Construction of P.C.C. Road from Jamdiha Kali Mandir Road to Somar Rawani Residence under Baghmara Block, Dist. Dhanbad

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and tress girth upto 300 mm, removal of stumps of tree cut earlier and Clause 201 disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. (RCD Clause 201)

Construction of Embankment with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and meet requirement of Table 300-2. (RCD 3.16, 305)

Compacting Original ground supporting sub-grade Loosening of the ground upto a level of 500 mm below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300-2 for sub-grade construction. (RCD 3.20 case- i)

Construction of Subgrade and Earthen Shoulders Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted 300-2 (RCD 3.18, 305

FLANK FILLING Granular Sub-Base with Graded Material (Table :- 400-1) Gggstruction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.Rate per cum for grading-l Material ) (RCD 4.01A 401)

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing (RCD-6.2, 602)

Carriage of Materials (i) Cement Av. Lead 10 KMP

(ii) Sand Av. Lead 20 KMP

(iii) Stone Chips Av. Lead 30 KMP

(iv) Stone Metal Av. Lead 30 KMP

(v) Stone Dust Av. Lead 30 KMP

Goods & Service Tax (G.S.T.) -

Labour Cess -