Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.6 LAdmitted-Finance B2 SECOND FLOOR EMPERIAL PLUS COMPLEX OPP SAIBABA TEMPLE ZANZARDA ROAD JUNAGADH JUNAGADH GUJARAT 362001 | JUNAGADH | GUJARAT | 362001 | ₹56.6 L | L1 | Admitted-Finance |
| 2 | L2₹60.5 L+₹3.8 L (6.78%)Admitted-Finance | ₹60.5 L+₹3.8 L (6.78%) | L2 | Admitted-Finance |
| 3 | L3₹61.5 L+₹4.8 L (8.56%)Admitted-Finance | ₹61.5 L+₹4.8 L (8.56%) | L3 | Admitted-Finance |
| 4 | L4₹66.9 L+₹10.3 L (18.1%)Admitted-Finance | ₹66.9 L+₹10.3 L (18.1%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s H A ENTERPRISES L2 | THERMOTECH ENTERPRISES L4 | ASSOCIATED ENGINEERS L3 | AMAN AND CO L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Multi stage centrifugal pump coupled with 3-phase Squirrel Cage Induction Motor:
Design, supply, installation, testing and commissioning of multistage horizontal centrifugal pump along with motor and allied accessories:
Pump Material of Construction: Casing – Cast Iron IS 210 Grade FG 260
Impeller – SS ASTM A 351/M CF8M Shaft – SS ASTM A 276 Type 410
Shaft Sleeve – SS ASTM A 276 Type 410 (Hardened)
Motor Specification:
3 - Phase TEFC Squirrel Cage Induction Motors with Enclosure conforming to protection IP 55, continuously rated (S1) suitable for operation on 415+/- 10% V, 50Hz+/- 5% AC supply with ambient 50ºC, Class "F" insulation with temperature rise limited to Class "B". Performance Efficiency/ Parameters shall be in accordance with IE-2 values conforming to IS 12615:2011 or IEC 60034-30-1-2014.
Pump Performance:, Service: Irrigation, Source: River Water, Rated Discharge = 30 LPS
Total Dynamic Head = 265 meter, NPSH (A) = 3.0 meter, Efficiency at duty point =70%
Speed = upto 1500 RPM (Synchronous), Motor Rating (max) =…. To be quoted by bidder
Selected motor rating shall be higher than following:
i. 125% of pump input at duty point
ii. Maximum power consumed by the pump in the entire operating range. Operating range may be considered from 110% to 85% of rated head.
Altitude of installation: Kargil, 2676m (deration on account of altitude shall be taken careof while designing)
The job includes parallel combination of two pump sets. Each pump set shall be fitted with control valves having suitable pressure rating; Cast Iron Non Return Valve (NRV) and Sluice Valves, ERW MS Suction 15 meters and Delivery 5 meters pipe with long radius 90o bends and foot valves with strainer, clips, clamps and nipples.
Delivery pipes of each pump shall be fitted to common pressure header. Provision shall be provided for priming facility using 25 mm heavy duty ball valves 25 mm ERW/ MS Pipe with each pump and etc.
The sizes / quantities of the control valves and suction delivery pipe and other accessories shall be in accordance with the capacity of the pump and site condition. | 2 | SETS | 14,25,000 ₹28,50,000 Lowest | 16,80,000 ₹33,60,000 | 17,00,000 ₹34,00,000 | 15,00,000 ₹30,00,000 |
| 2.00 | Control panel with one Incomer and two out goings for two pump sets in parallel Operation. (One running and the other standby and vice versa) with Star-Delta Starter for each pump sets of Item-A( conforming to IS/IEC 60947-4-1)
Design, fabrication, assembling, wiring, Installation testing and commissioning fixed type, floor mounted, cubical design motor control centre fabricated out of 2mm/14 SWG CRCA thick sheet duly painted, suitable for indoor use, internally wired complete with Aluminum bus bar covered with PVC heat shrinkable sleeves, colour coded. The panel shall be complete with all protections in-built (Over load/PTC/Line fault / Voltage imbalance / Phase reversal / Under voltage / Over voltage / Over temperature / Open Gate / Excessive Starts per Hr, Single phasing), Main incoming MDO ACB with short circuit release including earth fault and under voltage protection. Bus bar, metering ( incoming and outgoing Voltmeter, Ampere meter, Frequency meter) (3-phase current/3-phase voltage/power factor of running motor, phase indication lamp (RYB with CTs), outgoing MCCB for each pump sets, capacitor Bank for an improved power factor of .95 to 1.
Job includes single core copper cable 50 RMT confirming to IS 694 with thimbles from panel to AVR, Automatic Voltage Regulator to Panel and Panel to Motor having option for 3-wire and 6-wire connections, and 3 ½ core aluminium cable of 50 RMT of current rating 500amp from L.T. Pole to control panel /AVR
The 3-phase squirrel cage induction Motors ratings are as follows.
i) Rating= 225 HP (approx) /suitable for designed motor rating of pump
sets of item -A
ii) Voltage 415± 10% | 1 | Job | 11,00,000 ₹11,00,000 | 9,82,000 ₹9,82,000 | 9,70,000 ₹9,70,000 Lowest | 12,00,000 ₹12,00,000 |
| 3.00 | Maintenance free earthling:-
S.I.T.C. of ALLTEC make long life maintenance free electrolytic earthling system with 10 feet vertical k type copper not less then 2”(50.8mm)ID and not less than 0.08”(2.03mm) wall thickness ,which does not require manual addition of water .The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to with hold temperature of 7000C.The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable. | 3 | Job | 38,333 ₹1,14,999 | 72,000 ₹2,16,000 | 30,000 ₹90,000 | 25,000 ₹75,000 Lowest |
| 4.00 | FULLY AUTOMATIC VOLTAGE REGULATOR
SITC of fully automatic servo voltage stabilizer duly filled with recommended oil upto full capacity:
Type = Fully Automatic Servo Voltage Regulator
Rating = 630 Kva
Input Voltage Range (Phase To Phase) =270-460 V
Output Voltage Range (Phase To Phase) =415±1%
Output Wave Form = True To Input
Input Frequency = 45-55 Hz
Response Time = 10 Msec
Correction Speed = 25-65 V/Sec
Correction Method = Stopless Correction
Cooling = Oil
Efficiency = Better Than 98%
Control Circuit= Fully Automatic Ic Based Solid Stat,
Operation = Fully Automatic
Suitability = Suitable For 3-Phase
Unbalanced Supply Unbalanced Load
Operating Temperature = -15oc To 45oc Above Ambient
Additional Features =
I)High And Low Voltage Cutoff System. Ii)Over Load And Short Circuit Protection
Iii) Single Phase Prevention System. Iv) Phase Sequence Change Protection.
v) Earth fault protection. vi) High grade CRGO lamination.
vii) Simple rugged construction. viii) 99.9% pure copper.
ix) High efficiency. x) Negligible wave form and power factor distortion.
xi) Smooth and step less voltage control. | 1 | No | 12,00,000 ₹12,00,000 Lowest | 16,85,000 ₹16,85,000 | 13,50,000 ₹13,50,000 | 12,00,000 ₹12,00,000 Lowest |
| 5.00 | Complete Pump Tool Kit
Crimping Tool Hydraulic Type = 1 No
Spanner double ended set = 1 set
Ring spanner set = 1 set
Screw driver = 1 set
Socket = 1 set
Grease Gun Bucket type = 1 No | 1 | Job | 1,80,000 ₹1,80,000 | 62,500 ₹62,500 | 50,000 ₹50,000 | 20,000 ₹20,000 Lowest |
| 6.00 | Foundation Block:
Construction of RCC foundation block each pump-set (as per OEM guidelines) and PCC foundation control panel of using (1:2:4) mix . Job includes cost of material, labour, shuttering, tools and tackles etc complete.
Block size:
The length and breadth of the foundation 300mm more from the respective length and breadth of the respective equipments. The height of the foundation block shall be 400mm i.e 200 mm below and 200mm above ground level fully embedded with ground flooring. | 1 | Job | 3,04,000 ₹3,04,000 | 68,186 ₹68,186 Lowest | 90,000 ₹90,000 | 70,000 ₹70,000 |
| 7.00 | Gantry Crane:
Supply installation testing and commissioning of , portable, manually operated, single girder , gantry crane for indoor use for lifting and lowering of pumps of following specifications, confirming to IS 807/ 2006 & IS-3177/ 1999 a:
1. Capacity : 3.00 ton
2. Type: Single Girder (of ISMB Girder of recommended size)
3. Max Height: upto 12 Ft.
4. Span: 6 feet (Aprox) | 1 | No | 3,00,000 ₹3,00,000 | 3,19,100 ₹3,19,100 | 2,00,000 ₹2,00,000 | 1,00,000 ₹1,00,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.2 L
Closing Date
27 Jun 2022, 2:00 pmClosed
Executive Engineer Mech Div Kargil
Office of Executive Engineer Mech Div Kargil
Design, Supply, Testing and Commissioning of Multi stage Split case/Centrifugal Pump coupled with squirrel cage Induction motor along with allied accessories for Lift Irrigation Scheme Kaksar
2022_PWD_6662_2
MDK/E-NIT/11 OF 2022-23
Open Tender
Pumps/Motors
Turn-key
90 days
LIS Kaksar
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
EXECUTIVE ENGINEER MECHANICAL DIVISION KARGIL
₹1.2 L
Office of Executive Engineer Mech Div Kargil
20 Jul 2022
11 Jun 2022
28 Jun 2022
11 Jun 2022
27 Jun 2022
11 Jun 2022
13 Jun 2022
Amount
Control panel with one Incomer and two out goings for two pump sets in parallel Operation. (One running and the other standby and vice versa) with Star-Delta Starter for each pump sets of Item-A( conforming to IS/IEC 60947-4-1) Design, fabrication, assembling, wiring, Installation testing and commissioning fixed type, floor mounted, cubical design motor control centre fabricated out of 2mm/14 SWG CRCA thick sheet duly painted, suitable for indoor use, internally wired complete with Aluminum bus bar covered with PVC heat shrinkable sleeves, colour coded. The panel shall be complete with all protections in-built (Over load/PTC/Line fault / Voltage imbalance / Phase reversal / Under voltage / Over voltage / Over temperature / Open Gate / Excessive Starts per Hr, Single phasing), Main incoming MDO ACB with short circuit release including earth fault and under voltage protection. Bus bar, metering ( incoming and outgoing Voltmeter, Ampere meter, Frequency meter) (3-phase current/3-phase voltage/power factor of running motor, phase indication lamp (RYB with CTs), outgoing MCCB for each pump sets, capacitor Bank for an improved power factor of .95 to 1. Job includes single core copper cable 50 RMT confirming to IS 694 with thimbles from panel to AVR, Automatic Voltage Regulator to Panel and Panel to Motor having option for 3-wire and 6-wire connections, and 3 ½ core aluminium cable of 50 RMT of current rating 500amp from L.T. Pole to control panel /AVR The 3-phase squirrel cage induction Motors ratings are as follows. i) Rating= 225 HP (approx) /suitable for designed motor rating of pump sets of item -A ii) Voltage 415± 10%
Maintenance free earthling:- S.I.T.C. of ALLTEC make long life maintenance free electrolytic earthling system with 10 feet vertical k type copper not less then 2”(50.8mm)ID and not less than 0.08”(2.03mm) wall thickness ,which does not require manual addition of water .The system should be corrosion resistant pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to with hold temperature of 7000C.The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable.
FULLY AUTOMATIC VOLTAGE REGULATOR SITC of fully automatic servo voltage stabilizer duly filled with recommended oil upto full capacity: Type = Fully Automatic Servo Voltage Regulator Rating = 630 Kva Input Voltage Range (Phase To Phase) =270-460 V Output Voltage Range (Phase To Phase) =415±1% Output Wave Form = True To Input Input Frequency = 45-55 Hz Response Time = 10 Msec Correction Speed = 25-65 V/Sec Correction Method = Stopless Correction Cooling = Oil Efficiency = Better Than 98% Control Circuit= Fully Automatic Ic Based Solid Stat, Operation = Fully Automatic Suitability = Suitable For 3-Phase Unbalanced Supply Unbalanced Load Operating Temperature = -15oc To 45oc Above Ambient Additional Features = I)High And Low Voltage Cutoff System. Ii)Over Load And Short Circuit Protection Iii) Single Phase Prevention System. Iv) Phase Sequence Change Protection. v) Earth fault protection. vi) High grade CRGO lamination. vii) Simple rugged construction. viii) 99.9% pure copper. ix) High efficiency. x) Negligible wave form and power factor distortion. xi) Smooth and step less voltage control.
Complete Pump Tool Kit Crimping Tool Hydraulic Type = 1 No Spanner double ended set = 1 set Ring spanner set = 1 set Screw driver = 1 set Socket = 1 set Grease Gun Bucket type = 1 No
Foundation Block: Construction of RCC foundation block each pump-set (as per OEM guidelines) and PCC foundation control panel of using (1:2:4) mix . Job includes cost of material, labour, shuttering, tools and tackles etc complete. Block size: The length and breadth of the foundation 300mm more from the respective length and breadth of the respective equipments. The height of the foundation block shall be 400mm i.e 200 mm below and 200mm above ground level fully embedded with ground flooring.
Gantry Crane: Supply installation testing and commissioning of , portable, manually operated, single girder , gantry crane for indoor use for lifting and lowering of pumps of following specifications, confirming to IS 807/ 2006 & IS-3177/ 1999 a: 1. Capacity : 3.00 ton 2. Type: Single Girder (of ISMB Girder of recommended size) 3. Max Height: upto 12 Ft. 4. Span: 6 feet (Aprox)
M/s H A ENTERPRISES
ASSOCIATED ENGINEERS
THERMOTECH ENTERPRISES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .