Specification No.30/2024-25

Amount

Dismantling and clearing away ( corporation limit ) from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Floor Finish

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20mm(machine crushed) metal for raft concrete without formwork including cost of all materials, lead, lift, etc., complete. (As instructed by the Engineer at site)

Brickwork in CM 1:5 mix using II class chamber bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete.

Super Structure

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, lift, etc., complete.

Interior painting with two coats with approved emulsion paint first quality on application of one coat of primer including cost of all materials,lead,lift etc complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) ( SD16 )

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point ( SD36 )

Supply and fixing of 18W 4 feet LED fitting complete with TW round blocks on wall or ceiling with LED and PVC unsheathed copper leads from terminals to the fitting.

Fabrication, supply and fixing of MS steel door and window grills using required angles, flats and square bars including cost of all necessary fittings,painting with two coats of enamel paint, cost of all materials, labour, lead, lift etc., complete as instructed by the Engineer.

Providing flooring with ellis pattern finishing of 20mm thick with cement concrete 3 to 10mm chips & pointed with same mortor including cost of all materials, curing, etc., complete.