CONSTRUCTION OF 1000 MT WAREHOUSE ANDPROCESSING SHED OF 510 Sq M

CONSTRUCTION OF 510.00 Sq.Mt. Machine Shed And 1000 MT GODOWN

Excavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filing, ramming, watering including shoring and strutting etc complete (Lift 1.5 m to 3.0 m)

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming. watering etc. complete

Fly ash conforming to IS: 3812 ( Part II &I) atHMP Plant / Batching Plant / Crushing Plant

Filing in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc complete

Providing preconstructional anti-termite treatment as per I.S.6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete. With natural sand/V SI quality Artificial Sand

Providing and laying in situ/Ready Mix cement concrete M 20 of trap/graniite /quartzile gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc including balling out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V S. I quality Artificial Sand

Providing and laying Castin nitu/Reaily Mix cement concrete M-20 of trap/ granite /quartzite gneissmetul for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying pumping compaction finishing the formed surfaces. with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface ar roughening if special finish is to be provided and curing ete complete (Espluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete 8atch mix plant (Pan mixer) etc complete. With natural sand/V.SI quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite /quartzite/ gneiss matal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and cuning etc. complete (Excluding reinforcement and structural steel) with tuby automatic micro processor based PLC with SCADA enabled reversible Drum Type micer/ concrete Batch mix plant (Pan moxer) etc complete With natural sand/V.SI. quality Artificial Sand

( PLATFORM LANDING CONCRETE ) Providing and laying Cast-in-situ/Ready Mix cement concrete M-20 of trap/granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings, including steel centering, formwork, cover blocks, laying/ pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite / quartzite /gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting roughening them if special finish is to the provided, finishing uneven and honey combed surface and curing etc complete The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc (Wooden centaning will not be allowed)

Providing and foong in position TMT-FE-500 bar reinforcement of various diameters for RCC pile caps footings, foundations, stats, beams columns, canopies staircase newels chajjas, litels pardis, copings, fins, wiches Jete an per detailed designs, drawings and schedules including cutting bending, hooking the tiers, biriding with wires or tack welding and supporting as required complete

Providing second class Burnt Brick masonry with conventional/ S type bricks in cement mortar 1:6 in foundations and plinth of inner walls in plinth edernal walls including bailing out water manually, striking joints on unexposed faces, raking out joints an exposed faces and watering etc. Complete

Providing second class BurntBrick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete

Providing internal cement plaster 12mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc.

Providing internal cement plaster 20 mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc.

Providing and applying two coats of waterproof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.

(SIDE VENTILATOR) Providing and fixing steel ventilator fully glazed, partly fixed as per detailed drawing, with hot-dip zinc coating, including fabricating glazing with plain/ obscured glass panes 5mm thick and approved type quality, and iron oxidized fixtures and fastening with guard square bars 12 mm, 10 cm c/c, and oil painting 2 coats, etc. Complete.

Providing and laying in situ cement concrete M- 30 with tremix treatment for 200 mm thickness for flooring with groove cutting of 4mm wide and 20 mm deep with necessary refilling with bitumen etc. complete.

(A) CIVIL WORK OF WH BUILDING Excavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filing, ramming, watering including shoring and strutting etc complete (Lift upto 1.5 m)

Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hotdip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates, transporting, straightening, cleaning, fabricating and erecting in position.

Providing and fixing colour coated Zincalume (R) AZ150 ( min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 045 mm Base Metal Thickness (BMT) (0.5 mm TCT), H strength steel with min 550 MPa yield strength, metalic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43 4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface Profile sheet shall have nom 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib

Roof Accessories Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-

Turbo Ventilator Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of 2mm thk clear 1.020 mtr wide & 1.7 mtr long.

Roof Gutter (Assumed Girth- 600 mm) PPGI 0.5 mm Thk. Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer in charge

Downtake Pipe Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifi cations and as directed by the Engineer-in-Charge /

Providing and Fixing rolling shutter fabricated from steel laths ofminimum thickness 0.9 mm with lock plate of 3.15 im thickness red with 35 x 35 x 5 mm angle section had with sliding bet and handles for both sides, deep MS channel section of eph and hickness hot less than 65 mint and 3.15 mm respectively with hond at aangements MS. Bracket plate 300 x 300 x 3. 15 mm male and shape with square bar, suspension shaft of in 32 mm diameter, hood Cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and warms high grade cast iron or mid steel and one coat of red lead primer etc. complete (I.S. 62481979) (Without mechanical near)

Polycarbonate Sheet Supply & Fixing of 2mm thk polycarbonate sheets as per drawing & as directed by engineer in-charge.

(B). PEB WORK ABOVE PLINTH Providing structural steel work in trusses, other similar trussed purlins and members with all tracing gusset plates eto, as per detailed designs and drawings or as drected including cutting, fabricating, hoisting, erecting fixing in position, Making siveted bolted/welded connection and one cont of anticorrosive paint and over 2 costs of oil painting approved quality and thade etc complete

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc complete. With natural sand/V SI quality Artificial Sand

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls in plinth edernal walls including bailing out water manually, striking joints on unexposed faces, raking out joints an exposed faces and watering etc. Complete

Providing internal cement plaster 20 mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc.

Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant/ pan mixer and fine agreegates of required specifications (VSIsand finely washed etc )

Providing internal cement plaster 12mm thick in single coat. cement mortar 1:5 without neeru finish to concrete or brick surtaces, in all positions including scaffolding and curing etc.

RWH- Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0 m dia pre-cast RCC rings, 300 mm thick side filling around out side of RCC rings (annularspace) with 40mm size boulders including filling of percolation pit upto 0.5 m depth (from bottom up) with25-75 mm clean washed gravels followed by 0.5 m depth of 10-25 mm of clean washed stones followed by 0.5m of washed river fine aggregate ( natural sand/ crushed sand VSI grade finely washedetc.) including netlonmesh between each gravel/ fine aggregate (natural sand/ crushed sand VSI grade finely washedetc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes,includingallleads,liftsatalllevels.Allmaterialshouldbeofapprovedmake.Allworkscompleteasperthe drawing, technical specification and direction of the Engineer in charge

(C). INTERNAL DRAIN WORK Excavation for foundation in earth, soil of all types, sand gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering preparing the bed for the foundation and necessary back filing, ramming, watering including shoring and strutting etc complete (Lift uplo 1.5 m)

Supplying hard murum / kankar at the road site , including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete SAME AS PER ITEM NO 31

Compacting the hard murum side widths, including laying in layers on each side with a vibratory roller, including artificial watering, etc. Complete.

(E). ROYALTY METAL 40 MM & ABOVE

Murrum

(D). INTERNAL ROAD WORK Providing earthwork in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20 cm. to 30 cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-S at attachment to achieve not less than 97% of standard proctor density etc. complete ( Material obtained from Other sources)

Cement-Intial seating time,Final setting time,Specific Gravity, Soundness, Fineness moduls

Sand-Fineness Modules,Silt & Clay Content

C.B.Metal- Water Absorption, Specific Gravity

Bricks-Water Absorption,Compressive Strength & Efflorescence (Set of 5 Bricks)

Steel (upto 16 mm)- Tensile Strength, %Elongation, Yield stress, Wt.per RMT, bend, rebend, proof tests

Concrete Mix Design- (With all Tests on basic materials)

Soft murum- Liquid limit & plastic limit

(F). MATERIAL LAB TESTING Cement Concrete-Compressive Strength

Making french of suitable width and depth In hard murum /tar road for laying provided LT cable up to and including 16 sq. mm complete as per specification no. CW.EXNCIR

Making trench of suitable width and depth In soft sol for laying provided LT cable up to and including 14 sq.mm complete as per specification no, CW-EXN-CTR

Supplying & erecting mains PVC unarmoured cable 1100 Volt grade ISI mark 3 core 6

Supplying erecting weatherproof powder coated distribution board 4 way with 2 x 6/10 Amp S. P. M. C. B. with industrial two pin plug socket 10 A and 3 pin plug top 10 A with top cover necessary connection etc complete with approved make.

Providing point wiring for street light with PVC unarmoured cable 1100Volt grade ISI mark 3 core 1.5 sqmm stranded/solid copper erected on wall with G. 1. Saddle duty painted @ 0.25 m C/C rigidly grouted in the wall with the help of plated screw including 4"x 4" M. S. box 2 way with epoxy painting. 7 Supplying & erecting 10-12W, 230v Integral type LED Lamp suitable for 8-22/E-27 base.

Supplying & erecting 10.12W, 230V int

egral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF> 0.95 class IP 45 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF> 0.95 class IP 45 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS

Supplying and erecting street light Wall bracket made hom 40 mm. dia 8' class G.l. pipe 1.2 m in total length complete as per specification no. FG-BXT/WB

Providing pipe type earthing with 40mm, dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials or per specificallon no. EA-EP

Supplying, erecting & marking DPMCB LA lo 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series (for lighting) in provided distribution board as per specification no. 5W- SWR/MCB