Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.5 LAccepted-AOC 54 KANWALI ROAD DEHRADUN 248001 | DEHRADUN | UTTARAKHAND | 248001 | L1 | Accepted-AOC AOC accepted. | |
| 2 | L2₹52.0 L+₹3.6 L (7.34%)Rejected-AOC 11 CIVIL LINES ROORKEE 247667 DISTT HARDWAR UK | HARIDWAR | UTTARAKHAND | 247667 | L2 | Rejected-AOC AOC rejected. |
Tender Value
₹47.8 L
EMD Value
₹95,600
Closing Date
30 Apr 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehradun
GE (MES) Dehradun, Garhi Cantt, Mall Road, Tele - 01352750580
Welcome maintenance of offrs md accomodation at SP road and Beacher road under AGE BR-I of GE Dehradun
2022_MES_516620_1
8448/A/E8
Open Tender
Civil Works
Item Rate
120 days
GE Dehradun
Class D Cat a(i)
8 documents required · 8 mandatory
₹500
GE Dehradun
₹95,600
18 Aug 2022
5 Apr 2022
2 May 2022
5 Apr 2022
30 Apr 2022
19 Apr 2022
60 days
Amount
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concretebut excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and ditected.
M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 , using old size bricks, complete all as specified and ditected.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls but in in cement mortar 1:4 (using old size bricks) complete all as specified.
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed.
Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge.
M & L rendering 10mm thick in cement mortar 1:3 on fair faces of concrete work even and smooth as in ceiling complete all as specified and ditected.
M & L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, filling , post base & mass concrete complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.
M&L for cement concrete (1:2:4) type B-1(using 20 mm graded stone aggregate) 25 mm thick as in floor, finished even and fair, complete all as specified and as directed .
M&L 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone agg as in sub base ,complete all as specified and as directed by the Engr-in-Charge.
M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement and demolition of existing old cement concrete of plinth protection in ground floor and paving below or above ground level complete.
M&L for Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate ) as in foundations, filling and mass concrete complete all as specified and directed.
M & L for 40 mm thick Cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in sub floor,levelling course,kerb on roof slab / chajjas/ junction of parapit etc including demolition of existing concrete, complete all as specified and directed.
Taking down chowkat with shutter of any description (without taking of shutter from frame) n. exc 1.5 Sqm each complete all as specified and as directed .
Taking down chowkat with shutter of any description (without taking of shutter from frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and as directed .
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.
Taking down shutters of any description n. exc 1 sqm each complete all as specified and directed.
S&F 30 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.
S&F factory made 100 % solid wood plastic composite (WPC) door frame 125x65 x50mm size, made from 100 % lead free wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge
Supply and fix flush shutters 35 mm thick one face is covered with decorative face veneer teak wood finished with lipping/frame to match , solid core construction, with block board core and plywood face panels, commercial type on other sides, complete all as specified and as directed.
S & F 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a) and as directed.
S&F factory made 100 % solid wood plastic composite (WPC) door frame 75x50 x50mm size, made from 100 % lead free wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity all as per specification and drawing as directed by Engineer-in-Charge
S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified and directed.
S & F 30 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (b) and as directed.
S&F 18 mm thick FRP shutter,FRP sheet on both side pre laminated(3+12+3 mm) and edges to be sealed with suitable PVC edge binding tape with matching colour in kitchen cabinet shutter/ drawer,cub board shutter etc complete all specified.
S&F in repair 6 mm thick WPC board one side prelaminated and plain white colour other sideas in cub board selves etc fixed with screws, salvent cement/ adhessive , complete all as specified.
S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete with glazing bars dovetailed or welded with one shop coat of primer complete all as specified and directed.
S&F factory made steel windows with side hung shutters including box type hinges with MS handles and tower bolts complete without glazing bars, as fly proof shutters with one shop coat of primer complete all as specified and directed.
S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification & drawing as shown in SSR part II complete all as specified and as directed.
S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in frame at site as per specification & drawing as shown in SSR part II, complete all as specified and as directed.
S&F in repair aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A(15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm .
S&F in repair powder coated Aluminium partition (Fixed) made out of aluminium powder coated section 83 x 44.45 x 2.00 mm including 5 mm thick glass/ACP Sheet complete with rubber packing/aluminum beading etc including dismantling of exixting structure complete all as specified and directed.
S&F in repair aluminum alloy powder coated door made out of hollow extruded aluminum section as mentioned below. Each door having 02 Nos Disc or D type handle, 02 Nos aluminum tower bolt 200 mm size, one brass mortice lock of six lever with key in duplicate regulated by double action hydraulic floor spring heavy duty (Make:- Sandhu/Ritz) shutter to be partly glaze with 5mm thick tined coloured glass in upper pannel and partly pannelled with 12mm thick both side laminated particle board in lower pannel fixed with glazing clip, rubber beading/gasket, anodised aluminum beading screw complete all as specified and directed at site. Chowkhat Frame:- 101.60x44.45x1.60mm Shutter verticle style :- 85x44.45x1.56mm shutter middle Rail :- 83.50x44.45x1.54mm Shutter Top Rail and bottom Rail :- 114.30x44.45x1.55mm
S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F in repair Brass Mortice lock, four levers vertical type, size 100 mm size complete all as specified and directed.
S&F stainless steel 304 grade wire 0.36 mm nominal dia of wire and average width of aperture 1.40 mm as in wooden or metal frame of any description complete all as specified and as directed.
S&F 200 mm long, solid in one piece stainless steel barrel tower bolts 204 grade,complete all as specified and directed.
S&F 150 mm long, solid in one piece stainless steel barrel tower bolts 204 grade,complete all as specified and directed.
S&F 150 mm long, solid in one piece stainless steel handle 204 grade, D type ,complete all as specified and directed.
S&F 125 mm size ,solid one piece stainless steel handles,204 grade, D type, complete all as specified and directed.
S&F 100 mm size stainless steel butt hinges 204 grade and fixed with stainless steel screws, complete all as specified and directed .
S&F 75 mm size stainless steel butt hinges 204 grade and fixed with stainless steel screws, complete all as specified and directed .
S&F stainless steel sliding door bolts 300 mm long, 204 grade, hasp and staple type with bright bolt not less than 12mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate ,complete all as specified and ditected.
S&Fin repair mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched, hold fast , including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
S&F in repair chrome plated stainless steel wire basket (storage basket) pull out type for large utensils of size 480 x 500 x 150 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly
S&F in repair chrome plated stainless steel wire basket (plate basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly
S&F in repair chrome plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly
S&F in repair chrome plated stainless steel wire basket (cutlery basket) pull out type for large utensils of size 380 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly
S&F in repair chrome plated stainless steel wire basket (grain trolly basket) pull out type for large utensils of size 480 x 500 x 100 mm of grade 304 with necessary fixing clips etc. complete all as specified and as directed. Make : Hettich, Hafele, Butterfly
S&F in repair 25 mm dia stainless steel polished 204 grade drapery rod 1mm thick with final decorative, including brackets, decorative nobs at both ends complete all as speccified and directed as per approved sample .
S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F Hasp and staple 100mm safety type, stainless steel with hinge pin202 grade, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 100 mm size fancy type ,solid one piece stainless steel handles,204 grade, D type, fixed with stainless steel screws for kitchen cabinet, complete all as specified and directed.
S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs , complete all as specified and directed. Make :Hexa/ Hettich/ Hafele
S & F Continuous (Piano) hinges, stainless steel, bright finished or stainless steel 304 grade, width of flaps (When open) 30 mm complete all as specified and ditected.
Hacking out old broken glass any thickness,size or description from wooden frames etc glazed with oil putty or wooden beads,complete all as specified.
M & L sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.
M & L 4mm thick figured glass, pin headed and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane complete all as specified and directed.
S&F stainless steel auto closing 35 mm of o crank(KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. Make :Hexa/ Hettich/ Hafele
S&F in repairs stainless steel peg set of five with cromium plated back plate 304 grade,40mm wide fixed with chromium plated screw, complete all as specified and directed.
S&F in repair powder coated aluminiumventilator fixed type half glazed and half gauged with and including hardware fittings,glazing,wiregauge, rubber packing, aluminium beading etc as specified below and making good of wall surface to match the existing surface complete all as specified :- Frame;- 44.5x44.5x1.08 mm thick fixed with rawal plug Top/bottom rails,middle and side style of shutter- 44.5x44.5x1.08 mm thick Glazing beading;- 0.70 mm thick Glass;- 5 mm thick frosted glass wire mesh Stainless steel of 0.063 mm nominal dia wire and average width of arperture 1.40 mm ,aluminium grill with frame
S&F in repairs 18 to 20 mm thick veneered particle board interior grade,solid core medium density general purpose type with commercial face veneers type 'BB' as in cub board shelves including hinges,fancy handle,channel and second class hard wood plain fillets,square,rectangular or triangular in section,wrought,secured with nails or beads,cross sectional area exe 3 and n. exe 6 sqcm ,complete all as specified and directed.
S&F in repair PVC sheet wall panelling of thickness 5 mm, consisting of panel having size 1220x2440 stuck on inner frame work of 50mm wide strips of 5mm thick PVC sheet. The strip shall have in their centre a groove of 6mm width and 1mm depth of sinking the head of the screw used to fixed the strip to the wall vertically at an equal interval of 250mm between two PVC strip. The PVC strip shall be fixed to wall using 65mm long MS screw & through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panel for astheic looks, the exact size of the panel and correspondingly the grid may vary depending on size of wall, complete all as specified and directed.
M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified
M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over and including screed bed 15 mm thick in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified
M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting/ dado etc. over and including rendering/screed bed 10 mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including dismantling of existing tiling complete all as specified
M&L non-skid / mat finish designed coloured joint free ceramic tiles of size not less than 400 mm x 400 mm x 6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 350mm x 250mm x 7mm/ 450x 350 x 7mm thick over and including 10 mm thick bedding layer in CM 1:4 , set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile including dismantling existing tiles with baking complete all as directed.
S&F TMT MS bar 10mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .
M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and colums, in floors, roofs, landing balconies, canopies, deck slabs, chajja and in shelves and the like including demolition of old RCC, complete all as specified and directed.
M&L for use waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, chajja and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete complete all as specified and directed.
S&F in repairs of rubberised body door cill at bottom part of door to stop entry of insect inside the room not less than 90 cm,complete all as specified and as directed.
M&L heavy duty anti skid parking coloured tiles 10 mm thick dark shade (square/rectangular) polished,area of each tiles not exceeding 0.18 sqm, in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified.
M&L for coloured pre-polished rubber moulded chequred cement concrete tile 300mm x 300mm x 20-22mm thick with anti skid properties set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.
S&F granite 16-18 mm thick of any type ( table rubbed and polished in steps, jambs pillars, window cill, cooking platform and like in cement mortar 1:4 incl pointing in white cement including demolition of old stone etc, complete all as specified and ditected.
M&L for preparation of old decorated surfaces of walls (plastered) by brooming down with steel wire brushing, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and finally clean with sand paper /electric sand paper grinder,all as directed by Engr-in-Charge.
M&L for interior grade wall care putty 1mm thick to make the wall surface smooth complete all as specified and directed
M&L two coat oil bound distemper by roller of any tint over a coat of primer on already prepared old surfaces of walls etc, complete all as specified in SSR Part I, complete all as specified and directed .
M&L one coat of oil bound distemper of any tint on already prepared old surfaces of wall etc complete all as specified in SSR Part I and directed by Engr-in-Charge
M&L for preparation of wall and applying exterior grade acrylic water proof wall care putty 1mm thick to make the surface smooth as specified and directed .
M&L two coat of cement base paint on external wall surfaces including complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge.Note : The work will be carried out upto double storey builing the rate of scafolding is included in quored rate.
M&L for two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.
M&L for preparation of new or previously untreated surfaces of wood over 10 cm width/girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified in SSR Part I and directed .
M&L for two coats of distemper oil emulsion over a coat of suitable primer including preparation of new surfaces of wall etc, complete all as specified and directed.
M&L for two coats of cement base paint over a coat of suitable primer including preparation of new surfaces of wall etc, complete all as specified and directed.
M&L for two coats of damp proof paint of any tint on plastered surface of roofs etc including preparation of plastered surfaces of any description , complete all as specified and directed.
M&L for applying 1 mm thick POP over plastered surface to receive even and smooth surface ,complete all.as specified and directed
M&L two coat of weather proof exerior emulsion paint of any tint over a coat of primer on walls etc including complete removal of old existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. Note : The work will be carried out upto double storey builing. The rate of scaffolding is included in the quoted rate.
M&L two coat of white wash on old walls surface including preparation of surfaces,complete all as specified and directed.
M&L one coat of white wash on old celing surface including preparation of surfaces,complete all as specified and directed.
M&L three coat of white wash on new celing surface including preparation of surfaces,complete all as specified and directed.
M&L for preparation of old surfaces of wood of any description over 10 cm width/girth and applying one coat of synthetic enamel paint, complete all as specified in SSR Part I and directed .
M&L Rendering 15 mm thick with WPC on parapet, chajja, facia,celing etc in CM 1:3 and finished surfaces even and smooth (with out using extra cement) on external surfaces including two coat of whether proof exterior emulsion paint , over a coat of primer including taking down of old plaster of any description complete all as specified and directed. Note : .Water proofing compound shall be measured and paid separately as supply only.
Taking down of existing treatment and M&L for water proofing treatment with fiber reinforced elastomeric liquid applied on roof slab/chajja/perapet including picking, sweeping clean and washing down with water to remove dust & providing water proofing treatment ,damp proof described as under:- (a) Preparation of surface, filling of cracks with Smart care Hybrid PU Sealant wherever required. (b) Providing PCC (1:2:4) type B-0, 25mm thick screed bed or bedding layer over roof surface . (c) Providing and applying smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinfocing acrylic fibers having sun reflectivity index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10sqm. one coat of self- priming of elastomeric waterproofing liquis (dilution with water in the ratio of 1:3) and two coats of undiluted elastomeric waterproofing liquid (dry flim thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer -in - charge . when the 2nd coat is wet, the smartcare EPDM tape (at corners and edges) shall be inserted of smartcare Damp proof shall be continued to the parapet wall/chajja/facia etc to better envelope the whole area. The coating shall be terminate carefully to the other side of the parapet/chajja/facia.Make: Asian Paint Smart care or equalvent as approved by GE. Note : Execution to be done with authorised applicator of the manufacturer. Work will be executed in smart assurance system. The work will be carried out upto double storey builing. The rate of scafolding is included in the quoted rate for item.
Supply only integrated water proofing compound complete as per manufacturer's instructions.
Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing and removing from site ,complete all as specified and directed.
M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10 but not exc 20cm girth complete all as specified.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing, complete all as specified and directed.
S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including dismantling & taking down existing old u/s tank and removing from site,complete all as specified and ditected.
S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including dismantling & taking down existing old u/s tank and removing from site,complete all as specified and ditected.
S & F in repairs 20 mm size PTMT ball valves, high pressure with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of any bore & in any position,complete all as specified and as directed.
S & F in repairs 15 mm size PTMT bib cock short body, high pressure ,screwed for iron pipe ,complete all as specified and as directed.
S&F in repair 32mm dia PVC waste pipe for WHB and sink not less than 80cm long with coupler/ union,complete all as specified and directed.
S&F in repair CP Brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot & cold water with telephonic shower provn with connecting legs & Flanges complete all as specified and directed. Make : Jaquar Model No CON 281KN, HSH 1929 & OHS 1989 or equivalent in Hindware/ Parryware.
S&F in repair 15mm dia CP brass chromium plated Central hole basin mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed. Make : Jaquar, Cat Pat No SOL-6001B or equivalent in Hindware / Parryware.
S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. Make- Jaquar ALI -85037 or equivalent in Hindware/ parryware.
S&F in repair 15mm bore Bib taps short body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair 15 mm bore Angle cock/stop valves cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.
S&F in repair 15mm dia CP brass chromium plated kitchen sink mixer with accessories for fixing hot and cold water, dcrewed down for 15mm bore GI pipe, complete all as specified and directed. Make- Jaquar Florentine FLR CHR -5309N or equivalent in Hindware/ parryware.
S&F in repair CP Health Fauset with 1.20 mtr metalic expandable tube & hook complete all as specified and directed.Make : Jaquar Cat Pat No ALE-ESS-585 or equivalent in Hindware/ Parryware.
S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. Make: Jaquar Cat Pat No OHS 1999 (Shower) & SHA479L300 (Arm) or equivalent in Hindware/Parryware.
S&F in repairs vitreous chinaware wash down water closet pan (Padestal pattern) fency type including fixing bolt, flushing cistern, Dual flush single piece EWC with soft close seat cover fittings 'P' or 'S' trap complete all as specified and dircted.Make- Jaquar Cat Pt No SLS-WHT 6855 S Or equivalent in Parryware / Hindware
S&F in repairs vitreous china wash down water closet Padestal pattern white (excluding flushing cistern and fluch pipe) with CI 'P' or 'S; trap including plastic white seat cover, CP Jet spray with 1.0 mtr long PVC pipe, connecting to stack pipe and to flushing pipe and complete including making good to floor complete all specified and directed.Make: Hindware/Parryware/Jaquar.
S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed including 100mm dia CI 'P' trap of 60cm long.
S&F in repair 10 litre capacity PVC low level flushing cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified.
S&F PVC connection 15mm size with PTMT nuts, of 450 mm length complete all as specified and directed..
S&F in repair vitreous china wash hand basin, white flat back, size 550x400 mm excluding taps but including waste pipe, CP waste fittings 32mm size long shank and MS brackets all as specified and directed by Engr-in-charge Make: Cera, hindware, parryware
S&F in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in repair brass spindal for bib tap, pillar tap,stop cock,angle valve,wall mixture and basin mixture of any description etc, complete all as specified and directed.
S&F in repair 32mm waste fitting /coupling,brass, chromium plated for sink,basin, etc with long screwed shanks and fly nut complete all as specified and directed.
S&F in repair CP steel grating 100 mm to 125mm dia round fix on floor/nahani trap with hole/without hole fixed with cement morter/ adhessive, complete all as specified.
S&F in repair glass corner shelf suitable size made of 5 mm thick toughened glass with CP railing complete all as specified.
S&F in repair glass shelf assembly consisting of 5.5 mm thick toughened glass with CP railing and brass brackets of size 500x125 mm, complete all as specified.
S&F in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade sheet incl coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed.
S&F in repairs CP brass Soap dish 6 inches size, complete all as specified and directed.
S&F in repair 20 mm dia brass chromium plated tubular towel rail ,D type,60 cm long between flanges,complete all as specified and directed.
S&F 75 mm dia PVC (SWR) multi floor trap, with CP grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.
S&F110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ wall etc with PVC clamp and holder bats complete all as specified.
S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches/ wall etc with PVC clamp and holder bats complete all as specified.
S & F PVC (SWR) bends, reducer any radius ,T socket reducer etc with ovel access door with rubber ring joints, fixed to wall / floor / in trenches for 110 mm dia pipe, complete all as specified and directed.
S & F PVC (SWR) bends, reducer any radius, T socket reducer with ovel access door with rubber ring joints, fixed to wall / floor / in trenches for 75 mm dia pipe, complete all as specified and directed.
Taking down CI/AC/PVC pipes and fittings upto 110mm dia in any position and removing from site complete all as specified and directed.
S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 100 mm bore CI pipe.grouted in PCC 1:2:4 complete all as specified.
S&F in repair Stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, incl nut and bolts and securing ends of stay to wall or roof for 75 mm bore CI pipe.grouted in PCC 1:2:4 complete all as specified.
S&F heavy duty thread type PVC water tank cover with frame fixed on PVC tank with 4 Nos of screws for 500/1000 ltrs tank complete all as specified and directed .
Removing the manholes covers (CI or RCC) any type of manholes rectangular/ circular and de-sluding /de-watering of septic tank and soakage well of any size and depth by mechanical pumping by plugging inlet as requried (5000 ltr capacity) dispose off out of MD land and making it fully functional to the entire satisfaction of Engr -In- Charge including carrying the effluent and re-instating the manholes cover to its original postion complete all as specified and directed .
Dismantling asbestos cement (corugated or semicorrugated etc) sheets, in roof covering/shed including ridge.etc , complete all as specified.
S&F Pre-painted galvantume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to walls/chajja covering,ridge etc fixed with self tapping screws as specified
S & F Acrylic PVC sheeting 2 mm thick fixed with screw and washer in gate/ fencing,roof, wall etc complete all as specified and as directed .
S&F MS rolled sections / tubular pipes etc as in main and cross beams ,rafters, purlins etc confirming to Fe-290(Grade E-165) , complete all as specified.
Dismantling of wrought iron or mild steel work of any descriptionnot and in any position, other wise provided for, complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep in soft/loose of soil for foundation, etc. or for shafts, wells, cesspits, manholes, pierholes, cable etc. and getting out complete all as specified and directed.
Excavation in post holes (or similar holes) each n exc 0.50 cum, getting out soil & removing to a distance n exc 50 meter and making good surface in any type of soil complete all as specified.
Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed
Supply only MS chain link fencing 3mm dia, GI plain wire, 50x50mm mesh or type weight n.exc 4 kg per square meter complete all as specified and directed.
Fixing only chain link fencing, including line wire any mesh, size & type to any type of standard rail, straining bolt etc, including provision of binding wire.
S&F mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long ,complete all as specified.
S&F mild steel work as in wind ties for roof including securing bolts, post and strut in fencing including cutting tops to shape as directed drilling holes, notching for wire etc. flat iron fillets for securing wire mesh, 10 mm dia MS round bars including all necessary drilling and bolting and similar work confirming to Fe-290 Gde E-165 complete all as specified and directed.
S &F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. ( Each line wire to be measured) complete all as specified and directed.
Dismantling of post or struts any type and any section including taking out embeded portaion and making good distrubed ground and rubbish off the permises complete all as specified and directed.
S & F in replacement tiled false ceiling of Everest Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips or 3mm dia GI wire spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm, all 'T'' sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engineer-in-Charge.
Cutting into existing manholes /septic tanks for connecting new drains 150mm dia making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete al as specified and directed.
Demolition and breaking up drain pipes (SGSW, AC or reinforced concrete) 150mm bore set in cement mortar complete all as specified and directed.
Supply, laying, jointing and testing salt glazed stone ware drain pipe 150 mm Internal dia, grade ‘A’ confirming to IS–651–1980 laid in trenches and jointed in cement mortar 1:1 complete all as specified.
M&L for in PCC (1:3:6) type C-2 (using 20 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.
Taking down & refixing of existing steel rolling shutters any type, greasing and other repair work required with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete push pull or manual type exc 10 Sqm and not exc 20 Sqm each.
M&L for factory made precast cement concrete type B0 1:2:4 (using 12.5mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid) set in CM 1:4, including all mould- ings including demolition of existing broken jafri wall complete all as specified and as directed.
Supply and Fixing in replacement 30 wattsLED Bldg security Light Luminaire with min 10 kv surge protector die cast aluminum housing LDR sensor for automatic opretion including suitable bracket of GI tubing 32 mm dia med grade to reqd shape with clamp fastner,nut bolts& washer of min 1.2 m sizewith grouting to wall etc and connecting to electric source with 3 core 1.5 sqmm insulated copper cable, complete all as specified and directed.
S&F in replacement mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
S&F in replacement LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size , complete all as specified.
S&Fin replacement LED light fitting decorative wall mounting SS brush finish fixture with frosted glass suitable for upto 1x40 watt mini glass lamp with and including one no 12 watt LED lamp. complete with accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified.
S&F in replacement of U/S Tamper Proof electronic single phase whole current energy meter (LCD Display) 10 Amp to 60 Amp, 240 volt class 1.03 and class 2.05 AC supply including cable connection, proper sealing with lead. The meter shall comply with the latest version of IS-13779 with atleast 2 anti tamper LED indication of line load reversal and earth loading indication including electrical connection with existing system and sealing properly including push fit type pvc box complete. The meter shall work satisfactory with guarantee accuracy as per limit of IS-13779. The meter shall be fixed on existing steel boxes on wall complete all as specified and directed. (Note: Old U/S Meter shall be deposited to E/M store yard). Make:- L&T/ Legrand/Secure/BHEL.
Materials and Labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm c/c both ways, and with one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil and necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009) and as directed.
S&F in replacement LED tube light fitting 20/22 watts batten type with extruded aluminium body and polycarbonate covers,diffuser all in one single phase with lamp 6500/4000 k pre-wired with all accessories ,complete all as specified .
Supply and fixing in replacement single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 volts complete all as specified.
S&F MCB single pole 240 volt ,10 KA 6 to 40 Amp,'C' curve,10 KA breaking capacity, conforming to relevant IS complete all as specified & directed.
S&F Isolator SPN , 240 Volt, 10 KA breaking capacity, 40 Amp to 63 amps, conforming to IS complete all as specified.
S&F MCCB 415 Volt ,16 KA breaking capacity, 4 pole, 100 Amp with and including spreader link kit suitable for fixing as incoming in bus bar , complete all as specified and directed.
S&F in repair factory made distribution board vertical type TPN , 4 way , double door,suitable for MCCB63/100 ampsas incoming and MCB's for outgoing ,IS 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel,neutral and earthing link and bus bar,DB's of IP 43 protection shall be semi glossy finished with epoxy polyster based powder paint sprey and baked at high temperature,painted in seven tank process,complete all as specified and directed .
S&F in repair factory made distribution board SPN , 8 way , double door,suitable for mounting of MCBs, isolators,ELCB's etc ,IS 13032 marked with valid CM/L No fabricated out of CRCA sheet not less than 1.2 mm thick fitted with DIN channel,neutral and earthing link and bus bar, complete all as specified and directed .
Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Eng-in-charge.
M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , drawing through non metalic PVC concealed conduit med grade of suitable size not less than 19 mm bore with all fittings and acessories including factory made MS pressed steel modular flush boxes with zink coated duly concealed in wall for mounting of modular switches,sockets,fan regulators etc and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugs as required for following :- (Note:- 1. Modular switches boxes and cover plates shall be measured and paid separately. 2. Colour code shall be maintained as per IE rule.).
One light/ bell point controlled by one,one way switch
One ceiling fan/ exhaust fan point controlled by one-one way switch through Regulator.
One three pin 5 Amp socket on same board with other switches.
One three pin 5 Amp socket on independent board
All as per item No 176 here in before but with 2.5 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 3 pin 15 Amp socket outlet point on independent board complete all as specified and directed.
M & L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke ( FRLS ) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core , drawing through exisitng conduit (without socket, elbow, junction box, bell mouth, bend, reducer) and 1.5 Sqmm. (nominal area) single core FRLS,PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable green colour as earth wire upto common earth and connected to earth dolly complete all as specified including lugsas required for following :- ( Note:- 1. Modular switches and cover plates shall be measured and paid separately. 2. Colour code shall be maintained as perIE rule.).
One light/ bell point controlled by one,one way switch
One ceiling fan/ exhaust fan point controlled by one-one way switch through Regulator.
One three pin 5 Amp socket on same board with other switches.
One three pin 5 Amp socket on independent board
One light/ bell point controlled by two No ,two way switch
All as per item No 178 here in before but with 2.5 Sqmm copper conductor cables (multistranded) PVC insulated FRLS, unsheated cable and including 4 Sqmm copper conductor cable (multistranded) PVC insulated FRLS and unsheated cable earth continity wire to common earth and connecting to earth dolly for one 3 pin 15 Amp socket outlet point on independent board complete all as specified and directed.
S&F switch modular 6 Amps 230 Volts, one way ,single pole , complete all as specified and directed.
S&F switch modular 6 Amps 230 Volts, two way ,single pole , complete all as specified and directed.
S&F Socket modular 6 Amps, AC 230 Volts ,5 pin , 2 module, complete all as specified and as directed
S&F Modular switch socket combination, 16 Amps ,6 pin of 3 module , complete all as specified and as directed.
S&F moduler bell push 6 Amp , one module ,one way ,complete all as specified.
S&F combind cover plate with modular frame white 1 or 2 module suitable for modular switches complete all as specified and directed.
S&F combind cover plate with modular frame white 3 module suitable for modular switches , complete all as specified and directed.
S&F combind cover plate with modular frame white 6 module suitable for modular switches , complete all as specified and directed.
S&F combind cover plate with modular frame white 8 module suitable for modular switches single or double row, complete all as specified and directed.
S&F combind cover plate with modular frame white 12 module suitable for modular switches 3 rows, complete all as specified and directed.
S&F Electric calling bell ,AC 230 V, single pole complete all as specified and directed .
S&F step type, modular fan regulator 120 watts, 2 module for ceiling fan 1200/1400 mm sweep 230 volts AC complete all as specified and directed
S&F ceiling rose, 3 terminal/PVC/polycarbonate, isolated body 250 V AC complete all as specified & directed. .
S&F lamp holder,pvc/polycarbonateinsulated body with back plate suitable for batten fittings including 9w/10 w LED lamp complete all as specified & directed.
S&F lamp holder,pvc/polycarbonateinsulated body with back plate suitable for batten fittings including 3w/5w LED lamp complete all as specified & directed.
M&L in replacement sub main wiring with 2 Single core PVC insulated unsheathed FRLS cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including 20 mm. dia or higher PVC conduit medium duty concealed, conduit heavy duty accessories and fittings. Insulated unsheathed FRLS cable copper conductor multistranded of size 6 Sq. mm. as earth wire upto common earth and connected to earth dolly in replacement, complete all as specified & directed . (Note: 3 runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length)
Alankar Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .