Construction of additional washrooms for the Hostel at Arts Campus Ganderbal

Amount

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Supplying & filling of GSB/River bed material of required size including spreading in layers as per directions of Engineer Incharge & hand ramming in layers including watering & all carriages leads, lifts upto woking site. All complete job including material & labour involved for completion of job.

Providing and laying in position cement concrete of specified grade excluding the cost of centering & shuttering. All works upto plinth level 1:4:8 ( 1cement: 4Coarse sand: 8 graded stone agg. 40mm nominal size) crusshed incl. of all carriages complete.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth/ above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more incl. of all carriages complete.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps, etc complete. 40 mm thick with 20mm nominal size stone aggregate

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar cum

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

12mm plaster on fair side of brick/concrete work in 1:6 mix incl c/o frame work anf incl. of all carriages complete.

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper, having VOC (VolatileOrganic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats whereverrequired, to achieve even shade and colour. One coat

Providing and Fixing of wood work in frames of doors, windows, clerestory windows & other frames, wrought framed & fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fasteners shall be paid for separately), using K.D wood (Non-local), including all carriages leads & lifts upto site of work. Complete in all respects.

Providing and Fixing of 35mm thick doors/windows shutters using K.D wood (Non-local) excluding cost of necessary paneling which shall be paid for seperately but including all carriages leads & lifts upto site of work. Complete in all respects including hinges

Providing and Fixing of 35mm thick doors/windows wire guaze shutters using K.D wood (Non-local) excluding cost of necessary paneling which shall be paid for seperately but including all carriages leads & lifts upto site of work. Complete in all respects including hinges

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Float glass panes: 4 mm thick glass pane (weight not less than 10kg/sqm).

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing chromium plated brass handles with necessary screws etc. complete100 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm

P/F of geyser of 50 ltrs capcity white color of approved brand venus/racold/cera/bajaj/ AO smith complete with all necessary geyser bolts/fire bolts complete in all respects as per the directions of Engineer Incharge

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia each

Providing and fixing 100 mm PVC pipe SS grating (anti cockroach type) for gully trap.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder : C.P. brass each

Providing and fixing pvc connections for wash basin, geyser, flush tank with all necessary fittings. Complete job

Providing and fixing 110mm dia PVC soil waste & vent pipes including jointing & collars. Complete Job

Providing and fixing 75mm dia PVC soil waste & vent pipes including jointing & collars. Complete Job

Providing and fixing 75mm dia PVC collar ncluding jointing & collars. Complete Job

Providing and fixing 110 mm dia PVC including jointing & collars. Complete Job

P/F of 110mm dia PVC plain branches single equal junction of required degree with acess door inclusive of 3mm thick bitumastic felt washer including jointing & cost of clips etc. Complete Job

P/F of 110mm dia PVC plain branches double equal junction of required degree with acess door inclusive of 3mm thick bitumastic felt washer including jointing & cost of clips etc. Complete Job

P/F of 110mm dia PVC plain branches single unequal junction of required degree with acess door inclusive of 3mm thick bitumastic felt washer including jointing & cost of clips etc. Complete Job

P/F of 110mm dia PVC plain branches double unequal junction of required degree with acess door inclusive of 3mm thick bitumastic felt washer including jointing & cost of clips etc. Complete Job

P/F of 110mm PVC offset including jointing & cost of other necessary fittings/adhesives with 10cm projection. Complete Job

P/F of 110mm PVC offset including jointing & cost of other necessary fittings/adhesives with 15cm projection. Complete Job

P/F of 110mm PVC plain bend of required degree with acess door inclusive of 3mm thick bitumastic felt washer & cost of jointing etc. Complete Job

P/F of 75mm PVC bend of required degree with acess door inclusive of 3mm thick bitumastic felt washer & cost of jointing etc. Complete Job

P/F of C P Brass basin mixer/sink mixer 15mm dia of approved brand, quality. Complete

P/F of C P Brass health faucet 15mm dia of approved brand, quality. Complete with extension and holder

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Reducer 15mmx25 mm

Tanki Nipple 40 mm dia 100 mm long with nuts etc.as per site requirment

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm, 78 mmwide and effective height of 88 mm, weighing not less than170 gms

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

P/F of air cap for 75 mm soil waste pipe. Complete job

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls 15 mm nominal dia Pipes metre

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.External work 32 mm nominal dia Pipes

Construction of soakage pit by way of providing & fixing pre cast reinforced cement concrete rings of 900mm internal dia of Specified thickness with top RCC cover including handling hoistiong fixing in position & jointing with 10mm thick cement mortar 1:6 upto required depth incl cost of necessary excavation as per the requirement & disposal of excavated soil as directed. Complete Job

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with PVC cover , inside & outside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : (Size 45x30x60 cm)

Javaid Ahmad Sheikh