Construction of supply channel by way of cement concrete and raising of sump house for solar lift irrigation at Kako Shilikchey

Amount

Earth work in excavation by manual means in trenches for foundation ,drains, pipes ,cables etc.(Not exceeding 1.5mtr in width ) and for shafts, wells, cesspits and the like not exceeding 10sqm on plan ,depth up to 1.5mtr including disposal of excavated earth up to 1mtr from cutting edge, disposed earth to be leveled and neatly dressed in:

All kinds of soil 30%

Ordinary rock 50%

Hard Rock (BP) 20%

Dumping /filling of stone in horizontal on level excluding cost of stone but including all carriage complete.

Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering. All work up to plinth level 1:2:4 (1 cement: 2 course sand: 4 graded stone aggregate 20mm nominal size (nallah).Including all carriage complete.

Reinforced cement concrete work in wall (any thickness ), including attached pilasters, buttresses, plinthand string courses, fillets, columns, pillars, piers, abutments, postsand sturts etc.upto floor five level excluding cost of centring, shuttering,finishing and reinforcement. 1:1.5:3 (1 cement:1.5 coarse sand:3 graded crushed stone aggregate 20mm nominal size).including all carriage comlplete.

Reinforcement for R.C.C work including straightening cutting,bending, placing in position and binding all complete.Hot rolled deformed bars.and all carriages complete.

Centring and shuttering including strutting propping etc,and removal of form work for Walls (any thickness) incld. attached pilasters, buttresses, plinth & string courses etc. incl. form work for suspended floor Foundations etc, Complete job

Providing ,laying and fixing of Chain pulley for 02 No gate and pump including making of pump rest by Angle Iron during HFL and LFL complete Job as per the direction of Site Engineer

Pump Solar 25 HP SPE-30-19 Make :- Grundfos Supply and Installation of AC/ DC of solar Submersible pump permanent magnet mortar with 92 % efficiency & Combined efficiency not less than 70 %. The pump shall be multistage pump All metal surfaces of the pump and motor in contact with pumped media have to be made of stainless steel.SS304 or higher grade. The pump should be coupled with a permanent magnet canned type 6” motor.The motor shall be hermetically sealed with a dry stator completely encapsulated in stainless steel. 500 to 700 LPM @ 200 M head The pumps should be of SS304 made with impeller as per AISI304. Pump Speed should not be less than 3000 RPM and shall be suitable for permissible sand content with approval of CE, EAC. As per MNRE guidelines. CURVE TOLERANCE: - IS09906: 201233 and controlle all complete Job.

m/s mohd ali (BID ID -145997)

M/s Mohd Qasim (BID ID -146104)

M/S ZAINAB BEE (BID ID -146134)

MURTAZA ALI (BID ID -146016)

GH JAFFAR SILMOO (BID ID -146115)

M/S MOHD IBRAHIM (BID ID -146139)

M/S AJAZ ALI (BID ID -146102)

M/S Ashiq Hussain (BID ID -146098)