Const. of Veterinary Poly Clinic at village Beholi in Distt. Kurukshetra (Pdg. Street Light Only).

Amount

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work· Exposed on wall 32 mm dia nominal bore HSR NO. 22.88.4

40 mm dia nominal bore HSR NO. 22.88.5

Wiring main ,sub mains and Circuit wiring in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in MS Conduit etc as required. 1 run of Size 1.50 Sqmm(1/1.40mm) HSR NO. 23.1.6.1

Supply and erection of MS conduit pipe 1.6 mm thick , ISI marked surface/recessed in slab/wall/ceiling etc. including cost of MS bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. MS Pipe of 20 mm dia. HSR NO. 23.6.6.1

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. PVC pipe of 32 mm dia. HSR NO. 23.7.6.3

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings MCCB up to 125 A FP HSR NO. 23.22.2.1

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 amp, 25 KA HSR NO. 23.22.1.3

Supply and erection of miniature circuit Breaker/isolator 240/415 V in the existing distribution board including making necessary connections:- 6 amp. to 32 amp MCB's TRIPLE POLE HSR NO. 23.22.5.5

Supply and election of Goodridge Almirante type MS pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 750 mm wide, 1200 mm high, 300 mm deep and bottom totally open , duly embedded in cement concrete block of size 900 mm*450 mm*200 mm above ground level , having a base of size 1050 mm* 600 mm* 250 mm below ground level. HSR NO. 23.27.3

EARTHING AND LIGHTENING ARRESTOR Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. HSR NO. 24.1.1

Extra for using salt and char coal/coke for pipe earth electrode as required. HSR NO. 24.1.2

Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. HSR NO. 24.1.3

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. HSR NO. 24.1.5

Providing and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required. HSR NO. 24.1.11

Providing and fixing 4.00 mm dia G1. Wire on surface or in recess for loop carthing as required. HSR NO. 24.1.13

Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. HSR NO. 24.1.7

Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. HSR NO. 24.1.8

Laying of underground cable in pipe /existing open/closed trench etc as required:- 16 Sq mm to 35 sqmm 2 to 4 Core HSR NO. 24.2.4.2

Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core HSR NO. 24.2.7.3

Erection of street light fitting on the pole including the cost of petty material required (irrespective of height/length of bracket) At Pole upto the height of 4.5 metres HSR NO. 24.4.4.1

At Pole above 7 metres but upto the height of 9 metres. HSR NO. 24.4.4.3

Supply and erection of Single Phase weather proof M.S. box of size 20 cm x 15 cm x 10 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A bakellite connector, 1 no. 6 amp SP MCB and 1 Nos. 16 amp. neutral links fixed on bakellite sheet in the M.S. box including painting and necessary connections. HSR NO. 24.4.5

Supply and erection of Hot Dip Galvanized octagonal pole of 3mm thickness, with base plate including cost of nut and bolts , earthing studs, Integral Cable termination arrangement 5 mm thick Bakellite base plate on suitable welded MS/GI bracket 32 A four way connector 2 no 10 A SP MCB , end cover and all accessories as supplied by the manufacture including Providing RCC foundation of M25 grade (1 Cement : 1 Stone aggergate: 2 Coarse sand) i/c excavation ,steel rainforcement (Fe 500 ) @ 80 Kg/cum of concrete content, concrete cover 50mm, anchorbolts etc. over a bed of PCC 1:5:10 of required dimensionsfor octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in Charge. 7 Mtr Long pole with top dia 75 mm and bottom dia 150 mm with base plate of size 300 x 300 x 20 mm HSR NO. 24.4.8.5

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia HSR NO. 24.5.2.3

RCC FOUNDATIONS FOR OCTAGONAL POLES Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 70 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge. 7m high pole HSR NO. 24.8.5

WIRING SWITCHES AND ACCESSORIES MS CLAMPS EL035

Supply of 16 Sqmm 4Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-1

Supply of 25 Sqmm 4Core Cable, Grandlay make, PVC/XLPE insulated ( Heavy Duty) Electrical Cables for working voltage upto and including 1100 Volts to IS:1554 (PART-I) with Aluminium conductor-ISI marked Power Cable - Aluminium Conductor (Make : Grandlay, Polycab, Plaza). NS-2

Supply of LED Streetlight Luminaries 72 watt of Crompton make (Model No. LSTP-72-CDL) (NEXUS+) Aesthetically designed roadway luminaries with excellent thermal management complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips / Bajaj/ Hevells/ Surya). NS-3

Supply of LED Flood Light 120 watt of (PLUTO) Crompton make (LFLN-120-CDL/60) Rectangular LED Flood Light with innovative thermal management and available in multiple optics and equipped with IP66 protection including connection of the same upto the entire satisfaction of Engineer in Charge of the work (Equivalent model of Philips / Bajaj/ Hevells/ Surya). NS-4

Supply of 25 watt LED Gate light, Bajaj Make, Model No. BLPTSP 25W NW LED (111741) LED Post top in spherical shape polycarbonate diffuser & IP65 protecsion and accessories required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work and equivalent make Bajaj/ Crompton / Hevells/ Surya. NS-5

Supply & Erection of Single arms bracket made of 40mm dia GI pipe B class ISI 1.50 mtr. Long with coller of GI pipe 75cm Long duly fitted on 7/8Mtr. Otacgonal pole and top covered with ornamental cap duly welded, painted 2 coats of aluminium paints on bracket and golden paint of ornamental cap including the cost of labour and petty material etc. to complete the job in all respect upto the entire satisfaction of Engineer-in-charge. NS-6

Supply and erection of 32 Amp. 3 Pole/230V Astronomical automatic time switch of Hevells / Indo Asian / LNT make Cat No. TL065ASO alongwith contactor of required capacity movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work. NS-7

Kalra Electricals