Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.3 LAccepted-AOC | L1 | Accepted-AOC being L1 | |
| 2 | L2₹23.5 L+₹98,374.96 (4.38%)Rejected-Finance H NO 4 ANAND VIHAR KANSAPUR ROAD YAMUNA NAGAR HARYANA | YAMUNANAGAR | HARYANA | 133103 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹24.1 L+₹1.7 L (7.39%)Rejected-Finance HM 324 PHASE IX SAS NAGAR MOHALI PB | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹24.4 L+₹2.0 L (8.71%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹25.3 L+₹2.8 L (12.5%)Rejected-Finance | L5 | Rejected-Finance Being L5 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
5 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
REPAIR/REPLACEMENT OF KITCHEN IN TYPE-V QTR AT SECTOR 28 CHANDIGARH
2024_MES_636053_1
GE (I) R AND D/CHD-92/2023-24
Open Tender
Civil Works
Item Rate
90 days
Chandigarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹50,000
Yes
18 Mar 2024
6 Jan 2024
7 Feb 2024
6 Jan 2024
5 Feb 2024
22 Jan 2024
Amount
Material and labour for 18mm thick one side pre-laminated high density high moisture resistances (HDHMR) board any colour and one side nyra aryclmnt finish and other side pre-laminated white finish corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE & 1.25 mm thick nyra arylclmnt will be paid separately under item no 03.00 herein of Sch 'A')
Material and labour for 18mm thick both side pre-laminated high density high moisture resistances (HDHMR) board any colour wood grains, with white base paint finish UV HDHMR corner side rounding with edge bending tape, PVC boxes, drawer any shape and sizes will be made up by machines matching with final finish (UV) complete all as specified and directed. (Note :- Design and colour shall be approved by GE)
Material and labour for 1.25mm thik any colour Nyra Arylclmnt as in joinery, wall for other locations as per site requirement . ( colour/ shade shall be approved by GE) complete all as specified and directed.
Supply and fixing for stainless Steel Handle 100mm complete all as specified and directed
Supply and fixing for Leg PVC 100mm complete all as specified and directed
Supply and fixing for stainless Steel Mini fix latches based wood/PVC/Stainless Steel complete all as specified and directed
Supply and fixing for PVC Skirting any shape and size complete all as specified and directed
Supply and fixing for stainless Steel Inotech,pot & pan complete all as specified and directed
Supply and fixing for Wiker basket 600mm Eoan/stainless Steel base complete all as specified and directed
Supply and fixing for stainless Steel Bin holder complete all as specified and directed
Supply and fixing for stainless steel detergent holder complete all as specified and directed
Supply and fixing for PVC catllery 900 mm complete all as specified and directed
Supply and fixing for stainless steel dish Rack 900 mm complete all as specified and directed
Supply and fixing for stainless steel bottle Pullout 300mm complete all as specified and directed
Supply and fixing for stainless steel masule pullout 300mm complete all as specified and directed
Supply and fixing for stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full thread steel screws including making necessary recess in board and finished etc. complete all as specified and directed.
Supply and fixing for Swing corner stainless steel wood base complete all as specified and directed
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.
Supply and fixing for 15mm bore steel water tubing galvanised 15mm bore, medium grade including fitting fixed to walls and ceiling or in floor complete all as specified and directed.
All as per serial item no 19.00 above but fixing only Serviceable GI tubing retrieved from item no 18.00 heir before -dito-
Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed.
Supply and fixing for 20mm bore steel water tubing galvanised , medium grade including fitting fixed to walls and ceiling or in floor complete all as specified and directed.
All as per serial item no 21.00 above but fixing only Serviceable GI tubing retrieved from item no 18.00 heir before -ditto-
Dismantling floor/hearth or wall tile including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and directed.
Material and labour for non-skid colour ceramic tiles (joint free) 7 to 8 mm thick (square/rectangular) area of each tile execeeding 0.11 Sqm but n.exe 0.18 sqm , as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the exsisting area over and including 15mm thick screed bed or bedding of cement morter (1:6) complete all as specified and directed.
Material and labour for glazed ceramic digital tiles 300x450x7mm thick coloured/printed as in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or colour cement to match as in dado over and including 10mm thick cement screeding (rendering) in CM (1:4) complete all as specified and directed.
Supply and fixing 20mm thick machine cut granite (of any type) fixed on kitchen platform etc over & including 10mm thick screed bed in CM (1:4) and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including cutting and polished complete all as specified and directed.
Material and labour for rounding to edges of granite stone slab for kithen platform etc. one edge complete all as specified and directed.
Taking down cement plaster of any description including racking out joints, scrabing for key, scrubbing down with water tec complete all as specified and directed.
Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete surfaces of walls finished fair and even (without using extra cement ) complete all as specified and directed.
Material and labour for rendering 10mm thick on fair faces of brick work surfaces in internal wall with CM (1:6) complete all as specified and directed.
Material and labour for preparation of plastered or unplastered old decorated surface of wall including pilaster and cornices etc and applying two coats of plastic emulsion paint on over a layer of Birla Care Putty on wall wall complete all as specified directed.
Demolition of reinforced cement conrete in RCC Slabs, BEAMS , Roofs and walls, basement walls and in founding complete all as specified and directed.
Material and labour for RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Shelves , columns and RCC Slabs of kitchen plateform , chajja, beams, cantilever, bressummers, lintel or gully trap etc complete all as specified and directed.
Material and labour for of formwork to chullah hoods , chajja , slab and similar items including edges / sides and soffits of lintels etc fair finished surface of concrete flat complete all as specified and directed.
Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns,plinth band, lintels etc hooking ends and binding with a including mild stell wire (annealed) not less than 0.90mm dia or securing with clips quality conforming complete all as specified and directed.
Supply and fixing for brass CP sink mixer flexible for mixing hot and cold water screwed down for iron pipe 15mm complete all as specified and directed.
Supply and fixing in repairs of stainless steel double bowl sink 1143X510mmX203mm wide made out of 1.00mm thick sheet and with plugs, washers and wastes, including bedding in cement mortar to dwarf wall and connecting to union pipe complete all as specified and directed
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed
Material and labour for point wiring concealed type with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire in existing PVC conduit and fixing only GI steel boxes suitable for moudular type fittings, cover frame and brass screws with cup washers for fixing of modular switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for the following, complete all as specified and directed. Note :- Switches, sockets GI steel box and modular cover frame with plate shall be measured and paid for separately under Sch A items.
Material and labour for point wiring concealed type with PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC conduit medium grade ISI marked with its acessories and fixing only GI steel boxes suitable for moudular type fittings, cover frame and brass screws with cup washers for fixing of modular switches / socket / regulators etc including all necessary wall cutting chases and making good disturbed surfaces in cement mortar 1:3 for one light /fan point controlled by one switch., complete all as specified and directed. Note :- Switches, sockets GI steel box and modular cover frame with plate shall be measured and paid for separately under Sch A items.
All as per serial item no 39.00 above but one socket outlet 3 pin, 5 Amp, point on the same board with other switches -ditto-
All as per serial item no 39.00 above but one 3 Pin 6 Amp socket outlet point on the independent board -dito-
Material and labour for point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), with multi-stranded copper conductor 2.5 Sq. mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC concealed conduit and conduit accessories concealed in wall/roof/floor etc, ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories), including PVC insulated multi-stranded copper conductor 2.5 Sq mm nominal cross sectional area single core cable as earth continuity conductor to common earth and connecting to earth dully complete all as specified and directed at site for the one 3/5 pin 15/16 amps socket outlet independent complete all as specified and directed.
Supply and fixing in replacement modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed
Supply and fixing in replacement modular Switch 16A 1 way complete all as specified and directed
Supply and fixing in replacement modular Switch 6A 1 way complete all as specified and directed
Supply and fixing in replacement modular Socket 6A- 2/3 pin combined 2 module complete all as specified and directed
Supply and fixing for modular white cover plate with frame 3 moudule in Pearl white/approved shade for housing modular swich /sockets complete all as specified and directed
Supply and fixing for modular white cover plate with frame 4 moudule in Pearl white/approved shade for housing modular swich /sockets complete all as specified and directed
Supply and fixing for modular white cover plate with frame 6 moudule in Pearl white/approved shade for housing modular swich /sockets complete all as specified and directed
Supply and fixing for modular white cover plate with frame 8 moudule in Pearl white/approved shade for housing modular swich /sockets complete all as specified and directed
Supply and fixing for modular flush GI box suitable for modular switch sockets complete for 3 module complete all as specified and directed
Supply and fixing for modular flush GI box suitable for modular switch sockets complete for 4 module complete all as specified and directed.
Supply and fixing for modular flush GI box suitable for modular switch sockets complete for 6 module complete all as specified and directed.
Supply and fixing for modular flush GI box suitable for modular switch sockets complete for 8 module complete all as specified and directed.
Supply and fixing for ceiling rose surface bakelite 65 x 50 mm two to three terminal complete all as specified and directed.
Supply and fixing in repair decorative ultra slim LED light fitting four feet long energy efficient complete with LED lamp 18/20 watt ,230 volts, box type alumunium housing and connecting up with twin twisted flexible copper conductor cable with suitable size complete all as specified and directed
Supply and fixing in repair decorative ultra slim LED emergency inverter light fitting four feet long energy efficient complete with LED lamp 18/20 watt ,230 volts, box type alumunium housing and connecting up with twin twisted flexible copper conductor cable with suitable size complete all as specified and directed
Supply and fixing for amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 5 to 32 AMP single pole current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed
Supply and fixing for amp rating 240V, 10KA 'C' curve isolator SPN 100 AMP single pole current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed
RAJESH KUMAR
M/S MATLOOB AHMED
Bharat Enterprises
M/s Krishan Aggarwal
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .