Consultancy services for survey, investigation, preparation of designs, drawings, estimates for comprehensive development of Khanapur constituency for construction of Samudaya Bhavan, Raith Bhavan and other building works in Chikkattiholi village and construction of new Inspection Bungalow (IB) near Kanakumbi in Khanapur Taluka, Belagavi District

Technical Requirements The bidder should have the following survey equipment / Licensed software for carrying out the assignment. (1) The Differential Global Positioning System (DGPS) (Static and RTK) having angular Least count of 1 Inch and accuracy of 5 Inch both for Hz and Vz distance measurement accuracy of 1mm 1.5mm, with all the necessary accessories (2)The Electronic Total Station having angular least count of 1 seconds and accuracy of 5 seconds both for Hz and Vz distance measurement accuracy of 1mm 1.5mm, with all the necessary accessories. (3) Auto cad LT 2009 or above Auto cad 2009 or above, Auto Plotter 8 with Can SE module. (4) All necessary vehicles for carrying out the survey work. (5) Water GEM software for design of plumbing work and Gravity distribution system. (6) STAAD Pro Software of latest version. The intending bidder should have availability of above equipment/software either owned or by procurement against self-mobilization or by lease agreement entered into before the date of filling the tender.

The intending bidder should have satisfactorily completed (not less than 90% of contract value) as a prime contractor, at least one similar work costing not less than 50% of the amount put to tender i.e., 20.99 Lakhs during last 5 financial years (i.e., work executed during (i.e. during 2019-20 to 2023-24 shall be considered,) will be considered). The work done certificate should be issued by an officer not below the rank of Executive Engineer of the concerned Division / Equivalent officer and counter signed by the Superintending Engineer of the same circle / next higher officer. The cost will be updated to the present value by giving a weight age of 10% per annum, if the work is completed prior to the year 2024-25. Note:-One similar work means Preparation Detailed Engineering and preparation of construction drawings for infrastructure development covering Civil, Architectural, Sculpture, Electrical and Landscaping Works including Master Plan and approved by KNNL

The Consultancy firm should have completed at least 1 DPRs of Detailed Engineering and preparation of construction drawings for infrastructure development covering Civil, Architectural, Sculpture, Electrical and Landscaping Works including Master Plan and approved by KNNL.

The intending bidder should have completed work related to Conducting block level survey, soil investigation, preparation of preliminary designs, drawings and estimate for construction of Staff quarters & Office buildings etc. The design shall confirm to guidelines of KNNL, relevant IS codes and latest circular of Govt. of Karnataka etc.

Key Personnel (1)Position Team Leader Requirement A Post Graduate in Structural/Civil with minimum of 10 years experience in the relevant field a) 10 Years-7, b) 15Years-8 & c) Above 15 Years-10, (2) Position Senior Civil Engineer Requirement A Post-Graduate in Civil Engineering with minimum of 10 years experience in the relevant field. a) 10 Years-5, b) 15 Years-6 & c) Above 15 Years-8 (3) Position Senior Structural Engineer Requirement A Post-Graduate in Structural Engineering with minimum of 10 years experience in the relevant field a) 10 Years-7, b) 15Years-8 & c) Above 15 Years-10

Supporting Staff (1) Position Structural Engineer Requirement A Post-Graduate/ Graduate in Civil Engineering with minimum of 3 years experience in the field of conducting non-destructive test on the existing structures. a) 3 Years -01, b) 5 Years-02 & c) Above 5 Years-04, (2)Position Electrical engineer Requirement A Graduate in Electrical/Civil with minimum of 3 years experience in the relevant field a) 3 Years-01, b) 5 Years-02 & c) Above 5 Years-03, (3)Position Senior Surveyor Requirement A Graduate/Diploma in Civil Engineering with minimum of 3 years experience in operation of Total Station and GPS equipment. a) 3 Years-01, b) 5 Years-02 & c) Above 5 Years-03 & (4) Position CAD Draughtsman Requirement A Diploma in civil engineering with minimum 5 years experience in the relevant field. a) 3 Years-01, b) 5 Years-02 & c) Above 5 Years-03

The consent letters of key personnel / man power to be part of the above assignment should be enclosed. Non enclosing of consent letters will automatically result in non-applying the Marks. It may be noted that, only the team members who are indicated in this column will be necessarily employed in the above work. Any non-compliance noticed will result in forfeit of the EMD and also blacklisting of the contract firm. In exceptional cases the change in name will be permitted with the prior consent of the concerned C.E. The equivalent shall be of the same grade and experience as per replacement.

Description of Methodology The approach and methodology shall clearly define the Consultants approach to complete the assignment within the time frame A) Fair-5, B) Good-8 & C) Best-10

Liquid Assets and or availability of credit facilities of not less than Rs. 12.59 lakhs (Credit lines/ letters of credit / certificate from banks) for meeting the fund requirements etc., (usually 30% of the amount put to tender) the contractor should upload necessary documents issued by the banks

The intending bidder should have achieved in at least two financial years an average annual financial turnover of Rs. 41.97 Lakhs during the last 5 financial years reckoned back from 2023-24 (i.e., during 2019-20,2020-21,2021-22, 2022-23 and 2023-24 will be considered). duly updating the financial turnover at 10 percent per annum. Audited Profit and Loss account certified by a practicing Chartered Accountant along with copy of Income Tax returns filed for the years indicated above should be furnished. All document/certificates issued by a Charted Accountant should have a UDIN (Unique Document Identification Number) generated through the ICAI (The Institute of chartered Accountants of India) Portal. Certificate without UDIN the documents uploaded will be considered and treated as invalid document.

Deleted

Deleted

Deleted

Deleted

Deleted

Deleted

Deleted

Deleted

Deleted

Deleted