Bid Documents of Construction of Footpath at Shahera Darvaja Paase AU Small Bank to Community Hall sudhi Road Lunawada Nagarpalika Mahisagar

Name of work : Construction of Footpath at Shahera Darvaja Paase AU Small Bank to Community Hall sudhi Road

Lunawada Nagarpalika Mahisagar

Quantity Rate Per Amount

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(B) Dense or Hard soil

Providing and laying cement concrete 1:4:8 (1-Cement : 4- coarse

sand : 8- hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35 mm Sand layer for

levelling and filling the joint with sand in proper line and level as

per guidlines of IRC : SP 63-2018 etc. Complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

4 cement mortar 1:1 including neat cement finishing, watering etc.

Providing and Fixing of Pre Cast PCC Kerb Stone (M-25) for

Divider/Foothpath in Line and Level including Filling the joints

5 with (1:3) Cement Mortar and Finishing it with neat Cement Slurry

(as per instructure of Engineer in charge with necessary curing etc

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

6 plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) Extra for

brick work in superstructure above plinth level upto floor two level

(B) Conventional

20 mm. thick sand faced cement plaster on wall upto height

meters above ground level consisting of 12mm thick backing coat

of c.m. 1 : 3 (1 cement : 3 sand) and 8 mm thick finishing coat of

c.m. 1 : 1 (1 cement : 1 sand) etc. complete

Providing and fixing mirror polished 18mm thick Granite with full

round edge and polished of approved quality in clading on sill and

around the doors/ windows/ ventilation with 20 mm thick cement

plaster CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in

charge etc. complete.

Providing and laying hot applied thermoplastic compound 2.5 mm

thick including reflectorising glass beads at 250 grams / Sq.mt.

9 area. Thickness of 2.5 mm is exclusive of surface applied. Glass

beads as per I.R.C. 35. The finished surface to be level uniform and

free from streaks and holes.

LUNAWADA NAGARPALIKA - LUNAWADA

Name of Tender : Bid Documents of Construction of Footpath at Shahera Darvaja Paase AU Small Bank to Community

Hall sudhi Road Lunawada Nagarpalika Mahisagar

SCHEDULE - "B1"

Name of work : Construction of Footpath at Shahera Darvaja Paase AU Small Bank to Community Hall sudhi Road

Lunawada Nagarpalika Mahisagar

Quantity Rate Per Amount

Supply and fixing cats eye (Simsonite) made out of Acrilo beautile

sterine injuction high compressed molding with reflector made of

10 MMC (prismatic type) size 12 cms x 6 cms x 2.5 cms, provided with

bituminous adhesive 100 g. with each unit for fixing (Engineer

Solar Stud: Supplying of Solar Raised Pavement Markers made of

polycarbonate molded body with circular shape, solar powered,

LED self illumination in active mode, 360 degree illumination and

reflective panels with micro prismatic lens capable of providing

total internal reflection of the light entering the lens face in passive

mode. The marker shall support a load of 20000 kg tested in

accordance to ASTM D 4280. The marker should be resistant to

dust and water ingress according to IP 65 standards and should

withstand temperatures in the range of 0 C to 70 C. Color of lighting

could be provided in red or yellow (amber) as per requirement and

11 typical frequency of blinking is 1 Hz. There should be current

losses of less than 20 micro-amperes at 2.4 V in sleep-charging

mode to enhance the life of the marker and a full charge should

provide for a minimum autonomy of 50 hours. The height, width

and length of the marker shall not be less than 10 mm x 100 mm x

100 mm. Also, the surface diameter of the marker shall not be less

than 100 mm respectively. The weight of the marker shall not

exceed 0.5 Kilograms. Fixing will be by drilling holes on the road

for the shanks to go inside, without nails and using epoxy resin

based adhesive as per manufacturers recommendation and

complete as directed by the engineer

Providing Supplying and Fixing of Concrete Bollard at Crossing and

12 Various lcoation for Saftey Precotations as directed by Engineer in

Earthwork for embankment including breaking clods, dressing

with all lead and lift and including watering rolling and

consolidation of subgrade in layers at O.M.C. to required dry

density including filling the depression which occur during the

process using power roller 8T to 10T.(E) From Borrow area within

3.0KM. leadn soil

Supplying and fixing reinforced concrete heavy duty non-pressure

pipes with collars for culverts carrying heavy traffic as per IS 458-

14 1991 specifications including setting the pipes in C.M. 1:2 watering

and laying (to level or slopes) of class NP3 of following internal

daimeters.(i) 300mm dia.

Constructing Brick masonry road gully chamber 500mm x 450mm

15 x 600mm including 500mm x 450mm C.I. horizontal grating wih

Add 18% GST Charge Rs.

Add 3% Consultacy Charge Rs.

Add 1% QC Charge Rs.