Sorting work with Existing feeder pipe line in ward -19 Jambua water tank.

Name of work: -વોડ ૧૯ ંબુવ ા ટાંકીમા હયાત િફડર નળીકા સાથેસોટ ગ કરવાનું કામ.

Sr No Item Qty Rate Rs. Per Amount

Excavation for pipe line trenches incl. all safety provisions using site

rails and staking excavated stuff up to a lead of 90 mts. Cleaning the

site etc. complete for lifts and strata as specified.

a) 0.0 mt to 1.50 mt. depth 50.00 102.35 Cum

b) 1.50 mt to 3.0 mt depth 50.00 112.70 Cum

(GWSSB SOR 22-23,Sec.B, P.No.32, I.No. 1.A.).

Manufacture Supply & Delivery of Electric Resistance Welded/ Submerged

Arc welded M.S.Pipe having bevelled ends plate or coil conforming to IS-

3589-2001 or its latest revision/amendment including 1/S with Cement motar

lining inside & 25mm thick C.M.(1:2) Guniting outside M. S. Pipe inclusive

of necessary materials , labour, Equipment for following thickness outside

diameter at VMC store or site anywhere in Gujrat State including GST, all

taxes, insurance, transportation, freight charges, octrol, inspection charges

,loading , unloading conveyance to Departmental stores, stacking, contractor's

Overhead charges & profit and labour cess (1%) etc. complete.

457 MM OD, 6.0 mm thk. Plate ( I/S Solvent free liquid Epoxy Lining

Micron)Thick + O/S 25MM Gunniting

Lowering, Laying & Jointing and welding in position, to correct line and

level M.S pipe & Specials with outer gunnintig and inside lining/Epoxy

painting on padestal or chairs up on prepared formation or prepared bedding

in trenches the rates incl bedding in trenches the rates incl conveyance from

store to site of work loading,unloading,joint platering hystrotesting etc.

457 MM OD, 6.0 mm thk. Plate ( I/S Solvent free liquid Epoxy Lining

Micron)Thick + O/S 25MM Gunniting 10.00 634.80 Rmt.

MS Specials plain ended/flange ended Manufacture, supply and

delivery of 80 mm to 300 mm dia Mild steel plain ended/flange ended

specials complete like tee, bend, skew tee etc. as per IS. The delivery

of specials is to be made to VMC store or sites including all taxes,

loading, carting, unloading, stacking, insurance, octroi, inspection

charges etc. complete as per instruction of engineer in charge.

M.S. Specials flanged ends (above 300 mm dia.) 800.00 98.00 kg

(GWSSB SOR 22-23,Sec.A, P.No.11, I.No. 7).

Labour Charge For Fixing of M.S Sections : Labour Charges for

lowering laying, erecting, fixing, various size, of M.S section such as

joints, channels, angles, plates etc. complete with fabrication (Labour

Charges for Fixing M.S specials)

(GWSSB SOR 22-23,Sec.B, P.No.41, I.No. 16). 0.80 13069.75 Mt

WATER SUPPLY PROJECT-GAJRAWADI

Sr No Item Qty Rate Rs. Per Amount

Job work of cutting exiting HS feeder line & connecting with the

proposed 700 mm dia H.S feeder line using necessary H.S./M.S.

specials like flange pieces, gap pieces, Tee, Bends, collars, etc.& HS

reducer, Flange etc. required for the connection including dewatering

and providing and fixing all necessary materials for the job.(As per

A) Connection of exist. 700mm dia CI & prapo. 710 OD dia. HS line.

As per ARC approved Rate

Refilling the pipeline trenches incl. ramming, watering, consolidating

disposal of surplus stuff as directed within a radius of 3 km.

After all deduction 90.00 25.30 Cum

(GWSSB SOR 22-23,Sec.B, P.No.40, I.No. 14)

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or welded

in builtup for all type sections, in framed work, including cutting, hoisting,

fixing in position and applying a priming coat of approved steel primer all

complete as per the structural designs and directions of Engineer in

charge.Column ( 122 x 61 x 3.6mm ) 750.00 126.68 KG

Dewatering by pumping set of required capacity including temporary

platform carting pumping at site and fixing the same in position including all

accessories, and fuel and labour etc. complete.

Brickwork using common burnt clay building brick having crushing

strength not less than 35 kg/sq.cm in foundation and plinth in cement

mortar 1:6 6.02 3981.21 CMT

Providing and casting in situ C.C. in grade M-25 (approx.

corresp. to prop. 1:2:4) (proportions as per mix design or as per

Table 9 of IS456 2000 in masses by weigh batching ) using granite,

quartzite trap metal of size 6 mm to 20 mm for RCC work,

including scaffolding centering, form work, needle vibrated

consolidation, curing comp. up to 6 meter depth or height (excluding

cost of reinforcement and neat finishing) with centering and

shuttering/deshuttering etc. comp. for structure for other than

water retaining. For Thrust Block Flat Bottom slab/floor slab/slab with

shuttering 1.00 9288.55 CMT

Provinding 10 mm thick inside cement plaster in Cement mortar

(1:3) to stone or brick masonary including racking out the joints and

niru or cement finishing etc complete. 20.00 233.58 SQ.MT

Providing and supplying ISI mark CCI D/F Sluice Valves as per

IS:14846 (Latest Edition) of following class and diameter all taxes,

insurance, trarnsportation, freight charges, octroi, inspection charges,

loading, unloadin σ including conveyance to departmental stores,

stacking etc. complete

1) 450 mm dia P.N-1.6 With hand wheel /cap operated (PD type short

WATER SUPPLY PROJECT-GAJRAWADI

Sr No Item Qty Rate Rs. Per Amount

Lowering, laying and jointing following CI/DI D/F sluice valve & Air

valve of following class and diameter including nuts, bolts, and giving

hydraulic testing etc. comp. (GWSSB SOR 22-23, Sec B, P.No.41,

1) 450 mm dia P.No.1.6 with hand wheel / cap operated 1.00 2760.00 NOS

Providing and laying and fixing of 80mm thk (M45 Grade) interlocking

coloured RUBBER MOULD paver block as per selected design and colour

given by Engineer in charge with 75 mm thk sand bed layer, watering,

compacting, paving with compacting by mechanical compacter etc. 75.00 697.10 Sqm

R&B SOR 2024-25 Page NO :130 It NO.14033

Providing and laying controlled cement concrete M.150 for curing complete

excluding cost of formwork and reinforcement for reinforced concrete work

in (A) Foundations, footings,Base of columns

and Mass concrete 75.00 3825.87 Cum.

R&B SOR 24-25 It NO:5.8.1, I. Code 05023AA Pg. No :76

GSB :Providing and laying of good quality material of GSB in proper

line,level and camber (compacted with roller 8-10MT capacity on GSB as per

specification and instruction by engineer incharge. 10.00 1045.00 Cum.

As per approved rate

Providing & laying compacted machine crushed black stone aggregate wet

mix macadam in two layers in the material with water to OMC in mecanically

mix (pug mill) carriage of mix material by tipper to site laying,spreading and

compacting in sub base of compacting power vibrater roller to achive the

desired density (mechanically laid) etc.complete.as per technical specification

MORTH clause-406 10.00 1748.00 Cum.

WATER SUPPLY PROJECT-GAJRAWADI