Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.7 LAccepted-AOC VILL KHUDDAR P O BASSI JOGINDER NAGAR DISTT MANDI H P | ₹3.7 L Quoted ₹3.8 L | L1 | Accepted-AOC Awarded |
| 2 | L2₹3.8 L+₹1,820.91 (0.49%)Rejected-AOC JOGINDER NAGAR | ₹3.8 L+₹1,820.91 (0.49%) | L2 | Rejected-AOC Rejected Being a L2 |
| 3 | L3₹3.8 L+₹7,593.15 (2.02%)Rejected-AOC 0 MATADIN KAKRAHI KAKRAHI BHARTHANA ETAWA ETAWAH UTTAR PRADESH 206242 | ETAWAH | UTTAR PRADESH | 206242 | ₹3.8 L+₹7,593.15 (2.02%) | L3 | Rejected-AOC Rejected Being a L3 |
| Sl No | Description | Qty | Unit | SANJEEV KUMAR L3 | Ram Chander Paul L2 | DHARAM VIR L1 |
|---|---|---|---|---|---|---|
| 1.00 | Steel work welded in built up sections, trusses and framed work, including cuting, hoisting, fixing in position and applying a priming coat of red lead paint. In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cros beams, hip and jack reflers, purlins connected to common rafters and the like. | 2,011.57 | Kg | 98.1 ₹2,32,859.34 | 100 ₹2,37,365.26 | 92.1 ₹2,18,617.43 Lowest |
| 2.00 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 122.98 | Sqm | 660.5 ₹95,849.38 | 500 ₹72,558.2 Lowest | 698 ₹1,01,291.25 |
| 3.00 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 14.5 | Rmt | 440.1 ₹7,530.14 | 400 ₹6,844 Lowest | 458 ₹7,836.38 |
| 4.00 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below | 2 | Each | 203 ₹479.08 | 100 ₹236 Lowest | 205 ₹483.8 |
| 5.00 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood | 0.11 | Cum | 85,839 ₹11,141.9 Lowest | 90,000 ₹11,682 | 87,839 ₹11,401.5 |
| 6.00 | Providing and fixing panelled shutters for doors, windows and clarestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: - Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock/ Tuni Local wood 35 mm thick shutters. | 4.02 | Sqm | 1,791 ₹8,495.79 Lowest | 2,500 ₹11,859 | 1,896 ₹8,993.87 |
| 7.00 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Kiln seasoned and chemically treated hollock/ Tuni Local wood 35 mm thick shutters | 2.65 | Sqm | 2,352 ₹7,354.7 Lowest | 2,500 ₹7,817.5 | 2,452 ₹7,667.4 |
| 8.00 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Kiln seasoned and chemically treated hollock/ Tuni Local wood 30 mm thick shutters | 1.38 | Sqm | 2,112 ₹3,439.18 Lowest | 2,300 ₹3,745.32 | 2,212 ₹3,602.02 |
| 9.00 | Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.5 mm thick instead of 4 mm thick. | 2.15 | Sqm | 222 ₹563.21 Lowest | 1,200 ₹3,044.4 | 232 ₹588.58 |
| 10.00 | Providing and fixing bright finished mild steel helical door spring (superior quality). | 2 | Each | 431 ₹1,017.16 | 400 ₹944 Lowest | 432 ₹1,019.52 |
Tender Value
₹3.7 L
EMD Value
₹3,749
Closing Date
8 Aug 2026, 10:00 amClosed
Resident Engineer
Addl. Superintending Engineer, Bassi Power House Division, HPSEBL, Jogindernagar
Tender for providing and fixing sheet roofing over crane structure near control room at Chhaprot under R.E. Bassi Power House Division HPSEBL Joginder Nagar
2026_HPSEB_140210_1
REB/DB-Tender(C)-03/2026-27
Open Tender
Civil Works
Item Wise
90 days
RE Office Bassi
As per bid document
7 documents required · 7 mandatory
₹590
₹3,749
27 Aug 2026
29 Jul 2026
10 Aug 2026
29 Jul 2026
8 Aug 2026
29 Jul 2026
29 Jul 2026 - 8 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Steel work welded in built up sections, trusses and framed work, including cuting, hoisting, fixing in position and applying a priming coat of red lead paint. In beams joists channels, angles, tee, flats with connecting plates or angle cleats as in main and cros beams, hip and jack reflers, purlins connected to common rafters and the like. | 2,011.57 | Kg | - | - |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 122.98 | Sqm | - | - |
| 3 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) | 14.5 | Rmt | - | - |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below | 2 | Each | - | - |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood | 0.11 | Cum | - | - |
| 6 | Providing and fixing panelled shutters for doors, windows and clarestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: - Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock/ Tuni Local wood 35 mm thick shutters. | 4.02 | Sqm | - | - |
| 7 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Kiln seasoned and chemically treated hollock/ Tuni Local wood 35 mm thick shutters | 2.65 | Sqm | - | - |
| 8 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws Kiln seasoned and chemically treated hollock/ Tuni Local wood 30 mm thick shutters | 1.38 | Sqm | - | - |
| 9 | Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) 5.5 mm thick instead of 4 mm thick. | 2.15 | Sqm | - | - |
| 10 | Providing and fixing bright finished mild steel helical door spring (superior quality). | 2 | Each | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
TERMSANDCONDITIONSC03.pdf
Tender Documents • 1.16 MB
BOQ_207923.xls
BOQ • 0.24 MB
ADDITIONALTERMSANDCONDITIONSC03.pdf
Additional Documents • 0.20 MB
CORRIGENDUMC03A.pdf
PDF • 0.73 MB
CORRIGENDUMC03.pdf
PDF • 0.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .