PROVISION OF FOOTBALL GROUND WITH TURF AT MARRIED ACCOMMODATION PROJECT LAND AT CGAE KOCHI

Amount

Surface dressing not exceeding 15 cm deep in soft/loose soil all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with 8 to 12 Tonne power roller complete all as specified and directed.

Material and Labour for red earth/moorum filling in floors or pavings, laid in layers n exc 15 cm thick spread, levelled and rammed including watering all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil getting out complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

Returning, filling in soil including spreading leveling, watering and well ramming in layers n.exc.25cm thick complete all as specified and as directed.

Removing excavated material / soil to a distance exc 1.5Km and n.exc 5Km and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

S & F 100 mm dia PVC perforated pipe of pressure rating 6 kgf/sq. cm for sub soil drainage complete all as specified and directed.

S & F 150 mm dia PVC perforated pipe of pressure rating 6 kgf/sq. cm for sub soil drainage complete all as specified and directed.

S & F non-woven geotextile fabric 150 GSM manufactured from high quality polypropylene Staple Fibres mechanically bonded through needle -punching to form a strong , flexible and dimensionally stable structure , with optimum pore sizes and high permeability and resistant to chemical and biological organisms normally found in soli and is stabilized against degradation due to exposure to ultravoilet radiation complete all as specified and as directed.

M&L for 40 mm crushed stone aggregate as in base layer with minimum porosity 150mm / hour as per FIFA quality requirement and compacted to minimum 98% dry density laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 20 mm crushed stone aggregate as in base layer with minimum porosity 150mm / hour as per FIFA quality requirement and compacted to minimum 98% dry density laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 12.5 mm crushed stone aggregate as in base layer with minimum porosity 150mm / hour as per FIFA quality requirement and compacted to minimum 98% dry density laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for 0-6 mm crushed stone dust in base layer with minimum porosity 150mm / hour as per FIFA quality requirement and compacted to minimum 98% dry density laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

Material and Labour for providing precast cement concrete type C1, 1:3:6 (20 mm graded stone aggregate) solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Material and labour for Plain Cement concrete in foundations, filling and mass concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floor and other similar type of works, finished even and fair without using extra cement complete all as specified and directed.

Supply and fix structural steel work in tubular trusses and tubular posts including purlins, rafters, special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS - 1161-1979 grade St.-240 and painted with one coat of zinc chromate primer paint including preparation of surfaces at contractors workshop before fabrication all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over one coat of zinc chromate primer on new steel surfaces over 10 cm wide or girth including preparation of surface etc., complete all as specified and directed.

S & F side net Garware brand black colour braided net with 2.5 mm thickness HDPE twine and 50 mm mesh size, heat treated machine made knotting, weather resistant and non degradable due to exposure to environmental conditions complete all as specified and as directed.

Providing and laying turf of FIFA quality with pile height of minimum 50 mm, gauge of 5/8 inch, stitch rate of 5/10 cm +/- 3%, backing of double PP + Mesh + Green SBR Latex, Yarn type 100% polythelene (D shape with UV resistance), FIFA quality, white lines with white grass 14/10 cm stitch 50 mm pile height, jointed with 30 cm non woven seaming tape, adhesives of Envirostik PU, mapie ultra bond, fevicol, silica sand and rubber granules 1-4 mm complete all as specified and as directed.

Removing excavated soil and depositing to the sides and returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft/loose soil after cable is laid complete all as specified.

M&L for providing dry screened river sand as in sand cushioning to under ground cable including punning down of sand by layer complete all as specified and as directed. NOTE: Punned thickness shall be measured and paid.

Supply and lay unreinforced precast cable cover size 250X150X40 mm LV1 complete all as specified and as directed.

Supply and lay cable LT, XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of following sizes fixed in wall/ roof or laying in trenches etc., 10 Sqmm 4 core, 1100 Volts grade, 415 v, 50 Hz including taking out old one complete all as specified and as directed.

Supply and Fix 32 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed to walls, ceilings or laid in trenches, floors etc for cable protection including clamps, nut, bolt and washers etc complete all as specified and as directed.

Supply and Fixing MCB TPN 415 Volts, 50Hz, 3 phase of capacity 63 Amps, C curve 10 KA breaking capacity, fixed properly in DB and connecting/testing complete all as specified and as directed.

Supply and fix hot pressed moulded SMC junction/terminal box of internal diemension of 150x150x100 mm and hinged door,including 01 No 4 way connector 415 Volt, 63 Amp, made out of polycorbanate or bakelite and 1 No. MCB of 6 to 32 Amp with DIN bar,drilling holes for cable connections connecting incomming and or out going cables by providing cable luggs/glands of suitable size fixed on pole by means of clamps made out of MS flat iron of suitable sizes,duly painted with two coats of red oxide zince primer complete including 3 rum of 2.5sqmm unsheathed FRLS copper conductor and PVC conduit and from terminal box to flood light (Aprox 8 meter) all as specifiedand directed. Make : Sintex/L&T/Havells or equivalent

Supply and fix LED flood light fitting 210W energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65/66, 10KV SPD, more than 100lm/watt flood light with high power LEDs as light source, suitable for highlighting architectural facade highmast and general purpose lighting complete all as specified and as directed. Make: Havells/ Crompton Greaves/Philips.

Supply and errect steel tubular swaged poles 410 SP – 55, 9 meter long, conforming to IS 2713-1980 and MS tubing as per IS-1161, brought in two pieces welded at site complete with cast iron base plate, finial taper plug, bolts, nuts and screws including two coat of aluminium paint over a coat of primer all as specified and as directed.

AB CONSTRUCTIONS (BID ID -3268662)

M-TECH ENGINEERS (BID ID -3270464)

SHAIJAL T M (BID ID -3271333)

SOORYA ASSOCIATES (BID ID -3271273)