MAINTENANCE AND REPAIRS TO LED LIGHTS, HIGH BAY LIGHTS INSIDE HANGERS / SUNSHELTERS IN TECHNICAL AREA AT AFS BIDAR

Amount

Disconnection and removing the unserviceable high/Med/ Low bay /security light fitting/Integral CFL light Fittings/Infra red light fittings from any height of the Hangers/ Sunshelters of capacities 70/150W /250W/400 W along with its connecting iron brackets complete for repairs for finding out faults and to replace the defective parts like ballast, lamp, ignitor, condenser, Reflector, Refractor, housing and control gear case etc as mentioned here-in after, and refix the same in its original position with clamps, nuts & bolts complete all as specified and as directed. NOTE :- (i) MH / Infra red lamps, Ballast,Ignotor, Condenser and integral parts of the fittings and lamps will be measured and paid separately under relevant items as supply olnly (ii) Labout element involved for fixing of parts is deemed to included in the quoted rate.

Supply only capacitor 10 MFD AC 250 volts

Supply only capacitor 15 MFD AC 250 volts

Supply only capacitor 20 MFD AC 250 volts

Supply only 400 W, 230 volts metal halide lamp

Supply only Copper Ballast for High Bay light fitting 400W, MH enclosed type

Supply only 250 W, 230 volts metal halide lamp

Supply only Copper Ballast for High Bay light fitting 250W, MH , 250 volts suitable for Integral type

Supply only 150 W, 230 volts metal halide lamp type DE

Supply only copper ballast for high bay light fitting 150 W, MH, 250 volts suitable for integral type

Supply only porcelain lamp holder screw type suitable for 70 to 150 W, 230 volts lamp fittings

Supply only porcelain lamp holder screw type suitable for 250 to 400 W , 230 volts lamp fittings

Supply only ignitor suitable for MH fitting for 70 to 150 W, 230 volts

Supply only ignitor suitable for MH fitting for 250 W to 400 W, 230 volts

Supply only 150 W, 230 volts infra red lamp

M&L for sub main wiring/power wiring with 2 runs of 1.5 sqmm PVC insulated multi stranded copper conductor FRLS 1100 V cable and one run of 1.5 sqmm copper FRLS 1100V cable as earth lead drawn in existing ERW steel conduit including taking down old unserviceable wiring complete all as specified and as directed. Note : Two runs of of 1.5 sqmm PVC insulated stranded copper conductor and one run of earth wire 1.5 sqmm shall be measured and paid as one unit.

M&L for sub main wiring/power wiring with 2 runs of 2.5 sqmm PVC insulated multi stranded copper conductor FRLS 1100 V cable and one run of 2.5 sqmm copper FRLS 1100V cable as earth lead drawn in existing ERW steel conduit including taking down old unserviceable wiring complete all as specified and as directed. Note : Two runs of of 2.5 sqmm PVC insulated stranded copper conductor and one run of earth wire 2.5 sqmm shall be measured and paid as one unit.

M&L for sub main wiring/power wiring with 2 runs of 4.0 sqmm PVC insulated multi stranded copper conductor FRLS 1100 V cable and one run of 4.0 sqmm copper FRLS 1100V cable as earth lead drawn in existing ERW steel conduit including taking down old unserviceable wiring complete all as specified and as directed. Note : Two runs of of 4.0 sqmm PVC insulated stranded copper conductor and one run of earth wire 4.0 sqmm shall be measured and paid as one unit.

M&L for sub main wiring/power wiring with 4 runs of 6.0 sqmm PVC insulated multi stranded copper conductor FRLS 1100 V cable and two runs of 6.0 sqmm copper FRLS 1100V cable as earth lead drawn in existing ERW steel conduit including taking down old unserviceable wiring complete all as specified and as directed. Note : Four runs of of 6.0 sqmm PVC insulated stranded copper conductor and two runs of earth wire 6.0 sqmm shall be measured and paid as one unit.

Disconnection and taking down the unserviceable MCB DB TPN 4 way with one MCCB and S&F MCB DB TPN IP 54, 4 way including one MCCB 125A 4 pole, 25 KA as incoming complete in sheet metal enclosures vertical type double door complete all as specified and as directed.

S & F in replacement of MCB DB SPN 4 way, 200 Amps rated copper bus bar with mild steel sheet enclosure, double door, suitable for fixing MCB's including connection complete all as specified and as directed.

S & F in replacement of MCB DB SPN 8 way, 200 Amps rated copper bus bar with mild steel sheet enclosure, double door, suitable for fixing MCB's including connection complete all as specified and as directed.

S & F in replacement of MCB DB SPN 12 way, 200 Amps rated copper bus bar with mild steel sheet enclosure, double door, suitable for fixing MCB's including connection complete all as specified and as directed.

Disconnection and taking down the unserviceable metal plug and socket and S&F Metal plug and socket with MCB SP 3 Pin 32 Amps complete all as specified and as directed.

Disconnection and taking down the unserviceable metal plug and socket and S&F Metal plug and socket with MCB three Phase 5 Pin 63 Amps complete all as specified and as directed.

Disconnection and taking down the unserviceable MCCB 4 pole 25 KA 63 Amps and S&F MCCB 4 pole 25 KA of capacity 63Amps complete all as specified and as directed.

Disconnection and taking down the unserviceable MCCB 4 pole 25 KA 100 Amps and S&F MCCB 4 pole 25 KA of capacity 100 Amps complete all as specified and as directed.

Disconnection and taking down the unserviceable MCCB 4 pole 25 KA 160 Amps and S&F MCCB 4 pole 25 KA of capacity 160 Amps complete all as specified and as directed.

Disconnection and taking down the unserviceable MCCB 4 pole 35 KA 250 Amps and S&F MCCB 4 pole 36 KA of capacity 250 Amps complete all as specified and as directed.

S & F in replacement of MCB TPN 32 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of MCB TPN 63 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of MCB SPN 32 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of MCB SPN 63 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

S & F in replacement of MCB SP 6-32 Amp 240 V 50 Hz AC Supply complete all as specified and as directed.

Disconnection and taking down the unserviceable High Bay light fitting 400 watt MH S&F for New High Bay light fitting 400 watt MH Integral type comprising of aluminium anodized reflector, copper ballast, glass with gasket and goggles and including MH lamp 400 W complete all as specified and as directed.

Disconnection and taking down the unserviceable 250W High Bay light fitting and S&F High Bay light fitting 250 Watt MH Integral type complete with aluminium reflector, copper ballast with housing, glass with gasket and goggles and incluing MH 250 W lamp complete all as specified and as directed.

Disconnection and taking down the unserviceable light fitting 125W and S & F vertical integral well glass light fitting 125 Watt MH type including 125W lamp complete all as specified and as directed.

Disconnection and taking down the unserviceable fitting and S&F aviation obstruction light fitting including two Nos of GLS 100 W bulbs complete all as specified and as directed.

Disconnection and taking down the unserviceable Flame proof - flood light fitting 100 watt and S&F for Flame proof - WP flood light fitting 100 watt LED in LM6 construction integral type with inbuilt control gear box, driver and connecting wires etc complete all as specified and as directed.

Disconnection and taking down the unserviceable rotary switch and S&F Flame proof -WP rotary switch in LM6, 10 Amps complete all as specified and as directed.

Disconnection and taking down the unserviceable low integral well glass luminarie 125 W and S&F for New industrial low bay light fitting 80 watt LED energy saving environment friendly and robust IP-65 with high efficacy complete all as specified and as directed

Disconnection and taking down the unserviceable light fittings and S&F Sonara Bollard decorative Luminaire with 18 Watt CFL lamp complete all as specified and as directed

S&F LED highbay light fitting 120 Watts with housing IP -65 and IK 07, circular high pressure die cast aluminium housing and manufacture logo embossed on the housing and high transmittance tempered glass cover, optics lens with lens plate having NB and WB optics, system efficacy>120 lumens/watt, xitanium driver- IP 66 complying to IEC61347-2-13 certification like CE ENEC, ROHS, with rated life of 50000 hrs for driver at TC-80 degree celcius along with all safety features, thermal protections, protection against input over voltage<320 volt AC for 48 hrs, driver failure rate,0.2% per 1KHr @ TC 70-80 Degree Celcius, wattage 120 Watt, internal wiring teflon SDCM<5, CCT-5700, CRI>80, THD<20 at max load, third harmonics<20%, PF>0.95 colour temperature 6500k including taking down old unserviceable light fitting complete all as specified and as directed.

Supply, fix, test and commissioning 100 Watt LED flood light fittings, with High pressure die cast housing with lens IP 65 protection, powder coated CCT(k) 6000, asymmetric fixing to existing bracket including nut bolts of suitable size and electrically connected to the existing system including taking down existing fittings and fixtures complete all as specified and as directed.

Supply, fix, test and commissioning 70 Watt LED street light fittings, High Efficiency IP 66 protection, powder coated pressure die cast aluminium housing and clear injection moulded polycarbonate / toughened glass have multi chip on board LED and metal clad PCB. The minimum lumen output of the system shall be greater than 7200 lumens with minimum lumens per watt 101±3% and must maintain 70% of lumens output at 50000 bhrs, asymmetric fixing to existing bracket including nut bolts of suitable size and electrically connected to the existing system including taking down existing fittings and fixtures complete all as specified and as directed.

Disconnection and taking down the unserviceable GI bracket of size 40mm dia from the pole/ building and M&L for street light bracket made out of 40 mm dia GI tubing light grade upto 1.5 mtr long including bending, welding, drilling holes as required and fixing with flat iron clamps 50 x 6 mm thick (02 Nos) with suitable nut, bolts and washers to steel tubular/concrete poles, including preparation of steel and iron surface and applying two coats of aluminum paint over a coat of primer etc., complete all as specified and as directed.

om sai enterprises

Bismi Engineering

Siddique constructions