Providing Electrical work for Proposed Mini DC 9 Installation under BSNL 4 G Phase IX.2 Project at First Floor at TE Patel Nagar Dehradun

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required.

2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire

2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire

4 x 2.5 sq. mm + 2 x 2.5 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS PVC insulatedcopper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

4 x 1.5 sq. mm

6 x 1.5 sq. mm

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

S/F of two module Stepped type electronic fan regulator on the existing modular plate switch box I/c connections but excluding modular plate etc. as required.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Triple pole

Triple pole and neutral

S/F of 100 A 4 pole MCCB of 10 KA breaking capacity with Is=100% Icu at 415 V i/c fixing the same in Vertical DB as incomer i/c connection etc as reqd Havells IHLGS40100

S/F of following size energy efficient Ceiling fan suitable for operation on 230 Volts ,single phase 50 Hz AC supply complete etc as reqd without regulator)Make -( Bajaj/Polar /USHA /crompton /havells /orient )

Shifting & ITC of wall fan /ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.( OLD FANS)

S/F of D/S type fan hook made of MS rod i/c fixing the same on ceiling with suitable 2 no Anchor fastner etc as required

Providing and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note:- More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.)

SITC of 1x18/20 Watt LED Batten luminare with polycarbonate Housing having efficency 100 lumes /watt complete suitable for work on 230 volt 50Hz AC supply i i/c connection testing etc complete as required.(Make -Philips /crompton/Havells /Bajaj/Wipro/Surya ).

SITC of Box type LED Batten with G13 lamp holders made of powder coated CRCA sheet with internal wiring suitable for retrofit LED T-8 tubelight with single / double side cnections i/c S/F 22 W LED polycarbonate tuberod t-8 (single side connection) with efficacy >100 lumes /watt existing fitting suitable for work on 230 volt 50Hz AC supply i i/c connection complete as required.(Make -Philips /crompton/Havells REGALBATTENT 8UPTO1X22WSSBSWH /Bajaj/Wipro/Surya ).

SITC of 42 Watt LED recess mounting luminare with high brightness SMD LEDs size 2 ft X 2 ft suitable for mounting on false ceiling having efficency 140 lumes /watt complete suitable for work on 230 volt 50Hz AC supply i/c connection testing etc complete as required.(Make -Philips /crompton/Havells /Bajaj/Wipro/Surya ). Havells Model PLUTONEO2X2PLR42WLED857S or Similar Superior

SITC of 24 Watt LED recess mounting luminare with high brightness SMD LEDs size 1 ft X 1 ft suitable for mounting on false ceiling having efficency 140 lumes /watt complete suitable for work on 230 volt 50Hz AC supply i/c connection testing etc complete as required.(Make -Philips /crompton/Havells /Bajaj/Wipro/Surya ). Havells Model PLUTONEO1X1PLR24WLED857S or Similar Superior

S/F of 18 W recessed mounted Slim, compact, auminum die cast edge lit panel. square fixture with opal diffuser and separate electronic driver suitable for work on 230 V etc as reqd (Make -Philips /crompton/Havells model LHEBAEP7IZ1W018 /Bajaj/Wipro ).

S/F of 12 W Surface mounting LED panel square flush model suitable for work on 230 V etc as reqd (Make -Philips /crompton/Havells /Bajaj/Wipro ).

S/F of 6 A ,Spike guard having 4 universal socket with single switch having fuse and on off switch complete with 1.5 meter power cord etc as reqd

S/F of 12 Modular polycarbonate surface Box with cover plcate having 04 nos 5A modular switch and 04 nos modular 5 A socket ,connection etc ( For computers )

S/F of 8 Modular polycarbonate surface Box with cover place having 02 nos 5A modular switch and 02 nos modular 5 A socket ,connection etc ( For computers )

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.

200 mm X 125 mm X 60 mm deep

Supplying and fixing following piano type switch/socket on the existing switch box/cover & switch box including connections etc. complete as required.

5/6A Switch

3 pin 5/6A Socket

15/16 amp switch

6 pin 15/16 amp socket outlet

3 mm thick phenolic laminated sheet

Ding Dong bell

Call bell Buzzer

5 A Plug Top

15 A Plug Top

Bell push

S/F of 25 mm wide PVC cassing capping on wall /roof wit suitalbe screw etc as reqd.

Supplying and fixing DP sheet steel enclosure on surface/recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following size of white colour flexible copper cable on surface/ recess, suitable for work on 230 volt, 50 HZ AC supply i/c connection etc as reqd

3x2.5 sq mm

SITC of 300 mm sweep heavy duty exhaust fan with protective guard ,900 RPM suitable for work on 230 V Single phase AC Supply ,i/c fixing the same wall surface /grill with suitable clamp i/c connection etc as reqd (Make -Almonard/crompton Crompton trans air /Bajaj/USHA).

SITC of 450 mm sweep heavy duty exhaust fan with protective guard ,1440 RPM suitable for work on 230 V Single phase AC Supply ,i/c fixing the same wall surface /grill with suitable clamp i/c connection etc as reqd (Make -Almonard/Crompton EXHD450-4-1/Bajaj/USHA).

SITC of 450 mm sweep oscillating type wall mounted fan with three speed control regulator having metalic body and metal blade ,1360 RPM speed suitable for working on 230 V 50 Hz single phase AC supply & i/c fixing on wall with suitable fastner , connection etc. complete as required (Crompton/Bajaj/orient Tarnado wall II /polar/Almonard/USHA)

SITC of 600 mm sweep Heavy duty oscillating type wall mounted fan with speed control regulator having powder coated guard and metal blade ,1440 RPM speed suitable for working on 230 V 50 Hz single phase AC supply & i/c connection etc. complete as required (Almonard markII /Crompton VORTEX/USHA /Polar )

SITC of 450 mm sweep Heavy duty oscillating type padestal fan with speed control regulator having powder coated guard and metal blade ,1440 RPM speed suitable for working on 230 V 50 Hz single phase AC supply & i/c connection etc. complete as required (Almonard markII /Crompton EXHD450-4-1/USHA /Polar )

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100mm width x 50mm x 1.6mm thickness

150mm width x 50mm x 1.6mm thickness

300 mm width X 50 mm depth X 1.6 mm thickness

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)

Supplying and making End Termination with brass compression glands for the following sizes of PVC / XLPE insulated PVC sheathed & armoured 1100 V grade cable including cost of crimping lugs / ferrules, compression glands, solder, cable sockets, insulation tap etc. complete as required.

4 X 16 sq. mm (28mm)

3½ X 50 sq. mm (35mm)

3½ X 70 sq. mm (38mm)

3 1/2 x 95 Sq.mm.

3 1/2 x 120 Sq.mm.

SITC 25mmx5mm thick G.I. strip for loop earthing on cable tray wall etc as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

SITC of 06 mm thick (ISI marked) rubber matting at the reqd locations etc complete as reqd.

Dismantling & removing the existing laid Power/control cables of package units, condenser units, complete by unscrewing from the related M.S. racks/tray etc as per directed by Eng.-in-charge.

SITC of photo electric smoke detector with the sampling cage on the detector junction box incorporating a solid state L.E.D and a high speed lightsansing chamber and other accessories etc. as per specification attached as reqd.

SITC of ionization smoke detector on detector junction box consisting of two ionization chamber containing amercium foil electronic circuits for contract etc.complete as per specifications attached.

SITC of electropneumatic type dual action heat detector consisting of an air chamber, flexible matal diaphragm, phosphor bronze spring and moisture proof design, trouble free ventmounted on detector junction box. The detector should be full proof design compact, reeged and uneffected of vibrations and work on dual action etc. completed as per specification.

SITC of response indicator made out of 16 gauge MS sheet having provision for cable entry from one side with brass gland and metal strip fitted with screw type red covers suitable for spering loaded lamp etc. complete as per specifications attached.

SITC of electronic hooter with suitable range of 25- 30meters with 4 Watt\output capable of public announcement as weel as being used for fire and faultin fire alarm panel i/c connection etc. as reqd

P/F 12mm thick both side laminated Exterior grade particle board for closeing of false ceiling opening i/c fixing the same with screw ,complete etc. as reqd.

JAI SAI ENGINEERING