Supply, installation, testing and commissioning of 40 HP, 03- Phase Induction motor with allied accessories for lift irrigation scheme Delina Main.

Supply, Retrofitting, testing of 415 V, 03 phase, 50 Hz, 40HP, 06 pole induction motor as per IS 12615 for lift irrigation Scheme Specification of motor. 1. Type: Horizontal type foot mounted. 2. HP/KW 40/ 30 3. Volt 415 +10% 4. EFF IE2 5. RPM 960 (Sync) 6. Make: ABB/Kirloskar/Crompton & Greaves/ As approved under EOI of SE Mechanical Circle Kashmir I&FC Department. 7. Class of Insulation: F type 8. Winding Copper wound squirrel cage 9. Type of enclosure: TEFC The job includes Dismantling of existing motor with the help of skilled labour and shifting it to nearby safe location, all cost of material and labour, welding work for modification if any required for the fitment of the motor on existing base frame. The job Includes p/f of new rubber tyre coupling set of suitable size (01 No) and one for extra as spare at site.

Supply, installation, testing & commissioning of 35 sq mm XLPE insulated 1100V single core armored copper cable (Preferred make: Finolex/ Gloster/ Havells/ KEI/ Polycab) or equivalent make. The cable shall be thimbled at each end wherever required with reputed make with the help of skilled labour, hydraulic crippling tool, tape roll and other tools & tackles for the completion of the job.

FASD STARTER: Manufacturing, supply, installation, testing & commissioning of MN 65/Equivalent FASD starter for L.I.S Novla. The Starter shall be of following specifications and shall compromise of equipment’s detailed below: Specifications: a. Main contractor assembly having a range of 70 Amp of L&T/Havels/equivalent make b. Delta contractor assembly having a range of 70 Amp of L&T/Havels/equivalent make c. Star contractor assembly having a range of 35Amp of L&T/Havels/equivalent make d. Thermal overload relay of suitable capacity MN series of L&T/Equivalent make e. Motor protection relay of suitable capacity MN series of L&T/equivalent make f. Double timer assembly having a range of 0-60 second of L& T /ABB / Equivalent make as approved in EOI of SE mechanical circle Kashmir I&FC Department Srinagar. g. Single phase preventer of suitable capacity with selectable under & over voltage of L&T make h. Control MCB of suitable capacity amperes range. i. Electrolytic Aluminum bus bar strips of 125 Amp TPN & capacity duly tinned air insulated and mounted on suitable Bakelite insulation j. One number Digital voltmeter 0-500V & one no. Ammeter digital type along with 3 No. CT coils having range 0- 500A fitted in each bus bar of L&T make k. ON/OFF LED push button type RED & Green color of 5A-415V, 50HZ, L&T make Frequency Meter, C.T coils and other accessories as per requirement/Design should be included. l. Complete internal wiring of the control panel for operating equipment by using adequate capacity single core copper wire of Havells/polycab/equivalent make. The wiring shall be fitted with plastic washers for identification of each wire at various joints. Panel for housing of all the equipment fabricated out 16 MM gauge sheet metal of adequate size to house all the equipment with enough space to reach out to any equipment for repair/replacement. The panel shall have hinged door at the front with proper locking arrangements. The housing shall be provided with a base frame fabricated out of ISMC & welded /bolted at the bottom. The housing shall be provided with necessary cut out spaces for fitment of meters, push buttons actuator incoming & out coming connections. The panel shall be free standing, floor mounted, totally enclosed, vermin proof, spray enamel panted in two coats of conventional shade over a coat of red oxide primer both externally & internally. The panel shall have air vents for proper ventilation.

FASD STARTER: Manufacturing, supply, installation, testing & commissioning of MN 45/Equivalent FASD starter for L.I.S Novla. The Starter shall be of following specifications and shall compromise of equipment’s detailed below: Specifications: m. Main contractor assembly having a range of 50 Amp of L&T/Havels/equivalent make n. Delta contractor assembly having a range of 50 Amp of L&T/Havels/equivalent make o. Star contractor assembly having a range of 30Amp of L&T/Havels/equivalent make p. Thermal overload relay of suitable capacity MN series of L&T/Equivalent make q. Motor protection relay of suitable capacity MN series of L&T/equivalent make r. Double timer assembly having a range of 0-60 second of L& T /ABB / Equivalent make as approved in EOI of SE mechanical circle Kashmir I&FC Department Srinagar. s. Single phase preventer of suitable capacity with selectable under & over voltage of L&T make t. Control MCB of suitable capacity amperes range. u. Electrolytic Aluminum bus bar strips of 125 Amp TPN & capacity duly tinned air insulated and mounted on suitable Bakelite insulation v. One number Digital voltmeter 0-500V & one no. Ammeter digital type along with 3 No. CT coils having range 0- 500A fitted in each bus bar of L&T make w. ON/OFF LED push button type RED & Green color of 5A-415V, 50HZ, L&T make Frequency Meter, C.T coils and other accessories as per requirement/Design should be included. x. Complete internal wiring of the control panel for operating equipment by using adequate capacity single core copper wire of Havells/polycab/equivalent make. The wiring shall be fitted with plastic washers for identification of each wire at various joints. Panel for housing of all the equipment fabricated out 16 MM gauge sheet metal of adequate size to house all the equipment with enough space to reach out to any equipment for repair/replacement. The panel shall have hinged door at the front with proper locking arrangements. The housing shall be provided with a base frame fabricated out of ISMC & welded /bolted at the bottom. The housing shall be provided with necessary cut out spaces for fitment of meters, push buttons actuator incoming & out coming connections. The panel shall be free standing, floor mounted, totally enclosed, vermin proof, spray enamel panted in two coats of conventional shade over a coat of red oxide primer both externally & internally. The panel shall have air vents for proper ventilation.

Supply of heavy duty 5.5 meter / 18 feet compact and foldable telescopic ladder having load bearing capacity 150 kg of

Providing and fitting of 50-Watt LED outdoor pressure die cast aluminum IP65 roadway luminaire light with high power LED Min 3000 Lumen as light source of Havells/Crompton/Bajaj/Equivalent make with switches and other allied accessories.

Providing and fitting of 1 sq mm PVC insulated flexible copper cable (FRLS) for electrical installation of lightening items of Havells/Anchor/Bajaj/Equivalent make

Providing of blanket of ultra-soft and cozy single bed for workers deputed at site for watch & ward during night hours.