Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | ₹3.2 L | L1 | Accepted-AOC L1 |
| 2 | L2₹3.3 L+₹11,829.20 (3.74%)Rejected-AOC | ₹3.3 L+₹11,829.20 (3.74%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | JOJO MATHEW L1 | ABHILASH.M.K. L2 |
|---|---|---|---|---|---|
| 1.00SubCenter Maintenance | |||||
| 1.00 | OD505557/2025-2026: Providing & fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as
approved by engineer in charge) 0.40 mm(+0.05%) thickness. Sheet should have protective guard film of
25microns minimum to avoid scratches during transportation and should be supplied in a single length of 12
M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of
size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but
excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.
(MOD 12.50 of DSR) | 93.8 | 1 sqm | 503.49 ₹47,224.84 Lowest | 522.34 ₹48,992.88 |
| 1.00 | OD506845/2025-2026:Providing and fixing Alu zinc sheet 0.40 mm thick using self drilling / self tapping screws complete Ridges plain (500-600 mm) | 25.1 | metre | 366.74 ₹9,205.17 Lowest | 380.46 ₹9,549.55 |
| 1.00 | OD505555/2025-2026:Providing and fixing 150mm half cut PVC Pipe over flat iron brackets 20x5mm | 36.3 | metre | 195.72 ₹7,104.64 Lowest | 203.05 ₹7,370.72 |
| 1.00 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | 12.8 | metre | 275.76 ₹3,529.73 Lowest | 286.08 ₹3,661.82 |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 221.95 | kg | 201.53 ₹44,730.19 Lowest | 209.07 ₹46,403.71 |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 299.71 | kg | 163.23 ₹48,921.99 Lowest | 169.34 ₹50,753.23 |
| 1.01 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.96 | cum | 313.92 ₹301.36 Lowest | 325.67 ₹312.64 |
| 1.01 | 50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. | 4.47 | cum | 388.96 ₹1,739.82 Lowest | 403.52 ₹1,804.94 |
| 1.01 | OD505579/2025-2026::Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for Foundation ,Basement including all cost of materials, labour charges etc.(MOD 50.6.7.2 of DAR) | 4.33 | cum | 6,073.78 ₹26,281.25 Lowest | 6,301.14 ₹27,265.03 |
Tender Value
₹3.4 L
EMD Value
₹8,457
Closing Date
16 Mar 2026, 10:00 amClosed
Assistant Engineer
Alakode Grama Panchayath
Alakodu GP PRO No 234 - 2025-26 Maintenance to Neduvodu Veterinary Subcenter-Parappa ICDP
2026_LSGD_844268_11
9-E-TEN/ALKD/2025-2026
Open Tender
Civil Works - Buildings
Item Rate
180 days
Alakode
Please refer Tender documents.
10 documents required · 10 mandatory
₹750
Yes
₹8,457
Yes
7 Jul 2026
6 Mar 2026
18 Mar 2026
6 Mar 2026
16 Mar 2026
6 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1SubCenter Maintenance | |||||
| 1.001 | OD505557/2025-2026: Providing & fixing Alu Zinc profile sheets (size, shape and pitch of corrugation as
approved by engineer in charge) 0.40 mm(+0.05%) thickness. Sheet should have protective guard film of
25microns minimum to avoid scratches during transportation and should be supplied in a single length of 12
M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling / self tapping screw of
size (5.5x55 mm) with EPDM seal complete upto any pitch in horizontal/ vertical/ curved surface, but
excluding the cost of purlins, rafters, trusses, and including cutting to size shapes where ever required.
(MOD 12.50 of DSR) | - | 1 sqm | - | - |
| 1.002 | OD506845/2025-2026:Providing and fixing Alu zinc sheet 0.40 mm thick using self drilling / self tapping screws complete Ridges plain (500-600 mm) | - | metre | - | - |
| 1.003 | OD505555/2025-2026:Providing and fixing 150mm half cut PVC Pipe over flat iron brackets 20x5mm | 1 | metre | - | - |
| 1.004 | 50.18.9.18.1:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall | - | metre | - | - |
| 1.005 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.2 | kg | - | - |
| 1.006 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.8 | kg | - | - |
| 1.007 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.008 | 50.2.26.1:Filling with contractor own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge. | 1 | cum | - | - |
| 1.009 | OD505579/2025-2026::Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for Foundation ,Basement including all cost of materials, labour charges etc.(MOD 50.6.7.2 of DAR) | 1 | cum | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1426214.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.22 MB
NIT.pdf
Tender Documents • 0.04 MB
SBD.pdf
Tender Documents • 1.65 MB
BOQ_1426214.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .