Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹16.3 L+₹816.20 (0.05%)Rejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹16.4 L+₹9,453.60 (0.58%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
10 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Banar
Garrison Engineer Banar, Jodhpur-342027
PROVISION OF TRANSIT VEH PARK (TVP) PH-II AT AA BANAR
2022_MES_538681_2
882217/E8
Open Tender
Civil Works
Item Rate
180 days
Banar
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer Banar
₹34,000
Yes
6 Oct 2022
20 Aug 2022
12 Sept 2022
20 Aug 2022
10 Sept 2022
27 Aug 2022
Amount
BUILDING WORK Surface excavation n.exc 30cm deep and avg 15 cm deep and getting out in any type of soil.
Excavation in foundation trenches (not exceeding 1.5 m in width and depth up to 1.5 meter or 10 sqm on plan), including dressing of sides and ramming of bottoms, including getting out in hard rock by means of mechnical excavator complete all as specified.
M&L for Cement concrete type D2 (1:4:8) using 40mm gradded aggregate in foundations, filling and mass-concrete complete all as specified.
M&L for design mix M-25 Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified.
M&L design mix M-25 for Columns, pillars, piers, posts and struts complete all as specified.
M&L design mix M-25 for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.
M&L for design mix M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Ditto as per item No 08 but 6mm to 8mm dia as in stirrups
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified.
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified.
M&L for square rubble walling , Jodhpur type regular coursed , well bonded bedded and solidly hearted built in CM (1:6 ) complete all as specified.
Extra over stone walling for hammer dressing to face stones and dressing to face stones with maximum depression on face from a straight edge not exc 20 mm and dressing face beds and joints, as specified of squared rubble walling, regular coursed, Jodhpur type complete all as specified.
M&L for 10mm thick rendering over concrete surfaces of ceiling in CM 1:3 to be finished even and smooth (without using extra lime or cement) complete all as specified.
M&L for 15mm thick rendering over stone masonary or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.
M&L for preparation of new plastered surface of wall and applying three coats of white wash Complete all as specified.
M&L for preparation of new plastered surface of ceiling and applying three coats of white wash Complete all as specified.
M&L for preparation of new unplastered surface of concrete and applying two coat of cement base paint over one coat of primer complete all as specified.
M&L for 10 mm thick plaster in cm 1:4 with WPC compound complete all as specified . Note:- Water proofing compound will be measured and paid separately.
Supply only Integral water proofing compound
M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection complete all as specified.
M&L Hardcore of guage n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface using broken stone or boulders complete all as specified.
M&L 100 mm thick PCC (1:4:8) type D-2 using 40mm gradded aggregate as in sub base of floors complete all as specified.
M&L for cement concrete work in flooring/hard standing of flexural strength 40Kg/square centimeter in field using 400 Kg of cement per cubic meter, thickness of concrete 25 cm or less complete all as specified and directed.
M&L for Finished the surfaces of concrete Hard standing by brooming complete all as specified.
M&L for Forming contraction (Dummy) 40mm deep x 10mm wide filled with sealing compound, Grade 'A' complete all as specified.
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade 'A' complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.
Removing excavated material nexc. 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified.
ROAD AND PATH WORK Earth work in all kind of soil, excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated soil upto 50 m and complete all as specified.
Rolling and consolidating to required gradient and camber of formation surface (in cutting or filling) of roads with 8 to 12 tonne power roller including filling in depressions which occur during rolling complete all as specified.
M&L for 200mm thickness (Compact thickness) granular sub base by providing close graded material conforming to specificatios, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lits, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power rolled to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. GSB work will be carried out with material conforming to Grade-I (size range 75mm to 0.075mm) having CBR value-30 complete all as specified.
M&L 150 mm thick PCC (1:3:6) type C-2 using 40mm graded Agg laid to required gradient and camber complete all as specified.
M&L for sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed.
M&L for polythene film, black, 400 micron laid in road (under PQC) complete all as specified.
M&L for cement concrete work in pavement/hard standing of flexural strength 40 Kg/Sqcm in field using 400 kg of cement per cum of concrete minimum (200 mm thickness) complete all as specified.
M&L for Forming contraction (Dummy) joints in traverse direction to the road at a spacing of 3.0 m, 40 mm deep and 10 mm wide filled with sealing compound grade 'A' complete all as specified.
M&L for Forming construction joints 65mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified.
M&L for Finished the surfaces of concrete roads, pavements by brooming complete all as specified.
AREA DRAINAGE WORK: Excavation in foundation trenches (not exceeding 1.5 m in width and depth up to 1.5 meter or 10 sqm on plan), including dressing of sides and ramming of bottoms, including getting out in hard rock by means of mechnical excavator complete all as specified.
M & L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate in bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested under 300mm dia pipe complete all as specified.
M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation / bed complete all as specified.
M&L PCC Block walling (Solid block precast with PCC 1:3:6 type C-1) exc 10cm in width and settting in CM (1:4) complete all as specified.
M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate in coping including weathering & throating as directed. CM1:4 complete all as specified.
S & F of RCC pipe Class NP3, 300mm bore. laid and jointed complete with collars complete all as specified.
M & L Rendering 10 mm thick in CM 1:4 on concrete surfaces including finished even & smooth using without extra cement complete all as specified.
M&L for two coats of cement based paint over one coat of primer on newly plastered surfaces complete all as specified.
M&L for stone pitching laid dry grouted in CM (1:6) complete all as specified.
Returning filling in including spreading, levelling watering and well ramming in layer n exc 25cm in soil complete all as specified.
Earth work in (All kind of soil) excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge
M&L Plain Cement concrete Type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified.
M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.
M&L PCC coping type C-1 (1:3:6) using 12.5mm graded stone aggregate as in coping including necessary formwork, including weathering, slightly rounded or chamfered angles and throating complete all as specified.
Extra over to stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, regular courses complete all as specified.
M&L for flush ponting in cement mortar 1:3 to squared rubble walling jodhpur type regular course complete all as specified.
M&L PCC (1:2:4) type B-1, using 20mm graded stone aggregate as in surface channel and drains etc complete all as specified.
Extra for forming fair finished drain or channel 54 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.
INTERNAL ELECTRIFICATION WORKS : M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked, in PVC rigid conduits heavy duty ISI marked totally concealed in wall/floor/roof including all accessories etc. with 2 mm thick sunken boxes including 3mm thick laminated sheet cover suitable for mounting switches/sockets etc. and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to common earth dolly complete all as specified for the following:-Note- (i) Cutting in chases and pointing in will be done by contractor without any cost. (ii) Making good of distrubed surfaces matching with existing finishes will be done by contractor without any extra cost .
One light point controlled by one, One-way switch complete all as specified.
One fan/Exhaust fan point controlled by one, One-way switch complete all as specified.
One 5 Pin 5 Amp Socket outlet point on independent board with other switches including earth wire complete all as specified.
One 5 Pin 5 Amp Socket outlet point on same board with other switches including earth wire complete all as specified.
All as per item No 61.00 above but with 4 Sqmm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI-694 marked, including PVC insulated stranded copper conductor 4 Sqmm single core cable as earth and connecting to common earth dully complete all as specified for one 15 Apms socket outlet point on independent board.
S&F piano flush type 5 Amps single pole switch complete all as specified.
S&F multipurpose socket outlet with piano flush type 3 pin 5 Amps complete all as spedified.
S&F switch socket combination 3 pin 16 Amp flush type complete all as specified.
S&F lamp holder, PVC/polycarbonate type with back plate suitable and directed.
S&F ceiling rose surface type three terminals complete as specified.
S&F LED lamp 9 watt complete all as specified.
S&F LED based security light 35 W in aluminium pressure die cast housing with touched glass cover having IP 66 protection and with aluminium bracket including nut and bolts complete all as specified.
S&F LED flood light 70 watt 30 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified.
S&F heavy duty metal body aluminium aloy one piece blade, double ball bearing 90 degree oscillation with powerful heavy duty motor 24 inch 1440 RPM air circulator wall fan 600mm sweep wall mounting fan with nut bolts complete all as specified.
S&F MCB SPN DB 8 way, double door, with 200 Amp rated busbar 240 V complete all as specified.
S&F for MCB single pole rated capacity 6 to 32 Amps, 240 V breaking capacity 10 KA, C-curve complete all as specified
S&F for MCB SPN rated capacity 32 amps, 240 V breaking capacity 10 KA C-Curve complete all as specified.
M/S PIYUSH CONSTRUCTION COMPANY
Tirupati electricals works and services
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .