REPAIRING OF MANTUR DHAM AWC SL NO-22 (AWC CODE-19329080219) UNDER UTTAR BARA HALDIBARI G.P. WITHIN HALDIBARI DEV. BLOCK DIST - COOCH BEHAR.

Labour for Chipping of concrete surface before taking up Plastering work.

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (i) With 6:1 cement mortar, (c) 15 mm. thick plaster

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification.

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface.

a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. On Steel Surface.

Painting with best quality synthetic enamel paint of approved make including & smooth finishing surfaces thoroughly… two coats..With super gloss (hi-gloss) -On Steel Surface.

Iron butt hinges of approved quality fitted and fixed complete.(iii) 75mm. X 40mm. X 1.12mm.

Supplying anodised aluminium catch hook with eye fitted and fixed to shutter and chowkat complete of best quality :(ii) 225mm long.

Anodised aluminium barrel/ tower/ socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(ii) 75mm long x 10mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod)(i) 75 mm grip x 10 mm dia rod.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161- 1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816- 1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete Span Upto 12m

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)

ADD GST 18%

ADD CESS 1%

Please Enable Macros to View BoQ information