Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAdmitted-Finance VILLAGE P O DHALIARA TEHSIL DEHRA DISTT KANGRA H P | MANDI | HIMACHAL PRADESH | 175013 | ₹3.2 L | L1 | Admitted-Finance |
| 2 | L2₹3.2 L+₹9,227.95 (2.92%)Admitted-Finance | ₹3.2 L+₹9,227.95 (2.92%) | L2 | Admitted-Finance |
| 3 | L3₹3.5 L+₹29,606.66 (9.38%)Admitted-Finance | ₹3.5 L+₹29,606.66 (9.38%) | L3 | Admitted-Finance |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | Shivani Thakur L2 | Ishan Sharma L1 | Chitar Singh L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: - | 73.59 | cum | 430 ₹31,643.7 | 425 ₹31,275.75 | 399 ₹29,362.41 Lowest |
| 2.00DISMENTALLING OF BELOW MENTIONED MSERW PIPE INCLUDING ALL TYPES OF FITTING SUCH AS BENDS, TEES, AIR VALVES ETC. (EARTHWORK IN TRENCHES TO BE MEASURED & PAID FOR SEPARATELY) ALL COMPLETE AS SPECIFIED & DIRECTED BY THE ENGINEER-IN-CHARGE. | ||||||
| 2.01 | 300 mm dia | 18 | Rmt. | 280 ₹5,040 | 260 ₹4,680 Lowest | 400 ₹7,200 |
| 2.02 | 350mm Dia | 40 | Rmt. | 370 ₹14,800 | 340 ₹13,600 Lowest | 400 ₹16,000 |
| 3.00Relaying of Butt welding, laying and testing to levelled grades, IS marked Galvanised MSERW Pipes beveled ended of following dia mtr. / specifications confirming ISO:3183 ( with upto date amendments ) of steel grades X- 70, X-65, X-60, X-52,X-46 , X-42 , Grade-A and B jointing the pipes with butt welding at both end according to relevant BIS standards / approved specifications including manufacturing reducers/ tapers all short pieces , and bends as per site requirements and made from parent tubes ( to be measured and paid along with pipes ). Bends shall be manufactured in such a way that not more than 11-1/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in -charge. The pipes and specials shall have in factory galvanized coating as per IS :4739 ( with latest amendments ) . The damaged portion of galvanization due to welding shall be provided with anticorrosive treatment by applying two coats of bituminous paint over priming coat as per AWWA specification C-203-1978 ( Earth work to be measured & paid for separately) | ||||||
| 3.01 | 300 mm dia | 18 | Rmt. | 460 ₹8,280 | 450 ₹8,100 | 400 ₹7,200 Lowest |
| 3.02 | 350mm Dia | 40 | Rmt. | 520 ₹20,800 | 500 ₹20,000 | 400 ₹16,000 Lowest |
| 4.00Providing and Fixing Cast Steel Non Return Valve (BS:5312) of dia mentioned below class PN-1.00 with Flange Table - 17 conforming to IS-9001-2000 or latest with upto date ammendments of Leader / Kirloskar / Kilburn/ Kartar make including cost of welding of companion flanges, nut & bolts, rubber insertions washers (gasket) etc. as per specifications complete in all respect in all leads and lifts and to the entire satisfaction of Engineer - in - Charge. | ||||||
| 4.01 | 300 mm dia | 1 | Each | 82,000 ₹82,000 | 81,000 ₹81,000 Lowest | 1,10,000 ₹1,10,000 |
| 4.02 | 350mm Dia | 1 | Each | 1,35,020 ₹1,35,020 | 1,30,500 ₹1,30,500 Lowest | 1,35,000 ₹1,35,000 |
Tender Value
₹3.0 L
EMD Value
₹6,074
Closing Date
27 Apr 2026, 11:00 amClosed
EE Jal Shakti Division Larji
EE Jal Shakti Division Larji
(SH- Excavation ,Dismantling,relaying,spot welding and cast Steel Non return Valves at stage 3rd pump house Near Diyar)
2026_HPIPH_134735_5
EE Larji NIT NO-1352-4151 dated 20.04.2026
Open Tender
Civil Works
Item Rate
60 days
Bajaura
Please refer Tender documents.
2 documents required · 2 mandatory
₹350
EE Jal Shakti Division Larji
₹6,074
21 Jul 2026
20 Apr 2026
27 Apr 2026
20 Apr 2026
27 Apr 2026
20 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work with in all leads and lifts as per the entire satisfaction & direction of the Engineer - in - Charge. in: - | |||||
| 2DISMENTALLING OF BELOW MENTIONED MSERW PIPE INCLUDING ALL TYPES OF FITTING SUCH AS BENDS, TEES, AIR VALVES ETC. (EARTHWORK IN TRENCHES TO BE MEASURED & PAID FOR SEPARATELY) ALL COMPLETE AS SPECIFIED & DIRECTED BY THE ENGINEER-IN-CHARGE. | |||||
| 2.01 | 300 mm dia | - | Rmt. | - | - |
| 2.02 | 350mm Dia | - | Rmt. | - | - |
| 3Relaying of Butt welding, laying and testing to levelled grades, IS marked Galvanised MSERW Pipes beveled ended of following dia mtr. / specifications confirming ISO:3183 ( with upto date amendments ) of steel grades X- 70, X-65, X-60, X-52,X-46 , X-42 , Grade-A and B jointing the pipes with butt welding at both end according to relevant BIS standards / approved specifications including manufacturing reducers/ tapers all short pieces , and bends as per site requirements and made from parent tubes ( to be measured and paid along with pipes ). Bends shall be manufactured in such a way that not more than 11-1/4 degree deflection is caused by a single cut and internal dia is not reduced including hydraulic testing to the entire satisfaction of Engineer-in -charge. The pipes and specials shall have in factory galvanized coating as per IS :4739 ( with latest amendments ) . The damaged portion of galvanization due to welding shall be provided with anticorrosive treatment by applying two coats of bituminous paint over priming coat as per AWWA specification C-203-1978 ( Earth work to be measured & paid for separately) | |||||
| 3.01 | 300 mm dia | - | Rmt. | - | - |
| 3.02 | 350mm Dia | - | Rmt. | - | - |
| 4Providing and Fixing Cast Steel Non Return Valve (BS:5312) of dia mentioned below class PN-1.00 with Flange Table - 17 conforming to IS-9001-2000 or latest with upto date ammendments of Leader / Kirloskar / Kilburn/ Kartar make including cost of welding of companion flanges, nut & bolts, rubber insertions washers (gasket) etc. as per specifications complete in all respect in all leads and lifts and to the entire satisfaction of Engineer - in - Charge. | |||||
| 4.01 | 300 mm dia | - | Each | - | - |
| 4.02 | 350mm Dia | - | Each | - | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.53 MB
Form8.pdf
Tender Documents • 1.43 MB
Terms.pdf
Tender Documents • 0.27 MB
BOQ_199410.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .