Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
15 Jun 2026, 11:00 amClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
RDSO
Yes
90 days
Expenditure
General
LP
3 conditions · 2 needing a document upload
Tendered item is reserved for procurement from RDSO approved sources for Sub Item ID: 3100249002. Approval status shall be reckoned as on the date of tender closing and not thereafter, unless it is a case of removal/suspension /banning. Minimum 80% of the net procurable qty. shall be ordered on the vendors appearing as Approved vendor in RDSO vendor directory. Vendors appearing as Developmental vendor in RDSO vendor directory will be considered up to a maximum of 20% of NPQ. However, this is subject to a condition that rates of developmental vendors are lower than the rates of vendors eligible for regular orders. If the work address indicated in the offer is different from what is indicated in the approval certificate issued by the respective vendor approval agency, then such offer will be treated as if the same has been received from unapproved source.
Procurement from (OEMs) manufacturers or authorized agent/dealer: 2.0 Either OEM should quote directly or OEM can authorize and give Tender Specific Authorization to its Agent / dealer to quote on their behalf. 2.1 The authorized dealer should submit valid tender specific authorization, along with the offer, failing which their offer will be liable to be passed over. 2.2 Trader / Authorized dealer should mention name of Manufacturer along with complete address for inspection of material at OEM Premises in line with Instructions to Tenderers and General Conditions of Contract VERSION 2024 or latest with all revisions and corrigendums issued before tender closing
SUPPLY,GRADE,THREAD,QUALITY,MAKE OF SET OF FASTENERS SHOULD BE DELIEVERD AS PER ATTACHED ANNEXURE AND AS PER RESPECTIVE DRAWING NO./SPECIFICATION - RDSO CG - 15067, RDSO CG - 15071, RDSO CG 15070, IS : 1364-2002, PT -I, IS : 1367- 2002,PT-3,10.9,CE,MDTS-057 ALSO MENTIONED IN RDSO TECHNICAL SPECIFICATION & STANDARD LIST OF RDSO.
22 conditions
LIQUIDATED DAMAGE (LD) ON DELAYED SUPPLY: For delayed supplies, Recovery of Liquidated Damage (LD) shall be levied @1/2% (half percent) of the price of the store per week or part of the week during which delivery is accepted and the upper limit for recovery of LD in supply contracts is 10%(ten percent) of the valu of contract irrespective of delays, unless otherwise provided, specifically in the contract.
Offer validity shall be 90 days from the date of opening of the tenders otherwise offer will be summarily rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
RAILWAY RESERVES THE RIGHT TO PLACE BULK / REGULAR ORDER ON HAVING SATISFACTORY PERFORMANCE OF SAME ITEMS.
1 location across Gujarat
HEX HEAD BOLT M16X90 HIGH TENSILE
54265189A
54265189A
Limited - Indigenous
Goods
Surat, Gujarat
₹0
Exempted
15 Jun 2026
24 May 2026
Description :HEX HEAD BOLT M16X90 HIGH TENSILE as per IS:1364(PART-1)-2002,CE-WITH PROPERTY CLASS-10.9 TO IS:1367(PART-3)-2002, COATING AS PE R MDTS-057 as per Drg.No. IS:1364 -2002,PT-1, IS:1367-2002 PT-3,10.9,CE, MDTS- specn: IS:1364-2002,PT-1, IS:1367-2002PT-3,10.9,CE, MDTS-057, SUITABLE TO LHB'S BOGIE FASTENING. GRADE - 10.9, MAKE: POOJA FORGE/STERLING/DFL/HEM/SHILPA STEEL/SOVENIER/UNIVERSAL/VARDHMAN. GRADE - 10.9, THREAD - HALF THREAD. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE(C & W ) UDHNA, WR Gujarat 200.00 Numbers UVAM Item ref. ( Item Id :- 3100249 - Assembly and components of CTRB for use on freight stock , Sub Item Id:-3100249002 - Axle end steel high tensile cap screws 1"? 8 UNC-2A, 2?" thread length )
Description :HEX HEAD BOLT M16X70,IS:1364-2002,PT-I,IS:1367-2002,PT-3, 10.9,CE,MDTS-057 Make: POOJA FORGE/STERLING/DFL/HEM/SHILPA STEEL/SOVE NIER/UNIVERSAL/VARDHMAN. BOLT AS PER DRG. NO. /SPECIFICATION - IS:1364- 2002,PT-I,IS:1367-2002,PT-3, 10.9,CE,MDTS-057 ATTACHED IN ANNEXURE A. GRADE - 10.9, THREAD- HALF THREAD SUITABLE TO LHB'S BOGIE [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE(C & W ) UDHNA, WR Gujarat 200.00 Numbers UVAM Item ref. ( Item Id :- 3100249 - Assembly and components of CTRB for use on freight stock , Sub Item Id:-3100249002 - Axle end steel high tensile cap screws 1"? 8 UNC-2A, 2?" thread length )
Description :HEXAGON HEAD BOLT M8 X 35 - 10.9 TO DRG NO -RDSO CG-15071. MAKE.:- TVS/UNBRAKO/TUFF/DFL. SUPPLY,GRADE,THREAD SHOULD BE AS P ER DRAWING NO./SPECIFICATION ATTACHED AS ANNEXURE B. GRADE - 10.9. SUPPLY,GRADE,THREAD SHOULD BE AS PER DRAWING NO./SPECIFICATION ATTA CHED AS ANNEXURE B. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE(C & W ) UDHNA, WR Gujarat 300.00 Numbers UVAM Item ref. ( Item Id :- 3100249 - Assembly and components of CTRB for use on freight stock , Sub Item Id:-3100249002 - Axle end steel high tensile cap screws 1"? 8 UNC-2A, 2?" thread length )
Description :SUPPLY OF SET OF FASTENER Hex Head Screw for CTRB M20X60 (LHB shell with flat bogies) Drawing No.:- CG- 15067 Alt 1 or latest. Make.:-TVS /UNBRAKO/TUFF/DFL. SUPPLY,GRADE,THREAD SHOULD BE AS PER DRAWING NO./SPECIFICATION ATTACHED AS ANNEXURE B. AS PER RDSO DRAWING NO.- C G- 15067 OR LATEST. GRADE -8.8,SUITABLE TO LHB FASTENING. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE(C & W ) UDHNA, WR Gujarat 200.00 Numbers UVAM Item ref. ( Item Id :- 3100249 - Assembly and components of CTRB for use on freight stock , Sub Item Id:-3100249002 - Axle end steel high tensile cap screws 1"? 8 UNC-2A, 2?" thread length )
Description :HIGH TENSILE HEXAGONAL HEAD BOLT ( HALF THREAD) OF SIZE M16X45 MM, Specification : IS : 1364-2002, PT -I, IS : 1367-2002,PT-3,10.9,CE, MDTS-057 ,Supply Condition : IS-1367/2002, Grade : 10.9, ACCEPTED MAKE: POOJA FORGE/STERLING/DFL/HEM/SHILPA STEEL/SOVENIER/UNIVERSAL/VARDHMAN. SUITABLE TO LHB'S BOGIE & AS PER DRG. NO/SPECIFICATION ATTACHED AS ANNEXURE B ,GRADE -10.9. SUPPLY, G RADE,THREAD,QUALITY AS PER RDSO SPECIFICATION - IS : 1364-2002, PT -I, IS : 1367-2002,PT-3,10.9,CE,MDTS-057. [ Warranty Period: 30 Months after the date of delivery ] ] Consignee SSE(C & W ) UDHNA, WR Gujarat 200.00 Numbers UVAM Item ref. ( Item Id :- 3100249 - Assembly and components of CTRB for use on freight stock , Sub Item Id:-3100249002 - Axle end steel high tensile cap screws 1"? 8 UNC-2A, 2?" thread length )
Description :Hex head bolt of size M8x30, property class 10.9 confirming to DRG. NO. - RDSO CG -15070, IS1364part II with flat washer suitable for M8 confir ming to IS 2016 & M8 spring washer type-B confirming to IS3063 SUITABLE TO EARTHING DEVICE OF CTRB. Make: TVS/UNBRAKO/TUFF/DFL only. SUPPLY,GRA DE,THREAD SHOULD BE AS PER DRAWING NO. - RDSO CG 15070/SPECIFICATION ATTACHED AS PER ANNEXURE B. [ Warranty Period: 30 Months after the d ate of delivery ] ] Consignee SSE(C & W ) UDHNA, WR Gujarat 300.00 Numbers UVAM Item ref. ( Item Id :- 3100249 - Assembly and components of CTRB for use on freight stock , Sub Item Id:-3100249002 - Axle end steel high tensile cap screws 1"? 8 UNC-2A, 2?" thread length )
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
INDIANRAILWAYSTECHNICALSPECIFICATIONFORFASTENERS_compressed.pdf INDIANRAILWAYSTECHNICALSPECIFICATIONFORFASTENERS_c
ATTACHMENT
REQUIREMENTSHEETANNEXUREA.pdf
ATTACHMENT
RDSOSTANDARDLISTFORFASTENERS.pdf
ATTACHMENT
INDIANRAILWAYSSTANDARDFASTENERBOOKINLHBCOACH.pdf
ATTACHMENT
INDIANRAILWAYSTECHNICALSPECIFICATIONFORFASTENERS_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .