PROVISION OF REPAIR TO FLOORS BY PROVIDING VITRIFIED TILES IN LOGISTIC BLOCK ,REPAIRS TO DAMAGED DRAINS AND PROVN OF STRONG ROOM ALONGWITH CB CHEST AT CGDHQ - 15, OKHA UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

M&L Sand filling in floor.or in foundation etc, including watering and consolidation etc complete all as specified and as directed.

Excavating as in trenches n. exc 1.50 m wide and n.exc 1.50 m in depth; for cleaning blocked drains filled earth,mud,spoil ,vegetation of any description and getting out and removing away excavated material exc 250 m but n.exc .500 m and depositing where directed .

M & L Hard core (broken stone or boulders) of guage n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L moorum/red bajri filling in floors or pavings, laid in layers n. exc, 15 cm thick, spread, levelled and rammed including watering

M&L Plain cement concrete, type D2, (1:4:8, using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc all as specified and as as directed by engineer-in-charge. Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L Plain cement concrete, type B2, (1:2:4, using 40mm graded stone aggregates) as in surface channels and drains. etc all as specified and as as directed by engineer-in-charge. Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L Plain cement concrete, type B0, (1:2:4, using 12.5mm graded stone aggregates) as in coping/benching incl necessary form work. Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L for providing Pre-cast cement concrete type C1 ,1:3:6 (20 mm graded stone aggregate) block masonry with solid blocks, exc. 10cm in width and setting in cement mortar 1 :6 complete

M&L for providing precast cement concrete type B-1, 1 : 2 : 4 (using 20 mm graded coarse aggregate) as in cover slabs (for manholes etc) chullah hoods, chajjas, water troughts, mangers, shelves and similar acticles with plain faces set in CM 1 : 6. (Note : Reinforcement will be measured and paid seperatelly)

Cutting holes in stone walls of any description built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc. Half brick but not exc.one brick Note: The cost of making good the disturbed surfaces deemed to be included in the quoted rate.

M&L Porbandar stone masonary, block in course, well bonded and bedded, built in CM 1:6 all as specified and as directed by engineer-in-charge.

All as per item here-in-before but except blocks

M&L for 18-20mm granite (of any type) work (table rubbed and polished) in floors, window-cills, cooking platforms and the like in single piece set in 20 mm thick cement mortar (1:4) including pointing in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite .

M&L for 18-20mm granite (of any type) work (table rubbed and polished) in single piece, bullnosing/rounding to edges of stone slab and two No grip line for stair case treads, and the like set in 20 mm thick cement mortar (1:4) including pointing in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite .

M&L for 18-20mm granite (of any type) work (table rubbed and polished) in risers, steps, jambs and pillars etc set in 10 mm thick cement mortar (1:4) including pointing in white cement (1 : 2) using marble dust with admixture of pigment to match with shade of granite .

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5m but n exc 4 sqm complete all as specified.

S&F Brass 4 levers Mortice lock,vertical type,size 100 mm

S&F mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to GE 290, Gde E - 165, at any height complete all as specified and directed.

Fixing only by fabricating dismanted mild steel framed work such as grills, gratings, etc, with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work at any height.

S&F Mild steel work for bands, straps, supports or stays for rainwater ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts , clamps hold fasts & wall ties e.tc and similar small articles conforming to FE - 290, Gde E-165.at any height

M&L Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. etc complete all as specified and directed by Engr-in-charge.

M&L 75mm thick, Plain Cement concrete, type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of floors even and rough finished to receive topping layer complete all as specified and as directed by Engr-in-Charge.

M&L 20mm thick, Plain Cement concrete, type B-1, 1:2:4 (using 20mm graded stone aggregate) as in sub base of floors even and rough finished to receive topping layer complete all as specified and as directed by Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 9 to 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick screed bed in CM 1 : 6.

M&L for vitrified ceramic tiles light shade 9 to 10 mm thick polished, in vertical surfaces etc. set jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1 : 6.

M&L 80 mm thick, M-40 grade, machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006 complete all as specified

All as per item here-in-before but except paver blocks

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing tiles and rubbish off the premises

Taking down cement plaster on brick or concrete surfaces etc, including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15mm thick in CM 1:4 on fair faces of porbandar stone work or concrete surfaces, finished even and smooth without using extra cement all as specified

M&L Rendering 20mm thick on brick/concrete surfaces in patches of any size, at any height and location in CM 1:4 using Latex Power or equivalent as per manufacturer instruction complete all as directed by Engr - in -Charge Note : Latex Power will be measured & paid seperately

M&L Preparation of newly plastered surfaces of wall and applying Two coats of OBD over a coat of chalk white primer complete all as specified and as directed by Engr-in-Charge.

M&L Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of zinc chrome primer, complete all as specified and as directed.

M&L Preparation of old steel surfaces of any description over 10 cm girth, not otherwise described and applying one coat of synthetic enamel paint.

Demolition of brickwork or stone/boulder masonary, built in cement mortar including all quoin, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Dismantling of stone slab or paver block laid dry or laid dry and pointed of any description or thickness in florrs, aprons.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level).

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing from the site.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for

M&L for anti-corrosive coating with epoxy modified cementitious coating of Sikka top-Armatec 110 EPO @ 2Kg/Sqm or equivalent and mixed as per manufacturer instruction including preparation of steel & old concrete surfaces all as directed by Engr-in-Charge.

Supply only Latex Power or equivalent

S&F stainless steel of Grade 316 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,sheet sheeting for covering etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, steel sheeting or other covering, running rails and guides and hanging, also fastening and fixing complete

S&F stainless steel of Gde 316 framed work such as grills, gratings, etc, with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work of any height.

M&L for providing and fixing 10mm thick plaster of paris including for sunk or raised moulding ceiling (Gypsum anhydrous) to flat surface, GI Frame work for seamless ceiling comprising of GI Perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and applying two coats distemper complete all as specified and directed.

M&L Two coats of exterior emulsion paint on new/old plastered surfaces in approved camouflage pattern on external faces of RCC OHT walls, columns beams, projection, dome of capacity 1.00 Lakh litre of height 20 mtr by providing double legged steel scaffolding including scrapping old treatment, taking down detoriated wall/RCC surface/Ceiling plaster and plastering in CM 1:3 to match the existing surface and cleaning the OHT from inside by dewatering, accumulated mud, scrubbing with wire brush washing down the ceiling, wall, floor with bleaching powder and applying three coats of whitewsh and a coat of anti-infection soloution on all internal surface all as specified and directed. Make :-Asian Paints (Brand-Apex)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

M&L Two coats of exterior emulsion paint on new/old plastered surfaces in approved camouflage pattern on external faces of RCC OHT walls, columns beams, projection, dome of capacity 0.50 Lakh litre of height 25 mtr by providing double legged steel scaffolding including scrapping old treatment, taking down detoriated wall/RCC surface/Ceiling plaster and plastering in CM 1:3 to match the existing surface and cleaning the OHT from inside by dewatering, accumulated mud, scrubbing with wire brush washing down the ceiling, wall, floor with bleaching powder and applying three coats of whitewsh and a coat of anti-infection soloution on all internal surface all as specified and directed. Make :-Asian Paints (Brand-Apex)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

M&L Two coats of exterior emulsion paint on new/old plastered surfaces in approved camouflage pattern on watch towers of height upto 6mtr with suitable scaffolding and including scrapping old treatment ,taking down deteriorated wall / RCC Surface / ceiling plaster and plastering in CM 1;3 to match the existing surface complete all as specified and directed . Note : Make :-Asian Paints (Brand-Apex)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

Taking down carefully aluminium/copper point wiring (light,fan,socket or power) concealed and casing caping complete including fittings and fixtures such as switches,ceiling roses,pendants,regulators,sockets light fittings and making good the disturbed surfaces of walls/ceiling/floor etc. Note: The cost of making good the disturbed surfaces deemed to be included in the quoted rate

M&L Point wiring complete with 1.5 Sqmm single core PVC Insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volt grade down through and including non metallic rigid PVC heavy duty concealed conduit, min 20mm external dia,heavy duty, but shall be increased to suitable size, as per requirement in accordance with clause 19.125 of SSR Part I, ISI marked, including conduit accessories like bends,tees,junction box etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm earth wire, single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, fan regulators with required modules Make Finolex/Havells/ NICCO/Anchor (a) One light controlled by one,one way 5 Amps SP switch Note: The cost of cutting/chasing in walls/floors/ceilings wherever required shall be deemed to be included in the quoted rate.

Ditto all as per item no 51 above but one 3 pin socket outlet 6A on the independent board

Ditto all as per item no 51 above but one 3 pin socket outlet 6A on the same board

M&L Point wiring complete with 2.5 Sqmm single core PVC Insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volt grade down through and including non metallic rigid PVC heavy duty concealed conduit, min 20mm external dia,heavy duty, but shall be increased to suitable size, as per requirement in accordance with clause 19.125 of SSR Part I, ISI marked, including conduit accessories like bends,tees,junction box etc fixed concealed/recessed in wall or ceiling etc including 2.5 Sqmm earth wire, single core PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire for One 3 pin socket outlet. 15 amps,independent boardincluding modular type metal flush box with cover plate and frame of required module for mounting of modular switches, sockets, fan regulators with required modules Make Finolex/Havells/ NICCO/Anchor Note: The cost of cutting/chasing in walls/floors/ceilings wherever required shall be deemed to be included in the quoted rate.

S&F Modular Switch 1 way, 6 Amps, 1 modular complete all as specified and directed. Make: Legrand (Arteor)/Schneider (Zencelo)/Hager (Berker)

S&F Modular Switch 1 way, 16 Amps, 1 modular complete all as specified and directed. Make: Legrand (Arteor)/Schneider (Zencelo)/Hager (Berker)

S&F Modular Socket , 6 Amps, 2/3 pin combined 2 modular complete all as specified and directed. Make: Legrand (Arteor)/Schneider (Zencelo)/Hager (Berker)

S&F Modular Socket , 6/16 Amps, 2/3 pin combined 2 modular complete all as specified and directed. Make: Legrand (Arteor)/Schneider (Zencelo)/Hager (Berker)

S&F Modular Fan regulator,120 watt, 2 modular complete all as specified and directed. Make: Legrand (Arteor)/Schneider (Zencelo)/Hager (Berker)

Taking down old FTL and supply and fix in repair surface mounted LED Batten fitting 20W, with driver complete all as specified and directed including connecting cable from ceiling rose to terminal block of luminaire all as specified and directed. Make: Wipro (Trim Led NEO) or Equivalent in Philips

M&L Sub main wiring with two runs of 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I including conduit accessories like bends, tees, junction boxes etc including 2.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

M&L Sub main wiring with two runs of 4.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through and including PVC concealed conduit heavy duty grade ISI marked 25mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I including conduit accessories like bends, tees, junction boxes etc including 4.0 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ Finolex/ RR Kable/ KEI

Taking down existing submain wiring complete, including fixture and fittings, removing materials to stores for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and and making good the disturbed surfaces of walls/floor etc. Note: The cost of making good the disturbed surfaces deemed to be included in the quoted rate

Taking down existing ceiling fan/exhaust fan complete, servicing, repair of fan motor and replacement of fan motor and replacement of wornout parts and hanging of ceiling fan/fixing or exhaust fan including painting with synthetic enamel paint by spray including cavities with filler in situ and and making good the disturbed surfaces of walls/ceilings etc. Note: The cost of making good the disturbed surfaces deemed to be included in the quoted rate

SHREE CHAMUNDA ENTERPRISE

Harsh Infrastructure

K K Construction Co

V D JADEJA

natwarsinghdipsingh

SURESH ELECTRICALS

JAMNAGAR ELECTRIC AND MACHINERY CO