, projections.

Weather coat painting two coats with approved quality and approved shade confirming to ISI with cost, conveyance, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge to inner and outer face of walls, ceiling, projections.

Distempering Two coats with approved quality and approved shade confirming to ISI with cost, conveyance, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge to inner and outer face of walls, ceiling, projections.

2.5cm thick A.S. flooring with using 12mm size chips and punning including watering and curing cost, conveyance, royalties & taxes of all & cost of all labour with T & P etc all complete in all respect as per Direction of the Engineer in charge.

Supplying, fitting and fixing M.S. door & M.S. window with grill made out of M.S. square bar / M.S. flats / M.S. angles / M.S. sheet as per approved drawing and design, cutting to required size and welding properly, finished smooth by machine grinding and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete including the cost of making holes on brick or concrete structure subsequent mending good damages complete as per direction of the Engineer-in-charge.

Supplying,fitting and fixing of Stainless steel of 304 Grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtrs C/C and Stainless square pipe bracing of size 32mmx32mm in 3rows as per approved drawing and specification, buffing,polishing etc with cost, conveyance. taxes of all materiale, labour T$P etc required for the complete in all respect.

Painting two with Enamel paint of approved quality and approved shade confirming to ISI over a coat of primer including watering, curing, cost, conveyance, taxes of all materials, labour, sundries, T& P scaffolding required for the work and complete in all respect as per specifications and directions of Engineer-in-charge to inner and outer face of walls, ceiling, projections.

Cost for internal Electric Wiring inside rooms and varendah

Provision of photographs at different stage of execution of the work with all cost.

Provision of Display Board of 3ftX3ft size made of MS angle and plate