Loading…
Loading…
Tender Value
₹52.6 L
EMD Value
₹53,000
Closing Date
11 May 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer’s office, Valsad (R&B) Division,
Construction of Sakhi One Stop Centre at Valsad Ta. & Dist.Valsad
300982
49 of 2025-26
Open
Civil - All
Valsad
8 documents required · 8 mandatory
₹2,400
Executive Engineer, Valsad (R&B)Division, Valsad
₹53,000
4 May 2026
4 May 2026
4 May 2026
11 May 2026
4 May 2026
Name of work :-
Construction of Sakhi One Stop Centre at Valsad Ta. & Dist.Valsad
Bill of Quantities
(A) Percentage Rate Tender (Up to INR 50 Cr. )
Memorandum showing items of work to be carried out
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
1 Excavation for foundation upto 1.50 mt depth including Sorting out and 160.00 Cumt 117.08
stacking of useful materials and disposing the excavated stuff all lead &
lift (A) Loose or soft soil.
2 Excavation for foundation 1.50 mt to 3.00 mt depth including Sorting out 60.80 Cumt 162.56
and stacking of useful materials and disposing the excavated stuff upto
mt lead (B) Dense or hard soil
3 Excavation for foundation 3.00 mt to 5.00 mt depth including Sorting out 40.50 Cumt 175.97
and stacking of useful materials and disposing the excavated stuff upto
mt lead (B) Dense or hard soil
4 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 28.80 Cumt 460.19
including watering ramming and consolidating etc. comp.
5 Filling available excavated Earth (Excluding Rock) in trench plinth side of 195.00 Cumt 130.39
foundation . in layer not excluding 20 cm in depth consolidation each
deposited layer by ramming and watering etc. complete
6 Filling foundation and plinth with murrum or selected soil in layer of 20 cm 5.60 Cumt 289.06
in thickness including ramming watering and consolidating etc. complete
7 Applying general insecticide pest control treatment to floor,cupboards etc 135.20 Sqmt 59.04
including labour materials etc.complete.using lmidacloprid 30.5 Scas per IS
6313 part -III ( 0.075% concentration by mass ) is recommended 10.5ml
chemical diluted with 5 liter of water application 0.5 liter chemical / Sqm
of surface is recommended as per I.S.
8 Providing and laying controlled cement concrete M.150 and curing 13.30 Cumt 3894.07
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (A) Foundations and plinth
9 Providing and laying controlled cement concrete M.250 and curing 10.20 Cumt 4911.63
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (A) Foundations, footings,
and Mass concrete. footing
10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- 20.10 Cumt 3135.29
Crushed stone aggregates 40 mm nominal size) and curing complete
excluding cost of formwork in (A) Foundation and Plinth
11 Providing and laying controlled cement concrete M-250 and curing 8.80 Cumt 7647.72
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in Columns, pillars posts and
struts Columns up to Plinth
12 Providing and laying controlled cement concrete M-200 and curing 7.40 Cumt 7576.01
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in Columns, pillars posts and
struts Ground FLOOR
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
13 Providing and laying controlled cement concrete M-200 and curing 5.80 Cumt 7616.41
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in Columns, pillars posts and
struts First Floor
14 Providing and laying controlled cement concrete M-200 and curing 1.80 Cumt 7656.81
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in Columns, pillars posts and
struts Second Floor
15 Providing and laying controlled cement concrete M-250 and curing 13.40 Cumt 5830.73
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in Ground & Plinth BEAMS
16 Providing and laying controlled cement concrete M.150 and curing 10.90 Cumt 4245.03
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (C) Plinth Slabs
17 Providing and laying controlled cement concrete M.200 and curing 13.40 Cumt 6121.61
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (C) Ground floor Beams
18 Providing and laying controlled cement concrete M.200 and curing 7.70 Cumt 6162.01
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (C) First floor Beams
19 Providing and laying controlled cement concrete M.200 and curing 1.90 Cumt 6202.41
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (C) Second floor Beams
20 Providing and laying controlled cement concrete M-200 and curing etc. 1.50 Cumt 6197.36
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Chhajja for Ground floor
21 Providing and laying controlled cement concrete M-200 and curing etc. 1.00 Cumt 6237.76
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Chhajja for First floor
22 Providing and laying controlled cement concrete M-200 and curing etc. 0.30 Cumt 6277.17
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Chhajja for second floor
23 Providing and laying controlled cement concrete M-200 and curing etc. 1.20 Cumt 6839.72
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Lintel for Ground floor
24 Providing and laying controlled cement concrete M-200 and curing etc. 0.70 Cumt 6880.11
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Lintel for First floor
25 Providing and laying controlled cement concrete M-200 and curing etc. 0.20 Cumt 6919.50
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (c) Lintel for Second floor
26 Providing and laying controlled cement concrete M.200 and curing 14.50 Cumt 6502.38
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C) Ground floor Slab
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
27 Providing and laying controlled cement concrete M.200 and curing 7.40 Cumt 6542.78
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C) First Floor slab
28 Providing and laying controlled cement concrete M.200 and curing 2.60 Cumt 6583.18
complete including the cost of formwork but excluding the cost of
reinforcement for reinforced concrete work in (C) Second Floor slab
29 Providing and laying controlled cement concrete M-200 and curing etc. 3.80 Cumt 7163.93
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (E) Stair case up to floor
two level for Ground Floor to first floor
30 Providing and laying controlled cement concrete M-200 and curing etc. 2.40 Cumt 7203.32
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in (E) Stair case up to floor
two level for First Floor to Second floor
31 Providing and laying controlled cement concrete M-200 and curing etc. 4.00 Cumt 7806.29
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in RCC wall for First floor
32 Providing and laying controlled cement concrete M-200 and curing etc. 4.50 Cumt 7846.69
complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in RCC wall for Second floor
33 Providing and fixing 90 cm high Stainless steel railing made from 17.00 Sqmt 3698.62
anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge) as hand rail with
S S 304 grade Baluster of 38 mm dia (16Gauge) as a vertical support fixed
in RCC slab at 0.50m c/c including three horizontal S S pipes of 16 mm dia
(16Gauge) at eqal distance fixed including The Provisions in Nation
Building Code 2016, part,Annex:B-6.2 with baluster ,accessories as per
detailed drawing as directed etc. complete.
34 Providing TMT Bar FE 500D reinforcement for R.C.C. work including 16653.00 Kg 76.66
bending, binding and placing in position complete up to All floor Level
35 Brick work using common burnt clay building bricks crushing strength not 15.20 Cumt 4021.02
less than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1
cement : 6 fine sand) (B) Conventional For below plinth
36 Brick work using common burnt clay building bricks crushing strength not 25.40 Cumt 4295.99
less than 35 Kg/Sq.cm. in super structure above plinth level upto floor two
level in cement mortar 1:6 (1cement : 6 fine sand) (B) Conventional For
37 Brick work using common burnt clay building bricks crushing strength not 15.40 Cumt 4336.18
less than 35 Kg/Sq.cm. in super structure in cement mortar 1:6 (1cement :
6 fine sand) (B) Conventional For First Floor
38 Brick work using common burnt clay building bricks crushing strength not 10.10 Cumt 4376.37
less than 35 Kg/Sq.cm. in super structure in cement mortar 1:6 (1cement :
6 fine sand) (B) Conventional For Second Floor
39 Half brick masonry in common brunt clay building bricks having crushing 70.90 Sqmt 653.01
strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in
super structure.(B) Conventional for Ground floor.
40 Half brick masonry in common brunt clay building bricks having crushing 14.70 Sqmt 659.00
strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in
super structure. (B) Conventional for First floor.
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
41 Providing 20 mm thick double coat mala cement plaster on interior brick / 388.50 Sqmt 153.20
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :
Coarse sand) finished with trovel including scaffolding curing etc.
complete. For Ground floor
42 Providing 20 mm thick double coat mala cement plaster on interior brick / 194.40 Sqmt 176.59
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :
Coarse sand) finished with trovel including scaffolding curing etc.
complete.For first floor
43 Providing 20 mm thick double coat mala cement plaster on interior brick / 60.00 Sqmt 199.98
concrete work for plastering comprising of base coat of 12 mm thick
cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough
finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement :
Coarse sand) finished with trovel including scaffolding curing etc.
complete. For second floor
44 Providing 10 mm. Thick cement plaster in single coat for plastering on 106.00 Sqmt 140.95
ceiling and soffits of stairs and finished even and smooth in : (I) Cement
mortar 1:4 (1 cement : 4 sand) etc. complete.For .Ground Floor
45 Providing 10 mm. Thick cement plaster in single coat for plastering on 61.20 Sqmt 164.34
ceiling and soffits of stairs and finished even and smooth in : (I) Cement
mortar 1:4 (1 cement : 4 sand) etc. complete.For First Floor
46 Providing 10 mm. Thick cement plaster in single coat for plastering on 17.40 Sqmt 187.73
ceiling and soffits of stairs and finished even and smooth in : (I) Cement
mortar 1:4 (1 cement : 4 sand) etc. complete.For second Floor
47 20 mm Thick sand faced Gutka cement plaster on walls for all height 408.10 Sqmt 300.66
above ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1
cement : 3 sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement :
sand) with 1x1cm Groves at juction of structure member etc. complete.all
48 Providing and fixing 150 mm Wide approved quality chicken wire mesh at 121.00 Sqmt 54.54
junction of brick work and RCC work or two dissimilar surfaces, at all
heights fixed by nails, rowal plugs or tag by cement mortar 1:3 before
applying the plaster, including curing, scaffolding all complete as directed.
49 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 58.50 Rmt 42.17
50 Applying two coats of (white cement based) or (acrylic lappy (putty)) and 827.50 Sqmt 40.59
two coats of primer of approved brand and manufacture on new wall
surface to give an even shade including thoroughly brushing the surface
free from mortar dropping and other foreign matter and sand papered
51 Wall painting (Two coats) with plastic emulsion paint of approved brand 642.90 Sqmt 80.35
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
52 Wall painting (Two coats) with plastic emulsion paint of approved brand 184.60 Sqmt 85.76
and manufacture on undecorated ceiling surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
53 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex or 408.10 Sqmt 114.53
equivalent type) paint of approved brand and manufacture and of
required shade on exterior wall surface to give an even shade over and
including primery coat with Alkaly resistance primer of approved brand
after thoroughly brushing surface to remove all dust and remains of loose
powdered material etc. copm. for all height
54 Providing And filling with good quality sinder(steam coal) as directed by 0.80 Cumt 454.50
engineer in charge in sunks in layers of 30 cm thick,including
watering,placing ,ramming well etc as directed, for all floor.
55 Providing 20 mm thick Water proof cement plaster for sunk in single coat 2.70 Sqmt 300.98
on brick / conctrete wall for interor plastering up to floor two level
finished even and smooth (ii) cement mortar 1:3 (1- cement, 3 sand) and
mixing waterproofing materials of approved brand and manufacture in
cement mortar in proportion recommended by the manufacture for All
56 Providing and laying water proofing treatment by conventional method 125.50 Sqmt 947.38
including cleaning the slab surface by wire brush as directed including
provding first layer of C.M. 1:4 of 40 mm thickness mixed with water
proofing compound at rate prescribed by manufacturer, including putting
of brick bats of average thickness 40 mm Well immerssed in water laid
uniformly on first layer of mortar including applying cement slurry @ rate
of 0.08 bag/sqm. on fixed layer of brick bats including maintaining
necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water
proofing compound as directed, including finishing smooth with cement
slurry as directed complete.
57 Providing and laying controlled cement concrete M-200 for RCC work and 0.30 Cumt 6937.70
curing complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in coping on Ground Floor
58 Providing and laying controlled cement concrete M-200 for RCC work and 0.10 Cumt 6978.10
curing complete including the cost of form work but excluding the cost of
reinforcement for reinforced concrete work in coping on First Floor
59 Providing and fixing window having extruded aluminum Colour anodized 44.90 Sqmt 2099.79
section frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-
0.738/Rmt) horizontal Three track and horizontal & Vertical member of
size 92.00 mm x 31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with sliding
Three Glass shutters & One Shutter Mosquito Net of horizontal member
size 40mm x 18mm x 1.29mm ( @ wt.of 0.456Kg/mt), vertical member of
size 40mm x 18mm x 1.29mm with 5 mm thick transparent bronze colour
tinted float glass with powder coated aluminum fittings & fixtures and
Lock Strip , transparent silicon sealant glass fixing to frame as per details
etc complete for window.W,W1,W2
60 Providing & Fixing in position standard extruded approved colour anodised 2.60 Sqmt 1982.63
Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame
with 5mm thick Ground Glass Louvers and Fixed Mosquito Net For
ventilation including all required materials, fixtures, fastenning, labours
and equipments as per detailed drawing as directed. For Ventilators V
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
61 Providing and fixing in position collapsible steel shutters with vertical 6.30 Sqmt 2402.79
channel 20 x 10x 2 mm braced with flat iron diagonals 20 x 5 mm size with
top and bottom rails of T_rin 40 x 40 x 6 mm with 38 mm dia,steel pulleys
complete with bolts,nuts,locking arrangements,stoppers,handles including
applying priming coat with two coats of enamel paints etc.Complet.
62 Providing and fixing M S angle openable grilled Door having 65 MM. x 65 2.10 Sqmt 4139.99
MM x 6 MM size M.S. angled welded togather to make a box frame and
20mm dia M.S. bars to be fixed with it by drilling hole in the angle section
and welded at 10 cm C/C approx including anodized iron fixtures &
fastenings including primer coat of approved quality and two coats of oil
paint etc., complet as per detail drawing as directed.
63 Providing and fixing 35 mm thick flush door Double shutter, solid core 7.60 Sqmt 3150.19
with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one
,melamine faced three layred resin Flushed Door Having Decorative
Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM
HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle and
necessary Locking system of Godrej, zinc coated hinges ,fixtures &
fastenings etc directed by engineer in charge.D
64 Providing and fixing 35 mm thick flush door Single shutter, solid core with 14.70 Sqmt 3157.26
Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one
,melamine faced three layred resin Flushed Door Having Decorative
Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM
HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle and
necessary Locking system of Godrej, zinc coated hinges ,fixtures &
fastenings etc directed by engineer in charge.D1
65 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 9.50 Sqmt 2547.22
depress panel Single shutter having extra reinforcement on sides & edges
in Gel coat finish.The core of the shutter & frame is to be filed up with
injected fire retradat grade polyurethene foam done in situ along with
embeded wooden pieces for stiffening & also taking hinges & fintures.The
whole FRP frame & shutter is to be waterproof, weatherproof ,termite
proof & resistance to mild acid/alkali.Rates are to be inclusive of S.S hinges
with necessary screws & alluminum fixtures & fastenings & fartener
sleeve.Colour and Shade approved by Engineer-In-Charge. D2
66 Providing and laying machine cut machine polished Granite stone 49.40 Sqmt 1955.36
treads& risers and Copboards in Single piece Max length with 1cm
projecting, nozing rounded moulding in tread laid over 12 mm (avg.) thick
bases of cement mortar 1:6 (1-cement : 6-coarse sand) jointed with grey
or colour cement slurry including rubbing and polishing incl. making Three
No.s of grooves of size 3mm X 3mm along the length of treads etc.
67 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm 132.40 Sqmt 965.59
thick flooring over 20 mm (average)thick base of cement mortar 1:6 (1-
cement 6-coarse sand) and jointed with grey cement slurry mixed with
pigment to match the shade of slab including rubbing and polishing
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
68 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm 18.30 Sqmt 1089.67
thick in riser of steps,skirting dedo and pillars laid on 10 mm thick cement
mortar 1:3 (1-cement 3-coarse sand) and jointed with grey cement slurry
mixed with pigment to match the shade of slab including rubbing and
polishing etc.complete
69 P & L 60x60 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads 12.10 Sqmt 917.25
of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-
cement:3-coarse sand)finishing with flush pointing in colour cement slurry
etc. complete. Colour and Shade approved by Engineer-In-Charge
70 P & L 30x60 cm. Glazed Tiles 6 mm thick in skirting risers of steps and 71.60 Sqmt 1073.90
dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and
jointed with colour cement slurry
71 Providing and laying water proofing treatment with broken chine mosaic 123.10 Sqmt 747.29
flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles
to be laid over cement mortar 1:3 to plain or slope and to be tempered to
bring mortar creme out upto surface using white cement including
rounding off junctions and extending them upto 15 cm along the wall,
clearing with water and oxalic acid etc. as directed.
72 Providing and fixing pre-cast Rubber Dye inter locking concrete block 73.40 Sqmt 686.90
60mm thick with grade of concrete M300 pnumatic compressed/Vibrated
mechanically and as per approved design confieming to IS 15658:
including 35 mm Sand layer for levelling and filling the joint with sand in
proper line and level as per guidelines of IRC : SP 63-2018 etc complete.
73 Providing and fixing Mirrar polished 18 mm thick Green Marble stone in 96.00 Sqmt 1387.74
Single piece with full round edge and polished of approved quality in
clading on Cill & Jambs and around the doors/ windows/ ventilation with
12 mm thick cement motor CM (1:4) and fixing with cement slurry &
adhesive including moulding of exposed edges as directed by engineering
in charge etc. complete.
74 Providinfg and fixing Safty grills of required pattern for windows/ Door 948.00 Kg 109.08
using necessary M.S angle/ M.S pipe, M.S flats and other structural steel
at required spacing including cutting, welding and fabriction etc. including
one coat of primer of approved quality and two coats of oil painting as per
detail drawing etc complete.
75 Providing erecting and fixing double coated (ISI) water tank of required 4000.00 Litre 3.95
capacity each with all necessary fittings and connection etc. complete on
76 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe 45.00 Rmt 195.67
( SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of MS Z clamp at
every two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
77 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe 75.00 Rmt 148.12
( SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of MS Z clamp at
every two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
78 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe 35.00 Rmt 91.84
( SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of MS Z clamp at
every two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
79 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe 35.00 Rmt 72.65
( SCH- 40) for cold water including fittings as approved by Engineer In
Charge. Pipe shall be fixed on the wall with the help of MS Z clamp at
every two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
80 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 85.00 Rmt 831.22
(Type B) conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of MS Z
clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost of
81 Providing laying (to level or slopes) and jointing reinforced concrete Light 15.00 Rmt 665.48
duty non-pressure pipes I.S. class NP2 of the following internal diameter
with collars and butt ends prepared for collar joints including testing of
joints complete.(D) 300mm
82 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 20.00 Rmt 836.73
(Type B) conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of
Special type on Clamping system made out From Z Clamps with nut/bolt
wall Clips etc. of the size 110 mm diametre x 149 mm length x 145 mm
heigh at every 2000 mm center to center or shall be concealed in walls as
directed including necessary fittings such as bends, shoes etc. including
testing of pipes and joints and jointed with adhesive solvent cement
including cost of all materials.
83 Providing, laying and jointing in true line and level 75 mm dia. UPVC 35.00 Rmt 698.92
SWRType B pipe conforming to IS 13592-1992 with one end plain and
other end socketed with rubbering and fitting conforming to ISI 14735-
1999 of approved make for drainage system pipe line, pipe shall be jointed
with each other with rubber lubricant, pipe shall be fixed on wall using of
MS Z clamp at every 2000 mm c/c or shall be conceled in walss as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost of
84 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 75mm 3.00 No 15.66
85 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 2.00 No 28.79
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
86 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including 150.00 No 70.70
all type necessary fittings and accessories etc. completed as per directed
engineer in charge.
87 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 11.00 No 571.08
diameter with jali of the following nominal diameter of self cleansing
design with C.I scread down or hinged grating including the cost of cutting
and making good the walls.
88 Providing and fixing wash down water closet dual flushing system type 4.00 No 4189.48
(European type W C pan) with integral P and S trap including jointing the
trap with soil pipe in cement mortar 1:1 (1 cement five sand) including
providing and fixing plastic seat cover for wash down WC with CP brass
hinges and rubber buffers back plastic seat and including providing and
fixing PVC flushing tank with a pair of C I or MS bracket with complete
fitting such as lead valve siphon 15 mm dia brass ball valve with polythene
float CP brass handle unions and couplings for connection with inlet out let
and over flow pipes 40 mm dia porcelain enameled flush bend including
cutting holes in walls and making good the same connection the flush
bend with cistern and closet vitreous china.
89 Providing and fixing brass screw down stop tap.(A) 15mm dia. 5.00 No 205.83
90 Providing and fixing brass screw down stop tap.(C) 25mm dia. 3.00 No 220.82
91 Providing and fixing ball cock of approved. quality as directed.(A) Copper 2.00 No 189.84
Metal (ii) 50mm dia.
92 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 4.00 No 663.43
93 Providing and fixing washbasin with single hole for pillar tap with C.I. or 3.00 No 1506.45
M.S. brackets painted white including sutting holes and making good the
same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin
mm x v 400mm size. (i) In white colour.
94 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 5.00 No 67.91
95 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 5.00 No 78.75
96 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 3.00 No 833.73
glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
wooden pluge with C.P. brass screws and washers.
97 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 3.00 No 603.19
fixed to wooden plugs with C.P. brass scews (B) 600mm x 20mm size.
98 Providing and fixing screw down bib taps of following size.(A) Brass screw 3.00 No 186.83
down bib tap polished bright. (i) 15mm dia.
99 Providing and fixing pillar tap, capstan head, screw down high pressure 3.00 No 308.73
with screws, shanks and back nuts. (i) 15mm dia.
100 Providing and fixing in position 300 mm high, 150 mm wide English/Gujrati 50.00 No 404.00
letters made from 1.0 mm thick stainless steel sheet as directed by
Engineer in charge with all necessary tools & plants etc. complete.
101 Providing and fixing S.W. gully trap with C.I. grating brick masonry 4.00 No 1246.92
chamber and water tight C.I. cover with frame of 300mm x 300mm size
(inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm
size P or R type
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
102 Constructing brick masonry chamber for underground C.I. Inspection 2.00 No 3208.77
chamber and bends with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm intenal
dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-
coarse sand :4-graded stone aggregate 20mm size) foundation concrete
1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls and bed concrete etc.
complete (i) Inside dimensions 455mmx 610mm and 450mm deep for
single pipe line.
103 Constructing brick masonry chamber for underground C.I. Inspection 2.00 No 3916.78
chamber and bends with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm
intenal dimensions total weight of cover with frame to be not less than
38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with
1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)
foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar
1:3 finished smooth with a floating coat of neat cement on walls and bed
concrete etc. complete.(i) Inside dimensions 500mmx 700mm and 450mm
deep for single pipe line.
104 Extra over items for every additional depth of 0.1M. of part thereof 2.00 Each 242.39
beyond 450mm depth for Brick masonry chamber.(i) for 455mm x 610mm
105 Extra over items for every additional depth of 0.1M. of part thereof 2.00 Each 264.86
beyond 450mm depth for Brick masonry chamber.(i) for 500mm x 700mm
106 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 38.70 Rmt 23.68
1:1 including neat cement finishing watering etc. Complete
107 Providing and fixing MS Ladder of required pattern with MS flats(30x3mm) 100.00 Kg 108.07
or round or square bars (12mm) at required spacing & with round headed
bolts and nuts or screws or welding including primer coat of approved
quality and two coats of oil paintas as directed by engineer in charge
108 Constructing Sandwitch Platform of 18 mm thick Polished Black Granite 5.10 Sqmt 2865.37
at top and 25 mm thick Kota stone slab one side polished at bottom with
cementing Materials / adhsives including makeing necessary grooves in
walls with Vertical sandwich two Kotastone 25 mm support every 60 cm
centre to centre or as required including all labour material of approved
quality incl. full moulded round front edge granite strip of one side
polished and jointed with grey cement slurry including rubbing and
polishing etc. complete for all floors
109 Providing and fixing kitchen platform trolley having three drawers of SS (IS 2.40 Sqmt 16080.21
304) of required size like thali, katleri, perforated, partition, cupsosar type
in kitchen platform having drawer front side by using 19mm thick all proof
plywood of ISI quality all side laminated &T.W Beading etc. as directed.
The size of SS (IS 304) basket of size 4" to 18" for thali, dish, katleri,
perforated, partition, cupsosar type as directed including necessary S.S.
fittings, handles, nobs, telescopic channels, etc. as directed
110 Providing and fixing Kitchen sink including cutting holes in walls and 2.00 No 2575.56
making good the same but excluding fittings. (C) SS Sink Glosy ASIS
Grade x 1mm thick with over all size 610x460 mm & bowl size
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
111 Providing and fixing concealed center point to wall ceiling & floor CPVC 20.00 Rmt 166.86
(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for
potable water of following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc. complete.[A] 15 mm.
112 Providing and fixing concealed center point to wall ceiling & floor CPVC 35.00 Rmt 249.72
(SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for
potable water of following dia. nominal bore tube fittings and clamps
including making good the wall, ceiling and floor etc. complete. [C] 25 mm.
113 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 0.80 Sqmt 1209.98
(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan
Endura Tac Button Yellow Plus or equvqlent make in flooring laid on
mm thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface
and jointed with cement slurry including finished with flush pointing &
cleaning the surface for all floors as per detailed drawing etc. complete as
directed by Architect or Engineer in charge. Thse tiles shall be Anti Skid,
Chemical Resistant, Fade Proof, Frost - Heat & Weather Proof, High
Flexural Strength, Highly Durable, Stain Resistance . All Tactile Warning
Tiles meet the specific size and dimension standards as required by
114 Providing and Fixing a set of wall mounted 38 mm dia U shaped horizontal 1.00 Per Set 2671.45
stainless steel collapsible grab bar , 38mm vertical stainless steel fixed
grab rail of grade SS 304 from round pipe supported and 75 mm dia 8 mm
thick SS 304 base flange on wall including anchor fasteners, nuts,
accessories as per detailed drawing etc. complete as directed by Architect
or Engineer in charge.
115 Drilling in soil with lowering of pipes concrete sealing including gravel 110.00 Rmt 393.90
packing clay breaking and development of bore with air compressor by
required capacity vertical test etc. complete including the cost of
benimeter 250mm dia.
116 Supplying slotted PVC pipes of approved quality at site of work confirming 60.00 Rmt 555.50
to IS. 1239/1974 180mm dia.
117 Supplying PVC plain pipes of approved quality at site of work confirming 50.00 Rmt 494.90
to IS. 1239/1974 180mm dia.
118 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 100.00 Rmt 104.03
flexible Submersible copper cable approved make of following Size. (B)
Core x 2.5 Sq. mm.
119 Supplying submersible pump set suitable for bore of 150 mm. dia. or more 1.00 Nos 33557.25
having three phase motor capacity not more than 7.5 H.P. with following
capacity .. (B) ( 8 stage) 390 to 350 LPM discharge at 62 to 70 mtrs. head
respectively suitable for 50mm dia. delivery pipe Cat.III
120 Lowering of submersible motor pump set at the depth of following 1.00 Per Job 2568.43
,complete with required. Nos. and size of casing pipes erected by means of
proper chain pulley block & pipe wrenches after checking of threads of
each pipe with coupling to take the load of the pump set and pipe
assembly filled up with water (B)Above 60 mtrs. and Up to 120 mtrs.
121 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium 100.00 Rmt 513.08
grade) of the 50mm nominal bore, tube, fittings and clamps include.
Making good the wall ceiling and floor.(F) 50mm dia.
122 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 100.00 Rmt 602.70
(Medium grade) of the following nominal bore, tube fitting and clamps
including making good the wall ceiling and floor.(E) 40mm
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
123 Providing and fixing to wall, ceiling and floor galvanised Mild steel tubes 40.00 Rmt 397.87
(Medium grade) of the following nominal bore, tube fitting and clamps
including making good the wall ceiling and floor.(C) 25mm
124 Providing and fixing gun metal cock of non return full way wheel valve.(F) 1.00 Nos 858.50
125 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 110.00 Rmt 336.24
pressure poluthene pipes of the following outside Dia. Low densidy,
complete with special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and floor.(G)110 mm
126 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working 25.00 Rmt 721.14
pressure poluthene pipes of the following outside Dia. Low densidy,
complete with special falnge compression type fittings, wall clipsetc.
including making good the wall ceiling and floor.(G)160 mm
127 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m 1.00 No 6348.86
with excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete
including brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick
with 15mm thick cement plaster inside & outside & 1.06x1.06 RCC (1:2:4)
slab of thickness 0.15m with CRS steel and 0.60mx0.45m cast iron
manhole cover with frame weight not less than 35 kg as per directed by
Engineer-in-charge
128 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m 1.00 No 17735.60
x1.20m & excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4
bed concrete of 0.15m thick including brick work in c.m 1:6 for 23cm thick
wall including 15mm thick cement plaster inside & outside with cement
slurry & 10cm thick RCC 1:2:4 top cover with frame of minimum weight of
35 kg & filling filter material kapchi in layers (25-40mm & 10-20mm) & BT
metal 40mm & sand as per directed by Engineer-in-charge.
129 Design , Supply and installation of Safety Signage made of Zinc Sulphilde 500.00 Sq. 9.41
based glow in dark , Rigid sheet with High Luminous property enclosed in a inch
transperent weather proof UV stabilized plastic pasted on 3 mm thick clear
acrylic sheet such as EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING
FIRE, FLOOR MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM CALL
POINT, FIRE HOSE REEL, FIRE HYDRANT POINT etc.
130 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 6 5.00 No 1968.64
Kg. Capacity as per IS:15683 & IS :
131 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 5.00 No 5520.76
Capacity 4.5 Kg. (conforming to IS-15683).
132 Supply, Filling and Fixing of approved make ABC Moduler type automatic 1.00 No 3423.73
fire extinguisher. Capacity 5 Kg. (conforming to IS-15683).
133 Submitting the application to obtain Fire Plan Approval and After 1.00 No 25250.00
Completion of Work Obtain Final Fire NOC
134 Supply, Installation and commissioning of Fire Alarm Panel Conventional 1.00 No 21398.30
type, 4 zone, with complete accessories.
135 Supply, Installation and commissioning of smoke detectors / heat 3.00 No 1027.12
detectors, with complete accessories.
136 Supply, Installation and commissioning of plug in base for the smoke 3.00 No 256.78
detectors, hooters, with complete accessories.
137 Supply, Installation and commissioning of Audio hooters , with complete 3.00 No 1069.91
138 Supply, Installation and commissioning of Manual Call Points, with 3.00 No 1010.00
complete accessories.
139 Cable(Armour) for Fire Alarm system 140.00 Mtr 94.15
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
140 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final 150.00 Sq.mt 8.08
141 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 52.00 Pt. 485.81
(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi
strand copper wires up to 10 mtr length , in below type of pipe erected
with 6A Modular type switch / bell push & accessories and earth continuity
of following type, erected on PVC / Metallic/Wooden box, single mounting
base frame covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp
holder/ceiling rose / H.D.Connector as directed. (f) with medium class
Rigid PVC pipe and accessories erected concealed in wall/ceiling complete
142 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 12.00 Pt. 674.68
both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length, in below type of pipe erected with 6A
Modular type switch and hum free EME step type electronic fan regulator
mounted and accessories with earth continuity of following type erected
on PVC / Metallic/Wooden box, single mounting base frame covered with
textured/metallic/white front plate modules erected on / in wall / ceiling
as per pipe erected. with necessary ceiling rose / H.D.Connector as
directed. (f) with medium class Rigid PVC pipe and accessories erected
concealed in wall/ceiling complete Cat. III
143 Point wiring for on board Looped Plug with 6A Modular type switch & 5 13.00 Pt. 257.55
pin socket erected on PVC / Metallic/Wooden box, single mounting base
frame covered with textured / metallic/white front plate modules erected
on / in wall / ceiling with following type accessories Cat. III
144 Providing following type of Modular Type Accessories mounted with PVC / 3.00 Ea. 151.50
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge. (1)One No. SP 6 Amp.
145 Providing following type of Modular Type Accessories mounted with PVC / 3.00 Ea. 151.50
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(2) One No 5 pin plug
146 Providing following type of Modular Type Accessories mounted with PVC / 20.00 Ea. 25.25
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(7) Blank Plate Single
147 Providing following type of Modular Type Accessories mounted with PVC / 8.00 Ea. 160.59
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(8) Computer RJ-45
148 Providing following type of Modular Type Accessories mounted with PVC / 13.00 Ea. 180.79
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(9) 16 Amp. SP one way
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
149 Providing following type of Modular Type Accessories mounted with PVC / 16.00 Ea. 199.98
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(10) 6/16Amp.
Universal socket Cat.III
150 Providing following type of Modular Type Accessories mounted with PVC / 3.00 Ea. 410.06
metallic/Wooden box, single mounting base frame covered with textured
/ metallic/white front plate , modules erected with necessary connections
as per site situation directed by Engineer In charge.(14) 16A Double Pole
Modular MCB Switch Cat.III
151 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 405.00 Mtr. 24.24
size complete to be erected on/in wall or ceiling erected with necessary
PVC fittings & Junction boxes fixed with adhesive solution & Clamps with
following dia of pipes, in approved manner as directed (a)20 mm
152 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 578.00 Mtr. 82.82
marked stranded Copper conductor wire in following type of pipe to be
erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size (A) With medium class Rigid PVC pipe and
accessories (b) 2 wire 2.5 sq. mm
153 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 67.00 Mtr. 112.11
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following
size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq.
154 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 88.00 Mtr. 260.58
marked stranded Copper conductor wire in following type of pipe to be
erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC
insulated stranded wire of green colour for earth continuity of following
size (A) with medium class Rigid PVC pipe and accessories(h) 4 wire 6 sq.
155 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 36.00 Mtr. 46.46
kv grade ISI marked copper wires of following size to be erected as
directed. (e) 1.50 Sq.mm 3 core round PVC sheathed
156 Supplying & erecting approved make LAN cable of following size in existing 240.00 Mtr 76.76
pipe as per direction [D] CAT - 6 e
157 Providing & erecting Switch board for Computer or electric apparatus 8.00 Ea. 1133.22
consisting of following modular type accessories mounted with PVC /
Metallic concealed/open box with single mounting base frame covered
with textured/metallic /white front plate,modules erected with necessary
connections as directed
1 no. 6A/16A universal plug-switch combined.
3 nos. 6A Switch
3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III
158 Decorative call bell Ting-tong box type 250 volts complete erected 2.00 Ea. 71.71
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
159 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 36.00 Ea. 535.30
to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium
die cast powder coated and high U.V. & corrosion resistance with diffuser
with company mark/name 160V to 270V, Power Factor more than 0.95,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description
have shown ranges of Wattage capacity of LED fittings.The Engineer
incharge may select any wattage capacity between the ranges shown.) (A)
Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV, IP-20,
conventional 4 feet Cat-lll
160 Supplying and erecting led lamps with following wattage capacity of 220 to 7.00 Ea. 112.11
240 voltage, minimum 15000 burning hours life, 500 V in built-surge
protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22
lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser
suitable LAMP holder (ii) 5 to 8 watts Cat-III
161 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt 4.00 Ea. 758.51
to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink
shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium
pressure die cast powder coated and high U.V. & corrosion resistance
with diffuser housed in aluminium casted body with company mark/name
160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to
Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting
required LM-79 & LM-80 Certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer incharge
may select any wattage capacity between the ranges shown.) (A) Square/
Circular shaped Surface/Recessed Mount Downlight with provision for
spring loaded mounting clips complete.IP20 (iv) 22-24 watts, Surge-2 KV
162 Supplying & erecting approved make low noise decorative exhaust fan 3.00 Ea. 1703.87
having square frame ABS body with inbuilt lowers & square frame. 200mm
with 1350RPM Cat.II
163 Supplying and erecting LED street light / Flood light fittings with High 6.00 Ea. 4997.48
power White LEDs wattage of 3 Watt and above assembled on single
MCPCB, efficiency more than 130 lm/w and corrosion free High pressure
die cast aluminum housing with smooth finish powder coated and heat
sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed
160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED
driver efficiency > 85 %.( fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown ranges of Wattage
capacity of LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.) (A) Street Light (IP-65), Surge
protection -4KV integral and ,Light must have 440VAC line supply with
over-voltage protection. (ii) above 48 to 60 Watts Cat-lll
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
164 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan 12.00 Ea. 1948.29
with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz
1200 mm sweep complete having 3blades with aluminium blades with
canopy & 30 cm. down rod erected with earthing.(Make shall be approved
by Engineer in charge))
165 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 12.00 Mtr. 108.07
down rod erected duly painted for fan complete with proper insulation
without leakage and earthing.
166 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 12.00 Ea. 108.07
the RCC bars up to 50mm length each side and pierced through a
Gauge M.S. box / Heavy Duty PVC box complete erected concealed in
Ceiling with necessary finishing.
167 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or 12.00 Ea. 18.18
168 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 180.00 Mtr. 126.25
/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary
clamps or in existing trench / pipe of following size of cables (B) 4 core
169 Providing and, fixing heavy duty flange type brass cable gland with rubber 2.00 Ea. 38.38
ring for PVC insulated armoured cable complete with out going tails,
insulating tape etc for following size of cables. (B) 2 to 4 core 6 Sq. mm
170 Solder less crimping type Aluminium lugs conforming to IS suitable for 40.00 Ea. 6.06
cable of following size evenly crimped with high pressure tool & connected
to switchgear terminals with brass/cadmium plated nut bolts in an
approved manner. (A) 6 Sq.mm
171 providing and erecting Miniature circuit breaker single pole 6A to 25A 30.00 Ea. 112.11
suitable to operate on 240 V A.C. system and having breaking capacity
KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark
172 providing and erecting Approved make RCCBs conforming to IS: 12640 and 6.00 Ea. 2235.13
having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA
and suitable for operation on single phase 240 V,50Hz. having
characteristic of quick action & tripping with all advance feature & do not
incorporate any electronic component. for following Max. rating erected
as directed (ii) 40Amps. DP Cat. III
173 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B 5.00 Ea. 638.32
curve) having 10KA breaking capacity & confirms to IS :8828 in existing box
having following capacity (b)40 Amp. Cat.III
174 Providing and erecting Sheet Steel powder coated MCB distribution board - 2.00 Ea. 2339.16
flush / surface mounted fitted with busbar, neutral link, earth bar and DIN
rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house
appropriate nos. of MCBs.(The DBs should be used of same company of
MCB to be used) suitable for (B) three phase incoming and single phase
horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel
double door (i)4 way
175 Providing and erecting HOT deep Galvanised iron strip wire 8 to 16 SWG. 5.00 Kg. 77.77
176 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 1.00 Ea. 368.65
cms. dia. galvanised iron pipe with coupling and buch buried in specially
prepared earth pit complete with necessary 8 SWG earth wire.
177 For using salt and charcoal / coke as required for pipe type earthing. 1.00 Ea. 171.70
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
178 Supplying & erecting earth pit of minimum bore dia.150mm size approved 1.00 Ea. 4591.46
make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-
1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia
of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm
having 200-250 Micron galvanising, connection terminal dia of 12mm with
constant ohmic value surrounded by highly conductive compound with
high charge dissipation suitable for following type of applications with
chamber and heavy duty cover. (A)(approved make OEM has to submit
test certificate including value of earth resistance of installation duly
stamped and signed by agency and officer Incharge has to ensure the
value of earthing resistane mentioned in test Certificate) & having back
filling compound of (B) Inner chemical (CCM Compound)- Resistivity:-
ohm / meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no
load & dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing
compound should be capable to retain moisture for long time Necessary
test report must be submitted by Agency. (a) For Electrical Installation up
to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
179 Supplying and erecting B class galvanised iron pipe 32 mm outside dia 45 6.00 Ea 343.40
cm long duly welded on 20 cm x 20 cm x 3 mm thick M.S. base plate,
erected on wall or corner for mounting street light luminaire with
necessary hardware materials duly painted.
Rupees Fifty Two Lacs Fifty Five Thousand Five Hundred Twelve and Paise Forty Six only
I/We am/are willing to carry out the work at………% above/below percent(Should be written in figures and words) of
the estimated rate mentioned above. Amount of my /our tender works out as under.
put to tender 5255512.46 put to tender
Deduct :………% below Add :………% Above
In words : In words :
1 The Contractor shall exhibit a board with detailed specification and details of work as directed by
the Engineer-In-Charge for which no extra payment shall be made.
2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.
3 GST and Income tax TDS will be deducted at a source while making payments of bills
4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.
G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in
R.C.C. items where there is a change as per actual mix design the cost of difference of cement
consumption have been deducted from the rate of original item at the rate of input rate
Item Item of work Quantities Estimated Total
No. estimated but may Rates Amount
be more or less In figure according to
Rs. Ps. estimated
1 consumption have been deducted
2 from the rate of original item at the
3 rate of input 4 rate
mentioned in all the tender.
5 GST will be paid extra as per Govt. amendment.
Signature of Bidder Deputy Executive Engineer
Valsad (R&B) Sub-Division
Executive Engineer, Executive Engineer
Electrical R & B Division Valsad (R&B) Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ.pdf
specification.pdf
special condition electrical.pdf
Electric sub contract.pdf
electric MOU.pdf
SBD.pdf
NIT.pdf
9 GR list New.pdf
11 Building-Specification Booklet (2 side).pdf
Download all tender documents and submit your bid