Construction of Anganvadi - Nandghar (Frame structure) at Various Village of Tankara Taluka Package No.04 Ta.Tankara Dist. Morbi (Bangavadi-2,Tankara-1,Meghpar(Za.),Dhruvnagar)(2nd Atte mpt)

Name of Work :-Construction of Anganvadi - Nandghar (Frame structure) at Various Village of Tankara Taluka

Package No.04 Ta.Tankara Dist. Morbi (Bangavadi-2,Tankara-1,Meghpar(Za.),Dhruvnagar) (2nd Attempt)

Bill of Quantities

Memorandum showing items of works to be carried out

Item Discription of Item (With Brief Specification and reference to Quantity Unit Rate In Amount

No. book of Specification) Figures

In Figure Rs. Ps

1 Excavation for foundation upto 1.5 m depth including sorting out 200.800 Cum 157.32

and stacking of useful materials and disposing off the excavated

stuff upto all lead.(B) Dense or Hard soil

2 Excavation for foundation upto 1.5 m depth including sorting out 3.200 Cum 267.08

and stacking of useful materials and disposing off the excavated

stuff upto all lead.(C) Hard Murrum.

3 Filling available excavated earth (excluding rock) in trenches. 59.000 Cum 136.91

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each disposited layer by ramming

4 Filling in plinth with sand under floors including watering 28.400 Cum 481.80

ramming, consolidating and dressing complete

5 Filling in foundation and plinth with murrum or selected 39.200 Cum 301.77

soil in layers of 20cm. thickness including watering, ramming

and consolidating etc. complete.

6 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse 41.700 Cum 2945.16

sand : 8 B.T. machine crushed stone aggregates 40 mm nominal

size) and curing etc. complete excluding cost of form work in

foundation and plinth.

7 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 23.800 Cum 4684.11

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in (A) Foundations, footings, base of

columns and mass concrete.

8 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 18.800 Cum 8049.84

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Columns up All Floor Level

9 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 22.000 Cum 4594.88

using B.T. stone aggregate & curing complete including the cost of

form work but excluding the cost of reinforcement for R.C.C. work in

10 Brick work using common burnt clay building bricks having crushing 44.000 Cum 4245.09

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5 (1- Cement : 5 -fine sand) (Conventional)

11 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 16.800 Cum 6365.89

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Beams For All Floors.

12 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 27.200 Cum 6650.63

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Slab for all floor level.

13 Providing and laying ordinary cement concrete 1:1½:3 (M-200) 5.500 Cum 8173.89

using B.T. stone aggregate and curing of concrete complete,

including the cost of form work but excluding the cost of

reinforcement for R.C.C. work in Lintels for all floor level.

14 Providing and laying ordinary cement concrete 1:1½:3 (M- 5.600 Cum 8173.89

200) and curing complete including the cost of form work but

excluding the cost of reinforcement for reinforced concrete

work in Chajja For All Floors.

15 Providing TMT Bar FE 500D reinforcement for R.C.C. work 11300.000 Kg 77.28

including bending, binding and placing in position complete for All

16 Providing throating or plaster drip and moulding to R.C.C. 62.400 Rm 43.04

Chhajja by making 5mm to 15mm wide grove as per design

17 Brick work using common burnt clay building bricks having crushing 101.400 Cum 4526.80

strength not less than 35 kg/Sq.Cm. in superstructure above plinth

level upto All floor level in Cement Mortar 1:5. (1- Cement : 5 -fine

sand) (B) Conventional brick etc. complete

18 Half brick masonry in common burnt clay building bricks 88.000 Sqm 684.26

having crushing strength not less than 35 Kg/Sq.Cm. in

Superstructure above plinth level upto All Floor level in Cement

mortar 1:4 (1- Cement : 4 -coarse sand ) (Conventional).

19 Providing 15mm thick cement plaster in single coat on Rough 400.000 Sqm 231.01

(Similar)side of single or half brick walls for interior plastering upto

floor all level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) including finishing with a floating coat of neat

cement slurry for Ground Floor.

20 Providing 15mm thick cement plaster in single coat on Rough 22.800 Sqm 180.39

(Similar)side of single or half brick walls for interior plastering upto

floor all level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) finishing with a floating coat of neat cement

21 Providing 10 mm thick cement plaster in single coat on brick / 360.000 Sqm 212.15

concrete on ceilings and sofits of stairs for interior plastering upto

floor all level and finished even and smooth in (i) Cement mortar 1:3

(1-cement:3-sand) including finishing with a floating coat of neat

cement slurry Ground Floor

22 Providing 20mm thick cement plaster in single coat on single or half 497.000 Sqm 281.12

brick walls for interior plastering upto floor all level and finished

even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

including finishing with a floating coat of neat cement slurry for

23 Finishing wall with weather proof exterior emulsion paint on wall 497.000 Sqm 120.26

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials etc. complete.

24 Applying two coats of putty & two coats of primer of approved 704.000 Sqm 40.59

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth.

25 Wall painting (three coats) with plastic emulsion paint of 400.000 Sqm 126.91

approved brand and manufacture on undecorated wall surface

to give an even shade including throughly brushing the

surface free from mortar droppings and other foreign matter

and sand papered smooth.

26 Ceiling painting (three coats) with plastic emulsion paint of 304.000 Sqm 132.44

approved brand and manufacture on ceiling and soffits of

slab surface to give an even shade including throughly

brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

27 P & L 24" x 24" vitrified 8 to 10 mm thick tile flooring over 20 mm 180.000 Sqm 1476.53

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on

new surface or fixing on existing flooring by adhesive material

including dismentaling of existing flooring and jointed with color

cement slurry including finised with flush pointing & cleaning the

surface etc. complete for light shade

28 Providing and fixing pre-cast Rubber Dye / steel Dye inter 56.000 Sqm 706.92

locking concrete block 60mm thick with grade of concrete M300

pnumatic compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 : 2006 including 35 mm

Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

29 Providing and fixing Machine cut & Polished Blue Kota stone in 9.600 Sqm 1412.24

7.5 cm width Strip flooring for Ramp even grade over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) laid over and jointed with grey cement slurry mixed with

pigment to match the shade of slab including rubbing and

polishing etc. complete. (A) 25mm thick

30 Providing and laying Ceramic tiles 6mm thick in flooring treads of 22.400 Sqm 1017.30

steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

31 Providing and laying Ceramic tiles 6mm thick in skrting risers of 88.800 Sqm 1090.31

steps and dedo on 10mm thick cement plaster 1:3 (1-cement :

3-coarse sand) and jointed with white cement slurry

32 Providing and fixing 18 mm thick mirror polished Granite stone of 84.000 Sqm 2177.90

machine cut & full round edge and polished of approved quality in

cladding on sill and around the Doors / windows / ventilation with

mm thick cement plaster 1:3 and jointed with white / matching

pigment cement slurry & adhesive, including polishing & moulding

of exposed edges etc. complete for all floor level as directed by

Engineer-in-charge.

33 Providing and laying water proofing treatment on terrace with 200.000 Sqm 1068.15

broken China mosaic tiles flooring over average 50 mm C.C. 1:2:4

bedding for maintaining slope for plain and curve surface & 12 mm

to 20 mm of broken piece of ceramic / glazed tiles (one for more

colour as directed) to be laid over cement mortar bedding of C. M.

1:3 (1 cement : 3 sand) contain one KG of water proofing materials

per bag of OPC at plain or / and slops and to be tempered to bring

mortar ceramic up to surface with using white cement and colour

pigment, including rounding of junctions and extending them up to

15 cm along the wall and curing with bends any patterns or design

as per drawing and cleaning by using oxalic acid etc. complete.

34 Constructing a Sandwich type cooking platform of 60 cm width and 6.800 Sqm 5443.06

70 cm height resting with Granite polished stone top and 100 mm

height faces in exposed faces with 18 mm thick of polished Granite

stone of approved colour and quality on 25 mm x 2 No polished

Kota stone sandwich supports, polished kota stone shelves and

fixing stone using cement mortar 1:2 (1 cement : 2 fine sand) for

sandwich and fitting at bottom & edges with water proof rigid

adhesives, including mocking necessary grooves in walls, polishing

and making edges etc. complete as directed by Engineer-in-charge.

(Only top clear area of platform shall be measured and paid for)

35 Providing and fixing 35 mm thick shutter for door having factory 23.200 Sqm 4116.87

made solid core, melamine faced, three layered resin flushed door

of approved brand and manufacture, with 1 mm thick decorative

laminated sheet on both side with 6 mm thick and 35 mm x 35 mm

specially shaped moulded teak wood beading fixed around the door

with necessary fixtures and fastenings like S.S. butt hinges, S.S.

Aldrop, S.S. Handle size 15 cm long, stopper, door closers arrow

type etc. complete as per detail colour & pattern approved by

Engineer-in-charge. (As directed by Engineer in charge & approved

drawing and design etc.)

36 Providing and fixing extruded colour anodized aluminium three track 41.600 Sqm 3171.70

sliding window having aluminium section having outer frame for

bottom member of size 92.00 x 31.75 x 1.30 mm size weight of

KG / Rmt and outer frame for top and sides members size 92.00 x

31.75 x 1.50 mm size weight of 1.06 KG / Rmt, for shutters using

top and bottom size 40 x 18 x 1.29 mm size weight 0.456 KG / Rmt

& interlock member size 40 x 18 x 1.29 mm size weight 0.456 KG /

Rmt & handle member size 40 x 18 x 1.29 mm size weight

KG / Rmt with 5 mm thick transparent bronze colour tinted float

glass for shutter and fixing wire net shutter of Stainless Steel wire of

304-grade of IS Gauge designation 85-G with wire of 0-56 mm

diameter as a third sliding shutter with necessary fixtures and

fastening like rubber gasket and transparent silicon sealant glass

fixing to frame etc. complete as per drawing and instruction of

Engineer-in-charge.(As directed by Engineer in charge &

approved drawing and design etc.)

37 Providing and fixing M.S. plain Grills (Safety Grill) / Shutter of 1890.000 Kg 109.58

required pattern to wooden frames of window / Door etc. with M.S.

flats at required spacing and frame all-round square or round bars

with round handed bolts and nuts or by screws, including primer

coat of approved quality and two coats of oil painting etc. complete.

38 Providing erecting and fixing double coated ISI water tank of 4000.000 Lit 3.94

required capacity each with all necessary fittings and

connection etc. complete on terrace

39 Providing and fixing G.I. Rain water spout of 50mm dia. and 60.000 No 101.90

40 Providing, laying and jointing in true line and level 110 diameter 100.000 Rm 876.90

U.P.V.C (Type B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm

heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

41 Providing, laying and jointing in true line and level 160 diameter 40.000 Rm 834.38

U.P.V.C (Type B) conforming to IS 13592-1992 with one

end plain and other end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm

heigh at every 2000 mm center to center or shall be concealed

in walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and

jointed with adhesive solvent cement including cost of all

42 Providing laying and jointing in true line and level 40mm dia. 40.000 Rm 148.11

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be concealed

as directed including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost

of all materials.

43 Providing laying and jointing in true line and level 25mm dia. 80.000 Rm 91.83

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

44 Providing laying and jointing in true line and level 15mm dia. 40.000 Rm 72.64

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

45 Providing and fixing concealed center point to wall ceiling & floor 40.000 Rm 253.82

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia. nominal bore

tube fittings and clamps including making good the wall,

ceiling and floor etc. complete. 25 mm.

46 Providing and fixing concealed center point to wall ceiling & floor 40.000 Rm 170.35

CPVC (SDR 13.5) PIPE having National Sanitation Foundation

(NSF) seal for potable water of following dia. nominal bore

tube fittings and clamps including making good the wall,

ceiling and floor etc. complete. 15 mm.

47 Providing and fixing Gun metal check or non-return fullway wheel 8.000 No 663.42

valve.(E) 40mm dia.

48 Providing and fixing ball cock of approved.quality as 4.000 No 189.83

directed.(A) Copper Metal (ii) 50mm dia.

49 Providing and fixing water closet squatting pan (Indian type W.C. 4.000 No 1480.60

pan) size 580 mm (Including 'P' or 'S' trap, foot rests and excluding

earthwork, bed concrete) Including providing and fixing 100 mm

size “P” or “S” trap for water closet squatting pan including jointing

the trap with the pan and soil in cement mortar 1:1 (1 cement :

coarse sand) including P & F in cement mortar 1:3 (1 cement :

coarse sand) A pair of white vitreous china 250 mm x 130 mm x

mm foot rest for long pattern squatting pan water closet, including P

& F G.I. inlet connection for flush pipe with W.C. pan (A) Vitreous

china - (i) Long pattern-white colour.

50 Providing and fixing Wash basin with single hole for pillar tape with 4.000 No 2242.98

C.I. or M.S. brackets painted white including cutting holes and

making good the same but excluding fittings. (A) vitreous china : (ii)

Flat back wash basin 550 mm x 400 mm size, (i) in white colour,

including fixing 32 mm dia C.P. Brass waste pipe, 32 mm dia M. I.

Fisher union, 15 mm dia stop tap and 15 mm dia capstan head pillar

tap, screw down high pressure with screws shanks and back nuts &

inlet & outlet connections for wash basin etc. complete.

51 Providing and fixing Stainless Steel (Grade 304) Kitchen Sink 4.000 No 3030.00

(i) 600mm x 450mm x 200mm size of 1.2mm thickness, with

sound-dampening pads, including cutting/fixing in platform with

approved sealant, complete with CP waste coupling, waste

pipe, 15mm dia pillar & Stop cock of approved brand with

connection 15mm dia. flexible PVC pipe, including

transportation to site and all necessary labour for installation,

52 Providing and fixing brass screw down stop tap. (A) 15mm dia. 8.000 No 205.82

53 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 12.000 No 586.27

100 mm diameter with jali of the following nominal diameter of

self cleansing design with C.I scread down or hinged grating

including the cost of cutting and making good the walls.

54 Providing and fixing S.W. gully trap with C.I. grating brick 4.000 No 1246.91

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i) Square

mouth traps.(B) 150mm x 100mm size P or R type

55 Providing and fixing C.P. brass towel rail comlete with C.P. 4.000 No 616.42

brass brackets fixed to wooden plugs with C.P. brass

scews.(B) 600mm x 20mm size.

56 Providing and fixing in position PVC cowel went to pipes 4.000 No 101.00

57 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size 4.000 No 958.16

having weight not less than 35Kg.

58 Constructing brick masonry chamber for underground C.I. 4.000 No 7180.44

inspection chamber and bends with bricks having crushing

strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover

23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc. complete.(iii)

Inside dimensions 600mm x 850 mm and 450mm deep for

pipe lines with three or more inlets.

59 Constructing brick masonry chamber for underground C.I. 4.000 No 3660.75

Inspection chamber and bends with bricks having crushing strength

not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total weight of cover with

frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of

frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(ii) Inside dimensions 500mm x 700 mm

and 450mm deep for pipe line with one or two inlets.

60 Providing Sock well of inside Dimension 3.00 mt. Deep & 2.00 mt. 4.000 No 24186.83

Dia. Incl. Excavation, honey comb masonary work in C.M. 1:6 incl.

Covering the top with slab and providing mainhole cover incl.

Providing vatas and curing etc. complete..

61 Providing and fixing 90 cm high Stainless Steel railing made 8.000 Rm 3760.33

from anticorrosive 304 grade S.S. pipe of 50 mm dia. (16

gauge) as hand rail with S.S.304 grade baluster of 32 mm dia

(16 gauge) as a vertical support fixed in RCC Slab/ steps of stair

at 1.2 mt. c/c including three horizontal S.S. pipes of 16 mm dia

(16 gauge) at equal distance fixed by 16 mm dia (16 gauge)

S.S. pipe with baluster including accessories as per detailed

drawing as directed etc. complete

62 Providing and fixing M.S. Fan clamps type 1 to 16mm dia M.S. 28.000 No 136.13

bar bent to shape with hooked ends to R.C.C. slabs curing,

laying including painting the exposed portion of loops, all as

per standard design complete.

63 Providing and fixing 0.60 Meter high fencing with 1.10 ( Y shape) 30.000 Rm 301.58

meter long M.S. angle posts 40mm x 40mm x 6mm and oil painting

3 coats fixed at 3.00 Mt. c/c with Three horizontal lines and two

diagonals of galvanized steel barbed wire weighing 9.38 Kg per

100meter strained and fixed to posts with G.I. staples including

fixing the posts in Compoundwall masonary & Coping etc.

64 Providing, Painting, Lettering " Nandghar" Logo board as per design 4.000 No 2020.00

specified and providing two Direction side of the Building

photograph copies - 4 of each in postcard size of the completed

work as directed 23cm.x45cm.

65 Providing, Painting, Lettering, of Softboards, blackboards, Storage 4.000 Job 50500.00

areas as per drawing including all material & taxes etc. complete as

per direction of Engineer in charge

66 Providing and Painting of typical Logo. Writing letter or figures on 4.000 Job 4040.00

any surface with Thick White Paint Incl. stops, comas, hyphens etc

as required):-Indian (Letters/figures . as per instruction of engg. In

67 Providing Mic. Play / Activities and out door installations & Notice 4.000 Job 9090.00

Board as per drawing including all material & taxes etc. complete as

per direction of Engineer in charge

68 Point wiring for Light / Fan / Bell / Primary Point with 2-1.5 Sq.mm & 40.000 Point 359.56

earth wire of 1.5 Sq.mm (green) both are of ISI marked 1.1 kv

grade FRLS PVC insulated multistrand copper wires, in following

type of pipe to be erected concealed in / flushed on wall /ceiling,

complete with 6A Tissino Type ISI marked flush type switch / bell

push and accessories erected on Metal / PVC Box covered with

mm thick PC (Polycarbonate) / Acrylic sheet with necessary Lamp

holder / ceiling rose / H.D. Connector as directed. (c) with oval

conduit /pvc casing capping double lock type

69 Point wiring for independent PLUG with following size mains 24.000 Point 404.00

earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in following type of

pipe to be erected concealed in /flushed on wall/ceiling , complete

with ISI marked 3 / 5 Pin socket and tissino type switch erected with

earth continuity connection erected on Metal / PVC box covered

with 3 mm thick PC(Polycarbonet) / Acrylic sheet. (h) with oval

conduit /pvc casing capping double lock type

70 Mains with ISI marked electrolyte stranded copper conductor, Non 200.000 Rm 83.83

PVC Zero Halogen free fire retardant insulated copper conductor,

insulated wire (HFFR) conforms to IS-694, erected in existing pipe

with 1.5sq. mm copper conductor of same specifications for earth

continuity of following size. [i] 3 wire 1.5 sq.mm

71 Supplying & erecting earth pit of minimum bore dia.150mm size 4.000 No 4591.46

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications. (a) For

Electrical Installation up to 440V in normal soil Length of pipe -

Mtr Back filling compound - 1 Nos Bag of 15 Kg.

72 Providing & Erecting following Shockproof tissino type accessories 8.000 No 31.31

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal

Box. erected on wall/ ceiling. (1) One no Single pole 6 A Switch /

73 Providing & Erecting following Shockproof tissino type accessories 8.000 No 47.47

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal

Box. erected on wall/ ceiling. (3) One no Single pole 16 A Switch

74 Providing & Erecting following Shockproof tissino type accessories 8.000 No 219.17

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/ Metal

Box. erected on wall/ ceiling. (14) Electronic Hum free EME Socket

Type Steps Fan Regulator

75 Providing & erecting Switch board for Computer or electric 8.000 No 332.29

apparatus consisting of following items in single board erected on

PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic

sheet erected as directed 1 no. 6A/16A universal plug-switch

combined. 4 nos. 6A Switch 4 nos. 6A 5 pin Plug

76 Providing & erecting 240 V MCB double pole switch for motor & 4.000 No 362.59

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity (B)

40 Amp. Cat.III

77 Providing and erecting Sheet Steel powder coated MCB distribution 4.000 No 702.96

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without

MCB to house appropriate nos. of MCBs. (The DBs should be used

of same company of MCB to be used) (A,a,iii)) Single phase 8 way

78 Supplying & erecting 5 stage single reverse osmosis water 4.000 No 15620.66

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

buster DC pump capacity 80 psi, mention with 40 psi inline type

post carbon filter auto low & high pressure switches with following

size of storage tank & LPH capacity & erected as directed [B]

Ltr / Hr with 30 Ltr. Storage Tank

79 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 12.000 No 535.30

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K

to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver

efficiency > 85 % ( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.)(A) Tube Light

with integral driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional

80 Supplying and erecting led lamps with following wattage capacity of 16.000 No 404.00

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral

type, with PC diffuser suitable LAMP holder (v) 21 to 30 watts Cat

81 Providing and erecting Approved make Ceiling fan with double ball 12.000 No 1596.81

bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm.

sweep complete, canopy erected on existing hook or clamp with

earthing. [Make shall be approved by Engineer in charge]

82 Approved make ELCBs / RCCBs conforming to IS: 12640 and 4.000 No 1893.75

having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V. having

characteristic of quick action & tripping with all advance feature &

do not incorporate any electronic component. for following Max.

rating erected as directed (ii) 40Amps. DP Cat-II

83 Providing & erecting open well type horizontal mono block pump set 4.000 No 8728.42

with stainless steel body having following specification (A) 0.5 H.P.

single phase open well motor pump set having discharge of

LPM @ 15 mtr. head suitable for 32 mm dia. delivery pipe with

control panel Cat. II

84 Providing and Fixing SS 304 Foldable Checking bed having size 4.000 No 5555.00

1.50 X 0.60 X 0.75 mm including using of 25mm dia pipe, SS 2mm

thick, matter of 25.4 (1") of 40 density, cover with regine cloth of

approved quality etc completed as directed by Engineer incharge.

85 Providing and Placing IT wood writing table having size 1.50 X 0.75 4.000 No 14140.00

X 0.75 mt with one side drawer with using of 19mm thick WP wood,

top cover with 1 mm thick wood type Formica including using of all

necessary material & labour etc completed as directed by Engineer

86 Providing and fixing Fabric cloth Curtain having length 1.8 mtr for 40.000 Rm 858.50

covering of checking area including using of alluminum sliding

channel etc complete as directed by Engineer incharge.

87 Providing and Fixing of SS 304 Hanger for bag including using all 80.000 No 252.50

necessary materials like SS rail, screw etc completed as directed by

Engineer Incharge.

88 Providing and Fixing pin cushion display board having size 1.20 X 4.000 No 606.00

0.75 mt including using of alluminum section frame, 18mm thick WB

plywood, nevy blue Cushion cloth pin etc completed as directed by

Engineer Incharge.

89 Providing and fixing PVC modular kitchen cabinet consisting of 10.000 Sqm 7575.00

base and wall units, made from high quality rigid PVC boards

(minimum 15–18 mm thick), including shutters, shelves, drawers,

SS hinges, telescopic channels, handles, magnetic locks,

necessary fittings, cutting, fixing, complete as per design and

direction of Engineer-in-charge.

90 Providing and fixing foldable MS ladder having 0.90mt wide & 200.000 Kg 110.77

3.60mt long including rod hinge arrangment at middle with ladder

including one coat of red oxide & two coats of oil paint etc

completed as directed by Engineer incharge.

91 Providing and fixing of hook of 10mm or 12mm dia including drilling 4.000 No 303.00

hole, fixing of male- female thrade fastner sealing the same with

appoxy compound, finishing the same etc complete as directed by

Engineer incharge.

92 Providing and fixing medical device & equipment standio meter 4.000 No 1414.00

height measuring scale 2.10mt long including fixing in wall with

using of all heavy SS screw, rail etc complete as directed by

Engineer incharge.

93 Providing and supplying standard PVC (Polyvinyl chloride) Chair 8.000 No 1010.00

with handle of approved design and make as directed by Engineer

94 Providing and supplying standard PVC (Polyvinyl chloride) Stool 8.000 No 606.00

having size 3.75 X 0.60 X 0.45mtr of approved make as directed by

Engineer incharge.

95 Providing & fixing ABC type fire extinguisher 4 kg ISI marked 4.000 No 1515.00

96 Supply, Installation, testing and commissioning of a 32- 4.000 No 15000.00

inch (81cm) diagonal LED Backlit Display Unit, featuring a

minimum resolution of Full HD (1920x1080p), a 16:9

aspect ratio, and a minimum brightness of 250 cd/m² with a

wide 178° viewing angle. The unit must include integrated

stereo speakers (minimum 5W x 2) and multiple input/output

ports, including at least 2 x HDMI, 1 x USB for multimedia

playback, and an audio-out jack. The scope includes a heavy-

duty wall-mount bracket or table top stand, a functional remote

control, and all necessary cabling (minimum 1.5m HDMI

cable and power cord), ensuring full compatibility with

energy-efficiency standard and a 100-240V power supply. The

quoted rate shall be all-inclusive, covering the cost of the

unit, secure packaging, insurance, and transportation to the

designated site location.

97 Suppliying of graded stone aggregate of following sizes (for W.B.M. 1.200 Cum 442.77

Road)(1) Crushed stone aggregate 40mm to 63mm size.

98 Supplying of coarse clean sharp sand at site. 3.200 Cum 296.20

Dismentled Material Credit Rs. 0 will be deducted from 1 St

Rupees Fifty Five Lakh Thirteen Thousand Six Hundred Fifty Three and Paise Forty Three only

I \ We am \ are willing to carry out the work at ……………………… % above\bellow percent ( Should

be written in figures and words ) of the estimated rate mentioned above. Amount of My \ Our tender works

* Estimated Amount * Estimated Amount

Put to tender Rs…………………… Put to tender Rs……………………

Deduct……..……..% Add……..……..%

In words………………….……………… In words………………….………………

1.The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

2.The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3.GST and Income tax TDS will be deducted at a source while making payments of bills

4.In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item at the rate of input rate mentioned in

all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

Panchayat R.& B. Sub Division Panchayat R.& B. Division