Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.6 LAccepted-AOC | 1 | Accepted-AOC lowest quoted | |
| 2 | 2₹1.7 L+₹14,981.89 (9.53%)Rejected-AOC NADAPURAM GRAMA PANCHAYAT POST KALLACHI 673 506 | KOZHIKODE | KERALA | 673506 | 2 | Rejected-AOC highest quoted | |
| 3 | 3₹1.6 L+₹386.28 (0.25%)Rejected-AOC | 3 | Rejected-AOC highest quoted |
| Sl No | Description | Qty | Unit | ANANTHARAMAN L1 | SIJON NELLIPPILLY L2 | Harikrishnan L3 |
|---|---|---|---|---|---|---|
| 1.0015 | ||||||
| 1.00 | OD139828/2025-2026:Providing and fixing precoated galvanized iron profile sheets (size, shape, and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total printed on 01-08-2022 12:19:59 page 41 coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides. of the sheet and polyester top coat 15-18 microns. The sheet should have a protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in a single length up to 12 meters or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters, and trusses and including cutting to size and shape wherever required | 49.43 | sqm | 567.69 ₹28,059.78 Lowest | 600 ₹29,656.8 | 621.1 ₹30,699.73 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 296.57 | kg | 170.96 ₹50,701.27 | 160 ₹47,450.88 Lowest | 187.05 ₹55,473.04 |
| 1.00 | OD224938/2025-2026:Providing and fixing FRP Rain water collection gutter pipe 3 mm thick or nearest available size
with step jointing of 50mm at site (150 mm) of approved make including cost of necessary
fittings, labour for fixing, scaffolding charge etc. complete | 20.4 | metre | 488.09 ₹9,957.04 Lowest | 500 ₹10,200 | 543.02 ₹11,077.61 |
| 1.00 | OD224939/2025-2026:Ridge capinging with pre painted galvanised steel sheets .35mm thick 45cm wide including all
cost and materials, conveyance, labour charges etc. complete. | 7.7 | metre | 607.01 ₹4,673.98 | 600 ₹4,620 Lowest | 664.13 ₹5,113.8 |
| 1.00 | 50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall | 26.65 | metre | 227.28 ₹6,057.01 | 200 ₹5,330 Lowest | 248.67 ₹6,627.06 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.3 | cum | 8,441.68 ₹2,507.18 Lowest | 9,235.96 ₹2,743.08 | 9,235.97 ₹2,743.08 |
| 1.01 | 17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | 1 | each | 2,339.15 ₹2,339.15 Lowest | 2,559.25 ₹2,559.25 | 2,559.24 ₹2,559.24 |
| 1.01 | 50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall | 2.6 | metre | 281.82 ₹732.73 | 200 ₹520 Lowest | 308.34 ₹801.68 |
| 1.01 | 50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall | 3 | metre | 397.75 ₹1,193.25 | 300 ₹900 Lowest | 435.17 ₹1,305.51 |
Tender Value
₹1.7 L
EMD Value
₹4,306
Closing Date
15 Sept 2025, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
ARYA VISWAN
ASSISTANT ENGINEER PARAPPUKKARA GP NANDIKKARA
Annual Plan 2025 26 Hand Washing Unit and Maintenance at GLPS Parappukkara GP Ward 2 General Civil Work
2025_LSGD_792108_1
05/AE/ET/25-26
Open Tender
Civil Works - Others
Item Rate
240 days
PARAPPUKKARA G P
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,306
Yes
29 Sept 2025
1 Sept 2025
16 Sept 2025
1 Sept 2025
15 Sept 2025
1 Sept 2025
Amount
OD139828/2025-2026:Providing and fixing precoated galvanized iron profile sheets (size, shape, and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total printed on 01-08-2022 12:19:59 page 41 coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both sides. of the sheet and polyester top coat 15-18 microns. The sheet should have a protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in a single length up to 12 meters or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling/self-tapping screws of size (5.5x55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters, and trusses and including cutting to size and shape wherever required
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
OD224938/2025-2026:Providing and fixing FRP Rain water collection gutter pipe 3 mm thick or nearest available size with step jointing of 50mm at site (150 mm) of approved make including cost of necessary fittings, labour for fixing, scaffolding charge etc. complete
OD224939/2025-2026:Ridge capinging with pre painted galvanised steel sheets .35mm thick 45cm wide including all cost and materials, conveyance, labour charges etc. complete.
50.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
17.7.3:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall
50.18.9.16.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall
15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
OD139784/2025-2026:Supplying and fixing Pressed Steel Windows and Ventilators of standard pattern with frames with glazed shutters 4 mm thick plane glass as per profile of sections 82*62mm, 12mm dia. rod at 10 cm c/c, 25*5mm flat 6 numbers with 75mm M.S hinges, 50mm M.S hook, 125mm M.S stay and handle for windows with section 105*60mm without steel shutters, made of sections 75*30mm for outer styles and horizontal members and then inserted with Aluminium beadings.(data derived for 150 x150 cms three panelled)
13.98.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work
OD176833/2025-2026:engaging carpenter
SIJON NELLIPPILLY (BID ID -2338234)
Harikrishnan (BID ID -2337756)
Bidder Name
ANANTHARAMAN
SIJON NELLIPPILLY
Harikrishnan
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1309166.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .