Special repairs for replacement of CI GI pipe line Arun Khetrapal Enclave and allied area under GE Utility Ambala Cantt

Amount

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed.

Returning, filling in, of soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified and as directed.

Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Taking up/down corroded/unserviceable 150mm bore CI/GI pipes and connection from trenches including connected fittings/accessories and removing unserviceable pipes from site complete all as specified and directed. Note: Excavation and earth work will be measured and paid separately.

Taking up/down corroded/unserviceable 100mm bore CI/GI pipes and connection from trenches including connected fittings/accessories and removing unserviceable pipes from site complete all as specified and directed. Note: Excavation and earth work will be measured and paid separately.

Taking up/down corroded/unserviceable 50mm bore CI/GI pipes and connection from trenches including connected fittings/accessories and removing unserviceable pipes from site complete all as specified and directed. Note: Excavation and earth work will be measured and paid separately.

Taking up/down corroded/unserviceable 25mm bore CI/GI pipes and connection from trenches including connected fittings/accessories and removing unserviceable pipes from site complete all as specified and directed. Note: Excavation and earth work will be measured and paid separately.

Taking up/down corroded/unserviceable 20mm bore CI/GI pipes and connection from trenches including connected fittings/accessories and removing unserviceable pipes from site complete all as specified and directed. Note: Excavation and earth work will be measured and paid separately.

Supply laying, jointing & testing of ductile iron pipe, 150mm bore, S/S, Class K-9, ISI marked, spigot and socketed ends, with push on rubber joints, laid in trenches complete all as specified and directed.

Supply and fixing of ductile iron pipe, 100mm bore, S/S, Class K-9, ISI marked, spigot and socketed ends, with push on rubber joints, laid in trenches complete all as specified and directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 50mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., laid in trenches complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Material and labour for brick masonry valve pit nominal size 120 cm x 120 cm x 120 cm (Internal size) with one brick thick wall using sub class 'B' brick in cement mortar 1:6 over 20 cm thick PCC 1:3:6 type C-1 platform with 15 cm off set on all sides including 50mm thick coping in PCC(1:2:4) type B1 at top of brickwall and plastering of internal surfaces and exposed surfaces with 15 mm thick in cement mortarf 1:4 with 2mm thick openable mild steel sheet cover in two parts welded around to 40x40x5mm angle frame including suitable size holdfasts, hinges etc and locking arrangement and lifting handle with all steel/iron surfaces painted with two coats approved clour synthetic enamel paint complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 40mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., laid in trenches complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., laid in trenches complete all as specified and as directed. Note: Excavation and earth work will be measured and paid separately.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 25mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., fixed on wall or laid in floor complete all as specified and as directed.

Supplying, laying, jointing and testing (including diversion/change of route) for galvanised steel tubing 20mm bore, ISI marked, 'Medium grade' with all fitting such as bends, elbows, tees, short pieces, union, etc., fixed on wall or laid in floor complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 150 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete including taking down old unserviceable sluice valves complete all as specified and as directed.

Supplying and fixing cast iron sluice valve, heavy duty, Class PN 1.6 with flanged ends, 100 mm nominal bore, ISI marked, any pattern with cast iron head wheels and stainless spindle, conforming to IS 14846 of 2000 including jointing material flanged joint rubber/ fibre board gasket 6mm thick nuts, mild steel bolt , washer, etc complete including taking down old unserviceable sluice valves complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally, ISI marked, Class-2, for iron pipe of size 50mm bore including taking down old unserviceable gate valves complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 25mm bore including taking down old unserviceable gate valves complete all as specified and as directed.

Supply and fixing of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally ISI marked, Class-2, for iron pipe of size 20mm bore including taking down old unserviceable gate valves complete all as specified and as directed.

Supply and fixing of PVC float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20mm bore including taking down old unserviceable foot valves complete all as specified and as directed.

Material and labour for rubber gasket (Tyton) joints suitable for 150 mm bore DI pipes and fittings including jointing material complete all as specified and as directed.

Material and labour for rubber gasket (Tyton) joints suitable for 100 mm bore DI pipes and fittings including jointing material complete all as specified and as directed.

Matereial and labour for cast iron/ ductile iron pipe fittings upto 150mm bore for socket and spigot / flanged pipe such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch, `Y` junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregates), as in bed of channel,foundation filling/ channel bedding and mass concrete complete all as specified and directed.

Material and labour for moorum or red bajri filling in damaged road portion including spreading, levelling, well ramming including watering and consolidated to required camber and gradient and rolled using hand roller to match the existing road surface complete all as specified and directed.

Note:- Amount of credit of Rs. 5,31,125.00 for retrieved materials is mentioned in Schedule of Credit Page No. 43R of tender documents in pdf form which will be deducted offline while acceptance of tender.

Gupta Enterprises

Bal Singh and Sons

RAJINDER KUMAR AND ASSOCIATES

Puneet Sharma

Sham Sunder Bansal

SATISH AND CO

SYNDICATE BUILDERS