(A) Electrical General work for "Raising of Existing ML P.F into HL P.F of Halt Station at GBN, SATR, HOD, GPE & DLZ including Improvement/Development of Station Buildings, Sitting Benches, Mini Heds and P.F Toilets under the jurisdiction of ADEN/PRNA". (B) Electrical General work for "Raising of Existing ML & RL PF into HL P.F at RNX, KUB, JAG, KSY, SMH, BTF and JBN under ADEN/PRNA Jurisdiction".

A-Electrical General work for "Raising of Existing ML P.F into HL P.F of

B-Electrical General work for "Raising of Existing ML & RL PF into HL P.F

Supply, wiring, testing & commissioning of FL Numbers point/ Lamp point/Fan point (loop wiring) with angular/ batten holder by FR PVC insulated and unsheathed single core, 1.5 sq mm multistranded copper cable to be drawn through rigid PVC conduit pipe not less than 20 mm dia medium gauge including bends, joints etc. from main line under PP shed and 1 sq mm single core FR PVC insulated and unsheathed copper wire for earth continuity without controlling switch under PP shed/FOB as per instruction of Engineer incharge at site.

Supply, wiring, testing & commissioning of Numbers concealed point wiring by FR PVC insulated and unsheathed 1.5 sq mm, single core multi strand copper wire with earth continuity wire by PVC insulated and unsheathed 1 sq mm , single core multi strand copper wire concealed on wall through PVC rigid conduit pipe of dia not less than 20 mm dia heavy duty including all types of joints and bends as required, complete with 6 amps flush type controlling modular switch to be mounted on modular GI inner plate and modular mounting frame of suitable module as per requirement complete to be concealed in wall as per instruction of Engineer Incharge at site. Existing wall should be cut and re-mended to original finish by contractor's own material. (a) FL Point/LED Tube Point/LED Recess Light Point with c/rose

(b) Lamp Point with angle holder

(c) Fan point with c/rose and 5 step fan Numbers regulator 2 M

(d) Exhaust fan point with c/rose

(e) Plug point 6 amps on board complete

Supply, wiring, testing & commissioning of Numbers c o n c e a l e d plug point on separate board complete with 2 x 6 Amp modular socket and 6/10 amps modular switch to be mounted on modular GI inner plate 6M and 6M modular mounting frame with GI box to be concealed in wall as per instruction of Engineer Incharge at site. Existing wall should be cut and re-mended to original finish by contractor's own material.

Supply, wiring, testing & commissioning of Numbers concealed 6/16 amps power plug point on separate board complete with modular 16 amps switch (with indicator) and 6/16 amps 3 pin combined shuttered socket to be mounted on modular GI inner plate 4M or suitable size with modular mounting frame to be concealed in wall as per instruction of Engineer Incharge at Site.

Supply, wiring, testing & commissioning of Numbers mobile charging point complete with 3 nos 6 A flush type controlling switch and 3 nos 6 amps, 5-pin socket and 1 no MCB DP 10 amps fitted on separate half flush MS board with hylem sheet top including provision of painted MS tray of size (8 x 6) inch for mobile holding as per instruction of Engineer incharge at site.

Supply, fixing, connection & testing of 40 Watt Numbers LED Tubelight, Surface/ Pendent mounting LED Battens in Extruded aluminium housing as per instruction of Engineer Incharge at Site.

Supply, fixing & testing and commissioning of Numbers LED 12 W B22 CDL INVERTER BULB V2 as per instruction of Engineer Incharge at Site. KATIHAR DIVISION-ELECTRICAL/N F RLY

Fixing, testing & commissioning of ceiling fan Numbers with supply & fixing of MS clamp with hook, nut, bolt, washer etc. as per instruction of Engineer incharge at site. (Fan will be supplied by Railway)

Supply, installation, testing & commissioning of Numbers 300 mm sweep (metallic) heavy duty exhaust fan, 1400 RPM complete with fixing on wall by suitable size bolts & nuts grouted on wall as per instruction of Engineer incharge at site.

Supply, wiring & testing of main wire by 2.5 sq Metre mm, Single Core FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volts and earth continuity wire by 1.0 sq mm FR-LSH PVC Insulated Industrial Grade Copper Conductor Conforming to IS: 694 concealed in wall through PVC rigid conduit pipe not less than 20 mm dia as per instruction of Engineer incharge at site.

Supply, wiring & testing of main wire by 4 sq Metre mm, Single Core FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volts and earth continuity wire by 1.0 sq mm FR-LSH PVC Insulated Industrial Grade Copper Conductor Conforming to IS: 694 concealed in wall through PVC rigid conduit pipe not less than 20 mm dia as per instruction of Engineer incharge at site.

Supply, wiring & testing of main wire by 6 sq Metre mm, Single Core FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volts and earth continuity wire by 1.0 sq mm FR-LSH PVC Insulated Industrial Grade Copper Conductor Conforming to IS: 694 through PVC rigid conduit pipe/polythene pipe not less than 20 mm dia as per instruction of Engineer incharge at site.

Supply, installation, testing & commissioning of Numbers modular power unit complete with 32 Amp mini MCB DP "C" series 3kA , 25 amps starter, 25 Amp Socket and 25 Amp plug to be mounted on 6 module GI box, 6 module combined plate concealed on wall and wiring by 6 sq mm, Single Core FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible Cables, 1100 Volts with earth coninuity wire by 1 sq mm copper cable Conforming to IS: 694 to be drawn through Rigid PVC conduit pipe not less than 20 mm dia as per instruction of Engineer incharge at site.

Supply, installation, testing & commissioning of Numbers Inverter Split Air Conditioners 1.5 Ton, (BEE star raying-5 star, Coil material-Copper, Echo- friendly refrigerant, Nominal cooling capacity in Ton / (kcal/hr)-1.5 Ton / 4500 kcal/hr) with all accessories as per OEM suitable for operation on 230V AC ,single phase, 50 Hz as per instruction of Engineer incharge at site. Re- mending work should be done after installation of RAC. (with 1 pair outdoor wall stand) (Industrial AC/Heavyduty AC)

Supply, installation, testing and commissioning Numbers of 7 KVA HONDA POWER Petrol start, Petrol run Power Generators And Portable Generators, Model-HONDA EU70is as per instruction of Engineer Incharge at Site. KATIHAR DIVISION-ELECTRICAL/N F RLY

Supply, installation, testing & commissioning of Numbers Pure Sine Wave 2400 VA Inverter with Integrated 2560 WH LiFePO4 Lithium-Ion Battery as per instruction of Engineer Incharge at Site.

U p r o o t i n g / D i s m a n t l i n g of Pole/Tubular Pole/Octagonal Pole without damaging the pole by excavation of earth & refilling of the excavated place with soil as per instruction of Engineer incharge at site.

Loading, unloading and Carrying of HT/LT Rail Numbers Pole/Tubular Pole/Octagonal Pole from site to SSE's store by contractor own arrangement.

Supply & testing of GI octagonal pole 6 mt long Numbers with foundation bolt, loop box of bakelite sheet with one 6A SP MCB and 16 sq mm stud type connector etc. The octagonal pole shall be hot dip galvanized in single dip. Technical specification of pole as following:- Height - 6 mt Top dia (A/F) - 70 mm Bottom dia (A/F) - 130 mm Sheet thickness - 3 mm Base plate (L x B x T) - (200 x 200 x 12) mm Foundation Bolt size (no.x dia) - 4 x 20 dia mm Pitch Circle Dia (PCD) - 200 mm Bolt length - 600 mm Projected Bolt Length - 100 mm .

Supply & fixing of 1 mtr GI Single arm bracket Numbers (header) and holder with Nut & bolt as per instruction of Engineer incharge at site.

Erection of Rail/Tubular/Octagonal pole to 1/5 th Numbers of its height with CC foundation from base block (30 cm x 30 cm x 15 cm) including digging & refilling of earth to a height of 30 cm above ground level as per drawing no.CEE/OH@47'40@FGA) in ratio 1:3:6 by cement sand & Chips 19 mm & down including excavation of earth.

Supply, installation, testing & commissioning of Numbers 90 Watt LED street light with pressure die-cast housing and toughened glass and individual LEDs with secondary lens optics for City Road application withIP66 ingress protection. 4kV inbuilt and 10kV external surge protecton with Top opening driver cover for easy maintenance as per instruction of Engineer incharge at site.

Supply, testing & fixing of LED Rope Light 50 Numbers Meters (Red, Yellow, Blue, Green, White as required) Waterproof, IP 65 or above as per instruction of Engineer Incharge at Site.

Supply, installation, testing & commissioning of Numbers 200 watt LED flood light luminaires complete with pressure die cast aluminium housing, IP 66, Luminous efficacy >= 120 lm/watt with heat sink feature, surge protection etc including wire connection as per instruction of Engineer incharge at site. KATIHAR DIVISION-ELECTRICAL/N F RLY

Supply, installation, commissioning & testing of Square LED indication station name board (Length of Foot board will be as per proportion of letter so that all the 4 side of the board will have extra space) with channel letters with 3.75 ft. in lenght with suitable widen and 4 mm projection size which inside ACP board (Brand- ALUDECOR, category- AL 33 series exterior & thikness-3 mm) with acrylic face on front and having Sumsung 5630 LED's (Shape- Lens type, operating voltage- 12 V DC, carring current-80 mA, power Dissipation- 0.96 watt, working hours-50000, case material- ABS ,protection-IP68) inside for illumination letters in English, Hindi, Bengali or regional language complete with all materials including provision of erection structure made of MS angle/channel/flat duly painted with aluminium paint over a coat of red oxide primer with CC foundation (1:3:6) of cement, sand and stone chips as required at site and as per instruction of Egnineer incharge at site.

Design, manufacture, display of wall /hanging / Square floor mounting type LED illuminated sign / Foot direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 mm thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (Signage Board should as per Railway Board Letter No. 2023/SD-II/22/07/02 Date. 15.05.2023)

Erection and installation of wall / hanging / floor Square mounting type LED illuminated sign / direction Foot boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text/graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric calendered vinyl of 70 mm thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. (Signage Board should as per Railway Board Letter No. 2023/SD-II/22/07/02 Date. 15.05.2023) KATIHAR DIVISION-ELECTRICAL/N F RLY

Supply, erection, testing & commissioning of 11 Set kV lightning arrestor polymer type with all accessories. Lighting arrestor must conform to IEC-60099-4 IS: 3070 (Part-III) (3 no in a set) as per instruction of Engineer incharge at site.

Supply, installation, testing & commissioning of Numbers poly carbonate/Thermoplastic cable cable junction box of size (155 x 210 x 92) mm with IP 67 grade protection with metric knock out with terminals as per instruction of Engineer incharge at site.

Supply, fixing, testing & commissioning of IP Numbers 66/67 thermoplastic cable junction box / loop box of size (210 x 310 x 116) mm with knockouts & 04 nos terminals as per instruction of Engineer incharge at site.

Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers long (3.6 mm thickness) GI pipe, 32x6 mm GI strip- 5 Mtrs, GI nuts, bolts including masonry materials for earthing pit, salt, charcoal, soldered end terminal etc. and construction of earth pit covered with RCC cover slab12.7 mm thickness and watering pipe as per Drg. No.- PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and as per instruction of Engineer Incharge at site.

(a) Supply, installation, testing & commissioning Set of oudoor type weather proof sheded feeder pillar box of suitable size made of powder coated 14 SWG MS/CRCA sheet, angle, flat etc. The feeder pillar box four legs should be grounted on CC foundation (1:3:6). Cable entry should have PVC glands. Feeder pillar box should have double door system with locking arrangement with fixing of rubber gasket for protection of entry of dust and water alongwith supply and fixing of following MCCB as per instruction of Engineer Incharge at site.

(b) MCCB FP 200 amps, 25 kA, Ics=100% Icu

(c) MCCB FP 125 amps, 36 kA, Ics=100% Icu

(d) MCCB FP 63 amps, 25 kA, Ics=100% Icu

(e) Copper bus bar 200 amps made of Set electrolytic grade copper consisting of 4 bars ( 3 Ph and Neutral ) ( Bus bar should have insulation cover)

Laying, commissioning & testing of HT/LT Metre XLPE/PVC cable of different sizes partly along the pole and partly through ground in cable trench by excavation of ground below 1.5 mt from ground level with suitable fixing arrangement by MS clamp of size 50x6 mm and suitable size nut, bolt. Loading, Unloading & Carrying of cable to actual work site by contractor's own arrangement. (Aluminium Crimping Socket should be provided for each Cable Termination). (Cable will be supplied by Railway)

Cable Trench Cutting of LT XLPE insulated Metre armoured, aluminium conductor cable, making good the damages, end terminations with aluminium crimping socket/plugs, provisions of cable route markers, testing & commissioning etc. as required as per technical specifications of different size armoured cable as per instruction of Engineer Incharge at Site. KATIHAR DIVISION-ELECTRICAL/N F RLY

Supply and spreading of gravel/ballast in the cum swithing yard as per instruction of Engineer incharge at site. (Removal and cleaning of existing gravels and thereafter new gravels should be filled if any) (Outdoor switch-yard areas are usually covered with about 10 cm of gravel of crushed rock of 40 mm size)

Supply and repainting of Power supply assets Sqm like GI structure, Fencing panels, fencing uprights, barbed wires, SWS and tubular poles at sub-station with aluminium paint as per site requirement as per instruction of Engineer Incharge at Site. Total 15729595.00 Schedule B-Electrical General work for "Raising of Existing ML & RL PF into HL P.F at RNX, KUB, JAG,

KSY, SMH, BTF and JBN under ADEN/PRNA Jurisdiction".

Item- 1 Please see item breakup for details.

S No. Item Description of Item Unit Qty Rate Amount

1 1 Supply, wiring, testing & commissioning of FL Numbers 500.00 184.00 92000.00

point/ Lamp point/Fan point (loop wiring) with

angular/ batten holder by FR PVC insulated and

unsheathed single core, 1.5 sq mm

multistranded copper cable to be drawn

through rigid PVC conduit pipe not less than 20

mm dia medium gauge including bends, joints

etc. from main line under PP shed and 1 sq mm

single core FR PVC insulated and unsheathed

copper wire for earth continuity without

controlling switch under PP shed/FOB as per

instruction of Engineer incharge at site.

2 2 Supply, fixing, connection, testing & Numbers 500.00 4503.00 2251500.00

commissioning of Surface/Suspended mounted

LED Trunking Batten 40 watt, extruded

aluminum housing provided for efficient heat

dissipation with polycarbonate diffuser & Built-

In electronic driver. IP 54, CRI >=80, THD(%)

<=10, CCT. 6500 K Power Factor 0.95,

Operating temperature: -10 C to +50 C,

Operating voltage range: 165 V - 270 V,

Average life 50000 hours, LED lumen efficacy

145 lm/W with a viewing angle of 120, Powered

by built-in electronic driver (SMPS based

constant current supply) with Output

Open/Short-circuit, Thermal fold back, 440V 8

Hrs protection, Surge protection 4 KV & others

safety test as per IS:15885 Part 2/Sec 13.

ACETRUNKINGADVS40WLED865PSYMBOPCWHT.

3 3 Supply, wiring, testing & commissioning of Numbers 420.00 797.00 334740.00

concealed point wiring by FR PVC insulated and

unsheathed 1.5 sq mm, single core multi strand

copper wire with earth continuity wire by PVC

insulated and unsheathed 1 sq mm , single core

multi strand copper wire concealed on wall

through PVC rigid conduit pipe of dia not less

than 20 mm dia heavy duty including all types

of joints and bends as required, complete with 6

amps flush type controlling modular switch to

be mounted on modular GI inner plate and

modular mounting frame of suitable module as

per requirement complete to be concealed in

wall as per instruction of Engineer Incharge at

site. Existing wall should be cut and re-mended

to original finish by contractor's own material.

(a) FL Point/LED Tube Point/LED Recess Light

Point with c/rose

KATIHAR DIVISION-ELECTRICAL/N F RLY

5 5 (c) Fan point with c/rose and 5 step fan Numbers 77.00 1450.00 111650.00

7 7 (e) Plug point 6 amps on board complete Numbers 98.00 361.00 35378.00

8 8 Supply, wiring, testing & commissioning of Numbers 77.00 737.00 56749.00

c o n c e a l e d plug point on separate board

complete with 2 x 6 Amp modular socket and

6/10 amps modular switch to be mounted on

modular GI inner plate 6M and 6M modular

mounting frame with GI box to be concealed in

wall as per instruction of Engineer Incharge at

site. Existing wall should be cut and re-mended

to original finish by contractor's own material.

9 9 Supply, wiring, testing & commissioning of Numbers 77.00 855.00 65835.00

concealed 6/16 amps power plug point on

separate board complete with modular 16 amps

switch (with indicator) and 6/16 amps 3 pin

combined shuttered socket to be mounted on

modular GI inner plate 4M or suitable size with

modular mounting frame to be concealed in wall

as per instruction of Engineer Incharge at Site.

10 10 Supply, wiring, testing & commissioning of Numbers 77.00 231.00 17787.00

mobile charging point complete with 3 nos 6 A

flush type controlling switch and 3 nos 6 amps,

5-pin socket and 1 no MCB DP 10 amps fitted

on separate half flush MS board with hylem

sheet top including provision of painted MS tray

of size (8 x 6) inch for mobile holding as per

instruction of Engineer incharge at site.

11 11 Supply, fixing, connection & testing of 40 Watt Numbers 500.00 1676.00 838000.00

LED Tubelight, Surface/ Pendent mounting LED

Battens in Extruded aluminium housing as per

instruction of Engineer Incharge at Site.

12 12 Supply, fixing & testing and commissioning of Numbers 200.00 670.00 134000.00

LED 12 W B22 CDL INVERTER BULB V2 as per

instruction of Engineer Incharge at Site.

13 13 Fixing, testing & commissioning of ceiling fan Numbers 40.00 46.00 1840.00

with supply & fixing of MS clamp with hook, nut,

bolt, washer etc. as per instruction of Engineer

incharge at site. (Fan will be supplied by

14 14 Supply, installation, testing & commissioning of Numbers 30.00 2824.00 84720.00

300 mm sweep (metallic) heavy duty exhaust

fan, 1400 RPM complete with fixing on wall by

suitable size bolts & nuts grouted on wall as per

instruction of Engineer incharge at site.

15 15 Supply, wiring & testing of main wire by 2.5 sq Metre 8050.00 75.00 603750.00

mm, Single Core FR-LSH PVC Insulated

Industrial Grade Copper Conductor

(Unsheathed) Flexible Cables, 1100 Volts and

earth continuity wire by 1.0 sq mm FR-LSH PVC

Insulated Industrial Grade Copper Conductor

Conforming to IS: 694 concealed in wall through

PVC rigid conduit pipe not less than 20 mm dia

as per instruction of Engineer incharge at site.

16 16 Supply, wiring & testing of main wire by 4 sq Metre 6020.00 87.00 523740.00

mm, Single Core FR-LSH PVC Insulated

Industrial Grade Copper Conductor

(Unsheathed) Flexible Cables, 1100 Volts and

earth continuity wire by 1.0 sq mm FR-LSH PVC

Insulated Industrial Grade Copper Conductor

Conforming to IS: 694 concealed in wall through

PVC rigid conduit pipe not less than 20 mm dia

as per instruction of Engineer incharge at site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

17 17 Supply, wiring & testing of main wire by 6 sq Metre 3010.00 100.00 301000.00

mm, Single Core FR-LSH PVC Insulated

Industrial Grade Copper Conductor

(Unsheathed) Flexible Cables, 1100 Volts and

earth continuity wire by 1.0 sq mm FR-LSH PVC

Insulated Industrial Grade Copper Conductor

Conforming to IS: 694 through PVC rigid conduit

pipe/polythene pipe not less than 20 mm dia as

per instruction of Engineer incharge at site.

18 18 Supply, installation, testing & commissioning of Numbers 15.00 1193.00 17895.00

modular power unit complete with 32 Amp mini

MCB DP "C" series 3kA , 25 amps starter, 25

Amp Socket and 25 Amp plug to be mounted on

6 module GI box, 6 module combined plate

concealed on wall and wiring by 6 sq mm,

Single Core FR-LSH PVC Insulated Industrial

Grade Copper Conductor (Unsheathed) Flexible

Cables, 1100 Volts with earth coninuity wire by

1 sq mm copper cable Conforming to IS: 694 to

be drawn through Rigid PVC conduit pipe not

less than 20 mm dia as per instruction of

Engineer incharge at site.

19 19 Supply, installation, testing & commissioning of Numbers 15.00 54091.00 811365.00

Inverter Split Air Conditioners 1.5 Ton, (BEE star

raying-5 star, Coil material-Copper, Echo-

friendly refrigerant, Nominal cooling capacity in

Ton / (kcal/hr)-1.5 Ton / 4500 kcal/hr) with all

accessories as per OEM suitable for operation

on 230V AC ,single phase, 50 Hz as per

instruction of Engineer incharge at site. Re-

mending work should be done after installation

of RAC. (with 1 pair outdoor wall stand)

(Industrial AC/Heavyduty AC)

20 20 Supply, installation, testing & commissioning of Numbers 40.00 6632.00 265280.00

Wall Air Circulator Fan (Industrial fan), 600 mm

sweep (Speed- 1440 RPM, Max. wattage-180

Watt, Air delivery > 16000 CMH,

Aerodynamically designed aluminum alloy

single piece blades for high air delivery> 16500

CMH, conforms to IS 2997-1964 standards) with

suitable fixing arrangement on wall as per

instruction of Engineer incharge at site.

21 21 Supply, installation, testing & commissioning of Numbers 3.00 100011.00 300033.00

Aquaguard Institutional Water cooler-cum-

Purifier with Storage Capacity 120 Ltrs. &

Option for Cold & Normal Purified Water. a)

Approx. Dimensions : 750 mm (W) x 570 mm

(D) x 1350 mm (H) b) Power rating : 850 ± 10%

w a t t c) Water flow capacity : 80 LPH

d)Operating power supply : 170-260 VAC, 1 ph

e)No. of stages for filter-cum-purifier : 3 nos. f)

Storage capacity : 120 Ltr g) Nos. of Faucets :

03 nos. h) Body material: Front SS 304 and the

rest in Pre-coated steel i) Refrigerant used:

Freon 22 or latest

22 22 Supply, welding, making & erection of Job 3.00 11043.00 33129.00

fencing/cage of approx size 7 ft x 4.5 ft with

provision of two fold gate with locking

arrangement and leg by providing suitable size

MS angle (50 x 50 x 6 mm), MS flat (25 x 5

mm), MS sheet (1.6 mm thickness), hinges,

aldrops etc. with supply of paint and painting

the whole structure including CC work (1:3:6)

for grouting of four legs as per instruction of

Engineer incharge at site. (For protection of

KATIHAR DIVISION-ELECTRICAL/N F RLY

23 23 Supply, installation, testing and commissioning Numbers 5.00 243360.00 1216800.00

of 7 KVA HONDA POWER Petrol start, Petrol run

Power Generators And Portable Generators,

Model-HONDA EU70is as per instruction of

Engineer Incharge at Site.

24 24 Supply, installation, testing & commissioning of Numbers 25.00 59202.00 1480050.00

Pure Sine Wave 2400 VA Inverter with

Integrated 2560 WH LiFePO4 Lithium-Ion

Battery as per instruction of Engineer Incharge

25 25 U p r o o t i n g / D i s m a n t l i n g of HT/LT Rail Numbers 245.00 405.00 99225.00

Pole/Tubular Pole/Octagonal Pole without

damaging the pole by excavation of earth &

refilling of the excavated place with soil as per

instruction of Engineer incharge at site.

26 26 Loading, unloading and Carrying of HT/LT Rail Numbers 200.00 249.00 49800.00

Pole/Tubular Pole/Octagonal Pole from site to

SSE's store by contractor own arrangement.

27 27 Supply & testing of GI octagonal pole 6 mt long Numbers 60.00 14193.00 851580.00

with foundation bolt, loop box of bakelite sheet

with one 6A SP MCB and 16 sq mm stud type

connector etc. The octagonal pole shall be hot

dip galvanized in single dip. Technical

specification of pole as following:- Height - 6 mt

Top dia (A/F) - 70 mm Bottom dia (A/F) - 130

mm Sheet thickness - 3 mm Base plate (L x B x

T) - (200 x 200 x 12) mm Foundation Bolt size

(no.x dia) - 4 x 20 dia mm Pitch Circle Dia (PCD)

- 200 mm Bolt length - 600 mm Projected Bolt

Length - 100 mm .

28 28 Supply & fixing of 1 mtr GI Single arm bracket Numbers 60.00 1615.00 96900.00

(header) and holder with Nut & bolt as per

instruction of Engineer incharge at site.

29 29 Erection of Rail/Tubular/Octagonal pole to 1/5 th Numbers 60.00 1712.00 102720.00

of its height with CC foundation from base block

(30 cm x 30 cm x 15 cm) including digging &

refilling of earth to a height of 30 cm above

ground level as per drawing

no.CEE/OH@47'40@FGA) in ratio 1:3:6 by

cement sand & Chips 19 mm & down including

excavation of earth.

30 30 Supply, installation, testing & commissioning of Numbers 120.00 8823.00 1058760.00

90 Watt LED street light with pressure die-cast

housing and toughened glass and individual

LEDs with secondary lens optics for City Road

application withIP66 ingress protection. 4kV

inbuilt and 10kV external surge protecton with

Top opening driver cover for easy maintenance

as per instruction of Engineer incharge at site.

31 31 Supply, testing & fixing of LED Rope Light 50 Numbers 200.00 7237.00 1447400.00

Meters (Red, Yellow, Blue, Green, White as

required) Waterproof, IP 65 or above as per

instruction of Engineer Incharge at Site.

KATIHAR DIVISION-ELECTRICAL/N F RLY

32 32 Supply, installation, commissioning & testing of Square 210.00 1772.00 372120.00

LED indication station name board (Length of Foot

board will be as per proportion of letter so that

all the 4 side of the board will have extra space)

with channel letters with 3.75 ft. in lenght with

suitable widen and 4 mm projection size which

inside ACP board (Brand- ALUDECOR, category-

AL 33 series exterior & thikness-3 mm) with

acrylic face on front and having Sumsung 5630

LED's (Shape- Lens type, operating voltage- 12

V DC, carring current-80 mA, power Dissipation-

0.96 watt, working hours-50000, case material-

ABS ,protection-IP68) inside for illumination

letters in English, Hindi, Bengali or regional

language complete with all materials including

provision of erection structure made of MS

angle/channel/flat duly painted with aluminium

paint over a coat of red oxide primer with CC

foundation (1:3:6) of cement, sand and stone

chips as required at site and as per instruction

of Egnineer incharge at site.

33 33 Design, manufacture, display of wall /hanging / Square 208.00 2868.00 596544.00

floor mounting type LED illuminated sign / Foot

direction boards in half elliptical shape. The

display sheet shall be of unbreakable 040

translucent polycarbonate sheet of 2 mm

thickness. The text / graphics matter visibility

shall not be less than 160 deg. The approved

colour text and graphics shall be printed / router

cut on monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the

integral mounting arrangements with sturdy

structural frame and ACP cladding on the back

side of the signage to avoid rusting and entry of

dust. The LED board shall have uniform

illumination with 4-8 W / sq. ft and with

brightness more than ambient light. Suitable

size end cap of 1.5 mm thick SS 304 should be

provided. (Signage Board should as per Railway

Board Letter No. 2023/SD-II/22/07/02 Date.

34 34 Erection and installation of wall / hanging / floor Square 208.00 287.00 59696.00

mounting type LED illuminated sign / direction Foot

boards in half elliptical shape. The display sheet

shall be of unbreakable 040 translucent

polycarbonate sheet of 2 mm thickness. The

text/graphics matter visibility shall not be less

than 160 deg. The approved colour text and

graphics shall be printed / router cut on

monomeric calendered vinyl of 70 mm

thickness and shall be firmly pasted on display

sheets. The mounting arrangement shall be

hanging, wall mounting, ceiling mounting, pole

mounting or floor mounting and as per site

requirement. The signage shall have the

integral mounting arrangements with sturdy

structural frame and ACP cladding on the back

side of the signage to avoid rusting and entry of

dust. The LED board shall have uniform

illumination with 4-8 W / sq. ft and with

brightness more than ambient light. Suitable

size end cap of 1.5 mm thick SS 304 should be

provided. (Signage Board should as per Railway

Board Letter No. 2023/SD-II/22/07/02 Date.

KATIHAR DIVISION-ELECTRICAL/N F RLY

35 35 Supply, installation, testing & commissioning of Numbers 12.00 7703.00 92436.00

1 HP, 0.75 kW self primimg monoblock pump

motor set complete, suitable for 220 Volt, 50

Hz, 1 phase supply as per instruction of

EngineerIncharge at Site.

36 36 Supply, erection, testing & commissioning of 11 Set 25.00 5174.00 129350.00

kV lightning arrestor polymer type with all

accessories. Lighting arrestor must conform to

IEC-60099-4 IS: 3070 (Part-III) (3 no in a set) as

per instruction of Engineer incharge at site.

37 37 Supply, installation, testing & commissioning of Numbers 140.00 1292.00 180880.00

poly carbonate/Thermoplastic cable cable

junction box of size (155 x 210 x 92) mm with

IP 67 grade protection with metric knock out

with terminals as per instruction of Engineer

incharge at site.

38 38 Supply, fixing, testing & commissioning of IP Numbers 105.00 5291.00 555555.00

66/67 thermoplastic cable junction box / loop

box of size (210 x 310 x 116) mm with

knockouts & 04 nos terminals as per instruction

of Engineer incharge at site.

39 39 Supply & Erection of earth by 50 mm dia 3 Mtrs. Numbers 200.00 4349.00 869800.00

long (3.6 mm thickness) GI pipe, 32x6 mm GI

strip- 5 Mtrs, GI nuts, bolts including masonry

materials for earthing pit, salt, charcoal,

soldered end terminal etc. and construction of

earth pit covered with RCC cover slab12.7 mm

thickness and watering pipe as per Drg. No.-

PCEE/ELG/DRG/2024/1 Date:- 30.09.2024 and

as per instruction of Engineer Incharge at site.

40 40 (a) Supply, installation, testing & commissioning Set 10.00 5070.00 50700.00

of oudoor type weather proof sheded feeder

pillar box of suitable size made of powder

coated 14 SWG MS/CRCA sheet, angle, flat etc.

The feeder pillar box four legs should be

grounted on CC foundation (1:3:6). Cable entry

should have PVC glands. Feeder pillar box

should have double door system with locking

arrangement with fixing of rubber gasket for

protection of entry of dust and water alongwith

supply and fixing of following MCCB as per

instruction of Engineer Incharge at site.

electrolytic grade copper consisting of 4 bars ( 3

Ph and Neutral ) ( Bus bar should have

insulation cover)

45 45 Laying, commissioning & testing of HT/LT Metre 10000.00 55.00 550000.00

XLPE/PVC cable of different sizes partly along

the pole and partly through ground in cable

trench by excavation of ground below 1.5 mt

from ground level with suitable fixing

arrangement by MS clamp of size 50x6 mm and

suitable size nut, bolt. Loading, Unloading &

Carrying of cable to actual work site by

contractor's own arrangement. (Aluminium

Crimping Socket should be provided for each

Cable Termination). (Cable will be supplied by

KATIHAR DIVISION-ELECTRICAL/N F RLY

46 46 Cable Trench Cutting of LT XLPE insulated Metre 10000.00 338.00 3380000.00

armoured, aluminium conductor cable, making

good the damages, end terminations with

aluminium crimping socket/plugs, provisions of

cable route markers, testing & commissioning

etc. as required as per technical specifications

of different size armoured cable as per

instruction of Engineer Incharge at Site.