SPL REPAIR TO BLDG NO P-91 AT TCP LINE OF 1/3 GR MD ACCN UNDER AGE B/R-II OF GE DEHRADUN

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , using old size bricks, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 (using old size bricks) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth (without using extra cement) complete all as specified and directed. (WPC will paid seperately)

M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, surface finished even and smooth with neeru finish complete all as specified and directed.

M & L for 10 mm thick rendering on celing surface in cement mortar 1:3 surface finished even and smooth including fixing of wire mesh wherever required complete all as specified and directed.

M&L for preparation of newly plastered surface of walls including corners and applying two coats of distemper oil emulsion over and including 1-1.5 mm thick layer of wall care putty finish wall surface even & smooth complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying three coats of white wash, off sets, pillar etc. complete all as specified and directed.

M&L for preparation of newly plastered surface of ceilings and applying three coats of white wash on ceiling, off sets, pillar etc. all as directed and specified.

M&L for complete removal of existing treatment on ceiling and applying three coats of white wash on ceiling, off sets, pillar etc all as directed and specified.

Writing letters or figures (Block. Roman, Italic or Indian) nexc 30 cm high Writing bldg No complete all as specified and directed.

M & L for applying two coats of Synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L for non skid ceramic coloured tiles 8-9 mm thick light shed (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

All as per item No 17 here in above but as in skirting fixed over and including 10 mm thick rendering in cement mortar 1:4, complete all as directed and specified.

M&L for non skid/mat finish ceramic coloured tiles of size 400 mm x 400 mm and 7 to 8 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300 mm x 450 mm x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile fixed over and including 10 mm thick rendering in cement mortar 1:4, and dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed and specified.

Dismantling of stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 15-18 mm thick Granite, of any type, table rubbed and polished in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frames exc 1.50 sqm but n.exc 4.00 Sqm with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 125x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

S&F factory made 100 % solid wood plastic composite (WPC) door frame 105x60 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame 75x50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing complete all as specified and directed.

S&F 30 mm thick factory made solid WPC (Wood plastic composite) gauged skeleton door shutter (single door piece to be used) with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can density shall be as per manufacturer specified and complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid both side prelaminated decorative type designer flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRMite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction.

S&F stainless steel butt hinges medium weight, 100 mm fixed to steel/wooden/WPC shutters complete all as specified and directed.

S&F stainless steel barrel tower bolts 150 mm size, with bright bolt complete all as specified and directed.

S&F 150 mm size solid in one piece stainless steel handles, fixed with stainless steel screws complete all as specified and directed.

S&F 300 mm long MS Helical door spring welded to steel frame or fixed to wooden/WPC door frame with screws including roller and roller plate etc complete all as specified and directed.

S&F floor door stopper of stainless steel double legged and tongue, 304 grade, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

S&F 250mm long stainless steel sliding door bolts 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type B-21, 100mm long (2 nos) suitable handle (1 no) complete all as specified and directed.

M&L for repair to steel window/ventilator in any size with easing and adjusting including fittings of any size without taking down and making the window smooth functional with change of unservicable box type hinges, peg stays, left and right handle fixed with nut bolt and welding work and hammering complete all as specified and directed. (Note:- All the necessary fittings such as hinges, peg stays, handle, etc are included in this item rate quoted by teh contractor.)

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass, complete all as specified and directed.

S&F 4 mm thick frosted sheet glass ordinary quality and glazing with oil putty or wooden beads in square/rectangular shape in each pane including hacking out of old glass, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F framed work such as grills, gratings, etc. or hand rails with ends of bars (angle, hollow section) shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed.

S&F steel work in tubular section for stair case, railing at balconies, roof truss etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-179 grade St-240 complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Stainless steel 304 grade wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling block board/ boarding of any description and in any position including iron mongriescomplete all as specified and directed.

S&F 18 mm thick PVC board one side prelaminated and other side plain white colour as in cup board shutters and frames, kitchen cabinet front shutter, partion, shelf, & drawer, fixed with screws, solvent cement / adhesive complete all as specified and directed.

S&F 6 mm thick PVC board both side plain white colour as in cub board shelves etc fixed with screws, salvent cement/ adhessive , complete all as per specifications & directed.

S & F in repair Continuous (Piano) hinges, mild steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and directed.

S&F in repair magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative finished at both ends complete all as speccified and directed as per approved sample complete all as specified and directed.

S&F 15mm bore medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors including taking down old tubing complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth ,complete all as specified and directed.

S&F 20mm bore medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors including taking down old tubing complete all as specified and directed.

S&F in repair vitreous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with cast iron spun 600 mm long 'P' trap (SI 3989 1984), set in cement concrete type B-1 (1:2:4) complete (excluding flushing cistern and flush pipe) complete all as specified and directed.

S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed.

S&F in repair sink mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

S&F in repair wall mixer/L bend mixer 15 mm dia, Brass Chromium plated complete all as specified and directed.

S&F in repairs CP brass bib tap 15mm bore screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs CP stop/angle cock fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 100mm dia CP brass shower rose suitable for 15mm dia pipe complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts, of 450 mm long complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs Soap dish 6 inches, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as specified and directed.

S&F in repair CP steel Grating round with steel frame with hinge 100mm dia all complete all as specified and directed.

S&F in repairs 32mm bore heavy duty waste pipe not less than 60cm long with PVC coupler for kitchen sink, WHB, urinal, etc complete all as specified and directed.

S&F in repair plate rack 300mm and size 100 x 80 cm made out of 1.00 mm thick stainless steel sheet complete all as specified and as directed.

S&F in repairs stainless steel kitchen sinks without draining board ISI marked made of stainless steel sheet 1 mm thick, with plugs, washers and wastes, including bedding lime cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like including demolition of old RCC, complete all as specified and directed.

M&L for use waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajja and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.

M&L for TMT MS bar 6-8 mm dia, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls or laid in trenches or floors incl taking down old pipe of any type complete all as specified and directed.

S&F PVC (SWR) pipes of 75 mm dia, single socketed fixed to walls or laid in trenches or floors incl taking down old pipe of any type complete all as specified and directed.

S&F in repairs PVC (SWR) bends of 110 mm dia, any radius complete all as specified and directed.

S&F in repairs PVC (SWR) bends of 75 mm dia, any radius complete all as specified and directed.

S&Fin repairs PVC (SWR) junction single Tee equal or unequal 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) junction single Tee equal or unequal 75 mm dia complete all as specified and directed.

S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

S&F in repairs for 110mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete all as specified and directed.

S&F rotational moulded polyethylene 500 Ltrs Capacity white water storage tanks of weight not less than 18 kg (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float three layer external and internal white and fly nut, screwed down for iron pipe of 15 mm dia including dismantling of old tank complete all as specified and directed.

S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed.

Removal of existing roof treatment of any description from roof surface including cleaning and washing the surface complete all as specified and directed.

M&L for preparation of roof surface and treating of joints, filling of honey combs and providing 25 mm thick PCC (1:2:4) type B-0 with WPC over roof surface complete all as specified and directed.

M&L for Water proofing roof treatment with Polymeric water proofing membranes of weight not less than 3Kg/sqm five layers with center core as 90 micron high molesuvre,high density polythene film sand witched between two layers of polymeric (Static polythene based) between laminated on both sides with 20 micron HMDPF film over a coat of hot blown bitumen with 85/25 grade @ 1.20 Kg/Sqm after priming the surface with bituminous emulsion @ 0.40 Litre/Sqm on plastered surface. Water proofing membrane should be laid with over laps 150 mm at ends and 75 mm for sides and shall be bounded uniformity by LPG torch flame over the polymeric water proofing membranes apply semi hot blown bitumen 85/25 grade @ 1.20 Kg/ sqm and applying aluminium reflective paint over it as per manufacturers instructions complete all as specified and directed.

Taking out old damaged SGSW pipes from existing lines including necessary excavation in trenches and getting out in any type of soil and supply, laying and jointing of new PVC pipe of 150mm dia including packing under and haunching against the sides of pipes in PCC (1:4:8) type D-2 and returning, filling in disposal of surplus soil to a distance n exc 50m complete all as specified and directed.

Cutting openings, through brick walls in cement mortar for door, window and other openings or enlarging existing openings, converting window into door openings etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded agg) as in sub base, levelling course etc complete all as specified and directed.

M & L for sand filling under floors or in foundations including watering and consolidation ,complete all as specified and directed.

M&L for 60 mm thick coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment, complete all as specified and directed.

M&L for prepolished rubber moulded vibromatic chequered cement concrete tile of size 300 x 300 X 22-25 mm thick as in floor, path, etc set in jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply only integral water proofing compound.

Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm. (nominal area) FRLSH, single core PVC insulated 1100 Volts, grade multistranded copper conductor unsheathed in and including concealed PVC conduit medium duty 20 mm dia or higher and heavy grade conduit fittings and heavy duty accessories with suitable size of sunk type cast iron or pressed steel terminal box 1.6mm thick for mounting of switches, sockets, fan regulator etc with suitable size hylum sheet , one green colour FRLSH cable of same size as earth wire up to common earth and connected to earth dolly compete all as specified and directed.

One light/ fan/bell point controlled by one-one way switch.

One three pin 5 Amp socket on same board with other switches.

One three pin 5 Amp socket on independent board

All as per item No 100.00 above but one 3 pin socket outlet 15 Amp point independent with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sqmm.

All as per item No 100.00 above but up to Sheet matel enclosure MCB DB with plug socket independent with cable 4 Sq mm size, with earth continuity coductor of size 4 Sqmm.

S&F switch piano flush, button type 5/6 Amp SP 250 V AC complete all as specified & directed.

S&F switch piano flush button type 15/16 Amps SP 250 V AC complete all as specified & directed.

S&F socket outlet multipurpose 3 Pin 5 Amp and 2 Pin 5 Amps 250 V AC complete all as specified & directed.

S&F socket outlet two in one three pin 5 Amp and 15 Amp 2 module 120 W flush type complete all as specified & directed.

S&F step type regulator socket type double module 5 step for ceiling fan 1200/1400 mm size 230 volts 6 Ampds 400 watts complete all as specified & directed.

S&F Bell switch piano flush button type 5 Amp complete all as specified & directed.

S&F switch paino flush button type 5 Amp SP 2 way complete 250 V AC complete all as specified & directed.

S&F Bell Multi Music type complete all as specified & directed.

S&F in replacement sheet metal enclosure SPN with 3 pin earth metal plug and socket with one SPN MCB 20 Amps, 240 volts in repairs complete all as specified and directed.

S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 220 V AC complete all as specified & directed.

S&F lamp holder insulated body with back plate suitable for angle and batten fitting including LED bulb 9 watt complete all as specified & directed.

M&L for sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 10 Sqmm (nominal area) drawing in and including 25 mm. dia or higher PVC concealed conduit heavy duty accessories and fittings PVC insulated unsheathed FRLSH cable copper conductor multistranded of size 10 Sqmm as earth wire upto common earth and connected to earth dolly including taking down old wiring complete all as specified & directed. Note: 03 runs of copper cable and 01 run of conduit shall be measured 01 RM unit length.

S&F in replacement sheet metal enclosures 240 volt with 200 Amp rated bus bar, double door 8 way DB,s IP-43 IK 09 metal door suitable for one MCB SPN as incoming and 06 MCB SP as out going complete all as specified and directed. (MCBs shall be measured and paid separately)

S&F in replacement sheet metal enclosures Triple pole and neutral (VTPN) double door 415 Volt 4 way DBs IP-43 IK- 09 Vertical type suitable for 200 Ams rated bus bar & one MCCB 100 Amp as incoming and 12 MCB SP as outgoing complete all as specified and directed. (MCCB & MCBs shall be measured and paid separately)

S&F MCB double pole 240 Volt 10 KA 40 Amp 'B' series complete all as specified & directed.

S&F MCB single pole and 240 volt 10 KA 5-32 Amp 'B' series complete all as specified and directed.

S&F MCCB 415 Volt 16 KA 4 pole 125 Amp adjustable type as incoming with fixing arrangement complete all as specified and directed.

S&F in replacement wall mounted LED tube light fitting 1x20/22 watts extruded aluminium polycarbonate covers PF 0.9 and above operating voltage 140V-270V colour temp 6500K & lumen input output 95 Lumen per watt and connected to ceiling rose with required length of two core flexible copper cable 23/0.0076 fixed on wall/roof complete all as specified and directed.

S&F in replacement mirror light 9/10 Watt LED tube light with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in replacement LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp with accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling fan 1200 mm sweep single phase 230 volts double ball bearing with down rod , canopy, blades etc ,BLDC TYPE, 5 star rated including connecting with twisted three cord flaxible copper conductor cable (23/.0076 ) from ceiling rose to connector of fan including taking down old fan and deposited to AGE E/M store yard without extra cost comlete all as specified and directed.

S&F exhaust fan, steel body AC single Phase. 230V of size 300mm, 900 RPM, single phase, 230V AC with louver and making hole for fixing arrangement on wall with frame hold fastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector complete all as directed by Engineer-in-charge.

S&F Air ventilation fan made of sturdy Engineering plastic complete with louvers shutter, 250 mm, 1200 RPM, single phase, 230V AC including necessary, M&L for making hole fixing arrangement on wall with frame holdfastner, bolt, washer etc including connection with twisted white three core flexible copper multistranded conductor cable from ceiling rose to connector of fan including taking down old fan and deposited to AGE E/M store yard without extra cost comlete all as specified and directed.

S&F in replacement of Geyser vertical mount type 25 Ltrs capacity five star rated, shockproof and rust proof metal body compact size including two nos PVC connection heavy duty and connecting with all fixing arrangement of nuts & bolts and fixing on wall including taking down old Geyser and deposited to AGE E/M store yard without extra cost comlete all as specified and directed.

S & F Sheet metal enclosure SPN with a two pin and earth plug and socket complete with one 240 Volts 20 amp single pole MCB complete all as specrified & directed.

S&F in replacement integral LED building security light luminaire comprising of pressure die cast aluminum housing heat resistant toughened glass with frame IP-65 protection road way luminaries with high power LED 45 watt with efficiency 100 lumen/watt at system level, CCT>5700K, with average life class 50,000 burning hours, complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for laying of underground cable, foundation of pole and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated soil in trenches including spreading, levelling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed.

Removing of excavated soil to a distance n. exc. 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for laying local dry clean sand filling for cushioning in trenches around under ground cable complete all as specified and directed. (Only punned thickness shall be measured and paid)

M&L for laying well burnt brick, old size in trenches, as protection of under ground cable complete all as specified and directed.

Supply, laying, jointing and testing of underground XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core laid in trenches/ducts/ along poles/through pipe, under road etc with new aluminium lugs of cable size complete all as specified and directed.

IMPERIAL ENGINEERS (BID ID -3498793)

M/s Pradeep Kumar (BID ID -3504548)

M/S C S AITHANI (BID ID -3497906)