REFURBISHMENT OF EXISTING SARDAR PATEL SMRUTI BHAVAN AUDITORIUM AT T.P.S. NO.: 4 (ASHWINIKUMAR- NAVAGAM), F.P. NO.: M/3. IN EAST (VARACHHA) ZONE – A (2ND ATTEMPT)

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

PART 01: BUILDING CIVIL & REPAIR PART

SUB PART A:- RCC WORKS

WORK UP TO PLINTH

Excavation for foundation including sorting out and stacking

off useful materials and disposing of the excavated stuff up to

50 mt. lead and all lift, watering- Dewatering etc.comp.

loose or soft soil (With Manual Labour)

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles) &

disposal of the surplus excavated soil as directed within a lead of

M. For following diameter of piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

agg. 20 mm nominal size)& curing comp. Includ.cost of form

work but exclu.

Cost of reinforcement for reinforced concrete work in :

4 5 (A) Foundation and plinth 71.00 ₹ 3,637.34 C.M. ₹

Providing & laying C.C 1:2:4 (1cement :2 coarse sand :4

crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

5 8-A cost of from work in: wall caps / copings. 7.00 ₹ 3,982.62 C.M. ₹

Providing & laying Granular sub base (GSB) confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and

laid with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 / Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. :

(A) foundation, footing, base of columns and mass

concrete 18.00 ₹ 4,180.62 C.M. ₹

( A ) Column: (From Footing to GB)

(3) Having cross sectional area more than 0.12 sq. mt 6.00 ₹ 9,190.79 C.M. ₹

( B ) Beam (Ground Beam)

(3) Having cross sectional area more than 0.12 sq. mt . 25.00 ₹ 6,999.09 C.M. ₹

(G) Vertical and horizontal fins / RCC Pardi

7 6- A Any thickness 1.00 ₹ 9,030.72 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

for R.C.C. work

incl. bending, binding & placing in position etc. comp. Upto

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)

9 18 (C) Fly Ash Bricks

Filling available excavated earth excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited

10 12 layer by ramming and watering. 524.00 ₹ 130.39 C.M. ₹

Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

11 13 consolidating etc. complete. 100.00 ₹ 289.06 C.M. ₹

Providing and laying 200 micron plastic sheet on prepared sub base

12 102 For V.D.S Concrete or to any concrete base. 400.00 ₹ 26.00 C.M. ₹

Carring out plinth treatment to post construction / existing

13 15 structure by spraying chemical solution, Injecting in Flooring - wall 7950.00 ₹ 116.00 S.M. ₹

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

coat of C.M. 1:1 (1cement: 1 sand) apply thick cement slurry and

SMC- apply roller horizontal aswell as vartical ( two times ) up to good

SOR.N quality and size of grain in elevation as per directed by engineer

14 O-28 incharge.Excluding GST

Providing & applying two coats of weather shield max paint (3

15 17 coats may be required in case of darker colours.)of ICI Dulux or 150.00 ₹ 82.00 S.M. ₹

WORK ABOVE PLINTH LEVEL

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 / Design mix concrete as per IS 456:2000

(latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost of

reinforcement. :

(3) Having cross sectional area more than 0.12 sq. mt

Ground Floor 9.00 ₹ 9,190.79 C.M. ₹

First Floor 8.00 ₹ 9,230.39 C.M. ₹

Second floor ( terrace floor lvl 6.4m level ) 3.00 ₹ 9,269.99 C.M. ₹

(3) Having cross sectional area more than 0.12 sq. mt

Ground Floor 13.00 ₹ 6,999.09 C.M. ₹

(3) Slab having more than 10C.M. & up to 13C.M. thickness

Ground Floor 23.00 ₹ 6,727.93 C.M. ₹

First Floor 0.00 ₹ 6,767.53 C.M. ₹

Second floor 4.00 ₹ 6,807.13 C.M. ₹

Ground Floor(level 3.67) 1.00 ₹ 6,913.25 C.M. ₹

First floor 1.00 ₹ 6,952.85 C.M. ₹

Second floor 1.00 ₹ 6,992.45 C.M. ₹

Ground floor 10.20 ₹ 9,419.25 C.M. ₹

First floor 5.10 ₹ 9,458.85 C.M. ₹

Second floor 0.00 ₹ 9,498.45 C.M. ₹

Providing and laying cement concrete 1: 4: 8 (1 cement :

4coarse sand :8 graded stone aggregates 40 mm nominal

size) and curing complete excluding cost of formwork in

17 4 (A) Foundation and Plinth 0.00 ₹ 2,680.21 C.M. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

reinforcement for R.C.C. work incl. bending, binding &

placing in position etc. comp. Upto G.L./P.L.

Ground floor 8050.00 ₹ 76.21 Kg. ₹

First floor 5200.00 ₹ 77.21 Kg. ₹

Second Floor (Terrace Floor) 3650.00 ₹ 78.21 Kg. ₹

18 10 3rd Floor (Staircabin Top Floor) 350.00 ₹ 78.21 Kg. ₹

PART B :- DISMANTLING WORK

Demolishing Brick work and stone masonry incl. including

stacking of serviceable material and disposal of

Self unserviceable material with all lead and lift.

Explai At any height including Props & Scafolding.

19 ned (ii) In cement mortar 216.00 ₹ 550.40 C.M. ₹

Removing the scraping of old deteriosted plaster of any

thickness form wall/R.C.C. member including strcking of

serviceable material and disposal of unserviceable material

Self from site of work with all lead and lift.and note plaster

Explai scraping with wide chisal only.

20 ned At any height including Props & Scafolding. 4832.00 ₹ 19.57 S.M. ₹

Demolition including stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift. At

Self any height including Props & Scafolding.

Explai At any height including Props & Scafolding.

21 ned 1.) R.C.C work / PCC Work 26.00 ₹ 1,057.47 C.M. ₹

Demolition of terrace including stacking of serviceable

materials and disposal of unserviceable materials with all

lead and lift.'

Self 1.) Brick tile covering water proofing up to any thickness

Explai and naket slab consider

22 ned At any height including Props & Scafolding. 150.00 ₹ 42.42 S.M. ₹

Dismantling C.I. Pipes, G.S.W. Pipes and A.C.,PVC rain

Self water pipes or SWR with fittings and clamps including

Explai stacking the materials with all lead & lift (For any Dia. of

Dismantling of sheet roofing including ridges

Self hips,valleys,gutters etc. staking of serviceable materials and

Explai disposal of unserviceable materials with all lead and lift. (i)

24 ned G.I sheet roofing 51.00 ₹ 47.72 S.M. ₹

Dismantling Doors, Windows, Ventilators etc. (wood or

steel) shutters including chowkhats, architreaves, holdfasts,

Self and other attachment etc. complete and stacking them within

Explai all lead and lift.

25 ned (1) Not exceeding 3 sq. meters in area . 40.00 ₹ 187.71 EACH ₹

Dismentaling of Tiles floors laid in mortar including

Self stacking of serviceable material and disposal of

Explai unserviceable material with all lead and lift.

26 ned At any height / levels. 750.00 ₹ 47.72 S.M. ₹

Removing dry or oil bound distemper / weathershield /

plastic paints by a washing and scraping and sand papering

the wall surface smooth including necessary repairs to

Self scratches complete. (All type of inside/outside color with all

Explai lead and lift, for all floor levels, including propping,

27 ned scafolding, etc...) 10980.00 ₹ 11.30 S.M. ₹

28 ned Dismantling / Removing of Collapsible Gate. 4.00 ₹ 1,500.00 No. ₹

29 ned Dismantling / Removing of Rolling Shutter. 4.00 ₹ 1,000.00 No. ₹

30 ned Dismantling / Removing of GI pipe (15mm) 100.00 ₹ 74.77 R. Mt. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

31 ned Dismantling / Removing of GI pipe (25mm) 100.00 ₹ 74.77 No. ₹

32 ned Dismantling / Removing of GI pipe (32mm) 50.00 ₹ 74.77 No. ₹

33 ned Dismantling / Removing of GI pipe (40mm) 30.00 ₹ 74.77 No. ₹

Self Dismantling sanitary fittings like wash basin, W.C. pan Indian

Explai and European type, flushing tank etc. including stacking the

34 ned materials with all lead and lift. 92.00 ₹ 405.65 No. ₹

PART C:- REPAIR & REHABILITATION WORKS

All Item qty are based on assumption and visual

assessment. Actual Qty may vary after existing is

Providing Cement Concrete work 50% - M30-(design mix)

and 50% micro concrete plus recron - 3s (12mm long

polyester fiber) plus appropriate dose of super

plasticizer with curing, finishing smooth, etc. complete for

jacketing of structural members at all floor levels, lead, lift,

including breaking, chipping, dismentling existing loose cover

concrete and exposing respective existing reinforcement as

directed by the engineer-in-charge, applying wirebrush or

mechanical clean with brush for making surfaces of steel and

concrete free from rust and other loose materials, applying

rust removing chemical on existing reinforcement, applying

after 6 hours of anti-corrosive coating on existing

reinforcement, applying epoxy binding treatment and

bonding agent on existing concrete surfaces as directed by

the Engineer-in-charge, etc. complete. The make and quality

of rust removing chemical, anti-corrossive coating, polymer /

epoxy bonding agent shall be approved by engineer-in-

charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which

shall be submitted before start of work and shall be approved

by the Engineer-in-charge.

The rates shall include the cost of providing, erecting and

maintaining leakproof shuttering /formwork /scaffolding, etc.

to be used for concreting, providing and erecting props,

temporary frame work and maintain them in position for

required time, to existing load bearing elemnts for reliving

loads coming on to structural members being

repaired/strengthened but excludes the cost of

reinforcement. The rate shall also include required breaking

of adjoining RCC structural elements like slab, beam, etc.

and reinstating the same in original shape and size by using

above mentioned procedure and material, as directed by the

Engineer-in-charge, etc. complete.

If required all loose cover concrete shall be removed as

directed by the engineer-in-charge.

Any other work which may get disturbed due to above

mentioned procedure shall be repaired and reinstated to

original condition to the complete satisfaction of the Engineer-

in-charge and NOS claim for extra payment for the same

Self shall be entertained.

Explai Chemical make: Roff / Fosroc / Ultra-tech / Sunanda

35 ned Chemicals or equivalent company only. 14.00 ₹ 29,664.00 C.M. ₹

Fixing clerestory window chowkhats in existing openings

including cutting masonry for hold fasts, embedding hold

fasts in cement concrete blocks with cement concrete 1 : 3 :

6 (1 cement : 3 coarse sand : 6 graded stone aggregate

mm single size), painting two coats of coal tar to sides of

Self chowkhats and making good the damge to walls complete

Explai including disposal of rubbish to the dumping ground within

36 ned m lead. 20.00 ₹ 399.00 NOS. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing and applying cement mortar (1:3) modified by

using polymer and expanding grout additives at various

thickness for repair/strengthening of various RCC elements

at all floor levels, lead, lift, including breaking, chipping,

dismentling existing cover concrete and exposing existing

reinforcement, applying wirebrush for making surfaces of

steel and concrete free from rust and other loose materials,

applying rust removing chemical on existing reinforcement,

applying anti-corrosive coating on existing reinforcement,

applying polymer bonding agent on existing concrete

surfaces before applying polymer modified mortar in

specified thickness as directed by the Engineer-in-charge.

The rates shall also include providing and applying 12 mm

thick cement mortar (1:4) modified with plasticizer for

finishing smooth the repaired surfaces, providing and

applying curing agent on the repaired surfaces, etc. complete

as directed by the Engineer-in-charge. The make and quality

of rust removing chemical, anti-corrossive coating, polymer

bonding agent, polymer and expanding grout additives,

plasticizer, curing agent, etc. shall be approved by engineer-

in-charge. The procedure for application shall be strictly in

accordance with manufacturer's detail specification, which

shall be submitted before start of work and shall be approved

by the Engineer-in-charge.

The rates shall include the cost of providing, erecting and

maintaining leakproof shuttering /formwork /scaffolding, etc.

to be used for the purpose, providing and erecting props,

temporary frame work and maintain them in position for

required time, to existing load bearing elemnts for reliving

loads coming on to structural members being

repaired/strengthened but excludes the cost of

The rates shall include the cost of providing, erecting

formwork with drainage outlet for presocking and air venting.

The formwork shall be such that it provides suitable excess

points to pour or pump the mixed micro fluid concrete in

place. The cost shall also include providing and erecting

props, temporary frame work and maintain them in position

for required time, to existing load bearing elements for

relieving loads coming on to structural members being

repaired/strengthened but excludes the cost of

Chemical make: Roff / Fosroc / Ultra-tech / Sunanda

Chemicals or equivalent company only.

Notes-: Ready made chemical used only as per approved

brand & confrimed with consultant only.

Note :- Consider single measurement only

Self 25mm thickness 250.00 ₹ 1,208.00 S.M. ₹

37 ned 50mm thickness 250.00 ₹ 2,348.00 S.M. ₹

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent make

including cost of all equipments, tools, material, labour, etc.

Standard procedure as mentioned in manufacturer's

specifications shall be strictly followed, which shall be

submitted and got approved from the authority prior to start

of work. The rate shall also include cost of drilling of hole of

required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air blower and

other necessary tools and tackles, positioning, providing and

grouting chemical, allied fixtures and fasteners, etc. but

excluding the cost of reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-in-

In general the work shall be carried out as per the standard

specifications of P.W.D. / C.P.W.D./

GWSSB relevant drawings and as per the instructions of

Engineer in Charge. Work shall be carried

out as per item description.

Self (B) 10 mm dia 500.00 ₹ 90.00 NOS ₹

Explai (C) 12 mm dia 300.00 ₹ 125.00 NOS ₹

38 ned (D) 16 mmm dia 150.00 ₹ 190.00 NOS ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing and applying cement mortar 1:4 enriched with

expanding grout additive in required proportion in cement for

repair of cracks in RCC and Non-RCC members after making

25mm x 25mm groove, cleaning the surface and applying

coat of bonding, finishing Smooth the repaired surfaces,

providing and applying curing agent on the repaired surfaces,

etc. complete at all floor levels as directed by engineer-in-

charge. The make and quality of expanding grout additives,

bonding agent, curing agent, etc. shall be approved by the

engineer-in-charge. The procedure for application shall be

strictly in accordance with manufacturer's detail specification,

which shall be submitted before start of work and shall be

Self approved by the Engineer-in-charge

Explai Chemical make: Roff / Fosroc / Ultra-tech / Sunanda

39 ned Chemicals or equivalent company only. 1000.00 ₹ 121.00 R.M. ₹

Carrying out Injection grouting for cracks in RCC structural

members by drilling holes of 15 mm diameter upto minimum

depth of 75 mm, fixing aluminium nozzle plasticised

expanding grout admixtures high fludity with low water

cement ratio or at specified pressure with grouting pump till it

the material refuses to impregnate inside the hole.Grouting

material only as suggested by the Engineer-in-charge,

injection grouting shall be carried out more than once for a

hole to assure proper spreading of grout material and filling

of capillaries / voids within the element. After satisfactory

injection grouting, the M.S./ galvenized pakers shall be cut

and sealed by non-shrink epoxy putty. The surface shall be

finished Smooth with C:M (1:4) and reinstated to the original

condition as only directed by the Engineer-in-charge.

The rate shall include the cost of providing and supplying all

tools, materials, labour, scaffolding, props, formwork, etc.

complete. The make and quality of cementious grout or

admixtures , epoxy putty, etc. shall be onlyas approved by

the Engineer-in-charge. The procedure for application shall

be strictly in accordance with manufacturer's detail

specification, which shall be submitted before start of work

and shall be on;y approved by the Engineer-in-charge.

(Actual no of holes and their locations shall be as decided by

the Engineer-in-charge) (Note:- Injection grouting consider in

unit nos only irrespective of chemical consumtions)

Expali Chemical make: Roff / Fosroc / Ultra-tech / Sunanda

40 ned Chemicals or equivalent company only. 100.00 ₹ 250.00 NOS ₹

Carrying out Injection grouting for cracks in RCC structural

members by drilling holes of 15 mm diameter upto minimum

depth of 75 mm, fixing aluminium nozzle / rubber pipe using

non-shrink epoxy putty, low viscous injecting epoxy grout or

elastic two componenet polyurathene injection resin material

at specified pressure with grouting pump till it the material

refuses to impregnate inside the hole. If required or

suggested by the Engineer-in-charge, injection grouting shall

be carried out more than once for a hole to assure proper

spreading of grout material and filling of capillaries / voids

within the element. After satisfactory injection grouting, the

pakers shall be cut and sealed by non-shrink epoxy putty.

The surface shall be finished smooth with C:M (1:4) and

reinstated to the original condition as directed by the

Engineer-in-charge.

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

The rate shall include the cost of providing and supplying all

tools, materials, labour, scaffolding, props, formwork, etc.

complete. The make and quality of epoxy grout, epoxy putty,

etc. shall be approved by the Engineer-in-charge. The

procedure for application shall be strictly in accordance with

manufacturer's detail specification, which shall be submitted

before start of work and shall be approved by the Engineer-in-

charge. (Actual no of holes and their locations shall be as

decided by the Engineer-in-charge) (Note:- Injection grouting

consider in unit nos only irrespective of chemical

Expali Chemical make: Roff / Fosroc / Ultra-tech / Sunanda

41 ned Chemicals or equivalent company only. 70.00 ₹ 450.00 Nos. ₹

Providing and appliying thixotropic Making up lost section of

concrete / mortor with thixotropic repair mortor of one-

component, normal-setting, shrinkage-compensating,

thixotropic mortar for layers up to 20 mm thick. Supply and

application of one-component, normal-setting, shrinkage-

compensating thixotropic mortar made from cementitious

binders, selected aggregates, special additives and synthetic

polyacrylonitrile fibres, for reconstructing deteriorated

concrete structures. Apply the mortar after adequate

preparation of the substrate by removing all deteriorated

concrete to form a sufficiently-rough, solid substrate with no

detached portions. Clean the steel reinforcement down to

bare metal and apply a passivating treatment by brush-

applying two coats of one-component, anti-corrosion

cementitious mortar. Apply the product by trowel or spray

with a continuous-feed rendering machine on a clean

substrate saturated with water in layers up to 20 mm thick.

To improve expansion in the open air during the first few

days of curing, add a special curing additive when mixing the

mortar to reduce both plastic and hydraulic shrinkage at a

dose of 0.25% in weight on the weight of the mortar. The

product must comply with the minimum requirements of EN

1504-3 for structural mortars and have the following

performance characteristics:

Compressive strength (EN 12190) (MPa):> 40 (after

days), Flexural strength (EN 196/1) (MPa): 7 (after 28 days),

Compressive modulus of elasticity (EN 13412) (GPa):

(after 28 days) Adhesion to substrate (EN 1542) (MPa):>

(after 28 days), Capillary absorption (EN 13057) (kg/m²•h0.5):

< 0.20, Thermal compatibility measured as adhesion

according to EN 1542 (MPa): – freeze-thaw cycles with de-

icing salts (EN 13687/1): > 1.5 (after 50 cycles), Storm

cycles (EN 13687/2):> 1.5 (after 30 cycles), dry thermal

cycles (EN 13687/4):> 1.5 (after 30 cycles), Reaction to fire

(EN 13501-1) (Euroclass):1

Consumption (per cm of thickness) (kg/m²): approximately

18.5 Kg included and calculated in the price for work carried

out according to specification: (1) hydro-cleaning of adhesion

surfaces and saturation of substrate with water immediately

before applying the mortar; (2) application of the mortar by

trowel or spray around steel reinforcement; (3) levelling off

surfaces with a straight edge and final tamping; (4) careful

curing of the mortar by spraying on water for at least 7 days

(3times) after application.

Self Note :- Consider single measurement only

Expali 25 MM THICK 250.00 ₹ 1,370.00 S.M. ₹

Explai Pointing on brickwork with cement mortar 1:1 (1- cement : 3-

43 ned coarse sand) 4807.00 ₹ 199.00 S.M. ₹

PART D:- MASONARY & PLASTER WORKS

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in Cement

Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash Bricks

Ground floor 147.00 ₹ 4,511.97 C.M. ₹

First floor 0.00 ₹ 4,786.95 C.M. ₹

44 18 Second floor up lvl 6.0 m height 0.00 ₹ 5,061.92 C.M. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing and constructing half brick masonary in fly ash

building bricks having crushing strength not less than

Kg./sqC.M.. in cement mortar 1:4 (1 cement :4 coarse sand )

curing etc. comp.

Ground floor 10.00 ₹ 625.53 S.M. ₹

First floor 10.00 ₹ 631.79 S.M. ₹

45 19 Second floor 0.00 ₹ 638.04 S.M. ₹

Providing & Applying 15mm. th. cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3 sand) (A) For wall and

similar surfaces ( Lead for each floor above or below

Ground Floor 869.00 ₹ 237.51 S.M. ₹

Providing & Applying 20mm. to 35 mm thick Heavy Roller

plaster on walls or similar surfaces at all floor levels

consisting of 12 mm av. Th. Backing coat of C.M. 1:3 (1

cement:3 sand : racron 3s ( 0.5 nos per bag )) also plaster

master wterproofing chemical 100 ml /bags as per companey

manual & approved by E.I.C or consultant & 8 mm. th.

Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick

cement slurry and apply roller horizontal as well as vartical (

two times ) up to good quality and size of grain in elevation

as per directed by engineer incharge.

47 16 Outside All Floor Plaster 2200.00 ₹ 417.00 S.M. ₹

Providing and fixing 150 mm wide, approved quality chicken

wire mesh (FRP / PVC) at junction of brick work and RCC

work or two dissimilar surfaces, at all heights fixed by nails,

Self rowal plugs or tag by cement mortar 1:3 before applyingthe

48 Expln. plaster, including curing, scaffolding all complete as directed. 970.00 ₹ 102.00 S.M. ₹

Providing throating or plaster drip and moulding it to R.C.C.

49 22 chajja etc. comp.. For all floor 250.00 ₹ 41.66 R.M. ₹

PART E:- FLOORING WORKS

Providing & Laying green polished kota stone slab flooring

at all floor levels,over 20 mm av.th.base of C.M.

1:6(1cement: 6 sand) laid over&joined with grey cement

slurry incl. Rubbing & polishing etc. comp.

50 24 (A) 25 mm. thick For all Floor 870.00 ₹ 989.45 S.M. ₹

Self Mirror Polishing (Min. of 2 to 3 finishing coats) of existing all

Explai Kota / Granite / Marble Stone Flooring, filling the joint with

51 ned color cement mortar, cleaning, etc… complete. 0.00 ₹ 170.33 S.M. ₹

Providing& laying granite slab18mm thick in flooring, treadsof

steps and landing laid on bed of 20mm thick cement mortar

1:6 (1Cement : 6 coarse sand) or lime mortar 1:1.5 laid and

finished with flush pointing in white or colour cement

including rubbingandpolishingcomplete. (BasicRate:

Conducting Granite Stone river wash / Leather / Honed finish

Self on new granite stone or existing granite stone for Flooring

53 Expln. and dedo work. (Only finishing rate.) 50.00 ₹ 400.00 S.M. ₹

Providing & laying granite slab 18mm thick in Window-Door

seal Frame Etc laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colour cement,

including rubbing & polishing comp.

55 29 Labour charges for edge finishing for granite 1259.00 ₹ 43.43 R.M. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & fixing Glass Mosaic Tiles of 1" x 1" or 2" x 2"

with mesh on back as per consutant's instruction / in-

charge engineer to be fixed on 10 mm thk 1:1 cement

mortar / N.S.A. on any vertical / horizontal surfaces after

getting ruff surface on existing or new surfaces. All the joints

Self to be filled with Colour cement of matching to glazed tile.

Expali Along with flush pointing & cleaning the surface etc.

56 ned complete... 288.00 ₹ 3,309.00 Sq. Mt. ₹

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels,

in flooring, treads of steps & landings laid on a bed of 12 mm.

Av. Th.C.M.1:3(1cement :3 sand) finished with flush pointing

57 32- A in white cement etc.com. For all floors 90.00 ₹ 857.42 Sq. Mt. ₹

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th.

C.M.1:3(1cement :3 sand) including necessary cement paste

for fixing and joined with white cement slurry etc. complete.

58 32 For all floors 234.00 ₹ 887.64 Sq. Mt. ₹

Providing and laying coloured designer pattern glazed tiles of

the size 300 mm x 600 mm x 8 mm / 300 mm x 450 mm x

mm in skirting, risers of steps and dedo on 10 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

59 32- B white cement slurry. 675.00 ₹ 1,426.95 Sq. Mt. ₹

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing flooring

and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp.Size 24" x 24"

60 31 For Antiskid tiles. 215.00 ₹ 1,426.95 Sq. Mt. ₹

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

61 32- C cement slurry. 84.00 ₹ 1,081.71 Sq. Mt. ₹

Providing and laying tile made out of composition of various

natural stone (No artificial) of appropriate thickness with

mesh on back side in Dedo laid on existing plaster (ruff

required) and fixed with Tile fixing chemical adhesive (Ultra

Strong) of Roff / Fosroc / Ultratech and tile joints to be filled

Self with colour cement slury matching with stone colour including

Explai rubbing etc. complete. (Plaster rate is not included in this

Providing & laying 1,200 mm. x 2,400 mm. or 1600 mm. x

800 mm. or 1,200 mm. x 1,200 mm. x 9 mm. thick full body

coloured porcelain stoneware tiles, "Chiaro" of endless Series

by "Nexion" or, Midas Series by Dimore Approved equal, All

complete as per detailed drawing. (Laid on screed as paid

separately.) Tiles laid with high – performance, deformable

gray or white cementitious adhesive, with extended open

time with high wetting capacity (chemical as directed by

engineer in charge only). Rate also including minimum

mock ups for approval, including 2 to 3 mm. Spacer and

jointed with epoxy grout including finished with flush pointing

Self & cleaning the surface etc. as directed by engineer in charge

63 ned (Basic rate 3000.00 Rs/S.M) 0.00 ₹ 4,572.00 Sq. Mt. ₹

Providing and filling Epoxy grout ( Up to 6 mm ) as per

drawing or approved or suggested brand by consultant /

Self Engineer in charge in 4mm to 6mm thick tiles joint including

Explai spacer with cleaning of joint by vacuum or blower etc As per

64 ned directed by Consultant Engineer Incharge. 0.00 ₹ 40.00 R. Mt. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & Laying 12 mm thick Pop Sheet ( for protection of

existing flooring ) laying & joint are fell up with good qulity of

Self pop powder as a protection while working & up to working &

Explai up to working period without considering time limit etc all as

65 ned directed by engineer incharge 0.00 ₹ 120.00 Sq. Mt. ₹

PART F:- WATERPROOFING WORKS

NOSTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years given

on a prescribed proforma duly stamped (2) The rate shall

include for work at all floors & conducting water proof test as

directed. (M.R.)

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 Kg./sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th' in

the floor of the depression & about 18mm th' On the side

walls of the depression up to the floor level, water proofing

plaster about 18 mm. th' be continued on the walls above the

floor level for a height of 600 mm. with surface suitable to

receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm

NOSminal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

66 82 (Cement consumption 0.316 Bags / S.M.) 10.00 ₹ 296.00 S.M. ₹

(B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

2.75 Kg./sqm of cement admixed with proprietary water

proofing compound comforming to IS:2645 over the R.C.C.

slab including cleaning the surface before tratment.

(b) Laying cement concrete using broken bricks/brick bats

mm to 100 mm size with 50% of cement mortar 1:5 (1

Cement : 5 Coarse sand) admixed with proprietary water

proofing compound conforming to IS:2645 ,brick bats is

finally covered by jointless cement plaster 20mm th. in C.M.

1:4 added with special water proofing compound confirming

to IS:2645 & top smooth finished with trowel with false

chequered marking of 300 mm.size.The treatment is carried

along the vertical surface of the parapet & other adjoining

wall up to height of about 300 mm in a shape of quarter

round vata Incl. curing etc. Comp. With average thickness of

67 83 120 mm and minimum thickness at khurra as 65 mm. 159.00 ₹ 511.00 S.M. ₹

Proviidng and filling in depression of bath and W.C. at all

Self floor levels , after completing plumbing work of pans, pipes,

Explai traps etc. with cinder or fly ash as directed by engineer in

68 ned charge. etc.complete. 23.00 ₹ 500.00 C.M ₹

Self Toilet / Wet Areas Chemical Waterproofing:

69 Explai Providing and carry out waterproofing treatment to Toilets, 75.00 ₹ 500.00 C.M ₹

Self Terrace Waterproofing on Existing Surfaces:

70 Explai Providing & laying Brushbond Roofguard Premium- High 1075.00 ₹ 500.00 C.M ₹

Self Providing cement vata (10 cm x 10 cm size) quarter round in

Explai cement mortar 1:1 including neat cement finishing, watering

71 ned etc. complete. 706.00 ₹ 23.68 R.M. ₹

Providing and laying broken China mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar crème out upto surface using white

cement including rounding off junctions and extending them

upto 15 C.M. along the wall, clearing with water and oxalic

72 84 acid etc. as directed. 1075.00 ₹ 747.29 S.M. ₹

PART G:- OTHER WORKS

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

73 ned Vegetation Removal from building 5.00 ₹ 1,500.00 JOB ₹

Glass Façade-Fin Based Suspended Structural Glazing With Spider

Designing, Supplying, Installing & Testing Fin Based Suspended

Structural Glazing, using 316 grade, brush finished stainless steel

Spider Fittings by "Dorma" or "Geze" or Approved equal make, as

per design intent drawings as well as shop drawings, prepared by

the contractor, to be Approved by Engineer-in-Charge. The

Structural Glazing System shall be designed to withstand the design

wind pressure of 150 Kgs. / S.M., confirming to IS-875 part iii. The

system shall pass the proof test at 1.50 times the designed wind

pressure. The Spider clamps shall have tolerances confirming to

The non visible aluminium surfaces, if any, shall have minimum

achromatizing treatment. Appropriate installation of 4-way spider

clamps for glass to glass joints, and 2-way spider clamps for glass to

wall joints shall be carried out. The clamping system with brackets

shall be designed to accommodate 3-dimensional movements.

The glazing shall be of 13.52 mm. thick laminated glass, consisting

of 6.00 mm. thick thick clear toughened glass or as selected by

Architect + 1.52 mm. thick PVB + 6.00 mm. thick toughened

reflective glass as per selection by "Saint Gobain" or "Asahi" or

"Gujarat Guardian" Approved equal make, supported by 19.52 mm.

thick Laminated Glass Fins, consisting of 10.00 mm. thick clear

toughened glass + 1.52 mm. thick PVB + 8.00 mm. thick clear

toughened glass, using the spider fittings to provide lateral stiffness

against wind load, deflections, dead load and other expected

specified loads. Glass Fins shall be suspended using I2-350 mm.

grade stainless steel brackets,

fixed to structural beams with Approved anchor fasteners by "Hilti"

or "Fischer" or Approved equal make, and the fins shall support the

facade from beam to Finished Floor Level. The facade design shall

be certified with technical cut sheets and stability report, and shall

be Approved by the PMC before execution. including scaffolding,

The quote shall include all relevant accessories such as brackets,

insert plates, anchor fastners, sub frames, etc. complete. with

microwave cured EPDM / Neoprene 60 durometer gasket in

unexposed areas, structural and weather clear sealants DC 789 by

"Dow Corning" or "GE" or Approved equal make, routels, fins,

clamps, splice plates, spacer tape, backer rods, teflon washers to

prevent glass damage, and flashings to seal the gaps between

curtain wall and the building structure, to produce the final

outcome, to perform as per specifications and drawings as per SQR.

The quoted rate shall include all design, engineering & shop

drawings approval from Engineer-in-Charge, complying with all

statutory obligations and safety codes. All the glass panels shall be

delivered to site, processed and ready for installation.

Glass Approved make:

Saint Gobian, Gujarat Guardian, AIS

Explai Hardware Approved Make:

74 ned Dormakaba, Geze, Ozone, Hormann. 0.00 ₹ 11,615.00 S.M. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x 1.17 mm

(of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal Three

track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section

no;8688, @ Wt. 1.07 Kg/mt), vertical member of size 92 mm x

31.75 mm x 1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt)

with sliding shutters of horizontal member size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminium fittings &

fixtures and transparent silicon sealant glass fixing to frame as per

75 38 (A) Same as above but Colour anodized 110.00 ₹ 1,591.87 S.M. ₹

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm (of

Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two track

member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section

no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size 61.85 mm x

31.75 mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size 40 mm x18

mm x 1.29 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt)

vertical member of size 40 mm x 18 mm x 1.29 mm (of jindal

section no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

0.457 Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc.

complete for window.

76 39 (A) Same as above but Colour anodized 45.00 ₹ 1,705.67 S.M. ₹

Providing and fixing standared extruded of alluminium section of

size 63mm x 38.10mm x1.2mm , @ Wt. 0.643 Kg/mt with colour

Powder Coated alluminium frame for ventilation with 5 mm thick

frosted glass as details etc complete for Ventilation

77 40 (A) Same as above but Colour anodized 40.00 ₹ 2,414.00 S.M. ₹

Providing & Applying specifically developed to from flexible

water proof seals in cracked reinforced concrete with

infiltration of water (sealing pipe work which passes through

concrete)-mode of measurement up to 6mm thick in lineer

mm. Procces: Removing all dust & clean upper surface of

pipe & inner surface in concrte hole apply sweel chemical on

all periphery &both sides making same that the boundary

formed is at last 5cm,cut off the tip of the nozzle according to

the size of bead required,and pierce the membrane under the

nozzle. insert the cartride in an extrusion gun and apply the

product directly into concrete or element to be sealed

Self (A) 75 mm dia 10.00 ₹ 117.00 NOS ₹

Explai (B) 110 mm dia. 10.00 ₹ 584.18 NOS ₹

Explai Aluminum section Window opening and refixing with all

79 ned necessary fix & fiting 10.00 ₹ 481.00 S.M. ₹

Self M.S grill opening and re-fixing with necessary material and

Explai welding / screwing / bolting / anchors, etc... required for Re-

80 ned fixing the same. 500.00 ₹ 29.04 Kg. ₹

RCC Core Cutting is about making precise, circular cuts for

creating holes of required diameters for Rehabilitation in civil

Self works. The core drilling rod is fitted with diamond pieces at

Explai the drilling end. The core cutting machine can be used for

81 ned both horizontal and vertical hole making purposes.

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Apply hacking on RCC member manual or by mechanical as

Self discoused by engineer incharge. 350 - 400 notches (dents)

Explai per sqmt. Process of making the back ground rough before

82 ned plastering for better bonding of mortar with RCC (Tacha) 400.00 ₹ 20.00 S.M. ₹

Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted

on both side with adhesives as specified by the

manufacturers. The laminate shall be as per approved shade

& texture, of make incl. Sal

wood frames of finished size 12cm x 7cm.incl. S.S. Hinges

with nessary screws & Anodized aluminum fixtures &

83 33 fastenings For all Floor 0.00 ₹ 3,720.00 S.M. ₹

Same as Above But Without Frame 298.00 ₹ 2,520.00 S.M. ₹

Self Providing & Fixing Nylon net (having net weight-0.065

Explai kg/sq.mt) in outside as well as inside plaster / terrace water

84 ned proofing etc as direct by E.I.C 1933.00 ₹ 32.00 S.M. ₹

Providing and fixing double scaffolding system (cup lock

type) on the exterior side, up to seven story height made with

40 mm dia M.S. tube 1.5 m centre to centre, horizontal &

vertical tubes joining with cup & lock system with M.S. tubes,

M.S. tube challies, M.S. clamps and M.S. staircase system in

the scaffolding for working platform etc. and maintaining it in

a serviceable condition for the required duration as approved

and removing it thereafter .The scaffolding system shall be

stiffened with bracings, runners, connection with the building

etc wherever required for inspection of work at required

locations with essential safety features for the workmen etc.

complete as per directions and approval of Engineer in-

charge .The elevational area of the scaffolding shall be

measured for payment purpose .The payment will be made

once irrespective of time duration of scaffolding.up to specific

Self work. (Payment will be consider for 1 time only. Scafolding

Explai will be required up to all works- Civil + Interior works gets

85 ned completed) 10800.00 ₹ 230.00 C.M. ₹

Providing and Laying Double bamboo scaffolding for

Self elevation work etc compelte as directed by engineer

Explai incharge &with all lead & lift with all saftey as per directed by

86 ned engineer incharge (for whole repair period) 0.00 ₹ 175.00 C.M. ₹

Self Vertical lead for -11m excavated soil / debris / waist material

Explai to deposit at +1.00m on outside 50m to 100m horizontal

Carrige of material over distance exceeding 0.5 Km.

.Including loading,unloading and stacking (for all material

other than asphalt,cement & steel ) per trip 2.83 C.M

up to 2.0 km 0.00 ₹ 485.07 Trip ₹

Self up to 4.50 km 30.00 ₹ 768.34 Trip ₹

Explai up to 5.00 km 50.00 ₹ 821.99 Trip ₹

88 ned up to 5.50 km 50.00 ₹ 689.01 Trip ₹

PART H:- PAINT WORKS

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall / ceiling surface to give an

even shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

All Floor 10800.00 ₹ 40.59 S.M ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Wall / Ceiling painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall surface to

give an even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand papered

For every subsequent coat Extra over item no.above

Providing & Applying Anti Carbonation paint with exterior grade

acrylic priming coat including materials, equipments, scafolding for

Self any floor ht., cleaning, etc... complete as per below specs;

91 ed 1. Apply One Coat Of Exterior Acrylic Water Base Primer (Asian / 4400.00 ₹ 675.00 S.M ₹

Applying Priming coat over new steel and other metal surface after

over and including preparing the surface by throughly cleaning oil,

grease dirt and other foreign matter and scoured with brushed fine

steel wool, scrapers and sand paper with ready mixed priming paint

brushing red lead.

Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to give

an even shade including cleaning the surface an even shade

including cleanicn the surface of all dirt, dust and other foreign

(A) For plain grill For all Floor

Painting two coat (inlcuding one coat of Primer) on new steel

and other metal surface with Epoxy paint, burshing to give an

Self even shade including cleaning the surface of all dirt, dust and

Explai other foreign matters as per Insatruction by Architect and

93 ned Engineer-in-charge. 4290.00 ₹ 182.00 S.M. ₹

Providing & applying Rust remover chemical.(Cleaning

agent) apply with brush for complete wetting of rusted metal

surface and allowed to react it for 16-24hrs after 24hrs, a

white layer will appear which will protect further corrossion of

metal.The surface should be wire brushed & throughly

cleaned for dust with dry cloths.Use single component

sulphate & chloride free lequid or only as per directed by

Engineer incharge of consultant.( Perimeter x length consider

Self for payments for steel structure members as per directed by

Explai engineer incharge only . No lead and lift payment all rate

94 ned including all lead and lift ) 0.00 ₹ 83.00 S.M. ₹

Self Providing & applying Dholpuri finish, rain drop finish, rustic

95 Explain texture work with finished groove over existing plaster surface as 3080.00 ₹ 400.00 S.M ₹

Self Providing & applying Exposed Brcikwork & Exposed Concrete

96 Explain texture work with finished groove over existing plaster surface as 1320.00 ₹ 936.00 S.M ₹

PART I:- STEEL FABRICATION WORKS

Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of

Self Engineer- ncharge, (for payment purpose only weight of

Explain stainless steel members shall be considered excluding fixing

97 ed accessories such as nuts, bolts, fasteners etc.). 2448.00 ₹ 450.00 K.G. ₹

Providing and fixing M.S. grills of required pattern to wooden

frames of windows etc. with M.S. flats at required spacings and

frame alround, square or round bars with round headed bolts and

nuts or by screws.

98 36 (A) Plain / Decorative grill For all Floors 3841.00 ₹ 104.20 Kg ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & fixing in position collapsible steel shutters with vertical

channels 20 x10 x 2 mm. Braced with flat iron diagonals 20 x5mm

size with top & bottom rails of T-iron 40x40x6mm. with 38mm dia.

steel pulleys comp. with bolts, locking arrangements, stoppers,

99 37 handles incl. applying a priming coat of Redlead paint etc. comp. 32.00 ₹ 5,865.10 S.M ₹

Providing and fixing Rolling Shutters of approved make made of

mm wide M.S. laths inter locked together through their entire

lenght and jointed together at the ends by end locks mounted on

specially designed pipe shaft with bracket plates, guide channels

Self and arrangements for inside and outside locking with push-pull

Explain operation including the cost of hood cover and spring etc. complete

100 ed (A) Shutters having width below 3.5 M. 14.00 ₹ 3,503.41 S.M ₹

Steel work welded in built up sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat of

(A) in beams & joists channels angles, tees, flats with connection

plates or angle cleats as in main & cross beams, hip & trussed

101 48 purlins connected to common raffers & the like. 7085.00 ₹ 90.4786 KG ₹

Supply & fixing factory finished cold formed Light guage steel (GI)

frame sections confirming to SP:6 (5) 1980 at site or work including

riveted, bolted or welded in builtup for all type of sections ,in

framed work, cutting, hoisting, fixing in position and applying

primer coat of approved steel primer etc. complete as per

structural designs & directions of Engineer-in-charge.

102 48- A Rate is Incl. of 1% Cess. 20040.00 ₹ 114.4431 KG ₹

Providing and Fixing Hollow steel Sections Framed Work including

Cutting, Hoisting, Welding & Fixing in position Purlin, Main Chord

103 48- B etc. as per Engineerin- charge.TATA / JINDAL / ASIAN Make 2520.00 ₹ 126.0000 KG ₹

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and impet

washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata /Jindal or

Providing & Fixing any color / pattern Alluminium Composite

pannel 4 mm thick exterior grade with GI Fabrication Work,

welding, anchor / fastner, SS Screws, Silicon, Sealant, finishing,

etc... & complete…

GI Fabrication Work:

Supply & fixing factory finished cold formed Light guage steel frame

sections confirming to SP:6 (5) 1980 at site or work including

riveted, bolted or welded in builtup for all type of sections ,in

Self framed work, cutting, hoisting, fixing in position and applying

Explain primer coat of approved steel primer etc. complete as per

ed + 48- structural designs &

105 B directions of Engineer-in-charge. 500.00 ₹ 2,026.00 S.M. ₹

Providing & Fixing any color / pattern Alluminium Composite

Self pannel (ACP) 3 mm thick with Silicon, Sealant, finishing, etc... &

106 Expln. complete... 92.00 ₹ 1,025.00 S.M. ₹

PART 02: INTERNAL BUILDING WATER SUPPLY AND SANITARY WORKS

Providing & fixing C.P. brass pillar cock with copper connection,

C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1, HindWare

107 53 Cat. No.: F650003, Jaquar FLR-5011N

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry wareG3104A1, HindWare

108 54 F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing flush cock consisting lever, cartridge sleeve & flange &

Make- Cera EXPOSED PART F2013751 &Concealed part F4060101,

Parry ware T9824A1&T9823A1, Jaquar FLR 5083 KN , CONCEALED

BODY ALD-081,HindWare F280052 & CONCEALED STOP COCK

Providing & fixing 15mm C.P. brass angle valve (Stop Cock) with

C.P. copper connecting pipe 450 mm long and nuts, washer and

brass flange complete, including cutting and making good the wall

where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare Cat. No.:

Providing and fixing Wash Down Water closet European type W.C.

pan with integral P or S trap with normal closing seat cover L bend

ncluding jointing the trap with soil pipe in cement mortar 1:1 (1

cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera, Parry ware ,HindWare, Jaquar-Size- 350 x 500 x

mm Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

111 57 C0278, HindWare sleek 20011, Jaquar- CNS-WHT-751P180SPPZ 16.00 ₹ 3,282.00 No ₹

Providing & fixing Wall wash Hung basin with single hole for pillar

tap , Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH), Jaquar

Providing & fixing white vitreous china urinal of size 450 x325mm

as per IS-2556 (Part-2 ) with C.I. hangers and 15mm dia. C.P.

spreader,32mm dia CP bottle trap and pipe to wall with C.P. flange

complete including cutting and making good the walls and floors

wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar URS-

113 59 13261H ,HindWare BACK SMALL 60001 24.00 ₹ 2,476.00 No ₹

Providing & Fixing stainless steel recessed type Soap dish of

approved make. Including providing & fixing screws, washers,

cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-1131N

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan) at

all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or "S"

trap for water closet squatting pan joining the trap with the pan &

soil pipe in C.M. 1:1 (1cement :1 fine sand) etc. Comp.(A) Vitreous

china long pattern

Make- Cera S3010109, Parry ware C0117CS/C0117* , Jaquar

Prov.& Fixing Health Faucet ABS Body with wall Hook and 1 Meter

chrome plated PVC Hose Pipe.

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar ALD-587,

Prov. & Fixing S.W. Gully trap with C.I.grating brick masonary (C.M

1:5) chamber & water tight C.I. cover with frame of 300mm x

300mm size (inside) with weight includ. plastering smooth inside &

outside 15mm. th' in C.M.1:3 etc. comp. (i) Square mouth traps

(A) 100mm x 300mm Size -P type 3.00 1292.19 No ₹

117 66 (B) 150mm x 100mm Size- P Type 3.00 1246.92 No ₹

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap chamber

with 23 cm th' B.B. masonary walls in C.M 1:5 with cement plaster

15 mm th' in C.M. 1:3 inside & outside to exposed faces, R.C.C. top

slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. for single pipe. 0.00 3155.63 No ₹

(A).Same as above but Precast RCC heavy duty Cover instead of C.I.

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less than

kg. On top etc. comp. Inside dimension,455 x 610 mm &450 mm

deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead of C.I.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 6.00 242.39 Each ₹

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe In C.M.

1:1 of following nominal internal diameters incl. Testing of pipes

and joints etc. Comp ₹

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

(Type "B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex make for

soil and waste discharge system at all floor levels incl. All fixtures

like bends, tees, shoe etc. jointed with resin of approved brand &

manufacture etc. comp. (M.R.)

Providing & fixing U-PVC pipes Confirming to IS no. 13592 (Type

"A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make for rain

water at all floor levels incl. fixtures like bends, tees, shoe etc

joined with resin of approved brand & manufacture etc. comp.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/ Supreme/ Jain/

Astral / Tulsi / Finolex make for water supply line at all floor levels

incl. fixtures like bends, tees, shoe etc joined with resin of

approved brand & manufacture etc. comp. Pipe shall be fixed on

the wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive solvent,

including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

mm diameter with jali of the following nominal diameter of self

cleaning design with C.I. scread down or hinged grating including

124 75 the cost of cutting and making good the walls. 30.00 558.36 No ₹

Providing & Fixing in position PVC Cowl vent to pipes of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp.

Providing & fixing Z - clamps at all floor levels of approved design to

C.I. S.C.I. or PVC pipes including the cost of cutting holes & making

good the wall etc. Complete - 100 mm dia as per architect

(C) 110 mm dia to upto 150 mm dia 110.00 90.00 No ₹

Providing erecting and fixing double coated Sintex/Super/Reno

PVC (ISI) mark water tank of required capacity each with all

127 78 necessary fittings & connection etc. complete on terrace. 45000.00 3.95 Lit ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work incl.

boxing, centering, vibrating, curing & mixed with approved water

proofing cement compound or "CEMWET"or"PIDICRETE

LW"integral water proofingadmixture as water proofing agent to be

mixed with 50 kg. cement bag shall be as recommended by the

manufacture of the water proofing material, concrete work for top,

bottom slab & side pardi for Under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th' C.C

1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside wall,

inside R.C.C. pardi as per design, 10mm.th. water proofing cement

plaster in C.M. 1:3 with smooth finishing,watering etc.Comp.to all

inner face & bottom of tank curing etc. comp. incl. Locking

arrangement, outlet, inlet, overflow & wash out pipe arrangement

as necessary & C.I. Cover 0.60 x .045 weight not less then 35kg. etc.

com. as per structural drawing excluding Steel & as directed by

Engineer-in-charge.

128 79 Under Ground water Tank 5000.00 5.46 Lit ₹

Providing and fixing C.I. Man hole cover 0.60 x 0.45 mt. Size having

129 81 weight not less than 35 Kg. etc. complete. 5.00 958.17 No. ₹

Providing & fixing 600 mm.x 450 mm. mirror of superior glass at all

floor levels, mounted on 6 mm. th. A.C. sheet or plywood sheet &

fixed to wooden plugs with C.P.brass screws and washers etc. For

Providing & fixing Flushing cistern PVC with fittings 12.5 litre high

level including of all types of fastner, screwing, bolting, fittings,

Self washers, adhesive, fixing with inlet & outlet pipes, etc… complete.

131 Expln. Rate is inclusive of 1% Cess. 34.00 684.75 No. ₹

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Self Make- Cera F2013163, Parry ware G4834A1, HindWare Cat. No.:

132 Expln. F530004, Jaquar FLR-5041N 34.00 1755.00 No. ₹

Providing, Laying and jointing on true line and level UPVC pipe (SCH-

40) line of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by angineer-in-

charge. Pipe shall be fixed on the wall the help of clamp at every

two meter C/C or shall be concealed as directed including

necessary fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all materials.

Self (C) 32 mm dia. 75.00 119.15 R.M ₹

PART 03: BUILDING FIRE FIGHTING WORK

FIRE HYDRANT AND SPRINKLER SYSTEM

Contractor need to provide & submit detailed design for Electrical, Stage Lighting, A-V- System,

Acoustical Design, HVAC design & Detailed fire fighting design from authorised lincesee engineer at his

own cost. All the resposibity for such design and its execution will remain with the contractor only (and

not to the Consultant appointed by SMC). Also Contractor need to provide mock – up of various samples

as when required for Conultant and incharge engineer approval, after that only execution can be process

for such items.

SITC of:Back pull out type-Single Stage,Self

Priming,Centrifugal Pump for Main Fire Pump with Electric

Motor,Base frame and Couplings.

Moc:-Casing-CI,Impeller-Bronze,Shaft-SS410,Sleeve SS410.

Pump shall be capable of furnishing not less than 150% of

rated capacity at a head not less than 65% of rated head the

shut off head shall not exceed 120% of rated head.

UOM:-Price Per Complete Set of Pump + Motor +

Note:01.Minor civil work like tank hole/Core Cutting etc. are

in bidders scope.

(MAKE:/KIRLOSKAR/LUBI/KSB)

(a) 450 LPM at 70 Mtr Head. 0.00 77966.11 Nos. ₹

(b) 900 LPM at 70 Mtr Head. 0.00 119915.26 Nos. ₹

(c) 1600 LPM at 70 Mtr Head. 0.00 190677.97 Nos. ₹

Self (d) 2280 LPM at 70 Mtr Head. 0.00 211864.41 Nos. ₹

132 Expln. (e) 2280 LPM at 90 Mtr Head. 0.00 237288.14 Nos. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

SITC of:Back pull out type-Single Stage,Self

Priming,Centrifugal Pump for Sprinkleear Pump with Electric

Motor,Base frame and Couplings.

Moc:-Casing-CI,Impeller-Bronze,Shaft-SS410,Sleeve SS410.

Pump shall be capable of furnishing not less than 150% of

rated capacity at a head not less than 65% of rated head the

shut off head shall not exceed 120% of rated head.

UOM:-Price Per Complete Set of Pump + Motor +

Note:01.Minor civil work like tank hole/Core Cutting etc. are

in bidders scope.

(MAKE:/KIRLOSKAR/LUBI/KSB)

(b) 900 LPM at 70 Mtr Head. 0.00 119915.26 Nos. ₹

(c) 1600 LPM at 70 Mtr Head. 1.00 190677.97 Nos. ₹

Self (d) 2280 LPM at 70 Mtr Head. 0.00 211864.41 Nos. ₹

133 Expln. (e) 2280 LPM at 90 Mtr Head. 0.00 237288.14 Nos. ₹

SITC of:Back pull out type-Single Stage,Self

Priming,Centrifugal Pump for Jockey Pump with Electric

Motor,Base frame and Couplings.

Moc:-Casing-CI,Impeller-Bronze,Shaft-SS410,Sleeve SS410.

UOM:-Price Per Complete Set of Pump + Motor +

Note:01.Minor civil work like tank hole/Core Cutting etc.are in

(MAKE:/KIRLOSKAR/LUBI/KSB)

Self 180 LPM at 70 Mtr Head. 0.00 76271.19 Nos. ₹

134 Expln. 180 LPM at 90 Mtr Head. 0.00 105932.21 Nos. ₹

SITC of:Diesel Engine Driven Standby Pumping System

complete with,diesel engine,Back Pull-out Type Single

Stage,Self Priming,Centrifugal pump,Couplings & Base-

MOC:Pump Casing-CI,Impeller-Bronze,Shaft-SS410, Sleeve

SS410. Diesel Engine includes 100 ltr diesel

tank,battery,battery charger,engine oil and coolant.

UOM:-Price Per Each Set.

Note:-01.Minor civil work like tank hole/Core Cutting etc.are

in bidders scope.

(MAKE:/KIRLOSKAR/LUBI/KSB)

Self 1600 LPM at70 Mtr Head. 0.00 395762.72 Nos. ₹

135 Expln. 2280 LPM at 90 Mtr Head. 0.00 432203.39 Nos. ₹

Combined electrical auto control panel for main + sprinkler +

jockey + diesel pumps with Earthings and siren..

(MAKE:L & T/C&S/HAVELLS/SLEMENS)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper conductor for 1.1 KV. to be

laid on wall with necessary clamps or in existing trench / pipe

at road crossing or floor of following size of cables.

(MAKE:- POLYCAB/RR CABLES/FINOLEX/HAVELLS/KEI)

a) 4 core 2.5 Sq. mm 0.00 268.76 Rmt ₹

b) 4 core 4 Sq. mm 0.00 361.2 Rmt ₹

c) 4 core 6 Sq. mm 10.00 506.71 Rmt ₹

d) 4 core 10 Sq. mm 0.00 672.76 Rmt ₹

Self e) 4 core 16 Sq. mm 40.00 983.47 Rmt ₹

137 Expln. f) 4 core 25 Sq. mm 10.00 1499.59 Rmt ₹

Sypplying, Installing, testing and commissioning of GI Pipes

"C" class confirming to IS 1239. 6 mm thick. with specials

such as Tees, elbows, flanges. Including cutting, Welding,

fixing in / on walls, ceiling by using suitable etc. as per

(MAKE:ASIAN/JINDAL/TATA)

(a) 150 mm nominal dia 0.00 2445.74 Rmt ₹

(b) 100 mm nominal dia 10.00 1800 Rmt ₹

(c) 80 mm nominal dia 30.00 1700 Rmt ₹

(d) 65 mm nominal dia 0.00 1228.82 Rmt ₹

(e) 50 mm nominal dia 250.00 949.16 Rmt ₹

Self (f) 40 mm nominal dia 300.00 550.85 Rmt ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

138 Expln. (g) 25 mm nominal dia 500.00 444.92 Rmt ₹

Supplying and Painting the exposed G.I. pipes with one coat

of Zine Chromite primer with two coats of synthetic enamel

paint of approved colour / shade.

(MAKE:ASIAN /BERGER)

(a) 150 mm nominal dia 0.00 84.75 Rmt ₹

(b) 100 mm nominal dia 25.00 67.8 Rmt ₹

(c) 80 mm nominal dia 25.00 59.33 Rmt ₹

(d) 65 mm nominal dia 0.00 50.85 Rmt ₹

(e) 50 mm nominal dia 400.00 42.38 Rmt ₹

Self (f) 40 mm nominal dia 300.00 33.9 Rmt ₹

139 Expln. (g) 25 mm nominal dia 500.00 25.43 Rmt ₹

Supplying and fixing GI 'c' class pipe (Underground laying)

with screwed/flanged/welded as specified ,including short

lengths and specials as required , fixing upports, painting two

coats of approved enamel paints over a coat of pproved

ZINC OXIDE PRIMER after laying and testing to

g/sq.cm complete including necessary protective tape,

(pypkote 2mm thk IWL antiicorrosive tapes) 2mm thk,

layers of tape, for buried iping complete as specified.

(MAKE:ASIAN/JINDAL/TATA)

Self (a) 150 mm nominal dia 5.00 3050.85 Rmt ₹

140 Expln. (b) 100 mm nominal dia 0.00 2542.38 Rmt ₹

Providing fixing testing and commissioning of Oblique pattern

type stainless steel (ss 316) single headed External fire

Hydrant vale,ISI,with 63 mm dia.Female instantaneoue outlet

conf. to IS:5290,type A,including mating flanges,galvanised

nuts,galvanised bolts/studs,washers & gaskets 3 mm thick

Self with all complete.

141 Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX) 0.00 8898.31 No. ₹

Providing, fixing, testing and commissioning of 63 mm dia

15m long RRL hose pipe with 63 mm dia. Male and female

Self S.S. couplings duly binded with GI wire, rivets etc. IS

142 Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX) 0.00 4067.8 No. ₹

Double door Hose Box made of G.I.Sheet with powder

Self coated finish of 750 mm x 450 mm x 250 mm in size and

143 Expln. mounted on structural support IS:636. 18 GAUZE 0.00 4237.29 No. ₹

Single door Hose Box made of G.I.Sheet with powder coated

Self finish of 550 mm x 450mm x 250 mm in size and mounted on

144 Expln. Wall IS:636.18 GAUZE 0.00 2118.65 Nos. ₹

Providing, fixing, testing and commissioning of Standard S.S.

Branch Pipe with nozzle of 20 mm nominal bore outlet as

per IS:903 suitable to fit with standard instanteneous type

Self mm dia coupling. SS

145 Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX) 0.00 1652.55 No. ₹

Supplying and fixing First Aid Hose Reel 19mm x 30mtr

long with MS construction spray painted in post office red,

conforming to IS 884 with upto date amendments, complete

Self with the following as required. Make: ISI: IS 884-1985.

146 Expln. MAKE: NEWAGE/AAG/SAFEX/MINIMAX/SWATI) 0.00 10593.23 No. ₹

Supply & installtion, testing & commissioning of Normax

make C.I. Heavy duty foot valve with flange, Nut bolts,

Gaskets etc. with necessary complete

accessories.(MAKE: ZOLOTO/AUDCO/SANT/NORMAX) ₹

Self (b) 100 mm dia 0.00 12347.46 Nos. ₹

147 Expln. (c) 80 mm nominal dia 0.00 8000 Nos. ₹

PROVIDING AND FIXING OF C.I. "Y" TYPE STRAINER

WITH MS FLANGES, GI NUT, GI BOLT, GI WASER &

RUBBER GASKET ETC. COMPLETE AS REQUIRED.

(MAKE:- ZOLOTO / SANT/AUDCO)

Self (a) 150 mm dia 1.00 17796.62 Nos. ₹

148 Expln. (b) 100 mm dia 0.00 10593.23 Nos. ₹

Providing and fixing of butterfly valve with ms flanges, gi nut,

gi bolt, gi waser & rubber gasket etc. ISI Mark Complete as

(MAKE: OSKO/AUDCO/NORMEX/SANT/ZOLOTO)

(a) 150 mm nominal dia 0.00 7203.39 No. ₹

(b) 100 mm nominal dia 2.00 5200 No. ₹

Self (c) 80 mm nominal dia 1.00 4491.53 No. ₹

149 Expln. (d) 50mm dia 5.00 4194.92 No. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing and fixing horizontal type cast iron double flanged

Non Return Valve of approved quality S S SHEET

confirming to IS:

(MAKE: OSKO/AUDCO/NORMEX/SANT/ZOLOTO)

(a) 150 mm nominal dia 0.00 13135.6 No. ₹

Self (b) 100 mm nominal dia 2.00 6350 No. ₹

150 Expln. (c) 80 mm nominal dia 0.00 5932.21 No. ₹

Poviding and fixing of forged brass ball valve screwed end

(suitable for working pressure of 25kg/sq.cm.)

(MAKE:SANT/ZOLOTO/NORMEX/AUDCO/HONEYWELL)

(a) 50 mm nominal dia 2.00 2525.43 Nos. ₹

(b) 40 mm nominal dia 0.00 1593.23 Nos. ₹

(c) 32 mm nominal dia 0.00 1338.99 Nos. ₹

Self (d) 25 mm nominal dia 2.00 830.51 Nos. ₹

151 Expln. (e) 20 mm nominal dia 0.00 728.82 Nos. ₹

Supplying and fixing approved make 15 mm dia with

Self automatic Air Release Valve with unions etc.

152 Expln. (MAKE: OSKO/AUDCO/NORMEX/SANT/ZOLOTO) 2.00 1822.04 Nos. ₹

Supply and installation of pressure switches of suitable

range for pump sets with required size piping, globe valves,

plugs & bronze check valves with orifice in clapper &

supplemental air chamber with complete assembly as per FM

Self requirements.

153 Expln. (MAKE:- DANFOSS / HONEYWELL) 2.00 3728.82 Nos. ₹

Providing and fixing of dial type Pressure Guage having

Self mm dial & range of 0-14 Kg/cm2 with syphon and cock.

154 Expln. (MAKE:- BAUMER / H.GURU / EXCEL) 2.00 1864.41 Nos. ₹

Providing and fixing of rubber bellow with ms flanges, gi nut,

gi bolt, gi waser & rubber gasket etc. Complete as required

(MAKE:- EASYFLEX)

(a) 150 mm nominal dia 0.00 15254.24 No. ₹

(b) 100 mm nominal dia 2.00 11440.68 No. ₹

Self (c) 80 mm nominal dia 0.00 9067.8 No. ₹

155 Expln. (d) 50mm dia 0.00 8220.34 No. ₹

Providing fixing testing and commissioning of Gun metal

Four way fire brigade inlet as per IS:904 having 63mm dia

inlet with blank cap and chain with necessary fittings

Self flanges,nut bolts.etc.

156 Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX/SWATI) 0.00 6610.17 Nos. ₹

Providing fixing testing and commissioning of Gun metal Two

way fire brigade inlet as per IS:904 having 63mm dia inlet

with blank cap and chain with necessary fittings flanges,nut

Self bolts.etc.

157 Expln. (MAKE:NEWAGE/AAG/ESSEL/SAFEX/SWATI) 0.00 4745.77 Nos. ₹

Providing & Fixing of M.S. Structural work fabricated from

standard sections, (MS rounds, angles, channels etc)

Self including cutting, drilling, welding, including cost of fasteners

Supplying & erecting carbon dioxide (CO2) fire extinguisher

user of following capacity with necessary clamps made from

Self 50 x 6 mm M.S. IS

159 Expln. (MAKE:KANEX/SAFEX/SECURE ZONE)

(a) 4.5 Kg Capacity 12.00 8127.12 Nos. ₹

Supplying & erecting ABC powder type Fire extinguisher as

per IS 4308 with necessary clamp for erection on wall.

160 50 (MAKE:KANEX/SAFEX/SECURE ZONE)

(b) 6 Kg Capacity 12.00 3059.33 Nos. ₹

Self Modular type automatic fire extinguisher :-

161 Expln. (MAKE:KANEX/SAFEX/SECURE ZONE)

(a) 5KG CAPACITY 2.00 2966.11 Nos. ₹

Supplying FIRE bucket round bottom of 9 ltr. capacity made

out of 24 gauge G.I. sheet with extra handle at bottom duly

painted white inside and Red out side with FIRE mark, filled

Self with dry-sand and kept on existing stand provided or hung on

162 Expln. wall hook 3.00 350 Nos. ₹

Supply, installation, testing and commissioning of standard

response quartzoid bulb type sprinkler with screwed end

connection. Sprinklers shall be ul listed / fm approved with

15MM DIA - RATING 68 DEGREE (PENDENT TYPE) 600.00 398.31 Nos. ₹

Self 15MM DIA - RATING 68 DEGREE (UPRIGHT TYPE) 0.00 398.31 Nos. ₹

163 Expln. 15MM DIA - RATING 68 DEGREE (SIDEWALL TYPE) 0.00 398.31 Nos. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

SPRINKLER ALARAM VALVE

(MAKE:SANT/ZOLOTO/NORMEX/AUDCO/HD/TYCO)

Providing & Fixing of single side printed Night Glow ( Glow in

Dark ) Safety Signage, MMD certified IMO signs, printed on

PVC sticker sheet and pasted on 5 mm. thick PVC foam

Self sheet of "Autoglo" make or approved equal brand, etc.

165 Expln. complete. 2000.00 6.78 Sq.Inch ₹

Fire Detection System

SUPPLY & INSTALLATIONS FIRE ALARAM CONTROL PANEL

(MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI)

(a) 2 ZONE Fire Alarm Control Panel 0.00 21355.94 Nos. ₹

(b) 4 ZONE Fire Alarm Control Panel 0.00 46779.67 Nos. ₹

Self (c) 2 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL 0.00 101694.92 Nos. ₹

166 Expln. (d) 4 LOOP ADDRESSABLE TYPE FIRE ALARM PANEL 1.00 190677.97 Nos. ₹

Self Smoke Detectors

167 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 5.00 2177.97 Nos. ₹

168 Expln. Addressable Multisensor Detector With Base (Optical/thermal) 60.00 2415.26 Nos. ₹

Self Manual Call Point

169 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 0.00 3271.19 Nos. ₹

Self ADDRESSABLE TYPE MANUAL CALL POINT WITH BASE

170 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 9.00 3559.33 Nos. ₹

Self Sounder Cum Hooter

171 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 9.00 1322.04 Nos. ₹

172 Expln. ADDRESSABLE TYPE SOUNDER STROBE WITH BASE. 0.00 6762.72 Nos. ₹

Self ADDRESSABLE TYPE FAULT ISOLATOR WITH BASE.

173 Expln. (MAKE:SYSTEM SENSOR BY HONEY WELL/APOLLO/AGNI) 1.00 3084.75 Nos. ₹

Self 2 Core 1.5 Sq. MM FRLS Cable

174 Expln. (MAKE:- POLYCAB/RR CABLES/FINOLEX/HAVELLS/KEI) 1200.00 101.7 Nos. ₹

175 Expln. 25 MM PVC Conduit 0.00 29.67 RMT ₹

176 Expln. Cable Laying Charges 1200.00 21.19 Nos. ₹

177 Expln. Conduit Laying Charges 0.00 16.95 RMT ₹

Testing of Fire Fighting System, Preparation of Design &

Drawings Approval of Fire Hydrant & Entire Fire Protection

System from Local Fire Authority and any other relevant

statutory authority at initial (PRE- NOC / OPINION) and

POST CONSTRUCTION NOC or at various other stages of

work, including preparation of report / drawings as per fire

authority requirement. for pre opinion lison charges to be

given to indharge consultant. Contractor shall include cost of

all liason work which are not explicitly mentioned above but

are mandatory to have fire authority approval (any statutory

charges will be paid extra).

Self (Including Pre-NOC and Post Construction NOC from Fire

178 Expln. authority) 1.00 65000 Per Job. ₹

PART 04:- AREA DEVELOPMENT (EXTERNAL)

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

179 1 (1) Up to 1.5 Mt. depth

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc. Comp.

(A) Loose or Soft soil

Executed With Manual Labours

180 2 (1) Up to 1.5 Mt. depth

Box Cutting the road surface to proper slope and camber

for making base includinng removing the excavated stuff and

Self depositing on the road side slope as directed up to 50 mt.

181 Expln. lead.

Self Add extra for Disposing off the excavated stuff of above

182 Expln. items for lead of (A) 50 m to 100 m

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse

sand:8 graded stone agg. 40 mm nominal size) & curing

comp. excl.cost of form work in

183 4 (A) Foundation and Plinth

Providing & laying Granular sub base (GSB) confirming to

Grading-V of Table 400.0 of compacted thick of 150mm with

specified graded stone metal and sand mixed in place and

laid with mechanical means spreading with motor grader and

compacting with vibratory roller having minimum 80-100 KN

static weight to acheve desired density of 98% of MDD

including all material, labour, machinery with all leads and lift

184 101 etc. complete.

Providing & laying cement concrete Pavement using 1:1.5:3

(1 cement:1.5 sand:3 graded stone agg. 20 mm nominal

size) & Vaccuum Dewatering technique including floating

185 92 surface with a skim powder floater, curing etc. complete.

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

for R.C.C. work incl. bending, binding & placing in position

186 10 etc. comp. Upto G.L./P.L.

Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having

60mm thickness (M-35) purchased from SMC's approved

paverblock manufacturer only & fixing of fine sand bedding.

Item includes levelling by using vibratory plates compacted

machine. Item also includes all materials, labour,

equipments, tools, plants, watering, cleaning etc. complete.

187 103 With / Without Color

Providing 100mm thick readymade C.C. kerb of strength M-

20 (size 300mm x 380mm) purchased from SMC's approved

paverblock manufacturer & setting in line, level and in truly

vertical position, including filling joints in C.M. 1:1 (1 part of

cement : 1 part of stone dust) smooth pointing in C.M. 1:1 (1

part of cement : 1 part of coarse sand) including watering etc.

188 105 complete and as directed by engineer in charge.

Earth work for embankment including breaking clods,

dressing with all lead and lift and including watering rolling

and consolidation of subgrade in layers at O.M.C. to required

dry density including filling the depression which occur during

Self the process using power roller 8T to 10T.

189 Expln. (E) From Borrow area within 3.0 KM. lead

Filling in foundation and plinth with murrum or selected soil

in layers of 20cm. thickness including watering, ramming

190 13 and consolidating etc. complete.

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint, burshing

to give an even shade including cleaning the surface of all

191 44 dirt, dust and other foreign matters.

Providing and laying 200 micron plastic sheet on prepared

192 102 sub base For V.D.S Concrete

Cutting of Groove 5 to 7 mm thick in VDS for depth 1/3 of

Self total thickness with filling of epoxy sealent as directed by

193 Expln. engineer in charge

PART 05: INTERIOR FINISH & ACOUSTIC WORK

5.01: FALSE CEILING WORK

ACOUSTICAL CEILING WORKS @ FIRST FLOOR

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

providing & Fixing of Concealed / Microlook / Teguler edge

glassfibre core fully encapsulated ceiling tile in matt white

color of size 595mm x 1195 x 20mm having volume density

120Kgs/m3, weight 2.4kg/m2 which are suspended by using

0.3mm thick T24 T Grid framework. A wall angle with equal

flanges of 24mm, length 3000mm,0.4mm thk, fixed along the

perimeter of walls with the help of nylon sleeves and suitable

fasteners at 300mm centers. Then suspend the MainT with

flange width 24mm, height 38mm and length 3000mm, from

the soffit slab with help of soffit cleat and wire rod with

leveling clip at 900mm centers. A Spacer Bar, 800mm length,

with pre notched slots is placed above Main T24 at 1200mm

centers in staggered pattern to hold system. Concealed edge

of size 600x1200x20mm shall then be slided onto Main T24

Self such that short edges are staggered. 1185.00 6090 Sq. Mt. ₹

Explai Approved Make : Saint Gobain, Knauf, Gyptech, Amazone or

194 ned approved equal.

ACOUSTICAL CEILING WORKS @ FIRST FLOOR STAGE

providing & Fixing of Concealed / Microlook / Teguler edge

glassfibre core fully encapsulated ceiling tile in matt black

color of size 595mm x 1195 x 20mm having volume density

120Kgs/m3, weight 2.4kg/m2 which are suspended by using

0.3mm thick T24 T Grid framework. A wall angle with equal

flanges of 24mm, length 3000mm,0.4mm thk, fixed along the

perimeter of walls with the help of nylon sleeves and suitable

fasteners at 300mm centers. Then suspend the MainT with

flange width 24mm, height 38mm and length 3000mm, from

the soffit slab with help of soffit cleat and wire rod with

leveling clip at 900mm centers. A Spacer Bar, 800mm length,

with pre notched slots is placed above Main T24 at 1200mm

centers in staggered pattern to hold system. Concealed edge

of size 600x1200x20mm shall then be slided onto Main T24

Self such that short edges are staggered. 565.00 6438 Sq. Mt. ₹

Explai Approved Make : Saint Gobain, Knauf, Gyptech, Amazone or

195 ned approved equal.

Self FALSE CEILING : PLAIN GYPSUM CEILING

Explai Providing & Fixing of 1800 mm. x 1220 mm. x 12.50 mm.

196 ned thick MR / Plain Board Gypsum using 80 mm x 26 mm. x 735.00 1001 Sq. Mt. ₹

Self ACOUSTIC LAY IN GRID CEILING

Explai Gypsum Plaster Board Perforated Acoustical Panels

197 ned Providing and fixing of GYPTECH Perfona -G for Ceiling and

PVC LAMINATED GYPSUM LAY IN GRID CEILING

Providing and fixing in true horizontal level 600 mm. x

mm. false ceiling in 24mm C.B Grid system manufactured by

GYPTECH using hot dipped galvanized steel section,

exposed surface with pre-coated capping, main tee of size

24mm x 32 mm., having 0.30 mm gauge at every 1200 mm.

center to center maximum and rotary stitched cross tee of

size 24mm x 26 mm, having 0.30 mm gauge at every

mm. c/c. and sub cross tee of size 24mm x 26 mm, having

0.30 mm gauge at 1200 mm c/c. and wall angle of size

24mm x 24mm., having 0.40 mm gauge fixed to the

periphery of the wall. The above grid is suspended at every

1200mm c/c. in both directions using (Ceiling Angle)19mm

x19mm 2.0 mm. thick pre-straightened GI wire laying

GYPTECH VINYL LAMINATED GYPSUM PANEL Square

Edge ceiling tiles manufactured by GYPTECH, of size

mm x 595 mm x 12 mm thermal conductivity k = 0.16 W/m.K,

having moisture resistant & fire protection. having

lighter,smoother and more uniform. The vinyl finish on the

gypsum panels seals out moisture, bacteria, dirt and odors.

Lay in the modulus for the flush look. Approved Brands :

Self Saint Gobain Gyproc, Gyptech, Armstong or approved equal. 200.00 1251 Sq. Mt. ₹

Explai Approved Brands : Saint Goabin Gyproc, Gyptech, Knauf or

198 ned approved equal.

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Trap Doors:Providing and fixing of TRAPDOOR for AC

units using TWO SHUTTERS OF 25mm flush door( Made

from pine framing AND AS PER DETAIL) for shutter &

mm ply for framing and vertical support (AS PER

DRAWINGS) of brand Greenply or equivalent etc,ghana

wood beading patti etc. including all hardware items like

nos alllenkey lock ,stopper, hinges, groove (if shown) with all

materials, labour, lead and wastage etc. complete. And

Finished with different materials,and complete the work

Self satisfactorily as per instruction of architect or Engineer-in

Explai charge.(BASIC AREA OF TRAP DOOR is 3.00 m. x 1.50 m.

199 ned (As per Dwg.) = 4.50 sq.m.

Providing & Fixing of GI Microlook Lay in Plain metal ceiling

consisting of 600x600mm Lay-in tiles of galvanized steel in

Perimeter trim to be Armstrong wall angles of size

3000x19x19mm, secured to walls at 450 mm maximum. In

case of end tiles lesser than 600mm, use Armstrong lay-in

end cap for installation to have a Microlook effect on

Installation to be carried out by Armstrong Trained

Installation team & Installation should be carried out as per

Armstrong recommended procedure.

ARMSTRONG SUSPENSION SYSTEM accessories

manufactured and supplied by Armstrong World Industries

consisting of M6 Anchor Fasteners with hanger hole, pre

Straightened Hanger wire of dia – 2.5 mm of 1.80 m length

having a tensile strength of 344-413 MPa and a minimum pull

strength of 110 kgs. (Adjustable hook clips of 0.7mm thick,

galvanized spring steel can also be used for installation

Self purpose as an additional accessory. The adjustable clip also

Explai consists of a 4 mm aquiline wire to be used with the main

200 ned runner). 130.00 2369 Sq. Mt. ₹

Plywood Framing / Backing on the edges of the Openings

in Ceiling for fixing of Lighting Fixtures:

Providing & fixing 12 mm. thick BWR-IS: 710 as backing /

packing around openings of various fixtures in the ceiling &

supported and fixed with plywood battens with hardware as

per design & details or as instructed by the Engineer-in-

Self Charge, at ceiling level or on wall as directed, including

Explai removing debries and making the site clear and clean, etc.

201 ned complete.

Above ceiling ply box for 4 way AC fitting:

Providing and fixing 1.0 x 1.0 mtr. of ply box above ceiling

(AS PER DRAWINGS) using 18 mm ply for framing and 25 x

50 mm aluminium pipe etc. including all hardware item, with

all material, labour, lead, scaffolding and wastage etc.

Explai Asymmetrically Structured Absorber (ASA) Acoustical Foam

202 ned Panels - Pyramids / Wedges:

Thermo Acoustic Rock Wool Insulation:

Providing & fixing 50 mm. thick thermo acoustic 1000 X

mm." ROXUL" rock wool sheet, having 48 kgs. / m3 density,

with aluminium foil backing, resistant to moisture fungus &

insects, tie-up to the frame with g. i. binding wire, at ceiling /

wall in sheet / roll / blanket foam of selected standard

Self approved quality as approved by the Engineer-in-Charge, laid

Explai as per details, including removing debries and making the

203 ned site clear and clean, etc. complete.

5.02: Wall Panelling Work

Acoustical Wall Paneling

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & fixing in true line level 1200mm x 2400mm x

10mm thick cnc harmonised perforated organic fibre and

natural mineral composite acoustical panel with 25mm

drywall screw fixed at 230mm centers to surface ribbed GI

cold rolled section channel of 120 micron zinc coating

0.5mm thick having knurled edge of 51.5mm and two flanges

of 26mm each with lips of 10.5mm placed at 610mm center,

surface ribbed GI cold rolled perimeter channel of 120 micron

zinc coating 0.5mm thick having two flanges of 20mm &

30mm and web of 26mm fixed to the floor and surface ribbed

GI cold rolled Intermediated channel 120 micron zinc coating

0.5mm thick. The cavity to be filled with 48kg/M3 density

50mm thick rockwool insulation. It shall be lightweight, non-

corrosive, chemically inert, odorless, does not encourage

growth of fungi & vermin, complying highNRC & STC values

for effective acoustic insulation. It should minimize energy

loss, cooling load and operating cost for air conditioned

building. All combination to be fixed firmly as per

manufacturer’s standard and provided lay out, including all

accessories, material & labor complete as directed by

Self Architect / Engineer – in – charge.

Explai Approved Brands : Saint Goabin Gyproc, Gyptech, Knauf or

204 ned approved equal. 1472.00 4360.00 Sq. Mt. ₹

Acoustical Wall Paneling

Providing & fixing in true line level 1200mm x 2400mm

x10mm thick CNC grooved acoustical panel in grdiant pattern

only. The panel to be made from 2000g/m2 density 100%

polyester staple fiber, resistance to shrink, stretch,

chemicals, mildew/fungus, abrasion, should be comply with

fire classification B-S1, d0 as per EN - 13501, NRC Value up

to 0.90 as per ARAI.It should be a green material with

asbestos-free, non-toxic and tasteless gas under extreme

temperature, protecting the ozone layer, non-irritant and

recyclable. Good insulation properties, to prevent transmitting

the heat from outdoor to indoor directly as partition or and

ceiling, saving 35% of energy, extending the life of air

conditioning.including all acceessories, material, labour etc.

and complete the work satisfactorily as per instruction of

architect or Engineer-in charge. (Basic rate of PANEL-170

Self rs/sq.ft.)

Explai Approved Brands : Artois,smart pannel,senses akustik,

205 ned Techno Acoustics or approved equal. 1472.00 ₹ 5,517.00 Sq. Mt. ₹

Providing and fixing loop pile carpet of pile fiber: 100% Bcf

Polypropliene/olefin Yarn Construction & Type: Solution

Dyed, Loop Pile Graphic. Pile Weight & Hight: Minimum

Gm/Sq.Mt, 5mm (5 %+/-) Backing: Action Back Moth

Proffing. Fixing on the floor with synthetic ruuber adhesive

Self make nerolac/ pidilite including all accessories, material &

Explai labor complete as directed by Architect / Engineer – in –

206 ned charge. Approved Make : Unitex / Divine / Hego ) 701.00 ₹ 2,600.00 Sq. Mt. ₹

Flocked carpet at Hall Flooring: Providing & Fixing of

Flocked Carpet Rolls "Flotex" by Forbo or approved equal

make with design & colours as per design drawing and

selection by Architect, having a density of more than

million fibres of nylon 6.6 per S.M. and thickness 4.3 mm (as

per ISO 1765) and roll width 2.0 m, roll length:30 m, firmly

anchored into a waterproofing backing and having average

recycled contents of 20% by weight. The flocked carpet must

inhibit the growth of Bacteria and Fungi.Azofree - Non-

hazardous ( Natural ) Dyes for Moth proofingThe Flocked

carpet must be ZERO EMISSION Carpet (Emission below

detection limit after 28 days in accordance with ISO 16000-9

requirements. The flocked carpet must carry a seal of

approval from British Allergy Foundation for reducing the

Self growth of dust mite populations.

Explai Fire Test EN-13501, Appearence Retention Hexapod ISO

207 ned 140-8, Friction Slip Resistance Test EN 14041 Class DS, 0.00 ₹ 5,512.00 Sq. Mt. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Wooden Panelling:

Providing and making of panelling on Wall & columns using

12mm ply, aluminium pipe for (2" x 1") framing(minimum grid

size of 600 mmx 600mm ), Ghana bidding patti (11/2" x

3/4")including all material, labour and hardware

complete,including scaffolding as per instruction of architect.

Self And Finished with different materials,and complete the work

Explai satisfactorily as per instruction of architect or Engineer-in

208 ned charge. 300.00 ₹ 1,975.00 Sq. Mt. ₹

Finished with Laminate:

Providing and fitting of 1 mm laminate (as per drawing &

selection) of brand greenlam,merinolam,century etc on ply

partition with 25 mm x 20 mm teakwood beading patti design

on top as per drawing,and 3mm x 3mm grooves if shown, all

material, adhesives,polish work,labour and hardware, waste

of materials complete as per instruction of architect.[Basic

Self Rate of Laminate : 2000rs./sheet (8' x 4')] and complete the

Explai work satisfactorily as per instruction of architect or Engineer-

209 ned in charge. 110.00 ₹ 1,198.00 Sq. Mt. ₹

Finished with Softboard:

P & f 12 mm. thick soft board, finished with fabric/s of

selected color, finish, texture, make, etc., having basic rate of

Rs. 115.00 per meter of 1,200 mm. wide boards, and framed

Self with teak wood border, fixed on wall &/or already installed

Explai base paneling with cap screws, including removing debries

210 ned and making site clear and clean, etc. complete. 18.00 ₹ 4,520.00 Sq. Mt. ₹

Finished with Veneer:

Providing and fitting of Veneer of brand

green,decowood,century etc,(as per drawing & selection) on

ply panelling with 25 mm x 20 mm teakwood beading patti

design on top as per drawing,and 3mm x 3mm grooves if

shown including all material, labour,polish work and

hardware, waste of materials & finished by ICA Clear PU

Self (Basic Rate of Veneer : 150 rs./sqft.)and complete the work

Explai satisfactorily as per instruction of architect or Engineer-in

211 ned charge. 100.00 ₹ 5,537.00 Sq. Mt. ₹

Finished with Mirror:

Providing and fitting of mirror/glass having thickness of min.

5 mm (as per drawing & approved shade)of brand

ais,modiguard,etc on ply panelling / on tile cladding including

Self all material, labour and hardware, waste of materials and

Explai complete the work satisfactorily as per instruction of architect

212 ned or Engineer-in charge. 60.00 ₹ 2,309.00 Sq. Mt. ₹

Finished with Tinted Mirror

(5mm thick Brown / Black Mirror Providing and fitting of

mirror/glass (as per drawing & approved shade)of brand

ais,modiguard,etc on ply panelling / on tile cladding including

Self all material, labour and hardware, waste of materials and

Explai complete the work satisfactorily as per instruction of architect

213 ned or Engineer-in charge. 50.00 ₹ 2,853.00 Sq. Mt. ₹

Finished with Wall Paper:

Providing & Supplying of WALLPAPER as per selection of

Self approved brand selected by the architect and complete as

Explai per selection & directed by the Architect and approved by the

214 ned Engineer in Charge.basic rate of wall paper is 150 / sq ft. 75.00 ₹ 2,405.00 Sq. Mt. ₹

PART 5.03: SECURITY SYSTEM

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Walk Through Metal Detectors:

Providing & fixing 6 mutual overlapping zones, Walk Through

Standard Metal Detectors, bearing model no."D1065S" by "ESSL",

having high density fireproof material & modular design, auto

calibration with self diagnostic program, having simultaneous alarm

from multi zones, with 100 sensitivity adjustable levels, having both

sound & LED alarm, LED indicators on both sides, automatic

counting of persons passing thru and alarm times, alarm strength

indicator on control panel, protected by password for operation,

Self harmless to human body magnetic floppies, recording tapes, etc.,

Explai or approved equal make as per the list of approved brands, as

215 ned approved by the Engineer-in-Charge, etc. complete. 2.00 ₹ 84,440.00 Nos. ₹

Providing & installing Sensor Barriers, bearing model MTS-ESS-2 /

MTS-ESS-2D by "Motawame" or approved equal, of size 1150 X

X 1000 mm wide lane & Passage clearance 520 mm, requiring

power consumption of standby <30 W and operating <80W, having

drive Brushless DC motar / Inline direct Drive, configuration of fail

safe / fail lock and access time out adjustable to 1-10 sec. Two Flap

wings shall be made with Acrylic / Glass, having MCBF 10 million

cycles, MTTR <30 min and opening, closing time of 0.8 sec which is

Self adjustable as per the requirnment. Case Work shall be of Stainless

Explai steel 304 / 316* / M.S. powder coated. The product shall be IP32 /

216 ned IP54* rated, having the weight of 100 kg. 4.00 ₹ 5,19,029.00 Nos. ₹

PART 5.04: BLIND / CURTAIN SYSTEM

217 Explai Providing and fixing Fabric Roller blinds SW 2410 of SUNBLOCK™ 75.00 ₹ 1,669.00 Sq. Mt, ₹

02-Hour Fire Rated Acoustical Doors with Frame, with D Handles

and Powder Coated:

Providing and fixing of Medium duty Shakti Hormann accoustic

door as per IS 16074 & IS 4351 made of pressed galvanized steel

confirming to IS 277 with the following specification. Door shall be

suitable for 39db, STC rating.

Door frame shall be single rebate step grooved profile of size 125 x

55mm made out of 1.20mm (18gauge) minimum thick galvanized

steel sheet. Frames shall be mitered and field assembled with self

tabs. Frames to have inbuild grooved sealing system and shall be

site fitted with EPDM gasket as standard. All provision should be

mortised, drilled and tapped for receiving appropriate hardware.

seal of approved make Athmer/Legancy to be provided on all three

sides of the frame jamb.

Frames should be provided with back plate bracket and anchor

fasteners for installation on a finished plastered masonry wall

Door leaf shall be 46mm thick step design fully flush double skin

door, insulated without vision lite. Door leaf shall be manufactured

from 0.8mm (20guage) minimum thick galvanised steel sheet. The

internal construction of the door should be rigid reinforcement

pads for receiving appropriate hardware. The infill material shall be

Min.100kg/sq.mt. high density rockwool/mineral wool material. All

doors shall be factory prepped for receiving appropriate hardware

and provided with necessary reinforcement for hinges, locks, and

door closers. The edges should be interlocked with a bending

radius of 1.4mm. For pair of doors integrated astragals has to be

provided on the meeting stile for both active and inactive leaf. Door

shall be equiped with additional seals like auto door bottom or

Rebatted threshould hormann make

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Door and frames shall be finished Pure Polyster Powder coated and

shall have passed minimum 500 hours of salt sprey test.

Rate shall include supply and installation of frame,shutter as a

complete assembly as mentioned in the door and hardware

All hardware, Smoke seals & glass including tapes cost will be paid

extra as per the hardware schedule.

Hinges, Lever handle b/b, sash Lock, Cy.Keyx TT ,Parrellel Arm DC

(hold open) , With smoke seal, Rebated Threshould all hormann

Approved Makes : Shakti, Hormann, Godrej, Accodor, Metaflex or

Explain Double Leaf Door 4.00 ₹ 1,05,046.00 Nos. ₹

218 ed Single Leaf Door 4.00 ₹ 54,382.00 Nos. ₹

PART 5.06: READY-MADE FURNITURES

Manager's Table with Storage :

Providing and fixing of Manager's table including side table

and back storage with min. 6 nos of drawers, min. 10 nos. of

Shutters as per drawings and instructions provided, using ply

of brand greenply ecotech mr, century sainik mr, archidply

etc., aluminium pipe for framing and finishing it with 6 MM

CORIAN of brand granium, samsung, dupont and 1mm

unicore laminate and 4mm veener as selected with clear pu

finish of ica brand selected by the architect (basic rate of

unicore laminate is 3000 per sheet and other 1mm laminate

is 2000 per sheet, of size 8'0 x 4'0 and veener is 150 Rs per

sq ft). All drawers and shutters to be equiped with Godrej

made loacking system, Black color anodized aluminum 'F'

profile handle including all material, m.s fabrication

Work,labour and hardware, waste of materials etc. and

Self complete the work satisfactorily as per instruction of Architect

Explai or Engineer-in charge. (APPROX RUNNING LENGTH OF

L" Type Table for All Department Workstations (1.80 X

Providing and fixing of L-TYPE office table of size 1.80 x

mt and side storage of width 0.60 mt as per drawings and

instructions provided,using ply of brand greenply ecotech

mr,century sainik

mr,archidply etc,or aluminium pipe for framing and finishing it

with 1 mm unicore laminate and 1mm laminate of brand

greenlam or selected

by the architect (basic rate of unicore laminate is 3000 per

sheet and other 1mm laminate is 2000 per sheet, of size 8'0

x 4'0) including all material, m.s fabrication work,labour and

hardware, waste of materials etc and complete the work

Self satisfactorily as per instruction of architect or Engineer-in

Explai charge.Approved Brands: Unimaple,

220 ned Featherlite, Bristol, Sunon, Steelcase. 6.00 ₹ 45,500.00 Nos. ₹

"L" Type Table for Ticket Office Manager (1.80 X 0.80)

Providing and fixing of L-TYPE office table of size 1.80 x

mt and side storage of width 0.60 mt as per drawings and

instructions provided,using ply of brand greenply ecotech

mr,century sainik

mr,archidply etc,or aluminium pipe for framing and finishing it

with 1 mm unicore laminate and 1mm laminate of brand

greenlam or selected

by the architect (basic rate of unicore laminate is 3000 per

sheet and other 1mm laminate is 2000 per sheet, of size 8'0

x 4'0)including all material, m.s fabrication work,labour and

hardware, waste of materials etc and complete the work

Self satisfactorily as per instruction of architect or Engineer-in

Explai charge. Approved Brands: Unimaple, Featherlite, Bristol,

221 ned Sunon, Steelcase. 2.00 ₹ 52,000.00 Nos. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Ticketting Counter at TICKET OFFICE :

Providing and fixing of Table / Desk for Ticketting counter

(Min. 3.0 x 0.60 mt size- Linear / 'L' Shape) with Cut outs for

inbuilt PC Screen and 6mm. thk. Glass for viewing, and

under desk storage as per drawings and instructions

provided, using 18 mm. thk. of brand greenply ecotech mr,

century sainik mr, archidply etc, aluminium pipe for framing

and finishing it with 6 mm. Thk. CORIAN of brand granium,

samsung, dupont and 1 mm unicore laminate or veneer of

brand greenlam or selected by the architect (basic rate of

unicore laminate is 3000 per sheet of size 8'0 x 4'0) including

Self all material, labour and hardware, waste of materials etc and

Explai complete the work satisfactorily as per instruction of architect

222 ned or Engineer-in charge. 1.00 ₹ 1,54,168.00 Nos. ₹

Executive Steel Filing Cabinet Table :

M.R. Providing 465 mm. long x 625 mm. wide x 725 mm.

high Executive Steel Filing Cabinet Table by "Jalaaram

Self Furniture" or approved equal

Explai make & as per the list of approved brands, as approved by

223 ned the Engineer-in-Charge, etc. complete. 6.00 ₹ 13,536.00 Nos. ₹

Readymade Side Tables:

14.k.i. M.R. Providing 600 mm. X 450 mm. / 600mm. X

Self mm. Side tables by "Gulmahor Lane, Joshmo, Steelcase,

Explai Godrej",, or approved equal make as per the as per selection

224 ned by the architect. 4.00 ₹ 9,848.00 Nos. ₹

Providing 900 mm. Long x 600 mm. wide x 455 mm. high

readymade center tables at VIP Room by "Gulmahor Lane,

Self Joshmo, Steelcase, Godrej", or approved equal make as per

Explai the list of approved brands, as approved by the Engineer - in -

225 ned Charge, etc. complete. 1.00 ₹ 19,695.00 Nos. ₹

Providing 750 mm. Diameter x 450 mm. / 750 x 450 mm

Self rectangle high readymade center tables by "Gulmahor Lane,

Explai Joshmo, Steelcase, Godrej", as per selection by the

226 ned architect. 2.00 ₹ 15,756.00 Nos. ₹

Openable Cupboard in Green rooms:

Providing & fixing Openable Cupboard with hanger system

and drawer as per design & details, using 19 mm. thick &

mm. Thk. as specified MR grade plywood of approved quality

and brand as per the list of approved brands, as approved by

the Engineer-in-Charge, with 950 mm. long, 20 mm. dia. s. s.

curtain rods with cup clip for hanging system, 01 No. sleeve,

01 No. 300 mm. wide drawer with lock, all internal surfaces

finished with wood primer and synthetic enamel paint of

selected color and quality, all external surfaces finished with

selected color, texture finish laminates, of approved quality

and brand, as per the list of approved brands, as approved

by the Engineer-in- Charge, with 04 nos. 100 mm. long brass

hinges per shutter, 125 mm. long cupboard handle, cupboard

lock and required hardware as per design & details, including

removing debries and making the site clear and clean, etc.

complete. At Green Rooms and Rehearsal Rooms, as per

Self design & detail, etc. complete.

Explai Basic rate of Inside Laminate : 22 rs./sq.ft. & Outside

227 ned Laminate : 75 rs./sq.ft.) 8.00 ₹ 14,110.00 Nos. ₹

Providing and fixing 1 / 2 / 3 - seater sofa sets,as per

drawings or selection using base WHITE ASH WOOD for

framing with molded foam,and high density foam warwick

brand rexine (as per architects selection) in sofa upholstery

and Teak Wood legs with 5 years warranty and instructions

Self provided, and ,and complete the work satisfactorily as per

Explai instruction of architect or Engineer-in charge.

228 ned BASIC RATE : Rs. 8000 / R.FT.

1,200 mm. long x 1,000 mm. wide one-seater sofa: 2.00 ₹ 36,000.00 Nos. ₹

2,000 mm. long x 1,000 mm. wide Two-seater sofa: 2.00 ₹ 67,200.00 Nos. ₹

2,700 mm. long x 1,000 mm. wide Three-seater sofa: 2.00 ₹ 90,000.00 Nos. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

High-back Chairs : Manager

Providing and fixing of highback office chair of aluminium dia

cast base and armrest,50 density high mould foam in seat

and back, multi funtional mechenism, bifma class IV gas lift

and p.a castors. Liven HB Chair, Backrest and headrest shell

finish in high gloss black, Headrest height can be adjusted,

Armrest pad finish in polish finish, Armrest height and width

can be adjusted, backrest and seat cushion in single-stitched

semi-aniline artificial leather, Seat shell finish in high gloss

black, Seat depth and height of sitting can be adjusted,

Mechanism cover in silver smooth powder coating. as per

selection and complete the work satisfactorily as per

Self instruction of architect or Engineer-in charge.Basic rate of

Explai chair is 40000/- per chair BRANDS : BRISTOL LIVEN,

229 ned HAYWORTH, STEELCASE. 1.00 ₹ 45,000.00 Nos. ₹

Low-back Chairs : Staff, Visitors, Inside Hall

Providing and fixing of mid back office chair of good quality

Curved fiber and nylon body with adjustable lumber support,

Reinforced mesh & knee tilting mechanism, fixed arms,

prong nylon base, PU/rubber double castor as per selection

and complete the work satisfactorily as per instruction of

Self architect or Engineer-in charge.Basic rate of chair is Rs.

Explai 7000/- per chair BRANDS : BRISTOL, COHUMAN STORM

230 ned FIX CHAIR ,Sunon, Featherlite, Steelcase... 15.00 ₹ 8,500.00 Nos. ₹

Pedestral Under Counter:

M.R. Providing 400 mm. long x 450 mm. wide x 640 mm.

Self high Pedestal Under Table by "Featherlite" or approved equal

Explai make & as per the list of approved brands, as approved by

231 ned the Engineer-in-Charge, etc. complete. 5.00 ₹ 7,788.00 Nos. ₹

Dressing Table Counter :

Providing and fixing of Dressing Counter table for Green

Rooms as per drawings and Instructions provided, using

mm. thk. ply of brand greenply ecotech mr,century sainik mr,

archidply etc, aluminium pipe for framing and finishing it with

6 mm. CORIAN counter top of brand

granium,samsung,dupont and 1 mm inner laminate of brand

greenlam or selected by the architect (basic rate of inner

laminate is 1700 per sheet of size 8'0 x 4'0) including all

Self material, labour and hardware, waste of materials etc and

Explai complete the work satisfactorily as per instruction of architect

232 ned or Engineer-in charge. 9.00 ₹ 34,641.00 Sq. Mt. ₹

Providing and fixing of approved quality fabric of

premium grade BLACK OUT CURTAIN fixed to Curtain

channel by "Toso" or approved equal, made of extruded

aluminium alloy an Idler, Insert Type- Brackets, PVC chain

etc. all complete as per approved specification. The curtain

fabric should have specific low emissivity treatment and lead

free with Greenguard gold certification with antimicrobial

properties preferably with Microban. The fabirc should be

Flame retardant.,including all accessories, material,

labour,installation etc..and complete the work satisfactorily as

Self per instruction of architect or Engineer-in charge. (Basic rate

Explai of Curtain

PART 5.07:AUDITORIUM CHAIRS

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Standard Heavy Duty Auditorium chairs (Fix, auto tip up type)

Structural Frame: Back Rest frame should be of Mild Steel of size

X 3 mm flat bend as per ergonomic contour “S “bend to suit the

body shape. Seat frame should be of Mild Steel of size 20 X 5 mm

flat “C “bend type. Note: In main load bearing structure, no wood

based frame is permitted. Leg should be made of Sq. tube IS: 4923-

1997- 50 X 25 mm, 1.63 thickness. Also, its side panel

SPRINGS: For Tip up mechanism, Coil Spring / Spring Steel IS:

1981 GRADE 2 Tested for 1,00,000 Cycles. Flexible PU FOAM:

Automotive Grade High Resilience-HR Polyurethane foam having FR

Grade with density of 48 ± 5 kg / M3. As per JIS K 6401.Thickness

Cushion: 130 +/- 20 mm tolerance; Backrest: 80 +/- 10 mm

tolerance. Hardness: Cushion: 120 (+ 30 / - 20) Newton; Backrest:

PLASTIC TRAY: The seat & back frame should be nicely cover with

PPCP tray with 2.0 to 3.0 mm minimum wall thickness. It should

comply to sound acoustic properties. The seat numbering shall be

carried out on the back and the tip-up portion for the seat as

specified. End stand shall be covered by is covered with 6 mm

plywood with fabric lamination to conceal functional parts, and

Numbering of the row shall be carried out along the aisles as

ARM REST: PPCP with Cup holder OR PPCP without cup holder or

Wooden w/o cup holder as per selection.

Size & Weight of Chair: Length 750mm, Height 925mm, Seat height

450mm+_ 10mm,Whole Seat weight 15kg to 17kg, Seat depth is

448mm.Height from ground level is 445+/-10mm. Seat width is

457mm, 2 Nos per stand of size - M 8 X 75 mm expandable anchor

fasteners with chemicals bond grouting.

FABRIC: Heavy duty 100 % polyester dyed yarn with 3 mm ±

mm foam backing with FMVSS 302 STANDARD.

Fabric and color shall be finally decided after approval of samples.

Explain Warranty shall be of minimum 36 months from the date of

234 ed commissioning against manufacturing defects. 1201.00 ₹ 8,905.00 Nos. ₹

PART 5.08: MISC. WORKS.

Providing & Fixing Commercial grade RAC Recessed Air

Curtain - Model no. " RAC 5" by Euronics or approved equal,

of size = 1520 x 290 x 232.8 mm., body made from M.S.

Powder Coated, ≤53 dB, Air Velocity(m/s) = 22.0, Air Volume

Self (m3/s)/CFM = 2580/1518, installation height at approx.

Explai feet from F.F. level, with Sensor to operate the Auto Door -

235 ned "EX02", with all hardware, etc. complete. 6.00 ₹ 35,835.00 Nos. ₹

Explai Providing and fixing first class indian teak wood 75 mm x

236 ned mm moulded hand rails in straight lengths complete 11.00 ₹ 490.00 R. Mt. ₹

Table750x750x 1000 mm The scope includes supply and

erection /installation of the item on site the table area of

mm thick BWP plywood.The top surface is finished with high

pressure laminate of 1 mm thick the edges of all surfaces

with teak wood beading the thickness of top and legswith

40mm ,1no keyboard tray with powder coated,) modesty

Pamel :1 mm thick laminate on 19 mm thick BWP Playwood,

Self The rate including labour ,All small Attachment ,and

Explai necessary item required to complete the job. as Per

237 ned Instruction of Engineer in Charge. 2.00 ₹ 25,000.00 Nos. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & laying New Wooden Stage Flooring:

Providing and fixing 75 mm. to 90 mm. wide X 20mm. to

22mm. thick in random lengths "Short length logs" with

lengths ranging from 450mm. to 750 mm., "A" grade, 1st

(Grade) class teak wood (Red/Yellow Meranti wood or

Equivalent Certified Reclaimed wood), flooring planks with

tongue and groove(T&G) joints. The edges of the boards will

have a finger lock groove and the bottom side with air pass

The lengths shall be based on the scientific data of the kiln

drying process to under 8 to 9 % moisture content, free from

knot/s, warp/s and bend/s, etc., on a layer of 19 mm. thick

BWP grade, termite & borer proof, full gurjan core, calibrated

plywood with minimum 10 years' replacement guarantee, of

approved make and manufacturer,

fixed to interlocked grid frames 600 mm. x 600 mm. c/c,

made using 65 mm. X 65 mm. hardwood battens in

directions, perpendicular to each other, interlocked using

hard wood joinery.

The hardwood framework joint shall be resiliently supported

on 12 mm. thick X 100 mm. wide X 100 mm. long Anti-

vibration EPDM Rubber Pads, having grip on both sides,

having Specific Gravity: 1.60 g/cm3 (+/-.05), Hardness:

(+/- 5) Shore A, Tensile Strength: 30 kg/cm2 ( minimum ),

Elongation: 250% ( minimum ).

The frame work shall be inter-connected in approved manner

using wooden joinery (Half lap joint) at the junctions,

including levelling the top in a single level and painting the

wood work with one coat of "Woodtech" primer by Asian

Paints or approved equal and 2 coats of "Black Japan" paint

all around, etc. complete.

The framework shall be filled with 50 mm. thick resin bonded

Insulation Wool (Rockwool) of density 24 kgs./cum. In-

between gaps shall be filled in with fine sand and PU

insulation foam, if required, to eliminate all gaps under the

Ends of the boards will be locked by inserting the wooden

fingers through the edge grooves and fixed with suitable

Self adhesive. The expansion of 12-15 mm will be left open

Explai between the wooden flooring and the surrounding tiled area /

Polishing work on existing / New wooden stage: The

whole wooden existing / new floor will be machine sanded in

uniform level as per the manufacturer's guidelines, Staining

the entire wooden floor using selected wood stains as per

approved brand to give a uniform tone to the entire stage and

to let it dry out for 2 to 3 days and finished with Clear water-

based bicomponent matte anti-yellowing top coat-2K CLEAR

WB TCOAT G__ - bearing code: VPA208G__ by ICA

(Extremely low VOC emission), on top of 2 base coats.

First Coat - 1 Coat Epoxy IS207

Second Coat - 1 Coat Sealer FA10

Third (Top) Coat - 2 Coats of VPA208G.

as per the manufacturer's guidelines.

The surface shall be matt finished and non-slippery.

Wood stainers/oils shall be applied prior to application of

coating to make the entire stage of uniform shade and colour

The rate for flooring shall include providing additional

framework required for housing microphones and power

outlet junctions - signal & Pop-up Stage Boxes, as per the

drawing, including providing and fixing hinged 18 mm. thick

teakwood cover for the junction boxes, using concealed SOS

hinges, if required, as per design & drawings as well as Anit-

termite treatment to internal wood surface of plank by Aldrex

/ Bayer Corp. or equivalent, etc. complete.

The Work shall be complete in all respects as per the

drawings and specifications to the satisfaction of Engineer in-

The Varying natural color of the wood due to its natural

characteristics shall not be considered as a defect, but

should be to a minimum, as per satifaction of Architect and

All timber shall be free from loose knots, bee or borer holes,

splits, cracks & fungal attack.

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

All timber shall be kiln seasoned to a moisture contain as

specified above, measured at the time of material

procurement & installation. Post installation, checks of

Moisture content shall be done on random planks on the

stage and shall have to be replaced if found defective or not

meeting the above standards, or without any reason, as

instructed by E.I.C.

FSC Certified Wood shall be pressure if new brand new wood

Required checking and certification shall be required for

wood that is old and reclaimed and fit for the above purpose.

Providing and applying ICA clear PU or Aquadur water-based

PU or as approved upto finishing (min 3 coats) including all

material, labour including scaffolding etc.and and

measurement of beading patti shall be in evaluated in square

meters only ,complete the work satisfactorily as per

Self instruction of architect or Engineer-in charge.

238 ned Basic Rate for ICA wood clear PU= Rs. 175/- S.Ft. 400.00 ₹ 2,795.00 Sq. Mt. ₹

PART 06: EXTERNAL PLUMBING & DRAINAGE WORK

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate

20mm size) ,Foundation concrete 1:5:10 & fixing C.I. cover

with frame to be not less than 38 kg. On top etc. comp.

Inside dimension,455 x 610 mm &450 mm deep for single

(A) Same as above but Precast RCC heavy duty Cover

239 69 instead of C.I. Cover 25.00 ₹ 2,681.76 No ₹

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.(i) for

240 Expln. 455mm x 610mm size. 10.00 ₹ 242.39 No ₹

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with bricks

having crushing strength not less than 35Kg/Cm2 in C.M. 1:5

C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded

stone aggregate 20mm size) foundation concrete 1:5:10

inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.

(ii) Inside dimensions 500mm x 700 mm and 450mm deep

241 69 for pipe line with one or two inlets. 10.00 ₹ 3,624.51 No ₹

Extra over items 24.44 for every additional

depth of 0.1M. of part thereof beyond 450mm

Self depth for Brick masonry chamber.

242 Expln. (ii) for 500mm x 700mm size. 2.00 ₹ 262.24 No ₹

Providing, Lowering & laying joining R.C.C. NP2 CLASS Pipe

In C.M. 1:1 of following nominal internal diameters incl.

Testing of pipes and joints etc. Comp

Supplying and fixing reinforced concrete heavy duty non

pressure pipes with Spigot and Socket ended pipes or

flush jointed or collars for culverts carrying heavy traffic as

per IS458 - 1991 specifications including setting the pipes in

C.M. 1:2 watering and laying (to level or slopes)of class NP3

Self of following internal daimeters.

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto

mt. Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

EXECUTED WITH MANUAL LABOUR

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement

:2-coarse sand : 4-graded stone aggregate 20mm nominal size)

foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick

bats 40 + 50mm size) inside plastering 15mm thick with Cement

Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat

of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i) Inside size

900mm x 1200mm and 1.5M. deep including C.I. cover with frame

size 560mm diameter total weight of cover and frame to be not

less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A)

With 230mm thick walls of brick msonry using brick having

crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar

1:5 (1- Cement: 5-Coarse sand)

(1) A type depth 0.90 Metre for 150mm diameter sewer. 1.00 ₹ 10,920.76 Nos. ₹

246 107 (2) B type depth 1.50 Metre for 150mm diameter sewer. 1.00 ₹ 19,139.07 Nos. ₹

Part 07: Road Side Compound Wall

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

250 87 Up to G.L./P.L.Beams.

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.00 ₹ 7,665.60 C.M. ₹

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. D)

251 109 Column, Pillers, posts and struts

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 2.10 ₹ 10,658.16 C.M. ₹

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in

252 5 (A) Foundation and Plinth 3.10 ₹ 2,680.21 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc. comp.

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.in

depth consolidating each disposited layer by ramming and

(B) WORK ABOVE PLINTH LEVEL

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. (A)

(1)Having c/s area up to 0.08s.mt 1.00 ₹ 12,123.79 C.M. ₹

255 109 (2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 ₹ 10,658.16 C.M. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

256 8 Wall Caps / Coping 1.00 ₹ 3,982.62 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

R.C.C. work incl. bending, binding & placing in position etc.comp.

257 10 Ground Floor 1170.00 ₹ 76.21 Kg ₹

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

258 18 Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 12.00 ₹ 4,511.97 C.M. ₹

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vartical ( two times ) up to good

quality and size of grain in elevation as per directed by

259 16 engineer incharge. 161.00 ₹ 324.00 S.M ₹

Providing & applying two coats of weather shield max paint (3 452.00 ₹ 82.00 S.M ₹

260 17 coats may be required in case of darker colours.)of ICI Dulux or

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an

even shade including cleaning the surface of all dirt, dust and other

263 44 foreign matters. 333.00 ₹ 65.31 S.M ₹

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

Self and scoured with brushed fine steel wool, scrapers and sand

Explai paper with ready mixed priming

264 ned paint brushing red lead. 333.00 ₹ 35.00 S.M ₹

Removing and scraping of old deteriorated plaster of any

Self thickness from wall / RCC member including stacking of

Explai serviceable material and disposal of unserviceable from site

265 ned of work with all lead and lift. 161.00 ₹ 19.57 S.M ₹

Part 08: Other Than Road Side Compound Wall

(A) WORK UPTO PLINTH LEVEL

Excavation for foundation includ.sorting out & stacking of useful

materials & disposing of the excavated stuff upto 50 mt. Lead & all

lift, watering etc. Comp. (A) Loose or Soft soil With Machinaries

Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) and

getting out the soil and disposal of the surplus excavated soil as

directed within a lead of 50 Meter for following diameter of pipes.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp. Includ.cost

of form work but exclu. Cost of reinforcement for reinforced

concrete work in : (A) Foundation, footing, Base of columns and

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in :

269 87 Up to G.L./P.L.Beams.

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 ₹ 7,665.60 C.M. ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. D)

270 109 Column, Pillers, posts and struts

Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 1.00 ₹ 10,658.16 C.M. ₹

Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mmnominal size) and

curing complete excluding cost of formwork in

271 5 (A) Foundation and Plinth 1.00 ₹ 2,680.21 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500D reinforcement for

R.C.C. work incl. bending, binding & placing in position etc. comp.

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.in

depth consolidating each disposited layer by ramming and

(B) WORK ABOVE PLINTH LEVEL

Providing & laying ordinary cement con. 1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal size)

finishing smooth curing etc. comp. Incld. Cost of form work but

excl. Cost of reinforcement for R.C.C. Work in : Up to G.L./P.L. (A)

(1)Having c/s area up to 0.08s.mt 1.00 ₹ 12,123.79 C.M. ₹

274 109 (2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 ₹ 10,658.16 C.M. ₹

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- crushed stone aggregates 20 mm nominal

size) and curing complete including cost of formwork in (A)

275 8 Wall Caps / Coping 0.00 ₹ 3,982.62 C.M. ₹

Providing & fixing IS Mark TMT Bar FE 500d reinforcement for

276 10 R.C.C. work incl. bending, binding & placing in position etc.comp.

Ground Floor 300.00 ₹ 76.21 Kg ₹

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in Cement Mortar 1:6 (1-

277 18 Cement : 6 -fine sand) (C) Fly Ash Bricks

Ground Floor 0.00 ₹ 4,511.97 C.M. ₹

Providing & Applying 20mm. Th. Heavy Roller plaster on walls or

similar surfaces at all floor levels consisting of 12 mm av. Th.

Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm. th. Finishing

coat of C.M. 1:1 (1 cement: 1 sand) apply thick cement slurry and

apply roller horizontal as well as vartical ( two times ) up to good

quality and size of grain in elevation as per directed by

278 16 engineer incharge. 162.00 ₹ 324.00 S.M ₹

Providing & applying two coats of weather shield max paint (3

17 coats may be required in case of darker colours.)of ICI Dulux or 590.00 ₹ 82.00 S.M ₹

Providing 20 mm deep finished groove in plaster in line and level

etc. Comp. For all Floor (M.R.)

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of

red lead paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams.

Hip and jack rafters, purlins conneted to common rafters and the

Painting two coat (excluding priming coat) on new steel and other

metal surface with synthetic enemal paint, burshing to give an

even shade including cleaning the surface of all dirt, dust and other

282 44 foreign matters. 468.00 ₹ 65.31 S.M ₹

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

throughly cleaning oil, grease dirt and other foreign matter

and scoured with brushed fine steel wool, scrapers and sand

Self paper with ready mixed priming

283 Expln. paint brushing red lead. 468.00 ₹ 35.00 S.M ₹

Removing and scraping of old deteriorated plaster of any

thickness from wall / RCC member including stacking of

Self serviceable material and disposal of unserviceable from site

284 Expln. of work with all lead and lift. 162.00 ₹ 19.57 S.M ₹

PART 09: INTERNAL ELECTRIFICATION WORK

Sub PART 01: Internal Wiring

Contractor need to provide & submit detailed design for Electrical, Stage Lighting, A-V- System, Acoustical Design,

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire

of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

Self (f) with medium class Rigid PVC pipe and accessories

285 Expln. erected concealed in wall/ceiling complete Cat III 580.00 ₹ 510.10 Point ₹

Point wiring for secondary light point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of ISI marked

KV grade ZFLR/HFFR PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary light

with accessories erected on Metal / PVC / wooden box

covered covered with appropriate front plate modules erected

on / in wall / ceiling for open / concealed wiring. with

necessary Lamp holder / ceiling rose / H.D.Connector as

directed.as per pipe erected with following type of

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

Self (f) with medium class Rigid PVC pipe and accessories

286 Expln. erected concealed in wall/ceiling complete 20.00 ₹ 176.04 Point ₹

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of .ISI marked 1.1 KV Grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

(f) with medium class Rigid PVC pipe and accessories

Self erected concealed in wall/ceiling complete

287 Expln. Cat.III 104.00 ₹ 708.41 Point ₹

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

ZFLR/HFFR PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat-III 104.00 ₹ 535.55 Point ₹

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu.

Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

Cat-III (ZFLR/HFFR) 37.00 ₹ 782.65 Point ₹

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu.

Wire with 2.5 sq.mm ( green) earthing wire from mcb d b

(f) with medium class Rigid PVC pipe and accessories

Self erected concealed in wall/ceiling complete

288 Expln. Cat-III. (ZFLR/HFFR) 20.00 ₹ 915.21 Point ₹

Point wiring for on board Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in wall /

Self ceiling with following type accessories

289 Expln. Cat. III (ZFLR/HFFR) 113.00 ₹ 270.43 Point ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories

mounted with PVC / Metallic concealed/open box with single

mounting base frame covered with textured/metallic /white

front plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

Self 3 nos. 6A 5 pin Plug

290 Expln. CAT III 6.00 ₹ 1,133.22 No. ₹

Point wiring for Two Way Controlled Light Point with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI

marked 1.1 KV grade ZFLR/HFFR PVC insulated multi strand

copper wires erected in below type of pipe with 6A Modular

type switches and following type of accessories erected on

PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories

Self erected flushed on wall/ceiling complete

291 Expln. Cat. III 40.00 ₹ 596.00 Point ₹

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured/ metallic/white front plate

modules erected with necessary connections as per site

situation directed by Engineer In charge. (ZFLR/HFFR)

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang Cat. III 12.00 ₹ 168.62 Each ₹

(4) TV Co-axial Socket outlet - Cat III 12.00 ₹ 168.62 Each ₹

(5) Electronic hum Free steps EME Fan regulator. CAT III 104.00 ₹ 418.90 Each ₹

(7) Blank Plate Single Cat. III 70.00 ₹ 26.51 Each ₹

(11) 6 Amps. Bell Push CAT III 6.00 ₹ 159.08 Each ₹

Self (22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

292 Expln. Complete. CAT-III. 20.00 ₹ 522.83 Each ₹

Providing and erecting ISI mark Medium class RIGID PVC

PIPES of following size complete to be erected on/in wall or

ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of

pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with

required nos. of coupling, PVC bushes, Check-nuts etc.

complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of

following size .

(A) Supplying and laying UPVC cable trucking system

comprising unplasticised polyvinyl, chloride rigid material with

ignition free & flame proof confirming BS. With All necessary

accessories (Like elbow, tee, bank etc..) and measuring of

following sizes.

Self (1) 75 mm x 50 mm trucking 10.00 ₹ 277.75 Mtr. ₹

296 Expln. (3) 50 mm x 50 mm trunking 10.00 ₹ 188.87 Mtr. ₹

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with

2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Self (e) 3 wire 6 sq. mm 1700.00 ₹ 200.99 Mtr. ₹

297 Expln. (h) 4 wire 6 sq. mm 1000.00 ₹ 260.58 Mtr. ₹

providing and erecting Mains with ISI marked electrolyte

stranded copper conductor, Non PVC Zero Halogen free fire

retardant insulated copper conductor, insulated wire (HRFR)

conforms to IS-694, erected in existing pipe with 1.5sq. mm

copper conductor of same specifications for earth continuity

of following size.

Self [j] 3 wire 2.5 sq.mm 1800.00 ₹ 102.01 Mtr. ₹

298 Expln. [k] 3 wire 4.0 sq.mm 100.00 ₹ 140.39 Mtr. ₹

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

(b) Armoured [Jelly Filled]

299 Expln. (1) Ten Pairs 100.00 ₹ 125.24 Mtr. ₹

Providing & Erecting approved make following size of TV Co-

axial flexible cable comprising inner conductor of solid bare

copper insulated with Foam PE & Secondary conductor

made of poly - Aluminium film bonded Al. Braids @ suitable

coverage overall sheathed with black PVC insulation.

Providing & erecting main Distribution (MDF) indoor type,

back mounted frame as per DoT standard approved with

301 Expln. (b) Suitable for 20 pair 1.00 ₹ 1,368.55 Nos. ₹

302 Expln. SITC of HDMI Cable 20 Mtr. 2.00 ₹ 13,363.06 Nos. ₹

303 Expln. SITC of VGA Cable 20 Mtr. 2.00 ₹ 6,681.53 Nos. ₹

304 Expln. SITC of Audio Cable 20 Mtr. 2.00 ₹ 6,948.79 Nos. ₹

Sub Part-02: Light Fixtures

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with

diffuser with company mark/name 160V to 270V, Power

Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency >

85 % ( fitting required LM-79 & LM-80 Certificates) (NOTE:

Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet

Cat-III 30.00 ₹ 165.64 Each ₹

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

CAT III 233.00 ₹ 373.70 Each ₹

Self (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

305 Expln. CAT III 20.00 ₹ 535.30 Each ₹

Sr. DTS Rate without GST

Description Qty. Unit Amount

No. no. & with Cess

Supplying and erecting led lamps with following wattage

capacity of 220 to 240 voltage, minimum 15000 burning

hours life, 500 V in built-surge protection,Polycarbonate

diffuser, mounting suitable for E14 / E27 / B22 lamp holders,

(A) LED Lamps integral type, with PC diffuser suitable LAMP

Self (b) 5 to 8 watts

306 Expln. CAT III 4.00 ₹ 112.11 Each ₹

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company