Construction Of rampaduka ghat under CM GHosana 898/2021

Amount

E/W in excavation in foundation

CC 1:3:6 concreating for ghat and flood protection

Steel reinforcement

RR 1:6 Stone masonary

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand), including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. 11.29.1 Red sand stone (item rate deducted @ 18% of 1193.3 and add as G.ST )

Dewatering from foundation of abutments and wing walls (with pump capacity 4000 lit per Hr) including wages of operator and fuel including supply of all material labour and T&P etc. required for proper completion of the work

Construction of coolie walling including supply of all material labour T&P etc. required for proper completion of the work as per direction of engineer in charge (as per PWD Uttrakhand specification for diresion of water)

Providing and laying of Empty cement bags (Gunny Bags) filloed with local sand and tightened using sutli and carriage upto site including preparing subgrade before placing in position also including supply of all material labour T&P etc. required for proper completion of the work

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 10.13.1 Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Flat 40 mm width 6 mm thick railing

Brick masonry work in cement mortar in substructure complete excepting pointing and plastering, as per drawing and technical specification in cement mortar 1:4

Plastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.40x40x5 mm angle for door frame

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification. R.C.C. grade M 25

Supplying, fitting and placing TMT bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification

30 mm thick factory made glass fiber reinforced plastic flush door shutter i/c carriage

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr /10 sqm

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Maintanance of civil work for 3 year including watch and ward and general cleaning Etc

SANGAM CONSTRUCTION (BID ID -357484)