Loading
Loading…
Loading…
Tender Value
₹1.1 Cr
EMD Value
₹2.2 L
Closing Date
16 Jun 2026, 3:30 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WEST
14 conditions · 2 needing a document upload
Financial Eligibility Criteria as per Clause 10.2 of Part-I of IRSGCC-2022 and ACS No.1 dt 14.07.22: The tenderer must have minimum average annual contractual turnover of 'V/N' Or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees; N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F (Annexure-VIB of GCC), along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria: as per Clause 10.1 of Part-I of IRSGCC-2022 (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b)(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. Note for Item 10.1 of IRSGCC-2022: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/ registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- C-5:Any Civil Engineering Work / Zonal maintenance works.
16 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The original BG (in lieu of Bid Security) should be delivered in person to the official nominated (i.e.OS/Tenders/Engg/GNT Division) before closing date for submission of bids.(i.e., excluding the last date of submission of Bids).
Tender value is including escalation of (-)15% (minus Fifteen percent) on CPWD DSR rates. Tenderer should note this before quoting the rates
All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.
Zone Nandyal - Tarlupadu (excluding ) to Nandyal (including) for the period from 01-07-2026 to 30-06-2027
494-DRM-W-GNT-Tid-2856
494-DRM-W-GNT-Tid-2856
Open
Works - General
12 Months
Guntur, Andhra Pradesh
₹0
₹2.2 L
16 Jun 2026
22 May 2026
2 Jun 2026
120 items across 1 schedule · ₹10,71,942.11 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | NS-GNT-DSR-22-Supply of GI coupling- 50 mm | Each | 10.00 | 160.55 | 1,605.5 |
| 2 | NS-GNT-DSR-23-Supply of GI T bend-50 mm | Each | 5.00 | 334.48 | 1,672.4 |
| 3 | NS-GNT-DSR-24-Supply of GI 'L' bend-50 mm | Each | 10.00 | 267.59 | 2,675.9 |
| 4 | NS-GNT-DSR-25-Supply of GI Union-50 mm | Each | 5.00 | 401.38 | 2,006.9 |
| 5 | NS-GNT-DSR-26-Supply of GI flanges -50 mm | Set | 10.00 | 535.18 | 5,351.8 |
| 6 | NS-GNT-DSR-27-Supply GI Gate valve Zoloto-50 mm | Each | 5.00 | 4,682.78 | 23,413.9 |
| 7 | NS-GNT-DSR-28-Supply of GI coupling- 40 mm | Each | 5.00 | 93.66 | 468.3 |
| 8 | NS-GNT-DSR-29-Supply of GI T-bend- 40 mm | Each | 5.00 | 200.69 | 1,003.45 |
| 9 | NS-GNT-DSR-30-Supply of GI L-bend- 40 mm | Each | 5.00 | 133.79 | 668.95 |
| 10 | NS-GNT-DSR-31-Supply of GI Union-40 mm | Each | 5.00 | 240.83 | 1,204.15 |
| 11 | NS-GNT-DSR-32-Supply of GI flanges -40 mm | Set | 5.00 | 468.28 | 2,341.4 |
| 12 | NS-GNT-DSR-33-Supply GI Gate valve Zoloto-40 mm | Each | 2.00 | 2,943.46 | 5,886.92 |
| 13 | NS-GNT-DSR'-34 Supply of GI coupling- 25 mm | Each | 5.00 | 53.52 | 267.6 |
| 14 | NS-GNT-DSR-35-Supply of GI T-bend- 25 mm | Each | 5.00 | 80.28 | 401.4 |
| 15 | NS-GNT-DSR-36-Supply of GI L-bend- 25 mm | Each | 5.00 | 66.9 | 334.5 |
| 16 | NS-GNT-DSR-37-Supply of GI Union-25 mm | Each | 5.00 | 133.79 | 668.95 |
| 17 | NS-GNT-DSR-'38-Supply GI Gate valve Zoloto-25 mm | Each | 5.00 | 1,471.73 | 7,358.65 |
| 18 | NS-GNT-DSR-45-Supply of GI T bend-20 mm | Each | 10.00 | 66.9 | 669 |
| 19 | NS-GNT-DSR-46-Supply of GI 'L' bend-20 mm | Each | 10.00 | 40.14 | 401.4 |
| 20 | NS-GNT-DSR-47-Supply of GI Union-20 mm | Each | 10.00 | 93.66 | 936.6 |
| 21 | NS-GNT-DSR-55-Supply of GI T bend-15 mm | Each | 10.00 | 40.14 | 401.4 |
| 22 | NS-GNT-DSR-56-Supply of GI 'L' bend-15 mm | Each | 10.00 | 26.76 | 267.6 |
| 23 | NS-GNT-DSR-57-Supply of GI Union-15 mm | Each | 10.00 | 66.9 | 669 |
| 24 | NS-GNT-DSR-59-Supply of GI Nipple 15 mm - 3 inch | Each | 15.00 | 20.07 | 301.05 |
| 25 | NS-GNT-DSR-'60 Supply of GI Nipple 15 mm - 4 inch | Each | 10.00 | 26.76 | 267.6 |
| 26 | NS-GNT-DSR-64-Supply of GI double acting Air valve -50 mm | Each | 2.00 | 6,555.89 | 13,111.78 |
| 27 | NS-GNT-DSR-65-Supply of GI double acting Air valve -100 mm | Each | 1.00 | 12,710.41 | 12,710.41 |
| 28 | NS-GNT-DSR-112-Supply of CPVC pipe 50 mm | Foot | 200.00 | 147.17 | 29,434 |
| 29 | NS-GNT-DSR-113-Supply of CPVC pipe 40 mm | Foot | 100.00 | 104.35 | 10,435 |
| 30 | NS-GNT-DSR-115-Supply of CPVC pipe 25 mm | Foot | 20.00 | 46.82 | 936.4 |
| 31 | NS-GNT-DSR-116-Supply of CPVC pipe 20 mm | Foot | 60.00 | 29.43 | 1,765.8 |
| 32 | NS-GNT-DSR-117-Supply CPVC 50 mm Coupling | Each | 100.00 | 173.93 | 17,393 |
| 33 | NS-GNT-DSR-118-Supply of CPVC 50 mm 'T' bend | Each | 100.00 | 294.35 | 29,435 |
| 34 | NS-GNT-DSR-119-Supply of CPVC 50 mm 'L' bend | Each | 200.00 | 240.83 | 48,166 |
| 35 | NS-GNT-DSR-120-Supply of CPVC 50 mm 45 bend (Half shoe) | Each | 100.00 | 254.21 | 25,421 |
| 36 | NS-GNT-DSR-121-Supply of CPVC 50 mm MAPT(Male Adopter plastic thread) | Each | 60.00 | 267.59 | 16,055.4 |
| 37 | NS-GNT-DSR-122-Supply of CPVC 50 mm FAPT (Female Adopter plastic thread) | Each | 60.00 | 254.21 | 15,252.6 |
| 38 | NS-GNT-DSR-125-Supply of CPVC 50 mm Union | Each | 10.00 | 401.38 | 4,013.8 |
| 39 | NS-GNT-DSR-126-Supply CPVC 50 mm Reducer 50x40 mm | Each | 30.00 | 214.07 | 6,422.1 |
| 40 | NS-GNT-DSR-127-Supply of CPVC 50 mm Bush 50x40 | Each | 30.00 | 120.41 | 3,612.3 |
| 41 | NS-GNT-DSR-128-Supply of CPVC 50 mm ball valve | Each | 20.00 | 1,204.14 | 24,082.8 |
| 42 | NS-GNT-DSR-129-Supply of CPVC 50 mm Tank nipples | Each | 20.00 | 334.48 | 6,689.6 |
| 43 | NS-GNT-DSR-130-Supply CPVC 50 mm convertor 50x50 | Each | 20.00 | 334.48 | 6,689.6 |
| 44 | NS-GNT-DSR-131-Supply Clamps CPVC metal clamps 50 mm | Each | 40.00 | 26.76 | 1,070.4 |
| 45 | NS-GNT-DSR-146-Supply CPVC 25 mm Coupling | Each | 30.00 | 78.94 | 2,368.2 |
| 46 | NS-GNT-DSR-147-Supply of CPVC 25 mm 'T' bend | Each | 30.00 | 93.66 | 2,809.8 |
| 47 | NS-GNT-DSR-148-Supply of CPVC 25x15 BT 'T' bend (brass tread) | Each | 20.00 | 147.17 | 2,943.4 |
| 48 | NS-GNT-DSR-149-Supply CPVC 25x15 BT reducer (Brass thread) | Each | 20.00 | 140.48 | 2,809.6 |
| 49 | NS-GNT-DSR-150-Supply of CPVC 25 mm 25x15 BT 'L' bend (Brass thread) | Each | 20.00 | 153.86 | 3,077.2 |
| 50 | NS-GNT-DSR-151-Supply of CPVC 32 mm 'L' bend | Each | 60.00 | 86.97 | 5,218.2 |
| 51 | NS-GNT-DSR-153-Supply of CPVC 25 mm MAPT(Male Adopter plastic thread) | Each | 100.00 | 93.66 | 9,366 |
| 52 | NS-GNT-DSR-154-Supply of CPVC 25 mm FAPT (Female Adopter plastic thread) | Each | 100.00 | 92.32 | 9,232 |
| 53 | NS-GNT-DSR-155-Supply of CPVC 25 mm MABT (Male Adopter Brass thread) | Each | 20.00 | 254.21 | 5,084.2 |
| 54 | NS-GNT-DSR-156-Supply of CPVC 25 mm FABT (Female Adopter Brass thread) | Each | 20.00 | 254.21 | 5,084.2 |
| 55 | NS-GNT-DSR-157-Supply of CPVC 25 mm Union | Each | 40.00 | 133.79 | 5,351.6 |
| 56 | NS-GNT-DSR-158-Supply CPVC 25 mm Reducer 25x20 mm | Each | 20.00 | 80.28 | 1,605.6 |
| 57 | NS-GNT-DSR-159-Supply of CPVC 25 mm Bush 25x20 | Each | 20.00 | 46.83 | 936.6 |
| 58 | NS-GNT-DSR-160-Supply of CPVC 25 mm ball valve | Each | 20.00 | 307.73 | 6,154.6 |
| 59 | NS-GNT-DSR-162-Supply of convertor 25X25 mm UPVC - CPVC | Each | 50.00 | 133.79 | 6,689.5 |
| 60 | NS-GNT-DSR-163-Supply Clamps CPVC metal clamps 25 mm | Each | 20.00 | 20.07 | 401.4 |
| 61 | NS-GNT-DSR-164-Supply CPVC 20 mm Coupling | Each | 100.00 | 24.08 | 2,408 |
| 62 | NS-GNT-DSR-165-Supply of CPVC 20 mm 'T' bend | Each | 50.00 | 29.43 | 1,471.5 |
| 63 | NS-GNT-DSR-166-Supply of CPVC 20x15 BT 'T' bend (brass tread) | Each | 20.00 | 107.03 | 2,140.6 |
| 64 | NS-GNT-DSR-167-Supply of CPVC 20x15 BT reducer (Brass thread) | Each | 40.00 | 93.66 | 3,746.4 |
| 65 | NS-GNT-DSR-168-Supply of CPVC 20 mm L bow | Each | 100.00 | 26.76 | 2,676 |
| 66 | NS-GNT-DSR-169-Supply of CPVC 20x15 BT 'L' bend (Brass tread) | Each | 50.00 | 100.35 | 5,017.5 |
| 67 | NS-GNT-DSR-170-Supply of CPVC 20 mm 45 bend (Half shoe) | Each | 20.00 | 28.1 | 562 |
| 68 | NS-GNT-DSR-175-Supply of CPVC 20 mm ball valve | Each | 40.00 | 240.83 | 9,633.2 |
| 69 | NS-GNT-DSR-176-Supply Clamps CPVC metal clamps 20 mm | Each | 40.00 | 13.38 | 535.2 |
| 70 | NS-GNT-DSR-177-Supply CPVC solvent cement (Gum) 59 ml | Each | 200.00 | 147.17 | 29,434 |
| 71 | NS-GNT-DSR-180-Supply of Teflan tape | Each | 200.00 | 33.45 | 6,690 |
| 72 | NS-GNT-DSR-181-Supply of CPVC 40 mm L- bend | Each | 40.00 | 167.24 | 6,689.6 |
| 73 | NS-GNT-DSR-182-Supply of CPVC 40 mm T- bend | Each | 40.00 | 180.62 | 7,224.8 |
| 74 | NS-GNT-DSR-183-Supply CPVC 40 mm Coupling | Each | 40.00 | 120.41 | 4,816.4 |
| 75 | NS-GNT-DSR-186-Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 110mm dia | Foot | 200.00 | 120.41 | 24,082 |
| 76 | NS-GNT-DSR-187-Supply of UPVC coupler for UPVC drainage pipes 110 mm | Each | 100.00 | 254.21 | 25,421 |
| 77 | NS-GNT-DSR-188-Supply of UPVC plain shoe 110 mm bend | Each | 40.00 | 220.76 | 8,830.4 |
| 78 | NS-GNT-DSR-189-Supply of UPVC plain shoe 110 mm T-bend | Each | 40.00 | 361.24 | 14,449.6 |
| 79 | NS-GNT-DSR-190-Supply of UPVC pipe clip 110 mm bend | Each | 40.00 | 53.52 | 2,140.8 |
| 80 | NS-GNT-DSR-191-Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 75mm dia | Foot | 200.00 | 82.95 | 16,590 |
| 81 | NS-GNT-DSR-192-Supply of UPVC coupler for UPVC drainage pipes 75 mm | Each | 60.00 | 194 | 11,640 |
| 82 | NS-GNT-DSR-193-Supply of UPVC plain shoe 75 mm bend | Each | 40.00 | 133.79 | 5,351.6 |
| 83 | NS-GNT-DSR-194-Supply of UPVC plain shoe 75 mm T-bend | Each | 40.00 | 200.69 | 8,027.6 |
| 84 | NS-GNT-DSR-195-Supply of UPVC pipe clip 75 mm bend | Each | 40.00 | 40.14 | 1,605.6 |
| 85 | NS-GNT-DSR-196-Supply of U-PVC pipes (working pressure 4 kg/cm2) Single socketed pipe 50mm dia | Foot | 100.00 | 40.13 | 4,013 |
| 86 | NS-GNT-DSR-197-Supply of UPVC plain shoe 50 mm bend | Each | 10.00 | 53.52 | 535.2 |
| 87 | NS-GNT-DSR-198-PVC solvent | Litre | 5.00 | 561.93 | 2,809.65 |
| 88 | NS-GNT-DSR-221-Supply of Circular shape 450 mm dia Mirror with Plastic moulded frame | Each | 10.00 | 869.66 | 8,696.6 |
| 89 | NS-GNT-DSR-222-Supply of Mirror of superior make glass 60x45 cm (With 5-6mm thick base complete) | Each | 10.00 | 1,070.35 | 10,703.5 |
| 90 | NS-GNT-DSR-250-Supply of CP brass Swan neck pillar cock | Each | 5.00 | 2,408.29 | 12,041.45 |
| 91 | NS-GNT-DSR-223-Supply of PTMT bib-cock 15 mm dia (prayag) | Each | 50.00 | 401.38 | 20,069 |
| 92 | NS-GNT-DSR-224-Supply of PTMT Push cock 15 mm dia | Each | 150.00 | 267.59 | 40,138.5 |
| 93 | NS-GNT-DSR-225-Supply of PTMT Angle valve 15 mm dia | Each | 50.00 | 307.73 | 15,386.5 |
| 94 | NS-GNT-DSR-226-Supply of PTMT pillar cock 15 mm dia | Each | 50.00 | 468.28 | 23,414 |
| 95 | NS-GNT-DSR-227-Supply of PTMT Long body bib-cock 15 mm dia | Each | 50.00 | 495.04 | 24,752 |
| 96 | NS-GNT-DSR-228-Supply of PTMT Two-way bib- cock 15 mm dia | Each | 30.00 | 508.42 | 15,252.6 |
| 97 | NS-GNT-DSR-229-Supply PTMT Two-way Angle valve 15 mm dia | Each | 30.00 | 508.42 | 15,252.6 |
| 98 | NS-GNT-DSR-230-Supply of PTMT Health Facuent including gun,pipe and brackets | Each | 25.00 | 602.07 | 15,051.75 |
| 99 | NS-GNT-DSR-231-Supply of PTMT towel rail | Each | 10.00 | 334.48 | 3,344.8 |
| 100 | NS-GNT-DSR-232-Supply of PTMT towel ring | Each | 10.00 | 307.73 | 3,077.3 |
| 101 | NS-GNT-DSR-235-Supply of PTMT Nylon connection 600 mm lenth 15 mm | Each | 20.00 | 133.79 | 2,675.8 |
| 102 | NS-GNT-DSR-240-Supply of White plastic W C seat (solid) with lid C.P. brass hinges and rubber buffers | Each | 20.00 | 602.07 | 12,041.4 |
| 103 | NS-GNT-DSR-241-Supply of Flushing cistren 10 litres l o w level cistern w i t h fittings standard make | Each | 10.00 | 1,672.42 | 16,724.2 |
| 104 | NS-GNT-DSR-243-Supply of u r i n a l fl a t back 380x400x590 mm large size with waste fittings | Each | 5.00 | 2,274.49 | 11,372.45 |
| 105 | NS-GNT-DSR-245-supply of SS waste coupling for steel sink | Each | 20.00 | 535.17 | 10,703.4 |
| 106 | NS-GNT-DSR-246-Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings | Each | 15.00 | 107.03 | 1,605.45 |
| 107 | NS-GNT-DSR-248- P.V.C. connection pipe with brass union 45 cm long 15 mm bore (Nylon connection) | Each | 20.00 | 173.93 | 3,478.6 |
| 108 | NS-GNT-DSR-255-Supply of Ordinary Portland Cement-53 grade | per 50 kg of cement | 60.00 | 481.66 | 28,899.6 |
| 109 | NS-GNT-DSR-257-Supply of unslaked lime | Quintal | 20.00 | 401.38 | 8,027.6 |
| 110 | NS-GNT-DSR-258-Supply of bleaching powder | Quintal | 0.50 | 2,408.29 | 1,204.15 |
| 111 | NS-GNT-DSR-260-Supply of white cement | Tonne | 0.05 | 14,984.9 | 749.25 |
| 112 | NS-GNT-DSR-261-Hiring of road crane of 25MT capacity with all contractors men, consumables and machinery | Hour | 15.00 | 1,337.94 | 20,069.1 |
| 113 | NS-GNT-DSR-262-Hiring of JCB with all contractors men, consumables and machinery | Hour | 20.00 | 1,337.94 | 26,758.8 |
| 114 | NS-GNT-DSR-73-Supply of M-seal packet 80 grams | Each | 25.00 | 46.83 | 1,170.75 |
| 115 | NS-GNT-DSR-74-Supply of pig lead | Kg | 3.00 | 535.18 | 1,605.54 |
| 116 | NS-GNT-DSR-16-Supply Coarse Sand at specified locations | cum | 3.00 | 1,662.62 | 4,987.86 |
| 117 | NS- GNT-DSR-75-Supply of Hydraulic door closer ISI marked (IS:3564-1996) | Each | 10.00 | 2,241.05 | 22,410.5 |
| 118 | NS-GNT-DSR-76-Supply of SS Fly proof wire mesh (4 feet height) | Square Foot | 2000.00 | 36.12 | 72,240 |
| 119 | NS-GNT-DSR-93-Supply of Cub board Magnets | Each | 100.00 | 16.06 | 1,606 |
| 120 | NS-GNT-DSR-111-Supply of sun control film black colour. | Square Foot | 200.00 | 24.08 | 4,816 |
| Schedule total | ₹10,71,942.11 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ZonalMasterTenderDocument2025-WithACS-11.pdf
ATTACHMENT
GCC_April-2022_2022ACS1to11-Merged-compressed1.pdf
ATTACHMENT
SpecialConditionsofZones2026.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf List of Approved Brands
ATTACHMENT
DesignMixOnsitelabandTestingofMaterials.pdf
ATTACHMENT
SiteRecordstobemaintainedport3.pdf
ATTACHMENT
RevisedApprovedlistofBrandsandMakes2026withallenclosures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .