CONSTRUCTION OF GSE PARKING SHED, COVER SHEDS, SEPTIC TANK WITH SEWAGE LINES AT HOTS A AND HOTS B AND PROVISION OF HEALTH FAUCET IN MAP QTRS AT AFS BIDAR

Amount

Schedules of Works

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and as directed by Engineer-in-Charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cu m, getting out in hard / dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed by Engineer-in-Charge.

Material & Labour Plain cement concrete 1:4:8 (40 mm graded aggregate) type D2, as in foundations, filling and mass concrete complete all as specified and as directed.

Material & Labour Plain cement concrete 1:3:6 (40 mm graded aggregate) type C2, as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:6 complete all as specified.

Material and labour for, mild steel work, as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290 Grade-165, complete all as specified and as directed.

Material and labour for, mild steel, framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, steel conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:6 complete all as specified.

Material & Labour Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for Preparing of New plastered surface of wall and applying two coats of distemper oil bound over a coat of chalk whitening, complete all as specified and as directed.

Material & Labour, two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces including preparation, of any description, exceeding 10 cm width or girth, complete all as specified and as directed.

Material & Labour, two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces including preparation, of any description, not exceeding 10 cm width or girth, complete all as specified and as directed.

Material and labour for Sand cushion (using natural sand or stone dust) under floors of paver blocks/tiles compacted by using plate compactor or other suitable mechanical method etc, complete all as specified and as directed.

Material & Labour Hardcore of Broken stone or boulders gauge not exc.63 mm , deposited, spread and levelled in layer not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material & Labour 75 mm thick plain cement concrete Type D-2, 1:4:8 (40 mm graded aggregate) as in sub base for floor complete all as specified and as directed.

M & L Cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in kerbs/benching, coping including necessary form work etc complete all as specified and as directed.

Material & labour for Machine pressed precast concrete interlocking paver blocks/tiles, any shape & size with grey cement and pigment confirming to IS-15658-2006 of 80 mm thickness, M-40 grade complete all as specified and directed. (Note: Sand cushion measured and paid separately)

Material and labour for, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material and labour for, Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Returning, filling in (soils) including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and as directed.

Moorum / red bajri filling in floors or pavings, laid in layers not exc. 15 cm thick, spread, levelled and rammed including watering, well ramming complete all as specified and as directed.

Material and labour for surface mounted point wiring for light points / fan point / bell point controlled by one switch (using red, black and green coloured wires as per colour coding) complete with 1.5 sq mm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi stranded copper conductor cable 1100 volts (ISI marked) drawn through and including PVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and accessories i.e., pipe bend, hook, elbow, junction boxes, 2 mm thick galvanised steel pressed sunken box (Min 60 mm deep and of suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switch / socket / regulators, etc., provision of 1.5 sq mm single core FRLSH PVC insulated multi stranded copper conductor wire continuity as earth wire connected to earth dolly, etc., complete all as specified and as directed. Note: Switches / sockets / bells / regulators will be measured and paid for separately under respective items.

All as per Serial Item No 23 here-in-above, but for 15 Amps socket outlet with 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed.

All as per Serial Item No 23 here-in-above, but for one socket outlet of 5 Amps controlled by one switch (on independent board and not below any other switch board) complete all as specified and as directed.

Supply and fix, single pole one way 6 Amp, switch modular type, 1 Module, with all accessories all as directed by Engineer-in-Charge,

Supply and fix, 16 Amp, switch modular type, 2 Module, with all accessories all as directed by Engineer-in-Charge,

Supply and fix, 6 Amp, socket modular type, 2 Module, 2/3 pin combined, with all accessories all as directed by Engineer-in-Charge,

Supply and fix, 6/16 Amp, socket modular type, 2 Module, 2/3 pin combined, with all accessories all as directed by Engineer-in-Charge,

Supply and fix, ceiling rose 3 terminal 5 Amps 230 volts PVC / Polycarbonate, insulated body complete all as specified and as directed.

Supply and fix, MCB DB TPN 4 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP-43 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

Supply and fixing, metal plug and socket sheet metal enclosure, 3P, (functional unit) 32 Amps capacity with provision of TPN MCB 32 Amps, grouted flush to walls, complete all as specified and as directed.

Supply and fix MCCB, TPN 40 to 100 A, complete all as specified.

Supply and fix, MCB SPN 5 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix, MCB SP 6 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix, LED industrial tube light fitting of LED T5 tube lights (65000K) environmental friendly energy efficient of 40 W, including electric connection with PVC copper flexible twin core cable 1 sq mm from ceiling rose to light fitting complete all as specified.

Material and labour for Sub main wiring / power wiring complete with two runs of 6 Sqmm, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of 25 mm dia rigid non metallic PVC conduit pipe and accessories on surface wall/floors/ with one run of PVC insulated, 6 Sqmm FRLS copper conductor for earth continuity complete all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

Material and labour for Sub main wiring / power wiring complete with 4 runs of 6 Sqmm, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of 25 mm dia rigid non metallic PVC conduit pipe and accessories on surface wall/floors/ with one run of PVC insulated, 6 Sqmm FRLS copper conductor for earth continuity complete all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

Material & Labour for, providing earthing with GI earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to depth of not less than 2.25 metre deep below normal ground level with top edge of the plate not less than 1.5 metre below ground level connected to GI earth wire of 4 sq mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe of 40 mm light grade up to 3 m height above GL, and water pipe of 20 mm dia GI pipe medium grade, with socket and plug 30 cm above GL, including necessary earth work in any type of soil, PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) earth chamber and PCC 1:2:4 type B- 1 , RCC cover slab 50 mm thick with 6 mm dia MS bars, 75 mm c/c, complete all as shown in SSR Pt - 1 electrical plate No 3 complete all as specified and as directed. NOTE :- Unit rate Quoted is deemed to include the cost or excavation and earth work, RFR, Removal in any type of soil, PCC Chamber, funnel , RCC Cover Slab, GI protection pipe 40 mm dia shall be provided up to 7.5 m length etc complete.

Supply, laying, jointing, testing and commissioning of LT UG XLPE cable, 1100 V Grade, of size 3.5 Core 25 Sq mm, PVC sheathed, heavy duty armoured multi stranded aluminium conductor IS 7098 marked, laid in trenches / ducts / fixed to pole / walls / laid under road crossing / paths / drains / culvert or encased in protection pipe complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.50 m in depth and getting out in soft / loose soil complete all as specified and as directed.

Material and labour for sand cushion (using natural sand) to UG cable for protection of cables 23 cm thick in layers (8 cm thick before laying cable and 15 cm after laying of cable, punned down to 18 cm thick complete all as specified and as directed. Note : Punned thickness only will be measured and paid for.

Supply and fix, unreinforced Pre-cast concrete cable covers, LV, Type I, flat of size 250 mm x 150 mm x 40 mm, made of M20 grade concrete complete all as specified.

Supply and lay 40 mmm dia GI steel tubing light grade with fittings laid in trenches or fixed on walls / floors etc., complete all as specified.

Supply and lay 50 mmm dia GI steel tubing light grade with fittings laid in trenches or fixed on walls / floors etc., complete all as specified.

Material and labour for cutting road / hard standing up to 45 cm width and depth of road for laying cable protection pipes and filling with Plain Cement Concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified.

Dismantling of floor, hearth or wall tiles, including backing coat and screed bed, and removing debris outside MD land complete all as specified and as directed.

Material & Labour 25 mm thick plain cement concrete Type B0, 1:2:4 (12.5 mm graded aggregate) as in flooring complete all as specified and as directed.

Material and labour for providing non skid coloured ceramic tile flooring, area of each tile exceeding 0.06 Sq m and not exceeding 0.11 Sq m, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles, including laying screed bed of 15 mm thick in CM 1:6, complete all as specified.

Material and labour for, providing Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the adjacent tiles, including backing coat of 10 mm thick in CM 1:4, complete all as specified.

Taking down, GI tubing of 15 mm bore, complete all as specified

M&L for Galvanized steel water tubing medium grade with complete all fittings such as elbow, unions, nipples, tees, bends, short pieces, connectors, back-nuts, caps, plugs, diminishing pieces and sockets etc as per site requirement of 15 mm dia GI pipe line complete all as specified and directed by EIC.

Supply and Fixing, 15mm bore CP 2- Way bib cock double handle with wall flanges, glossy finish complete all as specified and as directed. Make: Prayag CAT No. PIS-12 or Techno commercial equivalent of approved makes specified here-in-after.

Supply and Fixing, Brass CP Health Faucet with 1 m SS Chrome plated tube & hook complete all as specified and directed. Make: Prayag CAT No. BEA-81 or Techno commercial equivalent of approved makes specified here-in-after.

Taking down unserviceable bib taps complete all as specified and as directed by Engineer-in-Charge.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and not exceeding 1.50 m in depth and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches exceeding 1.50 m in depth and not exceeding 3 m for foundations or for shafts, wells, cesspits, manholes, pier holes etc. not exceeding 10 Sqm on plan and getting out in hard / dense soil complete all as specified and as directed.

Material & Labour for Brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in cement mortar 1:6, complete all as specified and as directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material & Labour for RCC, Type B-1 (1:2:4) (20mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Use and waste formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pilasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.

Material & Labour for RCC, Type B-1 (1:2:4)(20mm graded aggregate) Walls, retaining walls, basement walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

Material & Labour for RCC, Type B-1 (1:2:4)(20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and as directed.

Material & Labour for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking bending spirally for handle, rungs and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, as in cover slabs all complete all as specified and as directed.

Material & Labour for rendering 15 mm thick on fair faces of brick work / concrete surfaces in cement mortar 1:4 mixed with approved water proofing compound finished even and smooth with out using extra cement complete all as specified and as directed. Note :- Supply only of water proofing compound shall be measured and paid separately.

Supply only Liquid water proofing compound, complete all as specified and as directed.

Material & Labour for Extra for forming fair finished channel or drain 30 cm inner girth in cement concrete using extra cement including mitred / stopped ends, forms mould etc complete all as specified and as directed.

All as per Item No 70 here in before but Add or deduct for each 25 mm girth or part thereof over or under 30cm, complete all as specified and as directed.

Material & Labour for Providing cement concrete PCC 1:3:6 type C-1 mix using 20 mm graded stone aggregate as in bed blocks / coping etc including necessary form work complete all as specified and as directed.

Material & Labour for Providing cement concrete PCC 1:2:4 type B-1 mix using 20 mm graded stone aggregate as in benching inside manholes etc complete all as specified and as directed.

Material & Labour of Loose filling with broken brick aggregates of gauge 40 to 80 mm in soakage pits, soakage wells, etc

Material & Labour for 150 mm dia bore reinforced concrete pipes, class NP- 2 laid and jointed complete with collars complete all as specified and as directed.

Material & Labour for Providing cement concrete PCC 1:3:6 type C-2 mix using 40 mm graded stone aggregate as in bed to drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid & tested complete all as specified and as directed.

Supply & Fixing 110mm dia PVC (SWR) pipes single socketed type B in any length with rubber joints fixed to walls etc complete.

Supply & Fixing 75mm dia PVC (SWR) pipes single socketed type B in any length with rubber joints fixed to walls etc complete.

Supply & Fixing 75mm dia PVC (SWR) pipes single socketed type A in any length with rubber joints fixed to walls etc complete.

Supply & Fixing PVC (SWR) bends 110mm dia any radius with access door

Supply & Fixing PVC (SWR) bends 75 mm dia any radius with access door

Supply & Fixing Salt glazed stoneware gully traps of 150x150mm square mouthed type 'P' complete all as specified and directed.

Material & Labour Plain cement concrete 1:2:4 (40 mm graded aggregate) type B2, as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for mild Steel work as in poles, struts, columns, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

Material and labour for, Mild steel flat iron for wind tie securing bolts, posts including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

Material and labour for multi wall polycarbonate sheet of minimum 4 mm thick in any colour, fixed with self tapping screws, washers etc., fixed as straight or curved in shape as in roof covering / cladding, etc., complete all as specified.

SAYED MUSTAQ AHMED (BID ID -3354186)

Mr Madhusudhan Kotarki (BID ID -3355750)

Siddique constructions (BID ID -3355629)

AMAR CONSTRUCTION (BID ID -3354048)

M/s.Santosh Kotarki (BID ID -3354535)

NAYANA CONSTRUCTIONS (BID ID -3352397)

M/S RUDRAPPA CONSTRUCTIONS (BID ID -3354580)