Construction of 500 MTC Godown of Civil Supply Corporation at Jhandutta Distt. Bilaspur (HP).

Amount

cutting work in srface excavation by machnical means ( hydraulic mean/ excavator/ manual means i/c getting out and disposal of excavated earth all lead as directed by Engineer in charge.

Excavation work by machnical means( Hydraulic exczvztor/ manual means in foundation, trenches etc. in earth work in all kind of soil lifts upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed upto 5KM leads

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

Randomrubblemasonrywithhardstone in foundation andplinth including levellingupwithcement concrete 1:6:12 (1cement : 6 coarsesand : 12gradedstone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for : a) Foundations, footings, bases of columns, etc. for mass concrete

b) Columns, Pillars, Piers, Abutments, Posts and Struts

c) Suspendedfloors, roofs, landings,balconies and access platfor

d)Reinforced cement conc. Work in wall ( any thickness ) i/c attached pilaster butteresses , plinth and string course .

Reinforced cement concrete work including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : (a) foundation footings

b) columns up to floor two level

c)in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars as directed by Engineer in- charge i/c including carriage of material within all leads & lifts .

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Boulder filling under floors as directed by Engineer ion chargei/c including carriage of material within all leads & lifts .

P/F metal strips of 1:6mm thickness at junction with other floors. (a) 38 mm wide aluminium strips.

Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification).40 mm thick

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:4 (1 cement : 4 coarse sand)- 2nd class

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength and top cover conforming to IS: 4454- part 1 and M.S. top cover of required thickness for rolling shutters.steel work in single section, fixed with or 80x1.25 mm M.S. laths with 1.25 mm thick top cover.

Providing and fixing ball bearing for rolling shutters as directed by Engineer ion chargei/c including carriage of material within all leads & lifts .

Providing and fixing angle iron door frame double rebate manufatured from two angle section of 40x40x6mm and MS flat 30x5mm as per drawing and design including hinges jambs locks and if required angle threshhold of MS asngle 50x25mm welded or rigidly fixed by mechanical means lugs with split and tail to each jamb including steel butt hinges 2.5mm thick with provision for locking arrangement and shock absorber specified and applying a coat of approvede steel primer after proper pretreatment of surfaces as directed by Engineer ion chargei/c including carriage of material within all leads & lifts .

Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill.

Steel work welded in built up sections, trusses and framed work, i/c cutting, hosting, fixing in position and appling a priming coat of red lead paint:- (a) In trusses and trussed purlins in building.

b)In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing 0.50 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 mocrones primer coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required asper the direction of Engineer- in- charge.

Providing and fixing ridges 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 mocrones primer coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required asper the direction of Engineer- in- charge.

Providing and fixing 15cm wide 45cm overall semicircular plain G.I.sheet qutter with iron brackets 40x3 mm size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design. 0.63mm thick sheet.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and fixing flushing 38cm overall with 0.60 mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5 mocrones primer coating i/c fixing with prepainted iron J or L hooks bolts and nuts 6 mm dia meter with prepainted limpet and rubber washers complete with all accessories as required asper the direction of Engineer- in- charge.

15mm cement plaster in singale coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

15mm cement plaster in singale coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Appling one coat of water thinable cement primer of approved brand and manufacture on wall surface. after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Painting two coat on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

Providing and fixing on wall face PVC (D-Plast)rain water pipe of working pressure not less than 4kg/sqm. including filling the joints with approved adhesive complete.100mm dia pipes.

Providing and fixing on wall face PVC (D-Plast) accessories for rain water pipe of working pressure including filling the joints with approved adhesive complete.100mm dia PVC plain bend.

Providing & laying cement concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in walls

Half brick masonry in comman burnt clay building bricks in superstructure avobe plinth level upto floor two level with cement mortar 1:4(1cement:4 sand) 1st class bricks

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in Charge. 80 mm thick

Providing and laying cement concrete 1:3:6(1cement:3sand:6graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) as directed by Engineer ion chargei/c including carriage of material within all leads & lifts .

Construction of toe walls for protection of slopes as per drawing & techinical specifications Clause-1302.5 Nominal Mix 1:3:6 (1cement:3sand:6graded stone agregate 20mm nominal size ) i/c form work

Providing and laying PVC pipes in weep holes. 100mm dia.

Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st. Class hard wood/sal wood.

Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size).

Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 35mm thick 2nd. Class Teak Wood.

Providing and fixing wire guage shuter using galvanised M.S. wire guage of I.S. guage designation 85G with wire of dia 0.56mm for door windows and clearstory windows with necessary screws 30 mm thick second class Teak wood

Providing & fixing aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete (i) 300mm x 16mm.

Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required shade & colour.(a)200 x 10mm

Prooviding and fixing aluminium finshed brass handles with nuts and secrews etc complete. (a) 125mm.

Providing and fixing oxidized MS hooks and eyes 250mm

P/F 100mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete

P/F bright finished door closer 150mm

Providing and fixing 10mm thick antiskid water proof stain and impact resistant heavy duty vitrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, trade of steps and landing laid over12mm thick cement mortor 1:3 ( 1 cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

P/L ceremic glazed floor tile 300x300 mm thickness to be specified by the manufacture) of 1st quality conferming to IS : 15622 of approved make in colour such as white Ivory, gray fume red brown,laid on 20mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry. Kajaria/Oriented Make.

Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long.

P/F white vitrous china pedestal Type water closet squatting pan ( European type WC pan ) with seat and lid, 10litrs low level white PVC flushing cistern, i/c flush pipe with manually controlled device ( handle lever) conferming to IS:7231 with all fittings and fixture complete ( earth work , bed conc. Foot rest and trap to be measured and paid for separetaely W.C pan with ISI marked white solid pilastic seat and lid.

P/F PVC P'S' trap for water closet ( aquatting pan) ISI marked i/c jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.

P/F vitrous china wash basin with CI brackets ,15mm CP brass piller taps, 32mm CP brass waste of standred pattern ,i/c painting of fittings and brackets cutting and making good the walls wherever required white vitreous china wash basin size 630x450 mm with a single 15 mm CP brass piller tap.

Providing and fixing PVC connection 45cm length 15mm dia.

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality.

P/F chromium plated brass soap dish with brackets fixed to wooden cleats with C.P Brass screw.

Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 750mm x 20mm.

Providing & fixing CP brass bib tap with capastan head 15mm dia. (Jaguar/Excel Make).

Providing & fixing CP stop cocks 15mm dia (Jagour/excel Make).

Providing & fixing C.P. pillar tap with capaston head. 15mm dia.

Providing & fixng PVC waste pipe for wash basin or sink 32mm dia.

P/F 100mm sand cast iron grating for gully floor or nahani trap

P/F GI pipes complete with Gi fittings and clamps i/c making good the wall etc, concealed pipe i/c painting with anti corrosive bitumen making good wall 15mm dia nominal bore

Providing & fixing pvc floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia.

P/F 8mm dia CP/SS jet with flexible tube up to 1.00 mtr long for European WC sheet

P/F soil waste and ventilating pipees :- 100mm dia sand cast iron S&S pipe as per IS:1729

P/F sand cast iron accesseries :- (a) P/F SCI plain bend 100mm

b) P/F double equal branch 100x100x100mm

c) P/F single equal plain junction 100x100x100mm

d) P/F coller 100mm

P/F lead caulked joints to SCI pipes of diameter 100 mm

P/F PVC water storage tripal core tank 1000 lltr capacity complete in all respect as directed by Engineer in charge

Constructing Man holes with RCC top slab 1:2:4 ( 1cement @ sand :4 graded stone agg 20mm nominal size foundation conc 1:4:8 in side plastring 1:3 in side size 800x800 500mmdeep 200mm thick brick wall in cement mortar 1:3 ( 1cement :3sand ) as directed by Engineer in charge i/c including carriage of material within all leads & lifts .

Satish Kumar (BID ID -519432)

Sanjay Kumar (BID ID -519357)

KHUB RAM (BID ID -519531)

Sada Nand (BID ID -518651)

Ramesh Chand Govt. Contractor (BID ID -519702)