Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹3.1 L+₹3,338.76 (1.10%)Rejected-Finance | L2 | Rejected-Finance L2 |
Tender Value
₹1.6 L
EMD Value
₹3,300
Closing Date
14 Jan 2021, 5:00 pmClosed
Executive Engineer, HPPWD Division Sangrah
Executive Engineer, HPPWD Division Sangrah
Repair and Maintenance of Residential building Type-lll Qtrs. for PWD Staff at Haripurdhar Tehsil Sangrah Distt. Sirmour H.P
2020_PWD_43504_3
Sangrah 9027-78 dated 17.12.2020
Open Tender
Civil Works
Item Rate
90 days
Sangrah
Please refer Tender documents.
9 documents required · 9 mandatory
₹350
₹3,300
21 Jun 2021
31 Dec 2020
15 Jan 2021
31 Dec 2020
14 Jan 2021
31 Dec 2020
Amount
Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers upto floor two level as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Providing and laying cement concrete 1:1.5:3 (1cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing upto floor two level as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Brick work using common burnt clay building bricks in foundation and plinth in :- Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws. 40 mm thick 2nd class deodar wood as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Providing and fixing commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) 6 mm thick as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
White glazed tiles 6 mm thick in flooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3 sand) finished with flush pointing in white cement as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
White glazed tiles 6 mm thick in skirting risers of steps and dado 12 mm thick cement mortar 1:3 (1 cement :3 sand) and jointed with cement slurry as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter) sand papering and knotting Readymixed paint brushing wood primer pink as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter, sand papering & stopping With white enamel paint as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges as per HPPWD specification 1990-Volume-I,including carriage of all labour, equipment and materials to various locations through all modes of transportation in all leads,lifts and other incidental charges as per the direction of the Engineer-in-Charge.
Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within a Lead of 20 metres with Cement Mortar 1:4 (1 Cement : 4 Sand) as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Supplying and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary:- Plain Glass: 4mm thick as per H.P. PWD.spesification 1990 volume - I, including carriage of all labour,equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges.
Providing & fixing Water heater (Gyser) of 20.00 liter capacity of approved brand and manufacture (Heavells or bjaja) including all fixtures and accessories within all leads & lifts as per the direction of Engineer-in -Charge.
RANDEEP SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .