Providing Fire Fighting system in RVDA Hospital Thrissur under District Panchayth Thrissur

Amount

Part-I- SITC of Fire Fighting System

MAIN PUMP

Supplying, Installation, Testing and Commissioning of Electric driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required.(a)Horizontal type, end suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm.at highest and farthest outlet at specified flow of 2280 lpm at 55 m. head conforming to IS 5120. coupled to 40 HP SQ cage induction motor, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c)M.S. fabricated Common base plate, coupling guard, foundation bolts etc. as required. (d)Inter connection with suitable size PVC insulated PVC sheathed armoured copper conductor cable etc as required. (e)Suitable cement concrete foundation dulyplastered with antivibration pads.

DIESEL ENGINE DRIVEN PUMP

Supplying, Installation, Testing and Commissioning of Diesel Engine driven main fire pump suitable for automatic operation and consisting of following : complete in all respect as required.(a)Horizontal type, end suction pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg/sq.cm.at highest and farthest outlet at specified flow of 1620 lpm at 55 m. head conforming to IS 5120. coupled to

50 HP, 1800 RPM water cooled with radiator, Diesel engine conforming to relevant BS & IS standard complete with auto starting mechanism, 12 Volts/ electric starting equipment , Diesel tank, exhaust pipe extended up to 1.0 m.out side pump house duly insulated with 50 mm. thick glass wool with 1.0 mm. thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.(c)M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.(d)Providing and fixing 15 mm dia GI pipe C class for fuel line as required. (e)Suitable cement concrete foundation duly plastered with antivibration pads.

JOCKEY PUMP

Supplying, Installation, Testing and Commissioning of Electric driven pressurisation pump suitable for automatic operation and consisting of following : complete in all respect as required. a)Horizontal type, end suction / monoblock pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal and flow of 2280 lpm at 55 m head conforming to IS :5120. (b) 10 HP/nearest, TEFC class 8 type suitable for operation on 415 volts, 3 phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325.(c)M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required. (d)Inter connection with suitable size PVC insulated PVC sheathed armoured copper conductor cable etc as required. (e)Suitable cement concrete foundation duly plastered with antivibration pads.

CONTROL PANEL

PRIMING TANK

Supply and installation of out door type MS priming water storage tank of not less than 1000litters (confirming to IS12701) with supporting structure and base complete with inlet, outlet, drain, manhole and cover etc as required

ABOVE GROUND/UNDER GROUND PIPING

Providing, laying, testing and commissioning of 'C' class heavy duty GI pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete as required.

100 mm dia

80 mm dia

25 mm dia

BUTTERFLY/ BALL VALVE

Supplying , fixing, testing and commissioning of butterfly valve PN 1.6, bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS 13095 of following sizes as required.

100 mm dia

80 mm dia (for yard hydrant & pressure pump)

25/20 mm dia

NON RETURN VALVE

Providing and fixing horizontal type cast iron double flanged Non -return valve of approved quality conforming to IS:5312 with bolts, nuts, washers, 3mm thick insertion rubber gaskets complete. as reqd.

100 mm dia

80 mm dia

25 mm dia

HYDRANT VALVE

Supplying and fixing single headed internal hydrant valve with instantaneous gun metal /Stainless steel coupling of 63 mm dia with cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal cap and chain as required.

HOSE BOX

Supplying and fixing of weather proof hose cabinet fabricated from 2mm thick MS sheet with 6mm thick glazed front glass doors and looking arrangements suitable for accommodate extrnal hydrant with buttrfly valve, 2 Nos 15 Mtrs long hose pipe, 1 No. branch pipe, fittings etc.for yard hydrant.The cabinet shall be painted with one coat of primer and 2 coatts of synthetic enamel paint of post office red externally and white internally and shall be suitably mounted on concrete base.

HOSE REEL

Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 © Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe (Make : EVERSAFE/SRI)

FIRE HOSE

Providing and installation of 63 mm dia,15 Mtr long rubber lined woven jacketed hose pipe, type- A (Reinforced rubber lined) of IS-636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve / hose pipe / branch pipe with gunmetal male & female couplings (IS:903:1993) ( For internal Hydrants & Yard Hydrants)

BRANCH PIPE

Providing and installation of Branch pipe of 63 mm dia having Gunmetal/Stainless steel body with hexagonal head of 20mm dia nozzle conforming to IS903 with ISI mark

AIR CUSSION VESSEL

Supplying, Installation, Testing & Commissioning of air cushion tank ( air vessel) of continuous welded construction, fabricated out of atleast 8mm thick steel with dished ends, galvanised to IS:4736-1968 and supporting legs, 250mm dia & 1200mm high complete with necessary air release valve, safety valve, pressure gauge, flange connection to the wet riser piping with necessary piping to meet the functional requirement of the system.

PRESSURE GAUGE

Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification.

PRESSURE SWITCH

Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/lOA resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC suit with ball valve etc. complete as required.

AIR RELEASE VALVE

Supply, installation, testing and commissioning of Gun metal Air Release valve 20mm dia

FIRE BRIGADE INLET

Providing and fixing 4 way Fire Brigade connection housed in steel cabinet of size 900 mm x 750 mm x 400 mm fabricated from 2 mm thick MS sheet having lockable arrangement openable glazed door with 4 mm thick glass including painting with one cat of primer and two coats of postal red enamel paint, necessary supports for the cabinet etc with 150 mm dia Non-return & Butterfly Valve complete in all respect as required.

FOOT VALVE

Supply installion testing and commisssioning of Foot valve of following sizes

200 mm dia

80 mm dia

FIRE EXTINGUISHER

Supply and installation of ABC type fire extinguisher o54 kg. Capacity complete with initial charges and installation brackets.

Supply and installation, testing and commissioning of CO2 type fire extinguisher with 4.5kg capacity complete with installation brackets with ISI mark IS:15222

ADDRESSABLE FIRE ALARM PANEL

Supply, installation, testing & commissioning of 16 /18 zone fire alarm panel

DETECTORS

Supply and installation, testing and commissioning , of Smoke Detector

HEAT DETECTORS

Supply and installation, testing and commissioning of Heat Detector

MANUAL CALL POINT

Supply and installation, testing and commissioning of of manual call point

Hooter

Supply and installation, testing and commissioning of audio alarm Hooter

FRLS CABLE

Supplyand installation, testing and commissioning of 2C x 1.5 Sq.mm twisted pair copper cable ISI marked with proper clamping, supports and terminations.

Fee to be remited to Fire &rescue service Department (actual amount incurred for the above items will be reimbursed on production of orignal documents)