Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.1 LAccepted-AOC | L1 | Accepted-AOC Being reasonable | |
| 2 | L2₹24.8 L+₹1.7 L (7.38%)Rejected-Finance 3 A KUSUMANJALI PRIYADARSHINI NAGAR BAREILLY UP 243001 | BAREILLY | BAREILLY | UTTAR PRADESH | 243001 | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹27.4 L+₹4.3 L (18.6%)Rejected-Finance H NO 786 ANAND VIHAR COLONY PILIBHIT BYPASS BAREILLY UP PIN 243005 | BAREILLY | UTTAR PRADESH | 243005 | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹28.2 L+₹5.1 L (21.9%)Rejected-Finance 001 00 BANK COLONY SHIVPURI SHIVPURI MADHYA PRADESH 473551 | SHIVPURI | MADHYA PRADESH | 473551 | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹29.0 L+₹5.9 L (25.6%)Rejected-Finance 37 B MODEL TOWN NEAR HARI MANDIR BAREILLY UP 243001 | BAREILLY | UTTAR PRADESH | 243001 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
20 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Surya Shreedhar, GE (AF) Bareilly
Garrison Engineer (AF) Military Engineer Services, Bareilly 243002 (UP)
8704 SPECIAL REPAIRS TO BLDG No. P-36 AND P-37 (CIVILIAN MD ACCN) IN TV AREA AT AF STATION, BAREILLY
2023_MES_576845_1
8704/E8
Open Tender
Civil Works
Item Rate
180 days
Bareilly
Class D
Category a i
7 documents required · 7 mandatory
₹500
Garrison Engineer (AF) Bareilly
₹88,000
Yes
1 Mar 2023
24 Jan 2023
22 Feb 2023
24 Jan 2023
20 Feb 2023
7 Feb 2023
Amount
Removal to existing treatment from roof including brick tiles laid dry etc any thickness or description complete all as specified.
Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in leveling course on roof complete including necessary formwork all as specified.
M&L for providing water proofing treatment over leveling coarse on approachable roof with following Specifications : 1. Average 10mm thick plaster in CM 1:3 mixed with polymer based water proofing compound when leveling coarse is still green. 2. After the surface is fully dried, apply a coat of bituminous primer @ 0.30 liters/Sq.m. 3. After primer, the entire roof surface shall be applied with hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sq.m 4. Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film and standard weight 3 Kg/Sq.m shall be laid with 100mm side lap/end lap on prepared surfaces as per manufacture’s instruction. 5. Laying brick tiles laid over a bedding layer of 20mm screed in CM 1:4 mixed with polymer based liquid water proof additive @ 5% by weight of cement or as per manufacturer’s instructions and tiles joints shall be filled with polymer based cement proof joint filler of approved make complete all as specified and directed.
M&L for water proofing treatment to vertical surfaces of parapets and the like with following Specifications : 1. After the surface is fully dried, apply a coat of bituminous primer @ 0.30 liters/Sq.m. 2. After primer, the entire roof surface shall be applied with hot, blown bitumen grade 85/25 confirming to IS-702 @ 1.2 Kg/Sq.m 3. Over hot bitumen, polymeric water proofing membrane consisting of 90 to 100 micron thick central core of HMHDPE film and standard weight 3 Kg/Sq.m shall be laid with 100mm side lap/end lap on prepared surfaces as per manufacture’s instruction.
M&L for cutting out crack in V section in existing roof, chajjas or similar work up to 40mm deep and cleaning the same with water jet to get rid of any loose material and wetting, grouting with cement & sand mortar 1:3 mixed with liquid WPC all as directed.
M&L for providing cement concrete type B1, 1:2:4 using 20mm graded aggregate as in lintels up to 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc complete including necessary formwork all as specified.
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.
M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.
Taking up or down galvanized steel tubing 15mm bore with fittings.
Taking up or down galvanized steel tubing 20mm bore with fittings.
Supplying and laying of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified
S&F Brass elbow for CPVC pipe 20mm outer dia
S&F Brass elbow (¾" x ½") for CPVC pipe
S&F Brass Tee for CPVC pipe 20mm outer dia
S&F Male Brass threaded adaptor for CPVC pipe 20mm outer dia
S&F Female Brass threaded adaptor for CPVC pipe 20mm outer dia
S&F GI tubes 20mm bore dia medium grade galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Refixing old GI tubing 20mm bore dia and connecting in new or old location including cleaning etc. complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks, double layered of capacity 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position complete including necessary GI tank nipples, taking down existing unserviceable tank all as specified and as directed by Engineer-in-charge.
S&F in repairs Ball valves 20mm bore dia, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed [Minimum weight: 210gms] all as specified including taking down existing unserviceable valve.
S&F in repairs PVC (SWR) pipe 110mm bore, single socketed in any length with rubber ring joints fixed to walls complete all as directed.
S&F PVC (SWR) bends 110mm bore, any radius complete all as directed.
S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with dia of outlet 75mm complete all as specified.
S&F Cast iron soil, waste and vent pipes 75mm bore, sand cast in any length with or without ears, with cement joints, laid in trenches or in floors all as specified.
S&F Cast iron soil, waste and vent pipes 100mm bore, sand cast in any length with or without ears, with cement joints, fixed to walls all as specified.
S&F of 100mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.
S&F of 75mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) complete all as specified and directed.
S&F cast iron cowl 75mm
S&F 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed.
S&F Stack clamps for 75mm bore pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.
S&F Stack clamps for 100mm bore pipe out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified.
Dismantling of cast iron or reinforced concrete drain pipes 75/ 100mm dia, jointed in cement mortar and taking out of trenches, if required
S&F in repairs vitreous China squatting pan, Orissa pattern, size 580x440mm, white with integral foot rests, 'P' or 'S' trap including provision of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match complete all as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) all as specified and as directed.
M&L for 75mm thick cement concrete type C1, 1:3:6 (using 40mm graded stone aggregate) in plinth protection, laid in bay n.exc. 3.00 sq.m each, finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight) complete all as specified and directed.
S&F in repair vitreous china white flat back wash hand basin 550 x 400mm size including CP waste coupling, 32mm dia PVC waste pipe, CI/MS brackets including cutting for and pinning in brackets or fixed with brass screws all as directed.
S&F in repairs PVC valve less, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle, brackets complete including PVC connection and outlet pipe all as directed.
S&F in repairs Stop valves, 15mm bore, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and as directed
S&F PVC connection 15mm size 450mm long with PTMT nuts on both sides.
S&F in repairs wall mixer cast copper alloy, chromium plated for kitchen sink with swan neck bends, fancy type 15mm bore complete all as directed.
S&F in repairs basin mixer cast copper alloy, chromium plated with central hole for WHB, fancy type 15mm bore complete all as directed.
S&F in repairs cast copper alloy, chromium plated hot and cold 15mm dia wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe, connecting legs & wall flange complete all as directed [excluding hand & overhead shower].
S&F in repairs Bib taps, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.
S&F corner shelf, fancy type three tier with 5.50mm thick glass mounted on CP brass frame fixed with brass screw & plug, size not less than 450mm complete all as specified.
S&F in repairs brass chromium plated grating doom 100 mm dia complete all as directed.
S&F in repairs brass chromium plated shower rose 125mm dia with swivel joint suitable for fixing to 15mm bore tube all as specified and as directed.
S&F in repairs brass chromium plated Towel rail 'D' type, 600mm long complete all as specified and directed.
S&F in repair brass chromium plated Soap dish complete all as directed.
S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel heads Class-II, screwed both ends for iron pipe all as specified.
Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc. to receive plaster
M&L for rendering 15mm thick in CM (1:4) on brick or concrete surfaces finishing even and smooth without using extra cement complete including mixing water proofing compound all as specified. [Note: Supply only water proofing compound shall be measured and paid separately]
M&L for rendering 15mm thick in CM (1:6) on brick or concrete surfaces, finishing even and smooth without using extra cement complete all as specified.
Supply only liquid water proofing compound.
M&L for rendering 10mm thick in CM 1:3 on surfaces of ceiling finished even and smooth without using extra cement complete including brushing neat cement slurry with 3 kg of cement per sq.m. preparatory to rendering complete all as specified and as directed.
M&L for preparation of new plastered surfaces of walls & applying two coats of cement based paint all as specified and as directed.
M&L for preparation of new plastered surfaces of walls & applying two coats of distemper oil emulsion over a coat of alkali resistant primer all as specified and as directed.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) n. exc. 1.5sq.m. each all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from frames) exc. 1.5sq.m. but n. exc. 4sq.m. each all as specified.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing shown on Sl. Page No. 180 of SSR Part-II-2020.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing shown on Sl. Page No. 176 of SSR Part-II-2020.
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 65 x 125 mm, double rebated comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
All as per Item No. 66 herein before but single rebated of size 50x100
M&L for Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: Butt hinges and necessary screws shall be paid separately)
S&F Factory made PVC solid panel wire gauzed shutter 35 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling with wire gauze duly wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly as per specification & drawing shown on Sl. Page No. 179 of SSR Part-II-2020.
S&F 300mm long Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S&F 250mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.
S&F 100mm long cold rolled MS butt hinges medium weight.
S&F extruded aluminium handle 125mm long fabricated type anodized all as specified.
S&F extruded aluminium handle 150mm long fabricated type anodized all as specified.
S&F 150mm long aluminium anodized barrel tower bolts of extruded section.
S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate complete
S&F mild steel (base Steel as per IS 513 D Quality) Prefabricated, Pre-coated windows and ventilators of size exc. 1 Sq.m & n. exc 3 Sq.m, consisting both the glazed and wire glazed shutter, grill and fittings with following specifications and all as specified and directed:- (a) Frame shall be of 0.60mm thick powder coated rolled section of size 72mm x 55mm and mullion shall be 75mm x 49mm fitted with nylon self expanding caps and driving MS electroplated 80mm long screw. (b) frame of glazed shutter shall be 47mm x 22mm and glass bead shall be 12mm x 12mm fitted with nylon/ polypropylene corner brackets and mullion clips all per manufacturer's instructions. (c) frame of wire gauzed shutter shall be 40mm x 20mm and glass bead shall be 12mm x 12mm fitted with nylon/ polypropylene corner brackets and mullion clips all per manufacturer's instructions. (d) MS grill shall be powder coated made with 10mm Square bar @ 110mm c/c welded to MS flat 12mm x 6mm fitted with machine screw to window frame. (e) Rubber gasket EPDM shall be used for all glass and gauzed shutter. (f) 2 SS hinges, 1 powder coated handle, tower bolt 75mm- 2 Nos with 1 powder coated stay for wire mesh shutter shall be provided with each shutter.
All as per item No 77 Above but size of window/ventilator n.exc. 1 Sq.m complete all as specified and directed.
M&L 140mm length of Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F 100mm long Butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed, type C-21 all as specified.
S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ glazing clips/ wooden beads in any size all as specified and as directed.
S&F 3mm thick figured glass, pin headed type and glazing with oil putty/ glazing clips in any size all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L for 25mm thick cement concrete PCC 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified
M&L for glazed digitally printed ceramic tiles of size 300x450mm, 6 to 7mm thick in vertical surfaces of wall, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.
M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.
M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.18sq.m but n.exc. 0.36sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.
S&F in repairs fancy type PVC coated mild steel powder coated 25mm dia medium grade curtain rods including suitable brackets, globes and rings @ 10 Nos per metre complete all as specified and as directed by Engineer-in-Charge.
Drilling holes in cooking platform stone slab for gas pipe etc n. exc 25mm dia complete all as specified and as directed.
S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.
M&L for reinforced cement concrete 1:1½:3 type A1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete all as specified.
Use and removal of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surface of concrete all as specified
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.
S&F in repairs stainless steel kitchen plate rack of size 36"x31"x10", made of 1mm thick stainless steel sheet complete all as directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar all as specified.
M&L for 18-20mm thick Udaipur green stone work (table rubbed and polished) in floors, steps, jambs, pillars, window cills, cooking platforms and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of stone, laid over and including 20mm thick screed bed in CM 1:4 complete including rounding and polishing the edges all as specified and as directed.
Taking down carefully aluminium/ copper point wiring for light, fan, socket or power point etc. complete with all fittings and fixtures such as switch piano, ceiling rose, switch socket, pendants etc including making good surface of wall, ceiling etc complete all as specified.
Taking down carefully existing sub-main wiring of any description complete all as specified.
Taking down distribution board of any type including cutout, MCBs etc. complete all as specified and as directed.
M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
All as per Item No. 103 herein before but for one 3 pin 6 Amp socket out let point on independent board.
All as per Item No. 103 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.
All as per item No. 103 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.
S&F wall/ surface mounted type LED light fitting 1 X 20 watt (4' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. [Cat. Part No. BN021C LED22S PSU CW GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS20WLED865SPCWH of make: Havells/ Cat No. CCS-100-20-65-HL2-DP-NWH of make: CG/ Cat No. LL20-221-XXX-65NE3 of make: Wipro]
S&F wall/ surface mounted type LED light fitting 1 X 9 to 12 watt (2' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed including taking down existing unserviceable light fitting. [Cat. Part No. BN 021 LED12S 6500 PSU GR (SmartBright) of make: Philips or Cat No. ENDURALINEARNEOBS10WLED865SPCWH of make: Havells/ Cat No. LL20-111-XXX-65NE3 of make: Wipro]
S&F LED bulk head light fitting 10W with IP-65 protection complete including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting and taking down existing unserviceable luminaire all as directed by Engineer-in-Charge. [Cat No. 'LBHP-10-CDL' of make: CG/ 'BIBWP 10W LED' of make: Bajaj]
S&F Ceiling fan complete with blades, white colour, with down rod, including all accessories, 230 V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) complete including taking down old un serviceable fan and handing over to AGE E/M Store all as specified and as directed. [Make :- Usha Model No: Usha Energia 32 1200mm, Havells Model No: Havells Efficiencia Neo 1200mm, Orient Model No: Orient Electric I Tome Plus 1200mm]
S&F Exhaust fan 300mm sweep, single phase 230V, AC metal body with louvers including electric connection from ceiling rose to fan connector with PVC insulated 3 core copper cable of size 0.75 sq.mm complete including taking down existing exhaust fan and handing over to AGE E/M Store all as directed. [Make: Model No. 'Ventil Air - DB' of make: Havells or equivalent in Almonard/ Bajaj/ Crompton]
M&L for Angle Holder, insulated body with back plate with & including LED Lamp 12 Watt suitable for batten fittings complete all as specified and directed by Engr-in-Charge.
S&F in repairs single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts complete all as directed.
M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 4 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
M&L for sub main wiring concealed complete with two runs of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade drawn through and including 25mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/ roofs/ floors etc. with one run of 1100 Volts grade 6 sq.mm (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade as earth continuity conductor all as specified. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]
S&F switch piano, flush type SP, one way 5/6 Amps, 230V AC
S&F switch piano, flush type, SP, one way, 15/ 16 Amps, 250 V, ISI marked.
S&F socket outlet 6 Amp, 2 in 1, 5 pin, 230V AC
S&F socket outlet 6/16 Amp, 2 in 1, 6 pin, 230 V AC
S&F electronic bell ding dong type working on 230 Volts AC supply complete all as specified. [Make: Anchor/ Standard/ Kinjal]
S&F bell push piano, flush type 5/6 Amps, one way, 230V AC
S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.
S&F electronic fan speed regulator, suitable for single phase AC 240 volts, 50 Hz, 100 watts complete all as specified and as directed by Engineer-in-Charge.
S&F sheet steel powder coated distribution board SPN 8 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F sheet steel powder coated distribution board TPN 4 ways, 415 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.
S&F MCB TPN, 415 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.
S&F MCB DP, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.
S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.
Disconnecting and taking down existing electronic energy meter of any capacity, keeping in safe custody during the repairs to building and refixing the same after the repairs complete all as directed.
Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.
Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.
Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.
Supply and spread river sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]
M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, complete all as specified and directed.
Making horizontal bore hole under the road suitable for drawing up to 50mm bore pipe at a depth not less than 1 Mtr below ground level for passing of LT underground cable complete all as specified and as directed.
Supply and laying GI pipe of 50mm bore dia light grade for cable protection, laid in trenches for drawing cables complete all as specified and as directed.
Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 4 Core 16 Sq.mm complete including taking up existing unserviceable cable all as specified and directed. Note: (i) Contractor shall bring the entire cable in one length. (ii) Necessary test results like continuity test, megger tests shall be submitted to Engineer-in-Charge before the cable is laid. (iii) Excavation & earth work will be measured and paid separately.
S&F LED Street Light Fittings having Ingress Protection class minimum IP-65 , suitable for road lighting luminaire with high power LED and maintenance free system for capacity 35 W complete with and including 32 mm bore light grade GI pipe bracket (1.5m long) duly bent to shape including 2 Nos MS flat iron (25mmx5mm) clamps, nuts, bolts, washers etc. complete all as specified and as directed including taking down existing unserviceable light fitting. [Make: Philips Cat Part No : BRP030 LED35 CW MR PSU GR DX/ Havells Cat Part No: ENDURACITYLITE PLATPLUS SL35W LED 757SASYBOPC/ Wipro Cat Part No : LR02-391-XXX-57-XX]
VINOD TRADING CORPORATION
ZAIGHAM ENTERPRISES
S.K.Enterprises
MOHINDER SINGH AND SONS
M/s M Aali construction co
M/s Shrangi Rishi Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .