Repair/ Renovation of Offical residence of Superintending Engineer PWD RnB Circle Anantnag (Part I)

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing & fixing wood work in frames of doors, windows & other frames, wrought framed & fixed in position including SS expansion fastners for brick/concrete work in (including cost of all material, leads, lifts & carriages etc upto site of work complete). Imported wood

Providing and fixing in position factory-made / site-fabricated built-in cupboards, almirahs and shelving units of approved size, layout and design, fabricated out of waterproof commercial grade plywood conforming to relevant IS standards, using 19mm thick plywood for shutters, sides, top and bottom panels, 12mm thick plywood for shelves and intermediate members and 6mm thick plywood for back paneling, finished on all exposed external faces with 2mm thick decorative laminate (Dulmicka) of approved shade and pattern duly bonded with approved adhesive, and finishing internal faces with 0.8mm laminate / synthetic enamel as approved, including providing and fixing all necessary fittings and fixtures such as auto hinges, magnetic catches, locking arrangements, handles, tower bolts, drawer channels, shelf supports, PVC edge banding, screws, buffers and approved hardware, including cutting, grooving, edge finishing, alignment, shutter fixing and all incidental works, complete in all respects as per approved design and direction of Engineer-in-Charge.

Providing and applying high gloss wood polish finish on wooden surfaces such as doors, windows, cupboards, paneling etc., including complete removal of existing polish / paint by mechanical sanding using emery paper / orbital sander, surface preparation, filling of dents and open grains with approved wood filler, smooth rubbing and leveling, followed by application of one coat of wood sealer, necessary staining to achieve uniform shade, and applying minimum three coats of melamine / PU / synthetic clear wood polish to achieve approved high gloss finish, with intermediate sanding between coats, including final buffing, touch-ups and finishing, complete in all respects including cost of all materials, labour, tools & tackles as per direction of Engineer-in-Charge.

Providing & laying 18mm minimum thick pre-polished (best quality ) Granite stone slabs (non water absoring) in counters, vanities etc on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand)/12mm thick backing of cement mortar 1:3 (1 cement : 3 coarse sand) and joined with white cement slurry mixed with pigment or with standard tile made compound to match the shade of the slab. Including rounding, rubbing, clamping, curing, moulding, granite polish & making grooves as required complete (Note: The stone slab shall be cut to required size and laid to the required pattern including rounding, chamfering, bull nosing of the edges as directed. Actual area of slab, as laid shall be measured) Sample to be approved by Engineer-in-charge. (including cost of all material, leads, lifts and carriages etc upto site of work

Providing and fixing Ist quality ceramic Glazed Digital Wall Tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 1200x600 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing Ist quality ceramic Antiskid Floor Tiles conforming to IS : 13753 of miniumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 300 x 300 mm. (including cost of all material, leads, lifts and carriages etc upto site of work complete).

Providing and fixing plained eaves boarding of (300 x 40mm ) N/S with necessary grooves and chamfer as per detailed drawing.(ornamental) (Second Class Kail Wood) incl cost of nails.

P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position in budloo wood (Ceiling Joists). including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete job. incl cost of nails / screws all complete as approved by Engineer-in-charge (including cost of all material, leads, lifts and carriages etc upto site of work complete). Soffits

Providing and fixing of factory pressed 35mm thick Medium Density Fibreboard (MDF) carved door shutters of approved design and pattern, including machine carving work as per approved drawing, edges properly lipped and finished, complete with necessary hardwood internal frame support where required, suitable for fixing on existing/new door frames. The item shall include providing and fixing of all necessary fixtures and fittings such as SS butt hinges (heavy duty), mortice lock/door handle set, tower bolts, door stopper, screws, etc. The shutter surface shall be finished with one coat of primer and two or more coats of approved shade Decco paint applied by spray gun to achieve smooth, uniform and high gloss/matt finish as directed. The rate shall include surface preparation, putty work, sanding, polishing of edges, handling, carriage, loading/unloading, all leads and lifts, taxes, tools and labour complete in all respects.

P/F of 3.5mm hick glass panes with all fittings complete job

Providing and laying approved quality Iranian carpet of required shade, pattern and thickness in approved locations, including surface preparation, cutting to required size and shape, proper stretching, alignment and fixing over underlay using approved adhesive / gripper system, including necessary trimming at edges, finishing along walls, columns and fixtures, and ensuring wrinkle-free and level surface, complete in all respects including cost of carpet, underlay (if required), labour, tools & tackles and all incidental works as per direction of Engineer-in-Charge

Providing/Fixing of door window stard wire fittings

A) T.Bolts

B) Handles

C) L-drops (Link)

Egagnent of Carpenters for Refixing / Repair of Old CGI /Khatamband Ceeling

Egagnent of Labours for Dismantling of Windows Old Damged Panelling and StairCase and tiles

Sanitary Fixtures:

Providing and fixing white glazed vitreous (European style) P trap water closet with solid white plastic seat and lid, C.P.brass hinges and rubber buffers with 3/6 dual flush concealed flush set including reqd. fitting, CP actuator, CI chair etc. complete.Single Unit

Providing and fixing white glazed vitreous china wash basin (Flat back counter mounted/ oval or flat back) with 32mm C.P. brass waste of standard pattern, 32mm dia C.P. brass bottle trap and union, 32mm dia C.P. pipe to wall and C.P. wall flange, CP brass pillar cock, CP brass angle valve with braided connection pipe complete with fixing Brackets painted white, required C.P. brass screws, nuts, bolts, consumable complete, cutting and making good the walls wherever required.

Half threaded waste coupling:

Bottle trap:

Pillar cock

Angle Valve

15mm dia braided connection pipe.

Providing and fixing Salem Stainless Steel A ISI 304(18/8) Kitchen Sink As per IS 13983 with CI Brackets ans stainless steel plug including painting of fttings and brackets, including cutting(GRANITE) and good the walls whereever required(900x1500)

Providing and fixing 20mm dia C.P. brass quarter turn angle valves with C.P. copper connecting pipe, union nut and C.P. brass wall flanges.

Providing and fixing 15mm dia C.P. brass bib cocks with wall flange.

Two way qauter turn bib cock

Providing and fixing of liquid soap dispenser with brackets fixed to wooden cleats with C.P. brass screws

Providing and fixing of CP brass Health faucet with 8mm dia 1 mtr. Long PVC tube and wall hook fixed to wall with rawl plugs and CP brass screws complete.Make Jaquar

Providing, supplying, installation, testing and commissioning of Hot & Cold RO Water Purifier (Aquaguard or equivalent approved make) having multi-stage purification system including RO, UV, UF, MTDS / taste controller with inbuilt hot and ambient water dispensing facility, suitable storage capacity, stainless steel hot water tank, child safety lock, auto shut-off and energy saving features, complete with wall / counter mounting arrangement, inlet and outlet connections, food grade tubing, pressure reducing valve, isolation valve, non-return valve, electrical connections, drainage arrangement, necessary civil and plumbing connections from nearest water supply line, connection to drain and power point, fixing with brackets, flushing, testing and commissioning, including all accessories required for proper functioning, complete in all respects as directed by the Engineer-in-Charge.

Providing, supplying, installation, testing and commissioning of terrace mounted water booster pump set for boosting water from overhead tank to distribution system, comprising suitable capacity centrifugal / pressure booster pump with motor, pump control panel, pressure switch, pressure tank (if required), non-return valve, isolation valves, suction and delivery piping connections, vibration pads, foundation bolts, electrical connections from nearest point, necessary fittings, testing, trial run and commissioning, complete in all respects including fixing on terrace near tank and making operational as directed by the Engineer-in-Charge.