Construction of ICDS Ghatak kacheri on the second floor of the Health and VBDC Ward Office at T.P.S. No. 36 (Althan), F. P. No. 126 (Sub center) in South West (Athwa) Zone. 2nd Attempt

Name of work : Construction of ICDS ghatak kacheri on the second floor of the health and VBDC ward office at T.P

Scheme No. 36 (Althan), F. P No. 126(sub center) in South West(Athwa) Zone. (2nd Attempt)

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

WORK ABOVE PLINTH

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

1 1 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12930.68

First Floor 0.00 C.M. 12971.23

Second Floor 0.00 C.M. 13011.78

Terrace Floor 0.00 C.M. 13052.33

Stair Cabin Top 0.00 C.M. 13092.88

(2) Having cross sectional area more than 0.085 sq. mt .up to

Ground Floor 0.00 C.M. 11253.32

First Floor 0.00 C.M. 11293.87

Second Floor 0.00 C.M. 11334.42

Terrace Floor 0.00 C.M. 11374.97

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 9288.03

First Floor 4.00 C.M. 9328.58

Second Floor 21.00 C.M. 9369.13

Terrace Floor 9.00 C.M. 9409.68

Stair Cabin Top 1.00 C.M. 9450.23

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 9083.57

First Floor 0.00 C.M. 9124.12

Second Floor 0.00 C.M. 9164.67

Terrace Floor 0.00 C.M. 9205.22

(2) Having cros sectional area more than 0.08 sq. mt and upto

Ground Floor 0.00 C.M. 8155.37

First Floor 0.00 C.M. 8195.92

Second Floor 0.00 C.M. 8236.47

Terrace Floor 0.00 C.M. 8277.02

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 7067.84

First Floor 14.00 C.M. 7108.39

Second Floor 34.50 C.M. 7148.94

Terrace Floor 3.50 C.M. 7189.49

(SOR SMC Pg No. 14 It No. A & B)

(2) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7965.38

First Floor 0.00 C.M. 8005.93

Second Floor 0.00 C.M. 8046.48

Terrace Floor 0.00 C.M. 8087.03

(3) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7377.92

First Floor 0.00 C.M. 7418.47

Second Floor 0.00 C.M. 7459.02

Terrace Floor 0.00 C.M. 7499.57

(4) Having more than 13 cm. Thickness

Ground Floor 0.00 C.M. 6793.97

First Floor 15.50 C.M. 6834.52

Second Floor 44.00 C.M. 6875.07

Terrace Floor 6.00 C.M. 6915.62

(SOR SMC Pg No. 14 It No. C)

Ground Floor 0.00 C.M. 9963.33

First Floor 1.00 C.M. 10003.88

Second Floor 1.50 C.M. 10044.43

Terrace Floor 0.10 C.M. 10084.98

(SOR SMC Pg No. 14 It No. D)

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

(E) Chhajja WORK ABOVE PLINTH

Ground Floor 0.00 C.M. 7119.46

First Floor 1.50 C.M. 7160.01

Second Floor 2.50 C.M. 7200.56

Terrace Floor 0.50 C.M. 7241.11

(SOR SMC Pg No. 14 It No. E)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

2 2 crushed stone agg. 20 m.m Nominal size)& curing comp. incl.

cost of from work in: wall caps/ copings

(SOR SMC Pg No. 9 It No. 97) 6.30 C.M. 4085.83

Providing, mixing, placing, compacting by machine vibrator,

curing, testing M25 Design mix concrete as per IS 456:2000

3 3 (latest revision) and as per tender specification in all items

including cost of form work and rendering but excluding cost

of reinforcement

(A) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7765.80

First Floor 0.00 C.M. 7806.35

Second Floor 3.00 C.M. 7846.90

Terrace Floor 0.00 C.M. 7887.45

(SOR SMC Pg No. 14 It No. F)

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9483.21

First Floor 0.00 C.M. 9523.76

Second Floor 0.00 C.M. 9564.31

Terrace Floor 0.00 C.M. 9604.86

(SOR SMC Pg No. 14 It No. G)

Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

4 4 reinforcement for R.C.C. work incl. bending, binding & placing

in position etc.comp.---

Ground Floor 0.00 Kg 77.29

First Floor 5310.00 Kg 78.34

Second Floor 16945.00 Kg 79.39

Terrace Floor 2930.00 Kg 80.44

Stair Cabin Top 330.00 Kg 81.49

(SOR SMC Pg No. 2 It No. 15)

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc. comp.

Ground Floor 0.00 C.M. 4729.83

First Floor 25.00 C.M. 5018.55

Second Floor 49.50 C.M. 5307.27

Terrace Floor 32.00 C.M. 5595.99

Stair Cabin Top 2.00 C.M. 5884.71

(SOR SMC Pg No. 2 It No. 16)

Providing & constructing Half brick masonary in Fly Ash

6 bricks having crushing strength not less than 35 kg/sq.cm in

c.m 1:4 (1 cement: 4 sand) curing etc complete.

Ground Floor 0.00 S.M. 712.81

First Floor 52.00 S.M. 719.37

Second Floor 303.00 S.M. 725.94

Terrace Floor 99.00 S.M. 732.50

(SOR SMC Pg No. 2 It No. 17)

Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

7 slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand)

(A) for wall and similar surfaces

Ground Floor 0.00 S.M 199.28

First Floor 197.00 S.M 228.84

Second Floor 808.00 S.M 258.39

Terrace Floor 54.00 S.M 287.94

Stair Cabin Top 6.00 S.M 317.49

(B) for ceilings and soffits of stairs

Ground Floor 0.00 S.M 225.34

First Floor 94.00 S.M 254.89

Second Floor 309.00 S.M 284.45

Terrace Floor 23.00 S.M 314.00

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

(SOR SMC Pg No. 3 It No. 24) WORK ABOVE PLINTH

Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC)at junction of brick work

and RCC work or two dissimilar surfaces, at all heights fixed

8 by nails, rowal plugs or tag by cement mortar 1:3 before

applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 0.00 S.M. 102.00

First floor 15.00 S.M. 102.00

Second Floor 56.00 S.M. 102.00

Terrace Floor 5.00 S.M. 102.00

(SOR SMC Pg No. 11 It No. 124) MR

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

mm. th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply

9 thick cement slurry and apply roller horizontal as well as

vartical ( two times ) up to good quality and size of grain in

elevation as per directed by engineer incharge.

Ground Floor 0.00 S.M 324.00

First Floor 197.00 S.M 324.00

Second Floor 499.00 S.M 324.00

Terrace Floor 240.00 S.M 324.00

Stair Cabin Top 17.00 S.M 324.00

(SOR SMC Pg No. 3 It No. 28) MR

Providing 35 mm wide throating or plaster drip and

moulding it to R.C.C. chajja etc. comp. For all floor

Ground Floor 0.00 R.M 43.74

First Floor 17.50 R.M 43.74

Second Floor 25.50 R.M 43.74

Terrace Floor 10.50 R.M 43.74

(SOR SMC Pg No. 3 It No. 29)

Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

Ground Floor 0.00 R.M 50.00

First Floor 17.00 R.M 50.00

Second Floor 25.50 R.M 50.00

Terrace Floor 10.50 R.M 50.00

(SOR SMC Pg No. 3 It No. 30)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed

12 of 12mm thick cement mortar 1:3 (1 cement : 3 coarse

sand) finishing with flush pointing in white cement.

Ground Floor 0.00 S.M 1092.37

First Floor 97.00 S.M 1092.37

Second Floor 238.00 S.M 1092.37

Terrace Floor 7.00 S.M 1092.37

(SOR SMC Pg No. 4 It No. 44)

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick

13 cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

Ground Floor 0.00 S.M 1135.80

First Floor 4.00 S.M 1135.80

Second Floor 166.00 S.M 1135.80

Terrace Floor 1.10 S.M 1135.80

(SOR SMC Pg No.4 It No. 45)

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

sand) on new surface or fixing on existing flooring by

14 adhesive material including dismentaling of existing flooring

and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. comp.Size 24" x

24" For Antiskid tiles

Ground Floor 0.00 S.M 1467.72

First Floor 0.00 S.M 1467.72

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Second Floor WORK ABOVE PLINTH

Terrace Floor 0.00 S.M 1467.72

(SOR SMC Pg No.4 It No. 43)

Providing and laying polished Kota stone slab flooring

over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

15 coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Ground Floor 0.00 S.M 1019.39

First Floor 0.00 S.M 1019.39

Second Floor 23.00 S.M 1019.39

Terrace Floor 0.00 S.M 1019.39

(SOR SMC Pg No.4 It No. 32)

Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1- Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to match

the shade of slab including rubbing and polishing etc.

Ground Floor 0.00 S.M 1130.79

First Floor 0.00 S.M 1130.79

Second Floor 3.00 S.M 1130.79

Terrace Floor 0.00 S.M 1130.79

(SOR SMC Pg No.4 It No. 33)

Providing and constructing sandwitch type Granite stone

cooking platform 0.6 mt. wide & 0.75 mt. height,

including one end side granite stone (Double Polish) of

1.25 mt. height & front granite stone patti of 10 cm wide,

vertical partitions of half B.M. wall in C.M. 1:4 and 10mm

17 th. plaster in 1:3 with finishing smooth with cement slurry

as required and Stainless Steel sink of 0.45 mt x 0.45 mt

size of approved quality and make with required all fitings &

fixitures etc. comp as per instruction given by site in charge

at all floors. (Basic rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 0.00 R.M. 3128.00

First Floor 0.00 R.M. 3128.00

Second Floor 0.00 R.M. 3128.00

Terrace Floor 0.00 R.M. 3128.00

(SOR SMC,Pg No.11, It No. 123) MR

Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer

in charge etc. comp..

All Floor 13.00 S.M 500.00

(SMC SOR,Pg No.6, It No. 61)

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak

wood frames of finished size 12cm x 7cm.incl. anodized

19 aluminum fixtures & fastenings incl. Primer coat of approved

quality & two coats of oil painting etc. For all Floor

All Floor 8.00 S.M 5533.68

(SOR SMC Pg No.5 It No. 53)

Providing and fixing FRP frame size 125x65 mm and

mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides &

edges in Gel coat finish. The core of the shutter & frame is to

filed up with injected polyurethane foam done in situ

alongwith embedded wooden pieces for stiffening & also

20 taking hinges & fintures. The whole FRP frame & shutter is to

be water proof weather proof, termite proof & resistance to

mild acid/alkali. Rates are to be inclusive of S.S. hinges with

fastener sleeve & alluminium fixtures & fastenings.Product

should have 3 years perormance guarantee and company

have ISO 9001-2000 certificate.For all Floors.

(A)'Same as Above But Without Frame 10.00 S.M 2019.98

(SMC SOR,Pg No.5, It No. 55)

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Providing & fixing 35mm.th. Flush Door Solid WORK ABOVE

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

specified by the manufacturers. The laminate shall be as per

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws

& Anodized aluminum fixtures & fastenings For all Floor

(SOR SMC Pg No.5 It No. 51) MR

Same as Above But Without Frame

All Floor 20.00 S.M 2520.00

(SOR SMC Pg No.5 It No. 52) MR

Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 63.50 x

x1.95 mm (of Jindal section no.4605, @ Wt. 1.094Kg/mt)

horizontal Two track member size 61.85 mm x 31.75 mm x

1.20 mm (of jindal section no:8687, @ Wt. 0.695 Kg/mt.)

vertical member of size 61.85 mm x 31.75 mm x 130 mm (of

jindal section no:8758 @ wt. of 0.659 kg/mt) with sliding

shutters of horizontal member size 40 mm x18 mm x

22 mm ( of jindal section no:8949, @ Wt. of .456 Kg/mt) vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8947, @ Wt. of 0.456 Kg/mt/section 8948, @ Wt. of

Kg/mt) with 5 mm thick tranparent bronze colour tineted

float glass with powder coated aluminium fittings and

fixtures and transparent silicon sealant glass fixing to frame

as per details etc. complete for window.For all Floors.

(A) Same as above but colour anodized 0.00 S.M 1705.67

SMC SOR Alluminium Work ITEM NO.3(A),Pg No.17

Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

mm x 1.30 mm (of jindal section no;8688, @ Wt. 1.07 Kg/mt),

vertical member of size 92 mm x 31.75 mm x 1.50 mm (of

jindal section no:8933, @ Wt. 1.06 Kg/mt) with sliding

shutters of horizontal member size 40 mm x 18 mm x

23 mm (of jindal section no:8947 @ wt. of 0.456 kg/mt), vertical

member of size 40 mm x 18 mm x 1.29 mm (of jindal section

no:8949 @ wt. of 0.456 kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated

aluminium fittings & fixtures and transparent silicon sealant

glass fixing to frame as per details etc.

(A) Same as above but colour anodized

All Floor 32.00 S.M 1591.87

SMC SOR Alluminium Work ITEM NO.2(A),Pg No.17

Providing and fixing standared extruded of aluminium

section of size 61 x 37.0 x0.90 mm (of Jindal section

no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated

alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc. complete for fix

window 0.00 S.M 1833.29

A) Same as above but Colour anodized 2.50 S.M 1833.29

SMC SOR Alluminium Work ITEM NO.5A

Providing & laying granite slab 18mm thick in Window-

Door seal Frame Etc laid on 10mm thick cement mortar

1:4 (1 Cement : 4 Coarse sand) with nessary adhesive

25 material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp.. (Basic Rate:-

For all Floors. 49.00 S.M 2026.00

SMC SOR , PAGE No.4 ITEM NO.41

Labour Charges For Edge Finished For Granite for all floors

For all Floors. 481.00 R.M 43.43

SMC SOR, PAGE No.4 ITEM NO.42

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Providing & fixing Powder Coated Aluminium WORK ABOVE

and partly panelled partition using medium duty sections

of Hindalco,Zindal, Narmada, Banco or Equivalent approved

make having section 63.50 mm x 38.10mm ( Frame-.758

kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with

mm thick clear float glass of approved make including all

other necessary fittings and fixtures. Entire work will have to

27 be made water proof using necessary rubber sectioned

wherever required. Gaps all round the frame to be filled with

approved water proof sealent. Bottom portion of doors both

side to be covered with 12mm thick prelaminated particle

board of approved make and quality and as per design.

(A) Same as above but Colour anodized

For all Floors. 67.00 S.M 2400.00

SMC SOR, PAGE NO 16 IT NO 7(A)

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco,

Jindal , Narmada,Banco or Equivalent approved make having

Poder Coated outer frame Leg Partition section of

mm x 38.10 mm having weight 1.158 kg. / R.M. shutter

section having size 83.5 mm x 44.45mm ( top & bottom:

1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical

28 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing

side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid

frogting and 12 mm thick prelaminated sheet of Greenlam,

Panama or archid make as approved by Engineer-in-charge

including fixing brass pivot, handle, lock etc. complete.

(A) Same as above but Colour anodized

For all Floors. 6.00 S.M 3237.00

SMC SOR, PAGE NO 16 IT NO 6(A) MR

Providing and fixing M.S. grills of required pattern to

frames of windows etc., with M. S. flats at required spacing

and frame alround of square or round bars with round

headed bolts and nuts or by screws including applying

priming coats of red oxide etc. complete.For all Floors.

(A) Plain grill

For all Floors. 630.00 Kg. 109.41

SMC SOR, PAGE NO 5 IT NO

Painting two coat (excluding priming coat) on new steel and

other metal surface with synthetic enemal paint, burshing to

30 give an even shade including cleaning the surface of all dirt,

dust and other foreign matters. (A) For plain grill For all

For all Floors 32.00 S.M 68.57

SMC SOR, COLOUR IT.No. 8, Pg No.15

Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

31 bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing

accessories such as nuts, bolts, fasteners etc.).

SMC SOR, ITEM NO 120,Pg No.11, MR 126.00 Kg. 450.00

(1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

32 prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as

directed. (M.R.)

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

B) Providing and laying integral cement based WORK

waterABOVE PLINTH

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations. (a) Applying and grouting a slurry coat of

neat cement using 2.75 kg/sqm of cement admixed with

proprietary water proofing compound comforming to IS:2645

over the R.C.C. slab including cleaning the surface before

tratment.(b) Laying cement concrete using broken bricks/brick

bats 25 mm to 100 mm size with 50% of cement mortar 1:5 (1

Cement : 5 Coarse sand) admixed with proprietary water

proofing compound conforming to IS:2645 ,brick bats is finally

covered by jointless cement plaster 20mm th. in C.M. 1:4 added

with special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered marking

of 300 mm.size.The treatment is carried along the vertical

surface of the parapet & other adjoining wall up to height of

about 300 mm in a shape of quarter round vata Incl. curing etc.

Comp. With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.(c) The whole terrace so finished

shall be flooded with water for a minimum period of two weeks

for curing and for final test. All above operations to be down in

order and as directed and specified by the engineer-in-charge.

With average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

(c) The whole terrace so finished shall be flooded with water

for a minimum period of two weeks for curing and for final

test. All above operations to be down in order and as directed

and specified by the engineer-in-charge. With average

thickness of 120 mm and minimum thickness at khurra as

mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 40.00 S.M 511.00

SMC SOR, PAGE NO 6 IT NO 62-B M.R.

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,kitchen

and the like consisting of :(a) I course of applying cement

slurry @ 4.4 kg/sqm mixed with water proofing compound

conforming to IS : 2645 in recommended proportions.(b) II

course of a layer of plaster in C.M. 1:3 with water proofing

compound confirming to IS:2645 about 25 mm. th' in the

floor of the depression & about 18mm th' On the side walls of

the depression up to the floor level, water proofing plaster

about 18 mm. th' be continued on the walls above the floor

level for a height of 600 mm. with surface suitable to receive

further treatment (c) Finishing top with stone aggregate

10mm to 12mm nominal size spreading @0.008 C.M./S.M.,

thoroughly embedad in plaster layer. as per specifications &

instructions of Engineer in charge (Cement consumption

0.316 Bags / S.M.)

For all Floors 60.00 S.M 296.00

SMC SOR, PAGE NO 6,IT NO 62-A M.R.

Providing and laying broken chine mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glased tiles

of to be laid over cementr morter 1:3 to plain or slope and to

33 be tempered to bring morter crème out up to surface using

white cement including grounding off jnctions and extending

them up to 15 cm along the wall, clearing with water and

oxalic acid etc as directed.

SMC SOR, PAGE NO 12 IT NO 131 40.00 S.M 779.70

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to give

34 an even shade including thoroughly brushing the surface free

from mortar dropping and other matter and sand papered

(A) for wall and similar surfaces

For all Floors 1065.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 426.00 S.M 40.59

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

SMC SOR, COLOUR IT.No. 4, Pg No.15 WORK ABOVE PLINTH

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

35 surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 1065.00 S.M 83.36

(B) for ceilings and soffits

For all Floors 426.00 S.M 83.36

SMC SOR, COLOUR IT.No. 5, Pg No.15

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

manufacturers. Surface Preparation : surface is thoroughly

clean, dry and free from all loose dirt, chalk, grease, fungi,

algae and flaking paint. This can be achieved by brushing

36 with a wire/ stiff coir brush, followed by water jetting if

required. Fill up all minor cracks and defects with white

cement and sand mixture in the ratio 1:3. For application on

previously painted wall, previous coatings of paint must be

thoroughly scraped off and Clean the surface thoroughly

using wire brushes. Priming: Apply a liberal coat of exterior

acrylic primer and allow it to dry for 4-5 hours. Application of

putty is not recommended. Minimum 4-6 hours duration is

required between each coat of weather shield max paint

For all Floors 953.00 S.M 82.00

SMC SOR, colour works,Pg No.15,item no.-17

Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

37 mortar 1:1.5 laid and finished with flush pointing in white or

colour cement including rubbing and polishing complete.

(Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 12.00 S.M 2410.00

SMC SOR 15-16, PAGE NO 4,IT NO 39 M.R.

Providing & laying granite slab 18mm thick in skirting,

risers of steps, dedo and pillars laid on 10mm thick

cement mortar 1:4 (1 Cement : 4 Coarse sand) and finished

with flush pointing in white or colour cement including

rubbing & polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

SMC SOR 15-16, PAGE NO 4,IT NO 40 M.R. 7.00 S.M 2449.00

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia M.S.

bar bent to shpe with hooked ends to RCC slabs curing, layig

including painting the exposed portion of loops, all as per

standard design complete.

For all Floors. 20.00 Nos 135.47

SMC SOR , PAGE NO 5, IT NO

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists channels

40 angles, tees, flats with connection plates or angle cleats as in

main & cross beams,hip & trussed purlins connected to

common raffers & the like. For all Floor

For all Floors. 5.00 Qtl. 9108.48

SMC SOR ,Pg No.9,IT NO 98(A)

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Providing & fixing in position collapsibleWORK

shutters PLINTH

with vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

41 40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Ground Floor 11.00 S.M 6158.35

SMC SOR , PAGE NO 5, IT NO

Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S. laths inter locked together through their

entire lenght and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket plates,

42 guide channels and arrangements for inside and outside

locking with push-pull operation including the cost of hood

cover and spring etc. complete. (B) Shutters having width

3.5 M and above

Ground Floor 0.00 S.M 4546.01

SMC SOR , PAGE NO 12, IT NO

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

43 with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost- Rs. 450/S.M.)

SMC SOR, PAGE NO.7,IT NO 66 (MR) 0.00 S.M 1050.00

44 Wall Vinyl Sticker 40.00 SqFt. 28.00

SMC SOR, PAGE NO.13,IT NO 146 (MR)

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100

SMC SOR, PAGE NO.13,IT NO 147 (MR)

Solvent Vinyl Sticker (120 gsm) with Lamination (100 gsm)

SMC SOR, PAGE NO.13,IT NO 148 (MR)

47 5mm PVC sheet Eco Vinyl (Any size) 40.00 SqFt. 55.46

SMC SOR, PAGE NO.13,IT NO 149 (MR)

Decorative theme base designing & painting with all

waterproof materials

SMC SOR, PAGE NO.13,IT NO 150 (MR)

TOTAL COST OF SUPER STRUCTURE

Water Supply & Sanitation

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

100 mm size "P'or "S" trap for water closet squatting pan

49 joining the trap with the pan & soil pipe in C.M. 1:1 (1cement

:1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware

C0117CS/C0117*,Jaquar,HindWare

For all Floors. 0.00 Nos. 3277.39

SMC sor- Sanitary Items,Page no20, It No.

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap including jointing the trap

with soil pipe in cement mortar 1:1 (1 cement : 1 find sand)

(seat and cover to be measured and paid for separately) (A)

Viterous china pattern - I (i) in approved colour

Make- Cera CONVENTIONAL B1510121 , Parry ware C0297*/

C0278,HindWare sleek 20011, Jaquar- CNS-WHT- 5.00 Nos 3530.09

SMC sor- Sanitary Items,Page no20,It No.

Providing and fixing plastic seat and cover for wash down

51 water closet with C.P. brass hinges and rubber buffers (B)

Plastic seat and cover.

For all Floors. 5.00 Nos 291.33

SMC sor Page no7 It No.

Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with C.I. or

52 M.S. Brackets painted white incl. cutting holes & making good

the same etc. complete. For all Floor

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Make- Cera Cat. No. S2040121, Parry wareC0434* ABOVE PLINTH

Jaquar SLS- WHT -6801 ,HindWare10004

SMC sor- Sanitary Items,Page no20,It No.

Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet

or plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

All Floor 3.00 Nos 859.41

SMC sor Page no7 It No.

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

SMC sor Sanitary Items,Page no20,It No.

Providing & Fixing 15 mm Dia bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F2013151 BIB COCK, Parry ware G3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB COCK 8.00 NO 1353.77

SMC sor Sanitary Items,Page no20,It No.

Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

KN , CONCEALED BODY ALD-081,HindWare F280052 & 8.00 NO 2056.47

CONCEALED STOP COCK F850105

SMC sor Sanitary Items,Page no20,It No.

Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting and

making good the wall where required.

Make- Cera, Parry ware,HindWare

For all Floors. 4.00 Nos 1564.36

SMC sor- Sanitary Items,Page no20,It No.

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners &

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 3.00 Nos 924.24

SMC sor Sanitary Items,Page no20,It No.

Providing & Fixing stainless steel recessed type Soap dish of

59 approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare

For all Floors. 3.00 Nos 839.91

SMC sor Sanitary Items,Page no20,It No.

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 110x110 mm diameter with jali of the following

60 nominal diameter of self cleaning design with C.I. scread

down or hinged grating including the cost of cutting and

making good the walls.

All floor 5.00 Nos 586.27

SMC sor.Page no 8,It No.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type"B") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

Finolex make for soil and waste discharge system at all floor

levels incl. All fixtures like bends, tees,shoe etc. jointed with

resin of approved brand & manufacture etc. comp.(M.R.)

SMC sor,Page no 8 It No. 84 M.R.

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/ Finolex

62 make for rain water at all floor levels incl. fixtures like bends,

tees, shoe etc joined with resin of approved brand &

manufacture etc. comp. (M.R.)

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

(B) 110 mm. Dia. WORK ABOVE PLINTH40.00 R.M 325.00

SMC sor ,Page no 8, It No. 85 M.R.

Providing and fixing in position P.V.C. cowl vent to pipes of

63 prince, suprime, jain Or Eqivalent make etc. comp (M.R).

SMC sor- Page no.8, It No.

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

64 thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. For

75mm PVC pipe 40.00 R.M 173.00

SMC sor- Page no 8, It No. 93 MR

Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

65 wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

SMC sor Page no 8 It No. 86 MR

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand & manufacture

66 etc. comp. Pipe shall be fixed on the wall the help of clamp at

every two meter C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including

cost of all materials.

SMC sor Page no8 It No. 87 MR

Providing and fixing M.S. holder bat clamps at all floor

level,of approved design to C.I. or S.C.I pipes including cost of

cutting holes and making good the wall etc. comp. (M.R)

SMC sor- Page no 8, It No.

Providing and fixing G.I. holder "Z" clamps at all floor level,of

68 approved pipes including cost of cutting holes and making

good the wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00

SMC sor- Page no 11, It No. 121 M.R.

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

SMC sor Page no8,It No.

Providing and fixing abonite ball cock of approved quality as

directed etc. comp.

SMC sor- Page no 8,It No.

Providing, Lowering and laying joining R.C.C. NP2 CLASS pipe

in cement mortar in proportion 1:1 of following nominal

internal diameters including testing of pipes and joints etc.

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

(A) 150 mm. dia. WORK ABOVE PLINTH 20.00 R.M 248.67

SMC sor- Page no.7, It No.

SMC Storm drainage SOR 22-23, Page no1 It No.1

Providing and fixing s.w. Gully trap with C.I. gratting brick

masonary chamber and water tight Pre cast R.C.C.cover of

300mm X 300mm size (inside) including plastering smooth

inside and outside 15 mm thick in C.M 1:3 etc. comp.i) square

mouth traps (A) 100 MM X 100 MM Size - P type.For all

SMC sor,Page no 7, It No. 73 2.00 Nos 1292.19

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap

chamber with 23 cm th' B.B. masonary walls in C.M 1:5 with

cement plaster 15 mm th' in C.M. 1:3 inside & outside to

73 exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 0.00 No. 3166.77

Sand : 4 Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be not less

than 38 kg. On top etc. comp. for single pipe.'.(A) Precast RCC

heavy duty Cover instead of C.I. Cover

(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 233.85

SMC sor, Page no.7, It No.75

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed faces, R.C.C. top slab with

1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm

size), Foundation concrete 1: 5: 10 & fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside

dimension, 455 x 610 mm &450 mm deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt.beyond 0.45 mt. 0.00 Each 242.39

SMC sor - Page no7,It No.76

Providing and fixing C.I. manhole cover 0.60 mt. x 0.45 mt.

75 size having weight not less than 35 kg. etc. complete.

SMC sor- Page no.8, It No. 83 2.00 NO 958.17

Providing and fixing G.I, Rain water spout of 50 mm dia and

SMC sor- Page no 6 It No. 64 6.00 NO 101.91

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

77 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe to

wall with C.P. flange complete including cutting and making

good the walls and floors wherever required.

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT 13261H ,HindWare BACK SMALL 60001 3.00 NO 2535.70

SMC SOR- Sanitary Items,Page no.20, It No.8

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

78 with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost Rs. 450/S.M.)

SMC sor- Page no7 It No. 66 3.00 S.M 1050.00

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Providing & laying ordinary C.C.1:1.5:3 mixWORK ABOVE

for R.C.C. PLINTH

incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom

slab & side pardi for under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm th'

79 C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4 outside

wall, inside R.C.C. pardi as per design, 10mm.th. water

proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face of tank curing

etc. comp. incl. Locking arrangement, outlet, inlet, overflow

& wash out pipe arrangement as necessary & C.I. Cover 0.60 x

.045 weight not less then 35kg. etc. com. as per structural

drawing excluding Steel & as directed by Engineer-in-charge

Under Ground water Tank 0.00 Lit 6.87

SMC sor - It No.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels, in

flooring, treads of steps & landings laid on a bed of 12 mm.

Av. Th.C.M.1:3(1cement :3 sand) finished with flush pointing

in white cement etc.com. For all floors

Under Ground water Tank 0.00 SM 900.29

SMC SOR, Page no4, It No.

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor levels in

skirting risers of steps & dado on 10 mm. th. C.M.1:3

81 (1cement :3 sand) including necessary cement paste for

fixing and joined with white cement slurry etc.complete. For

all floors (Basic Rate:- Rs.285.0/S.M.)

Under Ground water Tank 0.00 SM 932.02

SMC SOR, Page no4, It No.

Providing & fixing IS Mark TMT Bar FE 500 / FE 500D

82 reinforcement for R.C.C. work incl. bending, binding & placing

in position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 0.00 Kg. 77.29

SMC SOR- Page no1, It No.

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace.

SMC SOR- Page no 8, It No.

Total cost of Water supply & sanitation

SOR - Tender Rate Total

2023-24 Description of Work/ Item Qty Unit with 1% Cess, Amount with 1%

w/o GST Cess, w/o GST

Part-01 Internal Wiring

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be

erected Open/ concealed in/ on surface on wall/ceiling complete

with 6A Modular type switch / bell push & accessories and earth

1 1-2-1 continuity of following type, erected on PVC / Metallic box, single 120 Point 485.81

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories - Cat III

2 1.1.4 Point Wiring for Secondary Light Point 30 Point 167.66

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Point wiring for FAN with 2-1.5 sq.mm & earth wire WORK ABOVE PLINTH

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected Open/

concealed in / flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed. (a) with medium

class Rigid PVC pipe and accessories Cat.III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected Open/ concealed in /

on surface of wall / ceiling complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic box covered with appropriate front

4 1-2-3 plate modules erected on / in wall / ceiling as per pi pe erected with 60 Point 510.05

following type of accessories.

[I] For 6A Plug with 2-1.5 sq.mm Cu. Wire (a) with medium class Rigid

PVC pipe and accessories Cat. III

(f) with medium class Rigid PVC pipe and accessories

[II] For 16A Plug with 2-2.5 sq.mm Cu. Wire

(f) with medium class Rigid PVC pipe and accessories

[III] For 16A Plug with 2-4 sq.mm Cu. Wire Cat III

(f) with medium class Rigid PVC pipe and accessories

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC / Metallic box, single mounting base frame

7 1-2-4 covered with textured / metallic front plate modules erected on / in 60 Point 257.55

wall / ceiling with following type accessories Cat. III

Providing following type of Modular Type Accessories mounted with

pvc / metallic box, single mounting base frame covered with textured /

8 1-2-6. metallic front plate , modules erected with necessary connection. As 25 Each 25.25

desired by Engineer In charge

(7) Blank Plate Single Cat. III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

9 1-4-1. conductor FRLS PVC insulated stranded wire of green color for earth 120 Mtr. 62.62

continuity of following size

(a) with medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

10 1-4-1 conductor FRLS PVC insulated stranded wire of green color for earth 120 Mtr. 82.82

continuity of following size (f) with medium class Rigid PVC pipe and

(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

11 1-4-2 stranded wire of green color for earth continuity of following size (a) 120 Mtr. 112.11

with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm

Subtotal Part-01

Part-02 Indoor Light Fixtures

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Supplying and erecting LED indoor fittings with LEDsWORK ABOVE

of wattage 0.2 PLINTH

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of co-extruded polycarbonate channel with

diffuser part in needed opal finish with company mark/name 160V to

270V, Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

1 2-15-1 LED driver efficiency > 85 % 60 Each 373.70

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Tube Light with integral/ non-integral driver

(iv) 22-24Watts, Surge - 2KV,IP-20, 4 feet

(B) LED Lamps integral type,cool white with PC diffuser suitable for B22

2 2-15-2 LAMP holder 30 Each 112.11

(b) 5 to 8 watts

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

3 CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

2-15-3 LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips complete.IP20

(ii) 11-15 watts, Surge-2 KV 20 Each 427.23

(iv) 22-24 watts, Surge-2 KV 15 Each 758.51

Subtotal Part-02

Part-03 LT Switchgear, Distribution Boards & LT Panel

busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet,

dust & vermin proof having hinged door with rubber gasket and

necessary busbar supports with COPPER busbar having current density

not more than 1.6 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulation tape for phase sequence, three

phase & neutral each suitable for following current capacity with

necessary painting mounted on wall or pedestal frame of required size

with necessary connections.

(A) Suitable for 63/100 Amp. capacity

Providing and erecting Sheet Steel powder coated MCB Distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, confirming to IS 8623-1 & 3 without MCB to house

2 3-11-5 appropriate nos. of MCBs. (The DBs should be used of same company 4 Each 1152.41

of MCB to be used)

(A) Single phase incoming and horozontal single phase outgoing (b)

Sheet Steel Double Door (IP-43) (iii) 8 way

Miniature circuit breaker single pole 0.5 A to 2A suitable to operate

on 240 V A.C. system and having overload and short circuit

3 tripping elements and breaking capacity 10 KA to be erected in 30 Each 270.68

existing M.S. box confirming to IS 8828/1996 with ISI mark. (For

each Fitting) Cat.III

Miniature circuit breaker single pole 6 A to 25 A suitable to operate

on 240 V A.C. system and having overload and short circuit

4 tripping elements and breaking capacity 10 KA to be erected in 30 Each 112.11

existing M.S. box confirming to IS 8828/1996 with ISI mark. Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Approved make ELCBs / RCCBs conforming to IS: 12640 WORK ABOVE PLINTH

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V. having characteristic of

6 3-12-1. quick action & tripping with all advance feature & do not incorporate 2 Each 1969.50

any electronic component. for following Max. rating erected as

directed. Cat III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having

7 3-12-2. characteristic of quick action & tripping with all advance feature & do 2 Each 3040.10

not incorporate any electronic component for following Max. rating

erected as directed.

(iii) 63 Amps. FP - Cat III

Subtotal Part-03

Part-04 Earthing System

Providing & Erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in

1 specially prepared earth pit complete with necessary 8 SWG earth wire 12 Each 540.35

with using salt and charcoal / coke as required for pipe type earthing.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25 mm having 200-250 Micron galvanising, connection terminal

dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty

cover.(approved make OEM has to submit test certificate) & having

2 3-14-9 back filling compound of (B) Inner chemical (CCM Compound)- 1 Each 4591.46

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:-

< 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture

for long time Necessary test report must be submitted. (a) For

Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make safe Earthing Electrod consisting Pipe-in-Pipe

technology as per IS 3043-1987 made of corrosion free G.I.Pipes

having Outer pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection

terminal dia of 14 mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover

(Approved OEM has to submit test certificate including value of earth

resitance of installtion)

[A] For Electrical Installation up to 440V

-Length of Pipe : 1 Mtrs.

-Back filling Compound :1 nos Bags of 15 Kg.

Subtotal Part-04

Part-05 Outdoor Lighting

Supply of approved make GRP / FRP Pole having following

specifications: GRP / FRP Light Pole made by Centrifugal moulding

process using thermoset resin polyester/epoxy resin system) having

minimum 45% glass content. The pole should be in one piece and

tapered round in shape, having smooth finish and should be totally free

from corrosion as well as non conductive & shock proof Pole should

be provided with FRP Anchor Base and it should be heavy duty, or MS

Material duly painted with Epoxy paint. The Pole should be mechanical

propertes as followed:(1) Specific Gravity (ASTM D 792)- 1.3 to

Kg/m3 (2) Glass content % by weight (ASTM D 2584)- 45 to 55% (3)

Water Absortion (ASTM D 570)-<0.5% (4) Tensile Strength (ASTM D

638)- 20050MPa (5) Flexural Strength (ASTM D 790)-

250±50MPa (6) Compressive Strength (ASTM D 695)-

200±50MPa(7) Yield Strength (ASTM D 638)-250±50MPa

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Pole should be flame retardant as per IS 6746. ResinWORK ABOVE

used shall be UV PLINTH

resistance and pigmented. A highly weather resistant polyurethane

coating shall be applied to the pole after applying suitable primer

system that ensures proper adhesion of the paint. Minimum coating

thickness shall be 80 to 100 micron. Deflection of the pole shall not

exceed more than 10% of the length of pole for the given load“. Pole

2 should be generally made as per the dimensional data, performance

criteria and some interchangeability features of poles as per standard

ANSI C 136.20 latest version or ASTM D 4923/01 . The size of pole and

type of installation are as below . The size of the pole and type of

installation with foundation, Anchor base plate, internal junction box as

per manufacture details and site requirement.

(1) 'A' class frp/grp pole suitable for base plate mounting

[B] Overall Length of 4.0 meter, Average thickness : 4mm, Top/Bottom

Outside Dia. 76/143mm +/-2.Weight of Pole 10.0 Kg approx. (Without

base) Metal Anchor Base dully frp claded (Size : 290 Ø * 12mmthk

Mounting hole PCD 240mm * 4 nos. of 16 Ø hole)

C] Overall Length of 5.0 meter, Average thickness : 5mm, Top/Bottom

Outside Dia. 76/160mm +/-2.Weight of Pole 17.0 Kg approx. (Without

5 6-1-7(A). base) Metal Anchor Base dully frp claded (Size : 310 Ø * 12mmthk , 0 Each 11548.34

Mounting hole PCD 260mm * 4 nos. of 16 Ø hole)

[D]Overall Length of 6.0 meter, Average thickness : 5mm, Top/Bottom

Outside Dia. 76/176mm +/-2.Weight of Pole 19.0 Kg approx. (Without

base) Metal Anchor Base dully frp claded (Size : 340 Ø * 12mmthk

Mounting hole PCD 285mm * 6 nos. of 20 Ø hole)

SETC of FRP/GRP bracket for GRP/FRP pole manufactured by centrifugal

moulding process

15' arm with 50mm OD pipe 5 mm thick, 1000 mm long from pole

(A) Single Arm Bracket 2 Each 1900.82

(B) Double Arm Bracket 0 Each 2413.90

Supplying and erecting Street light pole bracket comprising main B

Class GI pipe of 4.2 cm/require outside dia. complete with

suitable B Class G.I. sleeve tubing of approx. 45cms.length and

suitable for 76.5mm/80mm/require size of pole top having nuts

and bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg.with vertical plane and suitable welded

stiffener reducer and nipple with check nut complete painted

8 6-5-4-b with one coat.of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr 2 Each 491.87

[B] Double Arm Bracket 0.5 Mtr 0 Each 622.16

[C] Three Arm Bracket 0.5 Mtr 0 Each 743.36

[D] Four Arm Bracket 0.5 Mtr 0 Each 889.81

Providing & Constructing 1:2:4 CC foundation of 6 m long ( Foundation

Supplying & erecting approved make SMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with bakelite

connector strip 5way (3P+N+E) & hinged doors having locking

10 6-4-3. arrangements with mounting clamp with nuts, bolts & washers suitable 1 Each 515.10

for erection on pole with cable clamps& earth bolt of following size of

(b) 250mm x 200mm x 100mm [deep]

(C) Post Top Lantern LED fitting comprises of Copper dust finish cast

aluminum spigot and spun aluminum canopy fixed with opal

11 2-16-2 polycarbonate, pipe arrangement for vertical mounting,open 6 Each 4819.72

construction driver and accessories wired upto terminal block. IP65 (b)

Min. 32 W to 40W - Cat III

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Supplying and erecting LED street light / Flood light fittings ABOVE

power White LEDs wattage of 1Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or embossed

120 to 300 V,Power Factor more than 0.95, THD < 10 %, CCT 4000K,

Uniformity ratio >0.45, Luminaire efficacy> 85 lumens/watt . LED driver

efficiency > 85 %.

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.)

make LED used for luminaire. ( Each fittings required LM-79 & LM-80

(A) Street Light (IP-65), Surge -4KV(Internal) & 10KV (External)

(i) above 36 watts to 48 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV

(iii) above 60 W to 90 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV

(iv) above 90 W to 120 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV & 10KV (External)

(v) above 120 W to160 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV & 10KV (External)

(vi) above 160 W to 200 watts Cat-III

(B) Flood Light (IP-65), Surge -4KV & 10KV (External)

(vii) above 200 W to250 watts Cat-III

SITC of CCMS Section Pillar with System with Communication Facilities

and Centralized Control and Monitoring (cluster/ group control) (Rate

Includes Sim & Data Charges)

SITC of CCMS Section Pillar with System with Communication Facilities

and Centralized Control and Monitoring (cluster/ group control) (Rate

Includes Sim & Data Charges)

Painting the number and words for (st.light pole numbering and back

ground of colour as per Zone Code) inventory Identification on erected

fittings/ equipment's or such accessories as may required with good

20 MR quality of enamelled paint. The numbering and back ground of colour 0 Each 58.00

shall be as per Zone Code on.

(i) up to 20 characters, Up to 75 mm Height.

Subtotal Part-05

Part-06 LT Cables & Cable Termination

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(B) 3 1/2 core 35 Sq. mm ( 16 Sq.1/2 mm core)

(C) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) 0 Mtr. 284.82

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

2 4-3-4. necessary clamps or in existing trench / pipe of following size of cables 120 Mtr. 126.25

(b) 4 core 6 Sq. mm

Supplying & erecting Flexible PVC insulated multistrand multicore

KV grade ISI marked Copper Wires of following Size to be erected as

h) 2.5 Sq.mm 3 core round PVC sheathed

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

connecting accessories of same material at required depth for laying

5 4-5-8. of cable. below ground / road surface for enclosing cable and back 50 Mtr. 62.62

filling the same to make ground as per original.

(A) Outer dia. 50 mm

Making trench in soft soil of suitable width of 90 cms deep for laying

6 4-5-1. cable or locating the fault all over the run and backfilling the same and 30 Mtr. 55.55

making the surface as normal ground.

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

Making trench in Hard Murrum / Tar Road of suitableWORKwidth ofABOVE

required depth for laying any size of cable or locating the fault all over

7 the run and back filling the same and making the surface as normal

(B) If additional machinery like hammer driller or JCB use [Add] 2 Mtr. 357.54

Providing & laying 150 mm dia. R.C.C. hume pipe for cable to be laid

90 cms below ground across the road crossing or on floor with

necessary material in approved manner aand making the ground

as per original.

Cable Termination

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

(c) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with

rubber ring for PVC insulated armoured cable complete with out going

11 4-6-2. tails, insulating tape etc for following size of cables. 0 Nos 66.66

(a) 3 core 35/50 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool &

12 4-7-1. connected to switchgear terminals with brass/cadmium plated nut 0 Nos 6.06

bolts in an approved manner.

Subtotal Part-06

Part-07 Fan & Related Accessories

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan

with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz

1200 mm sweep complete having 3blades with aluminium blades with

, canopy & 30 cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S.

2 5-2-4. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. 50 Each 98.98

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

3 5-2-1 Pipe down rod erected duly painted for fan complete with necessary 50 Mtr. 108.07

24/ O.20, 3 core flexible wire with earthing.

Supplying and erecting approved make oscillating type bracket fan A.C.

23OV. 50cy/s 400/450 mm sweep wall mounted with height

6 5-4-2. adjustment and rotary tilting device complete with guard, flexible Core 0 Each 2534.09

plug top complete erected with lead wires as directed. Cat II

Subtotal Part-07

Part-08 Motor & Pumps

Supplying and erecting Direct - On - Line Starter with 18 A. rating

contactor and with 3.5 Amp. 18A range directly operated in totally

1 9-1-1.A insulated elegant enclosure for single phase operation up to 3 HP as 2 Each 2100.80

per IS 13947 complete erected on P.W. Block with necessary

connection. Cat II

Providing & erecting open well type horizontal mono block pump set

with stainless steel body having following specification

(B) 1 H.P. single phase open well motor pump set having discharge of

9-4-1. 185 LPM @ 25 mtr. head suitable for32 mm dia delivery pipe with

Supplying & erecting approved make Automatic liquid level controller

6A.as per instruction of Engineer in charge on site complete with wiring

connection with existing wires , with copper conductor from pump to

upper and lower tank.

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

flexible Submersible copper cable approved make of following Size.

(b) 3 Core x 2.5 Sq. mm.

Subtotal Part-08

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

WORK ABOVE PLINTH

Part-09 Water Coolers

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The

outlet temp. of the water should drop by 150C within a hour, The

water cooler should be comprising of hermetically sealed

1 8-13-2 compressor, fan motor, condensing unit, water tank surrounded by 1 Each 55893.40

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

2 MR SITC of Water Purifire Eureka Forbs Make AG 200 or Equivalent 1 Each 9415.25

Subtotal Part-09

Part-10 Intercom

Supplying, erecting, commissioning and testing analog EPABX

CMOS microprocessor based system having common features

With remote programming & remote dialing having following

other common features. Auto Call Disconnector- (Incoming -

Local- STD) with programmable timing- External Call forward

with DOSA- Walk in Class of service & trunk reservation- Boss

1 7-1-1 ring & call back on No Reply last caller recall CLI- Hot Line with 1 Ea. 12304.83

Delay & with No.- Unsupervised Conference- Serial DISA ( DISA

with option to dial another No. if Extn. is No Reply)-

Programming Flexibility of all features related to timer(

Timer)-10 Different group of out going call restriction like

97, 98 etc.Having following capacity.

(C) 4 incoming junction line & 12 extensions.

Supplying & erecting approved make Telephone Cable electrolytic

copper conductor PE insulation twisted in two pairs, & wrapped

with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer

Jacket suitable for telephone wiring & confirming to C-DOT

2 1-4-7 erected in existing pipe. of following size of conductors & nos.of 500 Mtr. 20.20

pairs. With necessary connections.

[A] Conductor Size 0.5 mm (a) Unarmoured

Subtotal Part-10

Part-11 Sound System

Supplying & erecting Amplifier having following specification:

Power Output :100 W (RMS):(130 W Max.)

inputs :5 Mics & 2 Aux.

frequency Response :50-15000 Hz+3db

Tone Controls :Cut & Boost type

Speaker Matching :4-8-ohms 70- 100 V line

LED Meter :5 LED Array.

The amplifier suitable to operate 240V A.C.& 24 volt D.C.

(Battery) with automatic changeover from AC to Battery

operation, duly protected by wrong Battery Polarity connection.

[[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Supplying &, Erecting speaker system comprising 50W handling

capacity with frequency response of 55 -200,00Hz & 16 Ohms

impedance with high efficiency 2Nos. of 8 inch full range

speakers housed in acoustically suspended enclosure.

[[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Supplying & testing wireless microphone system for 92.5 MHz

FM operation With effective range 200 feet with microphone

having facility for frequency adjustment & receiver with LED

indicator Telescopic antenna with battery cells.[[Approved by

Competent Authority i.e. not Below the rank of Executive

4 MR Audio Cable 15 Mtr. 1 Ea. 5345.22

5 MR Speaker Cable 50 Mtr. 134.32

6 MR Cable Manager 10 Mtr. 411.17

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

WORK ABOVE PLINTH

Subtotal Part-11

Part-12 Projector for Presentation

SITC of 3LCD Lamp based projector having wxga (1280x800) or

better resolution with minimum white brightness of

lumens and color brightness of 3800 lumens. The projector

should have minimum 1HDMI,1VGA input. Having contrast ratio

of 15000:1 or more. the projector should have auto vertical key

stone correction of +/- 30 degree and Manual Horizontal of +/-

1 7-11-1 30 degree. the projector should have optical lens, throw ratio 1 Each 33895.60

1.30-1.56:1. Zoom Factor of 1.2. Lens focus Manual having focal

length 16.9mm to 20.28mm. projector should have features like

AV mute slide, quick corner and split function and should

support wireless functionality with inbuilt wifi or wifi dongle.

[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

SITC of universal Projector mounting kit, with necessary

grouting, fasteners etc. with adjustable height and suitable for

all types of projectors. [Approved by Competent Authority i.e.

not Below the rank of Executive Engineer ]

SITC of Projector Screen 84 inch Self Lock MW (6 x 4) Instalock

Slow Retraction Screen, Aspect Ratio-4:3 [Approved by

Competent Authority i.e. not Below the rank of Executive

HDMI Cable 1.4: Supports Full HD (1080p) resolution and 3D

content. HDMI 2.0: Supports 4K resolution at 60Hz and High

4 MR 1 Each 3000.00

Dynamic Range (HDR). HDMI 2.1: Designed for 8K resolution,

120Hz refresh rates (15 mtr.)

Subtotal Part-12

Part-13 Air Conditioner

Providing and erecting Inverter based approved make split air-

conditioning unit consisting of condensing unit with variable

speed fan motor, inverter type hermetically sealed rotary

compressor with accessories etc. duly connected separately

erected evaporating unit and blower motor with its accessories

1 8-3-2. by means of extra supplied proper insulated copper 5 Each 63765.34

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly

green gas charging and 15A plug top & Remote Control & MS

Stand) with necessary core cutting.

(2)For ISEER Range (KWH/KWH)(4.0 to 4.49) (C)

for 1.7 to 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing open

2 8-3-5 or concealed including power and control cable,necessary PVC 25 Mtr. 965.56

drain pipes for Split AC machine up to 4 TR capacity

Supplying & erecting approved make LAN cable of following size in

3 1-4-8 existing pipe as per direction 300 Mtr. 47.47

Providing following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting base frame

4 1-2-6 covered with textured / metallic/white front plate , modules

erected with necessary connections as per site situation

directed by Engineer In charge.

5 (3) Two Pin/RJ-11 Telephone Socket

6 [A] For One Gang, Cat. III 5.00 Ea. 160.59

7 (7) Blank Plate Single, Cat. III 5.00 Ea. 25.25

8 (8) Computer RJ-45 socket, Cat. III 15.00 Ea. 160.59

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

Complete, Cat. III

Subtotal Part-13

(C) Electrical Total Part- 1 to 13

DESCRIPTION Qty. UNIT SOR 24-25 AMOUNT

WORK ABOVE PLINTH Add 18% GST

Notes: Total Amount mentioned in SCHEDULE-B are Including GST

Notes: Total Amount mentioned in SCHEDULE-B are Including GST

EXECUTIVE ENGINEER

SIGN OF CONTRACTOR SOUTH WEST (ATHWA) ZONE

SURAT MUNICIPAL CORPORATION