GE P/DDN/T-40 OF 23-24

Amount

Surface excavation n exc. 30cm deep and averaging 15cm deep and getting out in soft loose soil complete all as specified and directed.

Excavating in trenches, n. exc 1.5 m wide and n.exc. 1.5 m in depth for foundation etc in shafts, wells, cesspits, manholes pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers n.exc 25 cm thick in soil complete all as specified and directed.

Removing excavated material (soil) n.exc 50 mtr and depositing where directed at a alevel not exc 1.50 m above the starting point complete all as specified and directed

M&L for hardcore of broken stone broken or boulders n exc. 63mm deposited spread and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stove aggregate) as in path/plinth protection finish even & smooth without using extra cement all as specified and directed

M & L PCC 1:4:8 type D-2(using 40 mm graded stone aggregate) as in fdn, filling amnd mass concrete all as specified and directed

M&L for brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan & exc 6 m mean radius with old size bricks, complete all as specified and directed

M&L for 15mm thick rendering on other than fair faces of brick/ concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed

M&L for 75 mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregates) as in sub base Completely all as specified and directed.

M&L sand as floors/filling floor, etc including watering and consolidation all as specified and directed

M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade complete all as specified and directed.

M&L Rough finished flat form work to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundations and plinth beams, and similar work, vertical or to batter finished rough complete all as specified and directed

M&L Rough finished form work squar, rectangular or polygonal to sides of pillars, posts, struts, piers, columns and stanchions finished rough surface of concrete square, rectangular or polygonal and directed.

M&L Rough finished surface, flat formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.

M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone agg) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone agg) as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed.

M&L for RCC (nominal mix) type B1 1:2:4 (using 20mm graded stone agg) as in Columns,pillars,pier,post and struts all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement to concrete complete all as specified and directed.

M&L for TMT bars 5mm dia and over to and including 10mm dia stirrups spacers and binders cut to length bent to shape reqd including cranking, bending spirally for hooping for columns, hooking ends and binding with incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement to concrete all as specified and directed.

S&F Rolled mild steel Fe-410-W(Gde-E-250) quality-B in joist,channel,angle or tee sections fixed independently without connecting plates etc (cut to ordinary length i.e within 20 mm of the length indicated as directed complete all as specified and as directed

S&F Roof trusses (framed), trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Pre- painted galvalumealuminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified complete all as specified and directed

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified incl dismantling existing sheet complete all as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, Fe-410-W(Gde-E-250) quality-B etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete including cutting out of existing sheet if required complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

M&L for preparing new plastered or unplastered wall surfaces and applying two coat of Liquid Acrylic exterior emulsion Paint (Apex) over a one coat of primer complete as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified & directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint with red oxide zinc chrome etc complete all as specified and as directed

Demolition of brickwork or stone boulder masonry, built in cement mortor or cement lime mortar including all quoins arches ,pillars etc complete all as specified.

Dismantling of plain or corrugated, steel sheet any gauge thickness including nainital or similar patern roof covering etc complete all as specified and as directed.

Demolition of cement concrete (Unreinforced) ground floor exc 15 cm thickness at any situation complete all as specified and directed

Dismantling frame timber scantlings 40 sq cm and over in section, any position all as specified and directed

Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqcm each (without talking off shutters from the frame) complete all as specified and directed.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below normal ground level connected to galvanized strip 32 x 6 mm by means of nuts, bolts, check nuts, washers of galvanized iron or steel all as shown in electrical plate No. 03 of SSR Part I connected to earthing test point including excavation/ earth work in any type of strata, removal of surplus excavated material, GI pipe for watering and funnel, PCC 1:3:6 type C1 using 40mm graded stone aggregate chamber including necessary formwork / mould for fair and even surfaces, precast RCC 1:2:4 type B0 using 12.5mm graded stone aggregate chamber cover slab, GI funnel, with GI watering pipe 20 mm dia medium grade, wire mesh, protection pipe 40 mm dia GI pipe light grade for earth lead up to 7.50 meter long including testing salt, charcoal complete all as specified and directed.

Supply and fixing of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25 x3.15 mm aluminum strip with saddles / insulators at 50cm distance, complete all as specified and directed.

M&L Test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm, drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws, complete all as specified and as directed.

M&L for Air termination, single pointed aluminum rod 12mm dia and 300mm long, complete including fixing arrangement such as PCC 1:3:6 type C1 of size 150x150x200mm for holding 0.60m long GI pipe 40mm bore, light grade, including provision of the same, flat iron clamps 25x6mm, MS collars, bolts, nuts, washers and MS plates, complete all as specified and directed.

Supply and laying GI tubing light grade for protecting the GI strip in tranches,floors,on poles, in walls complete all as specified and as directed size of 40 mm bore complete all as specified and directed.

S&F Ceiling mounted stand alone suppression system It has an in-built detection device that self detects and auto extinguishes fire without any human intervention. ISI marked, PESO approved PED BSI tested. Fixed on ceiling using suitable mounting accessories complete as specified and directed. Make - Ceasefire Cf000018 or equivalent in Exflame / Newtech •Agent: MAP 90• Fights class A, B, C and electrically started fires • Automatic Discharge Mechanism • State-of-the-art Pressure Gauge •Net mass : 10 kg (Cover 28Sqm Area) •Gross weight ; 14.90 kg •Valve/Cap construction : Forging and machining •Working pressure : 15 Bar •Dia of shell (OD) : 300 mm •Operating temp : -30 to +60 Degree celcious •Cylinder material : Steel CR2 (DC01) of 2.00 mm thick • 6 years warranty.

S&F ABC Powder-based Mono Ammonium Phosphate paired with a simple, controllable discharge of capacity 9.0 kg and rating confirming to IS: 15683 with extruded aluminum can having spray painted exterior, discharge EPDM hose pipe & horn, pressure gauge, carrying handle, controllable discharge mechanism etc on wall surface using suitable mounting accessories complete all as specified and directed. Make - Life Guard LG-129/Ceasefire CF-000725 or equivalent in Exflame.

S&F CO2 based portable fire extinguisher of capacity 5.00 Kg, ISI marked/PESO approved ABC type with Used/ Unused Mechanism (Wheeled Trolley) and rating confirming to IS: 15683 with extruded aluminum can having spray painted exterior, discharge EPDM hose pipe & horn, pressure gauge, carrying handle, controllable discharge mechanism etc fixed on wall or surface using suitable mounting accessories complete all as specified and directed. Make - Lifeguard LG-134AL/ Ceasefire CF-000701 or equivalent in Exflame

S&F for 4 Nos of 9.5 Litre capacity buckets as per IS 2546:1974 along with fire bucket stand equipped with canopy for suitable for mounting 4 nos of bucket on MS angle iron frame, hanging brackets, filling with sand duly painted in post office red colour, with ‘FIRE’ stencil lettering in white paint, fixing on ground in cement concrete etc complete all as specified and directed. Make Life Guard- LG-525P for bucket, LG-525A for stand and canopy.

Fire Hook with bamboo

Fire Beater with bamboo

HARJINDER PAL SINGH

PAWAN KUMAR

J P CONSTRUCTION

G M CONSTRUCTION COMPANY