SPECIAL REPAIR TO BUILDING AND PROVN OF STORE ROOM BY MODIFYING EXISTING GARAGE AT SARMAT RANGE UNDER GE (AF) JAMNAGAR NO 1

Amount

M & M for Pre-cast cement concrete block masonry with solid blocks Type C-1, 1:3:6 using 20mm graded aggregate , exc. 10 cm in width and setting in cement mortar 1:6, complete , complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces of wall incl pilasters / cornices etc and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489 : 2004 : Alkali & fungal resistant, dirt resistant, exterior paint of required shade (company Depot Tinted) with silicon additives @1.43 Liters/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Litre / 10 Sqm complete all as specified and as directed by Engineer-in-Charge.

M&L for 10mm thick Rendering on fair faces of brick work or concrete sureces in Cement Moratar 1:6 finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of Chalk whiting, on plastered surfaces, prepara-tory to distempering complete all as specified and as directed by Engineer-in-Charge.

M&L for Taking down Cement plaster(ceiling) on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engineer-in-Charge.

M&L for 5mm thick Rendering on fair faces of brick work or concrete sureces in Cement Mortar 1:3 finished surface even and smooth without using extra cement as in ceiling complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing newly plastered surfaces of ceiling and applying three coats of white wash as directed by Engineer-in-Charge.

M&L preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparing old plastered surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed.

Demolition for Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including wataring complete all as specified and as directed by Engineer-in-Charge.

M&L Hardcore(broken stone of boulder)of guage n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and as directed by Engineer-in-Charge.

M&L 100mm thick Cement concrete type B-2, 1:4:8 (using 40mm graded aggregate) as in sub base complete all as specified and as directed by Engineer-in-Charge.

M&L 25mm thick Cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished surfaces even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for cement concrete type B- 1, 1:2:4 (20mm graded aggregate) as in road / hardstanding of thickness 150 mm including steel formwork and finishing the surface using floater etc complete all as directed by Engineer-in-Charge

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in Cement Mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 20mm thick screed bed in Cement Mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 40 mm thick Cement concrete type C-2 , 1:3:6 (using 20mm graded aggregate) as in plinth protection /flooring finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M & L for screed bed or bedding layer of mortar 10 mm thick in cement mortar 1:4 including mixing only liquid water proofing compound as per manufactures instruction and finishing the surface fair and even complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound.

M & L for APP based polymer membrane minim weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non fabric ( wt not lass than 150 grm/sqm) land complete and including a caot of approved cold applied bitumenous oil based primer at the rate of 250 grm per sqm shall be laid by torch application mathod all as specified and as directed by Engineer-in-Charge.

S & F in position anodised aluminium power coated (minimum thickness of power coating 50 mircon) door shutter with frame, partly glazed wirh 5 mm tick tinted glass and partly panelled with 9mm thick perlaminated partical board with both side decorative laminnated including rubber bead, jointing cleat for fixing in position, aluminim door handle 150 mm size, aluminium barrel bolt 200mm size etc including taking down of old frame with shutter of any size all as specified and directed (a) Frame (top & side) section shell of size 101.60x44.75x2.4mm (section No 14021) (b) Vertical members of shutter secction shell be of size 85.00x44.45x2.00mm (section No 19560) (c) Topmember of shutter section shell be of size 83.50x44.45x2.00mm ( Section No 19596) (d) Lock rail (middle member) of shutter section shell be of size 150.00x44.45x3.00mm (Section No 19596 9e) Bottom member of shutter section shell be of size 150.00x44.45x3.10mm (section No 19584) (f) Glazing clip for securing glass of shutter shell be of 0.80mm thick (Section No 19370) Note :- Section nos given above are of make jindel, contactor may be ude similat sectio of other make mention in Appx 'B'.

S & F for position anodised aluminium power coated (minimium thickness of power coating 50 mircon) three track window (two shutter glazed and one shutter gauge) with frame, glazed with 4 mm thick tinted glass, and wirre gauge with stainless wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including rubber bead joining cleat for fixing in position concealed type lock for all two shutter PVC roller etc all as specified below, complete all as specified including taking dwon old window. (a) Frame (top & side section shell of size 92.00x31.75x1.50mm (section No 20831) (b) Frame (bottom) section shell of size 92.00x31.75x1.50mm (section No 20832) (c) Top & side member of shutter section shell be of size 18.00x40.00x1.55mm (section No 20738) (d) Shutter intercock section shell be size 18.00x40.00x1.45 mm (section No 20737) (e) Bottom member of shutter section shell be sixe 18x40x1.55mm (Section No 20736) Note :- Section nos given above are of make jindel, contactor may be ude similat sectio of other make mention in Appx 'B'.

S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail. Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F PVC Door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS Square tub, suppling & fixing in opening as per specification and drawing.

Hoisting and fixing 250 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindricla vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S & F 15mm bore Stop Valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S & F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight-170 gms)

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws

S & F Vitreous China wash basin, white, flat back, size 450 x 300mm excluding taps, waste, chain and plug and porcelain stopper but including brackets

S & F 32 mm bore in trap Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

M & L for 100 mm Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

S & F for 15mm Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S & F for 15 mm Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

M & L for 15mm GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

M & L for 20mm GI Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

RCC NP3 200 mm diameter Pipes laid on 150 mm thick PCC 1:4:8 caddle bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

S & F Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)RCC NP3 200 mm diameter Pipes laid on 150 mm thick PCC 1:4:8 caddle bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

S & F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S & F 100mm Traps ‘P’ or ‘S’ complete all as specified and directed by Engr-in-Charge.

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 100m but n exc 500m , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engr-in-Charge.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams, and similar work vertical of to batter, rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.

M&L for Reinforced cement concrete (Nominal mix)( type B1) 1:2:4 using 20mm graded aggregate) as Beams, cantilivers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge.

M & L for R C C (Nominal mix) type B1 (1:2:4) (20 mm graded aggregate) in Chajjas

M&L mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

M&L mild steel CRS TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, includiing cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L for Reinforced cement concrete (Nominal mix)( type B1) 1:2:4 using 20mm graded aggregate) as chajjas complete all as specified and as directed by Engineer-in-Charge.

S & F 1.00mm thick of laths as Steel rolling shutters, without ball bearing, as specified including rod, hasp and staples and one shop coat of primer, erected in position as indicated, complete: gear operated type with bevel gear box and crank handle.

M&L preparing old plastered surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed bed in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 10mm thick cement screed in CM 1:4 and jointed with pigment to match the shade of the slab including rubbing and polishing complete.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 25 sq mm (from exisiting Main Panel to DB)

Excavation in trenches n exc 1.5m wide and n.exc 1.5 m in depth for laying of cable,pole foundation .etc no exc 10 sqmon plan and nexc 1.5 m in depth and getting out.in soft/loose soil.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm.

Removing excavated material n exc 50m and depositing where directed at a level n.exec 1.5m above starting point.

Supply and filling fine sand to the full width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified. Note : Thickness of stone dust will be paid after cushioning after punning.

Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV, flat of size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed by Engr-in-Charge.

Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm ) dia

Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm ) dia

Supply and fix Valve, globe conforming to IS 9338 25 mm dia pipe

Taking down copper / aluminium point wiring (light, fan, socket or power socket ) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. including making good the disturbed surfaces complete all as specified and as directed.

S&F Switch piano, flush type single pole, one way 5 Amp including connection complete all as specified as directed by Engr-in-charge.

Supply & Fixing Socket outlet 3 pin, 6A, flush type complete all as specified as directed by Engr-in-charge.

S&F in repair switch socket combination flush type 6/16 Amps, 5 in 1 multipurpose including connection complete all as specified as directed by Engr-in-charge.

Supply & Fixing in Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified as directed by Engr-in-charge.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. complete all as specified as directed by Engr-in-charge.

Supply & fixing of sheet metal enclosures for fixing MCBs Single pole and neutral 4 way TPN , 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as specified as directed by Engr-in-charge.

Supply & fixing of Sheet metal enclosures for fixing MCBs Single pole and neutral 4 way, 240 volts with 200 Amps rated bus bar withe double door fixed on flush to the wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as specified as directed by Engr-in-charge.

Supply and fixing of MCBs Triple pole and neutral, 'C' Curve type capacity 32 Amps ,10KA & 240 Volts complete all as specified as directed by Engr-in-charge.

Supply and fixing of MCBs single pole and neutral, 'C' Curve type capacity 40 Amps ,10KA & 240 Volts complete all as specified as directed by Engr-in-charge.

Supply and Fixing of MCB single pole, 'C' curve type capacity 6 to 32 Amps capacity complete all as specified as directed by Engr-in-charge.

Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified as directed by Engr-in-charge.

S&F in repairs energy efficient decorative ultra slim LED tube light fitting with built in LED & integral LED driver 22 watt, aluminium extruded channel (approximate length 1200 mm) housing & diffuser with all accessories, fixing arrangement internally pre-wired, fixed in position & connecting complete all as specified as directed by Engr-in-charge.

Supply and fix in repair Energy efficient recessed mounted 36 watt LED luminaries (lumen efficiency not less thab 120 Lumen / watt) suitable for 600 x 600 mm grid ceiling along with flat diffuser along with constant current electronic driver, IP 65 Protection, UV resistant & polycarbonate cover complete all as specified as directed by Engr-in-charge. Make:- Lukar LKM2236WH or equivalent of make in CG/Havells/Wipro.

Supply and fix exhaust fans, 230mm sweep (BLDC) plastic type complete with cover all as specified as directed by Engr-in-charge.

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as specified as directed by Engr-in-charge.

M&L for fixing of Fan Hook and suitable size down rod inlcuding fastner, nut bolts etc complete all as specified as directed by Engr-in-charge.

Supply, installation and testing Air cooled Inverter based split AC unit with cooling functions and suitable to operate at ambient conditions of (22 Deg C +,- 3 in cooling mode) Air conditoner will have following conditons :- (a) Refrigerant - R-410 a/R-32 (b) EER- 5 Star Rating (c) Tonnage - 1.5 TR (d) Indoor Noise level - Not more than 40 Db (e) Filter - As recommended by OEM (f) Remote - As recommended by OEM including 02 Nos remote bty (g) Temp display, turbo mode and auto swing facility All specification will be as per IS-1391 (Part 2) and latest amendments Note: Cost of fwg items are deemed to be included:- (i) Copper pipe duly insulated between indoor/outdoor unit upto 10mm length for each unit. (ii) Making of holes in walls including civil work, sleeves and making good to the distrubed surface/ wall. (iii) PVC round sheathed copper cable of suitable size for connecting indoor & outdoor unit upto supply point as per site requirement. (iv) Outdoor stand of suitable size with all necessary fitting arrangement.

S&F sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB 32 Amp fixed properly on in concealed position complete all as specified as directed by Engr-in-charge. Make : Legrand/Schiender/ABB or equivalent

Supply and installed voltage stabilzer for automatic operation single phase naturally air cooled indoor type and designed for input varioution between 180V to 250V without voltage stabilzed at 230V with accuracy of (+, -) 2.5% and capacity 4 KVA complete all as specified as directed by Engr-in-charge.

Material & Labour for concealed sub main wiring with 2 run single core multistranded copper conductor cable, of size 4.0 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC conduit with all necessary fitting and including one run of single core multistranded copper conductor cable, of size 4.00 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete all as specified as directed by Engr-in-charge. Note: 2 Runs of main copper conductor, one run earth wire and PVC conduit will be measured as one running meter for payment.

M/S Rajendra Constructions (BID ID -3519764)

High Tech Consruction (BID ID -3519919)