Construction of Multipurpose Hall at Govt. Industrial Training institute Paplog in Distt. Mandi ( HP )

Amount

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etectera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

In columns, pillars posts and struts square rectangular or polygonal in plan.

In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching below supporting cantilevers girders breasumers and lintels upto any depth /height

Providing and laying in position machine batched and machine mixed and vibrated design mix M-20 (twenty ) grade cement concrete for reinforced cement concrete work,to obtained minium crushing strength of 25N/mm2 (Twenty five ) Netwon per millimetres square) with minium cement contents of 350Kg/Cum (Four hundred twenty five killogramme per Cubic metres) using cement content as per approved design mix, In coloumns pillers , post and struts etc. including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying Reinforced cement concrete mechnically mixed and vibrated in reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (fifteen) Degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement M-20 (M-Twenty) cement concret work obtain minium crushing strenght of 25 N/mm2 ( Twenty three) Newton per millimetre square)with minium cement contents of 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix, upto all floor levels including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and laying tor steel made of TATA/TISCO/ SAIL reinforcement for reinforcement cement concrete work including bending, binding straightning and placing in position complete upto all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Brick work (second class) using common burent clay building bricks in Super structure above plinth level with cement mortar 1:6 (one cement : six coarse sand) curing complete upto all floor levels in all heights/ depth including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in superstructure above plinth level up to all floor levels with Cement Mortar 1:4( One cement: four coarse sand) and curing complete including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 35 mm (Thirty Five Millimeter) thick MDF flush shutter with 1 mm thick lamination on both sides of approved shade in Marino laminates or green ply with edging in frames of 1st class deodar wood for doors including bright finished/ back enamelled iron butt hinges with neccessary screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 250x16mm (two hundred fifty into sixteen millimetres) anodized aluminium sliding door bolts anodized / powder coated colour or shade with bolts and nuts screws etcetera complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals:The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 250 x10 mm (Two hundred fifty into ten ) millimetres aluminium tower bolts (barrel type) anodized/ powder coated transparent or dyed to required shade and colour with screws including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimetres) aluminium handles anodized/ powder coated transparent including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet made of TATA,Durashine in roofing with hot dipped matallic Zinc coated sheet with the top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns 5 (five) micron over five micron's primer coating to back coat of polyster over 5 (five) microns primar coating including fixing with pre painted iron J or L hooks, bolts and nuts 6mm (six milimeters) dia meter with prepainted limpet and rubber washer complete with all accessories as equired as per the direction of Engineer-in Charge upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. he rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing ridges or hips with proper gola 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets made of TATA/Durashine Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing MS BP Sheet 1.66 to 2.00 (One point sixty six to two ) millimetres thick of TATA Dura shine make in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per direction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) upto all floor levels in all heights/ depth including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.

Providing and fixing 30(Thirty) millimetres wide 45(forty five) millimetres overall semicircular plain GI sheet gutter with iron brackets 40X 3(forty into three) millimetres size bolts and nutts and washers etc including making necessary connections with rain water pipe complete as per design in 0.80 mm ( Zero point eight zero) millilmetres thick sheetwith zink coating not less than 275gm/ sqm ( Two hundred seventy five gramme per Square metres), including carriage of material up to all leads and lifts and as per direction of Engineer in charge. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Steel work welded in built up sections made of TATA ,in grating, framed guard bars ladders, railing brackets and similar works , including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Structural steel work riveted, bolted or welded in built up sections made of TATA, Trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. upto all floor level in all heights complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing 110 mm ( one hundred ten millimetre )dia on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme, AKG, Finolex, Prince, Kisan, SFMC, Diplast conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten milimetre) gap for thermal expansion complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of royality, GST or other taxes imposed by the Government.including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals.

110 mm ( one hundred ten millimetre) plain bend

110mm ( one hundred ten millimetre)dia P.V.C. shoe

Providing and fixing 110mm dia (one hundred ten millimetres)PVC clamps ISI marked of Finolex Supreme, AKG, Prince, Kisan, SFMC, Diplast make of approved design with steel screws and rawal plugs etc. Complete upto all floor level including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Providing and fixing standred steel section of M.S. angle and flat iron (TATA/SAIL make) for doors , Windows and clerestory window frames manufactured from M.S.Angle iron section 40X40X5 (Forty into Forty into five ) millimetres and MS plate 50 x 4 ( Fifty into four) millimetres including hinges jamb, lock jamb,beed and if required angle thrashold of mild steel angle 50X25 (Fifty into twenty five) millimetres welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 (two point five) millimetres thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Providing and fixing standared steel section door, window, clerestory window frame manufactured from ISMC Channel section 75X 40 (Seventy five into forty) Millimetres with MS flat 75x4 (Seventy five into four) Millimetres in combination including hinges Jamb, beed, lungs, with with split end tails to each jambs including steel butt hinges 2.5(Two point five) Millimetres thick with provision for locking arrangement and shock observer as specfied and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals .The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Govt.

Ashit Thakur