Building Works

Name of Work :: Repairing & Renovation to Civil Court Building at Kapadwanj (Toilet Block Repairing, Parking Road, Floor Repairing,

Electrical Work , Central AC System & other miscellaneous work)

Bill of Quantities (BOQ)

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[1] Dismentaling tiled of stone floors laid in mortar including stacking 478.00 Sqm 46.77

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

[2] Dismantling santtary fittings like wash basin . W.C. pan Indian and 36.00 Each 394.51

European type, flushing tank etc. including stacking the materials

with all lead and lift.

[3] Demolition including stacking of serviceable materilas and 15.00 Cum 1030.81

disposal of unserviceable materials with all lead and lift. (i) R.C.C.

[4] Demolition of Brick work and stone masonry including stacking of 10.00 Cum 536.09

serviceable materilas and disposal of unserviceable materials with

all lead and lift.(ii) In Cement Mortar.

[5] Dismentling doors, windows, ventilators etc. (wood or steel) 5.00 Each 182.94

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and

lift.(i) Not exceeding 3 Sq.M. in area.

[6] Carry out Acrylic polymer modified elastomeric water-proofing 97.00 Sqm 1232.06

membrane coating treatment for Toilet block shaft upto depth

m as per following : Cleaning of concrete surface / plaster surface

with grinder, blower, chisel etc. and make it free from dust, dirt,

frost etc. Make an Angel Fillet at joint of floor and Periphery wall

with mixing ratio of 1 part Cement and 3 part Sand admixed with

5 Ltr. Latex based Mortar and screed modifier & bonding agent of

best quality manufacrurer per Cement bag. Apply Acrylic polymer

modified elastomeric waterproofing membrane coating on shaft

wall as well as bottom of best quality manufacrurer on pre wet

concrete surface as per manufacturer standard

specification.Second coating shall be applied after 24 hour of first

coating. Treated surfaces must be kept moist for a minimum of

hours using continuous water spray & Waterponding for slab shall

be executed . After doing all above treatment, make 12 to 15 mm

plaster on all periphery wall upto 0.6 m depth and avg. 50 mm

thick screed on floor. For plaster mixing ratio will be 1 part

cement: 2 part sand: 125 ml Integral waterproofing liquid

admixture of best quality manufacrurer per cement bag and

[7] Providing and filling with good quality cinder in 1:4:8 (1 cement : 4 15.00 Cum 4992.38

sand : 8 cinder) as and where directed by the Engineer-in-charge,

in sunks in layers of 15 to 20 cm. thickness, including watering,

ramming well etc. complete, as directed by engineer in charge.

[8] Providing laying and jointing in true line and level 15mm dia. 96.00 Rmt 72.65

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[9] Providing laying and jointing in true line and level 25mm dia. 81.00 Rmt 91.84

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

[10] Providing laying and jointing in true line and level 50mm 91.00 Rmt 195.67

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesivesolvent, including cost of all materials.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[11] Providing, laying and jointing in true line and level 110 diametre 99.00 Rmt 835.15

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[12] Providing, laying and jointing in true line and level 160 diametre 25.00 Rmt 831.22

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

[13] Providing and fixing concealed center point to wall ceiling & floor 15.00 Rmt 166.86

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete.[A] 15 mm.

[14] Providing and fixing concealed center point to wall ceiling & floor 30.00 Rmt 249.72

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. [C] 25 mm.

[15] Providing and fixing concealed center point to wall ceiling & floor 60.00 Rmt 653.77

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF)

seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. [F] 50mm.

[16] Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 25.00 Rmt 277.43

working pressure polythene pipes of the following outside Dia.

Low densidy, complete with special falnge compression type

fittings, wall clipsetc. including making good the wall ceiling and

[17] Providing and fixing screw down bib taps of following size.(B) 30.00 Each 186.83

Brass chromium plated screws down Bib Tap. (i) 15mm dia.

[18] Providing and Fixing C.P. Angle stop cock 15 mm Heavy duty with 27.00 No 508.42

cap including fixing with CP brass nipple including all labour &

material etc. complete as per instruction of Engineer In Charge.

[19] Providing & Fixing Waste Pipe for Wash basin C.P. 32 mm dia 22.00 Each 83.37

[20] Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 15.00 Each 558.36

100mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating

includingthe cost of cutting and making good the walls.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[21] Providing and fixing washbasin with single hole for pillar tap with 6.00 Each 1600.61

C.I. or M.S. brackets painted white including sutting holes and

making good the same Vitreous China 550 mm x v 400mm size.

(i) In white colour with brass union and CP brass wall discharge

pipe with flanges and cap of best quality brand , 32mm dia GI

waste pipe with fittings up to floor trap, 32mm dia CP brass waste

coupline with CP chain and rubber plug, 15mm heavily quality

flexible PVC inlet connecton of required length with brass union,

washer and CP brass cap complete in all respects including

cutting and making good the walls RCC work as directed and

making good the same etc. complete.

[22] Providing and fixing Wall Mounted wash down water closet 4.00 Each 7369.64

(European type W.C.Pan) with integral "P" and "S" trap including

jointing the trap with soil pipe in cement mortar 1:1 (1-cement, 1-

sand) of best quality brand including providing and fixing plastic

seat cover for wash down WC with CP brass hinges and rubber

buffers back plastic seat and including providing 12.50 Litres low

level flushing cisten with a "P" air of CI or MS bracket with

complete fitting such as lead valve Sipron 15mm dia brass ball

valve with polythene float CP brass handle, unions and couplings

for connection with inlet outlet and overflow pipes 40mm dia

porcelain enamelled flush bend, including jet spray operated with

necessary valve of best quality brand including cutting holes in

walls and making good the same connecting the flush bend with

cistern and closet vitreous china etc. complete.

[23] Providing and fixing S.W. gully trap with C.I. grating brick masonry 21.00 Each 1246.92

chamber and water tight C.I. cover with frame of 300mm x

300mm size (inside) with standard weight.(i) Square mouth

traps.(B) 150mm x 100mm size P or R type

[24] Providing and fixing PVC SWR Vent Cowl of following dia etc. 7.00 Each 29.78

complete as directed

[25] Providing and fixing C.P. brass towel rail comlete with C.P. brass 9.00 Each 603.19

brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x

[26] Providing and fixing Heavy Handle valve of aprroved brand & 3.00 Each 403.39

follwing internal dia of Brass including fixing in pipe lines

etc.complete (A) 15 mm Dia

[27] Providing and fixing Heavy Handle valve of aprroved brand & 21.00 Each 479.14

follwing internal dia of Brass including fixing in pipe lines

etc.complete (A) 25 mm Dia

[28] Providing and fixing Butterfly valve of aprroved brand & follwing 6.00 Each 1029.14

internal dia of Brass including fixing in pipe lines etc.complete (A)

[29] Providing and fixing Concealed cock 15 mm Ø Heavy duty with cap 21.00 No 592.30

[30] Providing and fixing 600mm x 450mm bevelled edge mirrror of 4.00 Each 833.73

superior glass mounted on 6mm thick A.C. sheet or plywood sheet

and fixing to wooden pluge with C.P. brass screws and washers.

[31] Providing and fixing Urinal or approved quality including conecting 9.00 Each 1036.27

the Urinal with waste pipe , tap etc. complete.(A) White

earthenware flat back or corner type size 430mm x 260mm

[32] Providing and fixing water closet squatting Pan (Indian type W.C. 18.00 Each 933.78

Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to

be measured and paid for separately) (A) Vitreous China.(I) Long

pattern = White colour

[33] Providing and fixing plastic seat and cover for wash down water 2.00 Each 291.33

closer with C.P. brass hinges and rubber buffers. (B) Black plastic

seal and cover.

[34] Providing and laying Both side mirror polished Green marble 16.00 Sqm 1289.58

stone slab 18 to 20 mm (Average) thick of approved quality incl.

full moulded round front edge fixed in wall for partition / Counter

and jointed with grey cement slurry including rubbing and

polishing etc. complete

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[35] Providing & Fixing Bajri or figure glass 4mm thick in existing 5.00 Sqm 202.69

ventilation louver frames as per instruction of Engineer In Charge.

[36] Providing and fixing hard drawn Steel wire fabric 25mm x 25mm 45.00 Sqm 917.12

mesh to window frames etc. including 60 x 20mm beading of teak

wood and priming coat with approved steel primer & wood

primer etc. complete as per instruction of Engineer In Charge.

[37] Scaffolding:- Providing, erecting diamantling safe H frame 19.00 Sqm 818.10

and/pipe scaffolding including working platform for external area

of buidling upto (G+2) story to facilitate all works as directed etc.

completed as per instruction of Engineer In Charge.

[38] Repairing of existing wooden or any type of doors and window 14.00 Each 1161.50

including dismantling shutters repairing the same including

providing and fixing necessary missing or damaged fixtures and

fastening cutting edges for smooth opening and closing including

cutting bottom edge to match with flooring with necessary

repairing to frames, missing glass etc. complete.

[39] Providing and fixing S.S. Handle for door/ window 10 Cm size of 3.00 Each 142.65

ASIS as per detailed drawing / as directed by EIC.

[40] Providing and fixing SS floor door stoppers with rubber cushion 7.00 Each 117.41

screws etc. to suit shutter thickeness complete as directed by EIC.

[41] Providing and fixing PVC Flushing Wall Hung White Water Cistern 3.00 Each 2667.37

with 10 Liter Capacity Side Handle Flush Tank with A pair of C.I.

or Mild steel brackets, complete with fittings such as syplionic

arrangement, pull union and couplings for connections with inlet,

outlet and overflow pipes etc. including cutting holes in walls and

making good the same as per instruction of Engineer In Charge.

[42] Carring out plinth treatment to post construction / existing 1826.00 Sqm 124.28

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration Weight one percent is recommended

i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

concrentration inclusive of one litre chemical emulsion appication

at the rate of 5 Litre chemical / Sqm of surface is recommended as

[43] Excavation for foundation upto 1.5 m depth including sorting out 6.00 Cum 261.73

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard soil

[44] Providing and laying controlled cement concrete M.150 for curing 6.00 Cum 3860.16

complete excluding cost of formwork and reinforcement for

reinforced concrete work in (A) Foundations, footings,Base of

columns and Mass concrete

[45] Brick work using common burnt clay building bricks having 4.00 Cum 4289.33

crushing strength not less than 35 kg./Sq.Cm. in Super Structure in

Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional at

[46] Providing 15mm thick cement plaster in single coat on 406.00 Sqm 194.07

Rough(Similar)side of single or half brick walls for interior

plasteringupto floor two level and finished even and smooth in (i)

Cementmortar 1:3 (1-cement:3-sand) at First Floor

[47] Providing & Laying 300 x 300 mm x Avg. 8-10 mm thick matt finish 97.00 Sqm 949.68

glazed tiles flooring in treads of steps and landings laid on a bed of

12 mm thick cement mortar 1:3 (1 Cement : 3 coarse sand)

Colour, shade and Pattern approved by engineer in charge.

[48] Providing and laying coloured glazed tiles of the size 300 mm x 356.00 Sqm 1417.36

200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of

steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) & jointed with white cement slurry.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[49] Providing and laying polished Kota stone slab flooring over 20mm 358.00 Sqm 989.45

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A)

[50] P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm 26.00 Sqm 1248.74

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand)

on new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

[51] Providing unskilled labour for misc. work as per instruction of 12.00 Day 497.93

Engineer In Charge.

[52] Removing dry or oil bound distemper by a washing and scraping 511.00 Sqm 10.99

and sand papering the wall surface smooth including necessary

repairs to scratches complete.

[53] Applying two coats of putty & two coats of primer of approved 511.00 Sqm 40.59

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

[54] Applying two coats of two-component coating composed of epoxy 511.00 Sqm 315.81

resin, curing agent, inert pigments & properly selected fine fillers,

additives in water as a medium of approved brand and

manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar

droppings and other foreign matter and sand papered smooth as

per instruction of Engineer In Charge.

[55] Wall painting (two coats) with plastic emulsion paint of approved 511.00 Sqm 78.90

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

[56] Finishing wall with weather proof exterior emulsion paint on wall 180.00 Sqm 114.53

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

[57] Providing and fixing M.S.grills , Flat , Shutter , Sheet of required 173.00 Kg 107.36

pattern and design fixing with Wall / Ground etc. with M.S.flats at

required spacings and frame alround, square or roundbars

shutter , frame , with round headed bolts and nuts or by screws

including one coat of primer and two coats of matt finished oil

painting etc. complete as per instruction of Engineer In Charge

[58] Providing wood work in frames of Doors,windows cleare story 5.00 10 608.06

windows and other similar works wrought,framed and fixed Cu.Dm.

inposition. (A) Indian Teak Wood

[59] Painting two coats (including priming coat)on new wood and 3.00 Sqm 145.41

wood based surface with ready mixed paint, brushing, oil, gloss,

semi gloss to give and even shade including cleaning of all

dust,dirt and other foreign matter sand papering and stopping.

[60] Painting two coats (excluding priming coat) on new steel and 6.00 Sqm 87.81

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

[61] Steel work, welded in built up sections framed work including 24.00 q 9047.86

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[62] Providing corrugated PPGL Sheets roofing fixed with Galvanized 298.00 Sqm 822.48

iron 'J' or 'L' hooks bolts and nuts 8 m. diameter with bitumen and

G.I.Limpet washers filled with white lead complete including

ridges, gutters etc. excluding the cost of purlins, rafters and

trusses. (1) 0.60 mm. Thick sheet

[63] Box cutting the road surface to proper slope and camber for 120.00 Cum 104.20

making a base of road work including removing the excavated

stuff and depositing on the road side slope as directed upto50

[64] Supplying and stacking of graded stone aggregate of following 45.00 Cum 959.02

size (for W. B. M. ) including spreading (1 ) Machine crushed stone

aggregate 45 mm to 63 mm size

[65] Supplying and stacking of Soft murrum / Binding materials 12.00 Cum 439.92

including spreading

[66] Rolling and consolidating water bound maccadam including 298.00 Sqm 21.00

watering not exceeding 150 mm thickness (Main layer including

filing in depressions which occur during the process.(B) with

power roller exceeding 8 tone not exceeding 12 tone

[67] Providing and laying cement concrete 1:4:8 ( 1 cement: 4 coarse 45.00 Cum 2847.16

sand: 8 crushed stone aggregate 40 mm nominal size ) and curing

complete excluding cost of form work & including all in

foundation and plinth.

[68] Providing and fixing window having extruded aluminum Colour 2.00 Sqm 1713.70

anodized section frame main outer size 63.50 x 38.10 x

mm,@ Wt 1.094 Kg / Rmt, horizontal two track member size

mm x 31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member

of size 61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x

1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with

mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc complete for

[69] Providing and laying mirror polished granite stone slab 18 5.00 Sqm 1921.99

(Average) thick of approved quality incl. full moulded round front

edge fixed in Counter top and jointed with grey cement slurry

including rubbing and polishing etc. complete

[70] Providing & laying Three Coat of High performance elastomeric 740.00 Sqm 453.79

cementitious waterproof coating on terrace including all labour &

material etc complete as per instruction of Engineer In Charge.

[71] Providing and fixing pre-cast concrete kerb stone of gray cement 20.00 Rmt 361.64

based concrete block 30cm length,30cm height and 15cm thick of

M200 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1 cement:3fine sand) etc complete.

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[72] Providing and fixing eco-friendly light weight calcium silicate false 1740.00 Sqm 1648.96

ceiling tiles having Tegular edge & 15 mm Thick Densified edges

on the Tile Periphery for Extra Strength The Light weight calcium

silicate ceiling tiles shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100% humidity resistance and

also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/ Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent

of size 595 X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel sections

(galvanizing @120 grams per sqm including both side) consisting

of main ‘T’ runner suitably spaced at joints to get required length

and size of 24X38 mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced 1200 mm along

spaced between main ‘T’ at 600mm centre to centre to form agrid

of 1200X600mm and secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm hick (Minimum) sheet to be

interlocked at middle of the 1200X600 mm panel to form grid of

size 600X600mm resting on periphery walls/ partitions on a

perimeter wall angle pre-coated steel of size (24X24X3000mm

made of 0.40mm thick (minimum) sheet with the help of rawl

plugs at 450mm centre to centre with 25mm long dry wall screws

@ 230mm interval and laying 15mm thick Densified edges light

weight calcium silicate ceiling tiles of approved texture (Fine

Fissured/Cosmos/Spintone) in the grid including, cutting /making

opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long

dash fasteners, 4mm G.I. adjustable rods with galvanized steel

level clips of size 85X30X0.8mm, spaced at 1200mm centre to

centre long main ‘T’ bottom exposed with 24mm of all T-sections

shall be pre- Painted with polyester baked paint, for all heights, as

per specifications, drawings and as directed by engineer-in-

charge.Note:- Only calcium silicate false ceiling area will be

measured from wall to wall. No deduction shall be made for

exposed frames/opening (cut outs) having area less than

sqm. The calcium silicate ceiling tiles shall have NRC. Value of

(Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for

Globe, light reflection 85% non-combustible as per B.S. 476 part

IV, 100% humidity resistance and also having thermal

conductivity. 0.043° w/m KC.for the best thermal Insulation

[73] Providing and Arranging side unit with top 40mm overall thickness 1.00 No 16707.47

made from 18 mm thick MR grade plywood with 4.00 mm thick

veneer on top with melamine finished polish. Side and drawer

made of 18mm thick MR grade plywood with 4.00 mm thick

veneer with melamine finished polish and inside 0.8mm thick

balancing laminate of approved shade. Teakwood border with

melamine finished polish of specified size to be provided all

around the borders of plywood. Drawer run on Ebco make

telescopic channel with Godrej make lock with Two keys and

shutter fixed with auto hinges incld. all necessary fixtures and

fastening as approved and back of the unit with 6mm thick MR

grade playwood with 0.8 mm thick laminate of approved shade

with nylon bullet including all materials and labour etc. Complete

as per drawing and instruction of Engineer-in charge . Side table -

Veneer - 900mm x 450mm x750 mm

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[74] Providing and Arranging benches (bakada) made from 50mm x 4.00 No 19787.78

25mm indian Teakwood patti with smooth edge moulding 5 Nos

each on seat and back as per design. under structure made from

CRC M.S. 50mm x 50mm x 1.6 mm pipe 16 Guage and 50mm x

12mm flat for base support with 50 micron powder coating

frame.All wooden member to be melamine polish.Including all

materials and labour etc.Complete as per drawing and instruction

of engineer-in charge.over all size : 2250 mm L ,Seat : 450mm

wooden bench W,back : 400mm

[75] Providing and Arranging Cushion chair made from Indian 49.00 No 5555.89

teakwwod having Back leg size :75 mm x 37mm ,front leg 37mm x

37mm size, back support round (curvica) shape 150 mm x 37 mm

size 2 nos, Back side sheet frame of size 100mm x 37mm and front

side support size of 50 mm x 37 mm. Seat made from 12mm thick

MR grade plywood and covered with 50 mm thick 40 density PU

foam with 12mm supersoft HD covered for softness with high

quality fabric of approved shade. Total height 900mm and back

height 450mm, Seat size 400mm x 450mm including all materials

and labours etc. Complete as per drawing and instruction of

engineer-in charge. Cushion Chair

[76] Providing and Arranging fix chair having structure of CRCA M.S. 64.00 No 7272.00

pipe 20mm dia and 16 guage with 50 micron powder coated of

approved seat and back 40 density PU foam covered with fabric of

approved shade and texture with one year replacement warranty.

Wooden armrest to be provided as per approved design.

Complete chair should be in suitable shape including all materials

and labours etc. complete as per drawing and instruction of

engineer-in charge.

[77] Providing and Arranging Full Height with top 37mm overall 2.00 No 22819.38

thickness made from 18 mm thick MR grade plywood with

mm thick Laminate finished polish. Side and drawer made of

18mm thick MR grade plywood with 1.00 mm thick Laminate

finish and inside 0.8mm thick balancing laminate of approved

shade.Godrej make lock with Two keys and shutter fixed with

auto hinges including . all necessary fixtures and fastening as

approved and back of the unit with 6mm thick MR grade

playwood with 0.8 mm thick laminate of approved shade with

nylon bullet including all materials and labour etc. Complete as

per drawing and instruction of Engineer-in charge . Full Height

laminate Storage Size 900mm x 450mm x 2100mm

[78] Providind and Arranging Medium Back Chair - Seat & back 11.00 No 17927.50

cushioned on ply, aluminum die casted arms with cushioned pad,

Synchro mechanism with single back lock , gas lift , chrome

base.Including all materials and labour etc.complete as per detail

drawing and instruction of engineer-in charge.Size : max.Height

1070mm, Min.970mm,Seat: 490mm x 510 mm,Back : 640 mm x

510 mm MARCO 1002 Meduim back Chairs

[79] Providing and Arranging Two side argument small desk made of 3.00 No 5595.50

18mm thick MR grade plywood having Desk Size : 600mm x

450mm & front height 450mm back height 400mm ( i.e. slanting

position) with wooden teakwood patti for frame & to hold paper

and pen. Top and side 18 mm thick finish with 4mm thick veneer

both side.all veneer & T.W.surface to be melamine polish.

Argument Desk Size :- 600mm x 450mm x 300 /

[80] Providing and Supplying colour coated Iron Treasury of size not 28.00 No 19695.00

less than 1020 x 510 x 1930 mm with double opening

shutter,mortice lock,handle of best and approved quality etc.

complete or as directed by engineer in charge

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[81] Providing and Arranging three seater gang seater having seat and 22.00 No 15680.25

back made from CRCA capcular Tubular frame welded with

perforated Die moulded CRCA sheet. base frame made from

round Tubular welded with horizontal beam Two side armrest

welded with frame including finishing metal parts with epoxy

polyster powde coating of 50 micron thickness Including all

materials and labour etc.Complete as per drawing and instruction

of engineer-in charge 3 Seater S.S. Gang Seater

[82] Providing and supply slotted angel open rack made of 40 x 40 x 32.00 No 9047.14

2mm thick slotted angle having six shelves making five

compartment of 22 Gauge MS sheet with Finish epoxy powder

coated to the thickness of 50 microns. Including all materials and

labour etc.complete as per detail drawing and instruction of

engineer-in charge.

[83] Providing and fixing table of size 1980 x 870 x 770 mm as per 44.00 No 13079.50

details given by EIC. The table shall be made from avg. 18 mm

thick particle board top side with approved texture laminate on it

and with post formed top and design round edge as per details

given by EIC. The under structure shall be made from 4 Nos. 57 x

57 mm vertical wooden support post and 32 x 45 mm wooden

horizontal support base with one longer base & 2 shorter base.

Top structure shall be supported on 32 x 70 mm periphery

wooden support base with two 32 x 45 mm shorter edge wooden

support including all necessary screw,abrotap,nail,hinge stopper,

fevicol etc. complete as per instruction by Engineer in charge.

[84] Providing and Fixing Impulse Blackout Roller Blinds with fabric of 12.00 Sqm 1951.32

0.53mm thickness and Top channel of non-rusting aluminium

alloy with 1.25mm thickness and bottom channel of 1.50mm

thickness & 21mm diameter. Tilt channel of ABS plastic with

1.50mm polyster cord with 4.50mm balls with stop lock

arrangement including all necessary fixture, fastners, fittings,

labour material machinary etc complete as seletced and diretced

by Engineer Incharge.

[85] Providing and Arranging three seater Wooden Sofa made from 2.00 No 40652.50

Indian Teak with Melamine Polish. Seat made from 100mm thick

40 density foam with 25mm supersoft HD Covered for softness.

Seat to be kept on high Density nylon elastic belt inside framing

size 50mm x 37mm support armrest, legs and outer Frame having

size 80mm x 37mm with inner brace between armrest and seat

frame having Size 25mm x 50mm as showning the Photographs.

Back 80mm thick 40 density foam with 12mm thick supersoft HD

covered for softness. Seat and back covered with high Quality

Fabric approved shade and wooden armrest Including all

materails. Hardware and labours etc. Completes as per

drawing/Photographs & details and as Directed by Engineer - in -

charge Coza 3 Seater Sofa Size:- 1950mm X 750mm x 900mm ( H )

[86] Providing And Arranging table top 37 mm thick made from 18 mm 9.00 No 19481.10

thick MR grade plywood with 1.00 mm thick laminate finish.Leg &

frame to made from 50 x 50 mm x 1.6mm & 50mm x 25mm x

1.8mm size CRC pipe powder coated 50 micron finish with levlar

Appron 18 mm thick MR grade plywood with 1.00 mm thick

laminate finish with T.W. border of specified size with melamine

polish. The balance laminate 0.8mm thick to be provided on inner

faces including all materials and labour etc. complete as per

drawing and instruction of engineer-in charge. Working Table:

size : 1500 mm x 900 mm x 750 mm

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[87] Providing 50 mm thick 40 density PU foam with 12mm supersoft 115.00 No 555.50

HD covered for softness with high quality fabric of approved

shade for Seat size 400mm x 450mm including Madarpat fabric

cotton for cover with all materials and labours etc. Complete as

per drawing and instruction of engineer-in charge.

[88] Providing and Arranging Conference table Top and Leg 40 mm 2.00 No 53669.43

thick made from 18 mm thick MR grade plywood and 4mm thick

veneer with melamine polish finish. Appron to be made from

18mm thick MR grade finish with 4mm thick veneer with

melamine polish finish. Provision for the sound system and cable

manager shall be made as per the requirement Including all

materials and labour etc.complete as per detail drawing and

instruction of engineer-in charge. Conference Table Suitable for

[89] Providing High quality 10mm tempered rectangle clear glass 13.00 Sqm 2545.20

(colour less /plain glass) for table top with flat polished edges and

flat polish corner etc. complete as directed by Engineer In Charge

[90] Providing & Arranging fabricated trolly of size 36” x 18” x 34” ht. 1.00 No 14762.67

with goods carriage capacity of 250kg. made up from 40 mmx

mm 16 guage M.S. pipe with 16G sheet having 1" 16 uage CRC

ROUND PIPE and whole unit is covered with MS round bar mesh

including epoxy polymer powder coating 50 micron thick with

mm nylon castor at bottom for smooth movement including all

fixtures , fasteners , labour , material etc comp. as seletced and

diretced by Engineer Incharge.

[91] Providing & Arranging Pre-assembled Powder Coated 4 Drawer 3.00 No 24972.25

Grey color Metal File Storage Cabinet with Central Locking System

with Heavy Premium Quality Ball Bearing Slides Hardware

Accessories for Smooth Drawer movement,Self-Balancing

Mechanism, of Size 68 D x 45 W x 137 H Centimeters ,Floor Mount

of best Quality brand including all fixtures , fasteners , labour

material etc comp. as seletced and diretced by Engineer Incharge.

[92] Providing and Arranging Two seater Wooden Sofa made from 2.00 No 36331.72

Indian Teak with Melamine Polish. Seat made from 100mm thick

40 density foam with 25mm supersoft HD Covered for softness.

Seat to be kept on high Density nylon elastic belt inside framing

size 50mm x 37mm support armrest, legs and outer Frame having

size 80mm x 37mm with inner brace between armrest and seat

frame having Size 25mm x 50mm as showning the Photographs.

Back 80mm thick 40 density foam with 12mm thick supersoft HD

covered for softness. Seat and back covered with high Quality

Fabric approved shade and wooden armrest Including all

materails. Hardware and labours etc. Completes as per

drawing/Photographs & details and as Directed by Engineer - in -

charge HOF MAKE : Coza 2 Seater Sofa Size :- 1350mm X 750mm x

Rate (Exclusive

Item Description of Item (with brief specification and reference GST)

Quantity Unit Amount

No. to book of specifications)

[93] Providing ,Arranging and Fixing Decorative Wooden chair for 65.00 No 8607.67

advocates having Indian Teakwood in framing seat and back rest

with smooth & curved edges in armrest 450 mm long and of size

75mm x 35 mm with back rest having horizontal member at top

having size 75 mm x 35 mm and outer side verticle member

having 75 mm x 35 mm & inner member 5 Nos having size 25mm

x 35 mm, seating outer frame having size 75 mm x 35 mm and

inner member 5 Nos having Size 25mm X35mm with CRC tube

setcion of size 60mm diameter 3.6 mm thickness main base frame

and 20mm diameter 2.6 mm thickness vertical & horizontal frame

structure & 32mm dia 3 mm thick pipe for handle support with

50mm X 12mm thick main floor base MS plate with welding &

anchor fastener bolts fitted with seat, back and support. All

exposed wooden members shall be melamine polished including

sand papering and making edges smooth and metal members

shall be finished with epoxy polyester powder coated of 50 micron

thickness with necessary other fixtures and fastenings

etc.complete as per drawings / photograph and instruction by

Engineer in Charge. Advocate Chair

One Crore Two Lakh Sixty Thousand Seven Hundred Ten Rupees and Ninty One Paisa Only

I/We am/are willing to carry out the work at…………………………………………….% above/below percent (Should be written in figures and words)

of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct…………………………% below Add…………………………% Above

In Worlds In Worlds

(* Please strike out whichever is not applicable).

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which

no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement

Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per actual mix design

the cost of difference of cement consumption have been deducted from the rate of original item at the rate of input rate

mentioned in all the tender.

5. Credit of dismantled materials of amount of Rs. 10468.00/- must be recovered from contractor's 1st R.A. bill.

6. All duties, taxes, and other levies except GST payable by the contractor under the contract, or for any other cause shall be

included in the rates, prices and total Bid Price submitted by the Bidder. (GST will be paid extra)

Dated Signature of Dy. Executive Engineer Executive Engineer

the Contractor. R & B Sub Division R & B Division

Kapadwanj Kheda