Imp. Of Playground at Bhudan field including Installation of Child Playing Equipment and Open Gym, Toilet Walking Track etc in W No 31

Earth work in excavation of foundation in oridinary soil within the initial lead and lift including dressing and levelling the bed and depositing the excavated materials away from the work site etc. all complete as directed by the Engineer-in-charge

Sand Filling foundation and plinth with sand well watered and rammed including all cost, carriage, royality, taxes and all labour, T & P etc. all complete as per the direction of Engineer-in- charge.

Cement concrete (1:3:6) using 40mm and down gradedhard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge.

Supplying and fixing of Pre cast kerb stone of size 600mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984.

Providing laying, spreading and compacting graded stone aggregate to "WET MIX MACADAM" specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achive the desired density as per Clause 406 of MoSRT&H specification for road and bridge works.

cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP-63:2018.

Painting two coats with weather seal coat over a coat of water bound wall primercompletion of item of work as per the direction of Engineer- in- charge.

Supplying and stacking of good earth and carriage complete( earth measureed in stacks will be reduced by 20% for payment)

Boundary Wall Providing R.C.C. M20grade with 20mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge. Column Base

Colomn & Beam

Plinth Beam

TMT reinforcement for R.C.C. work including cutting, bending, binding and placing in position Labor for including cost of binding wire 18 to 20 gauge and cost conveyance of M.S. rod etc. all complete.

Fly ash Brick masonry in cement mortar (1:6) in F&P with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge.

Fly ash Brick masonry in cement mortar (1:6) in Superstructure with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge.

Providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Providing 16mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Supplying fitting fixing of main gate GI framed fitting including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Painting two coats over a coat of primer on new wood/Steel work of doors, windows, grill and including all labour, T & P, cost of paints as per the direction of Engineer-in-charge.

TOILET Providing R.C.C. M20grade with 20mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge. Column Base

Colomn & Beam

Plinth Beam

Lintel

TMT reinforcement for R.C.C. work including cutting, bending, binding and placing in position Labor for including cost of binding wire 18 to 20 gauge and cost conveyance of M.S. rod etc. all complete.

2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work.

Fly ash Brick masonry in cement mortar (1:6) in F&P with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge.

Fly ash Brick masonry in cement mortar (1:6) in Superstructure with all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in- charge.

Providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Providing 16mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the E.I.C

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the E.I.C

Supplying fitting fixing of main gate GI framed fitting including all cost of the materials, carriage, alltaxes and all labour involved for completion of item of work as per the direction of Engineer-in-charge.

Supplying, fitting and fixing up window(sliding type) made up aluminum section No.9778 as window fram, section No.4095, 4096 & 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber bending inculding locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge.

Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect.

Providing fifting and fixing of Al. door with anodized Al. door section No.9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section as 9221 and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&p, hire charges of drilling machine, labour charges etc.complete

Finishing plastered surface with plaster of paris and making smooth surface to receive painting including cost of plaster of paris.

Wall painting two coats with plastic emulsion paint with cost of paint.

Painting two coats over a coat of primer on new wood/Steel work of doors, windows, grill and including all labour, T & P, cost of paints as per the direction of Engineer-in-charge.

Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete.

Supplying ,fitting fixing of WPC door including cost of material, labour etc complete

Supplying fitting fixing of good quality WPC(Black cobra) chowkath(0.08m x 0.125m) framed and fixed (wrought & putup) in trusses, purlins, frames of doors & windows, ventilators, beams etc. as per the direction of the EIC.

Providing P.C.C. (1:2:4) grade with 12mm and down graded CBHG chips including hoisting and laying with all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of Engineer-in- charge.

Supplying Fitting and fixing adjustable bathroom ventilation glass louvers (0.45 mx0.75m) in position in wooden, steel window frames including Frosting glass-panes including cost of all labour and materials cutting grooves etc complete

supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.\ 250mm to 375mm thick wall

Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes (SDR 11) conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. (Make: Oriplast/Supreme/Astral/Hariplast/Fenolex & Equivalent) 32mm Outer dia C-PVC pipe(External)

25mm Outer dia C-PVC pipe(External)

Providing and fixing R.C.C. RING cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and extra sockets jam ts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P for providing fitting and fixing of brass/C.P fittings of the following nominal bore with supply of all jointing materialsetc. all completed as per approved specification and direction of E.I.C 15mm dia C.P.angular stop cock

15mm dia C.P. Long body bib cock

15mm dia C.P. short body bib cock

15mm dia C.P concealed stop cock

C.P. towel rail.(450x20)mm

C.P.revolving shower (bend type)

15mm dia C.P pillar cock

C.P.grating

C.P. extension piece-2"

C.P. flange(Big)

C.P. waste. (32mm -5" long)

C.P.soap holder

Liquid Soap container

CP Jet spary with 1.0 1 RM PVC Tube

110 mmdia UPVC SWR Pipe (Type B)

75mm dia U-PVC SWR pipes (Type B)

75x75x75 mm dia UPVC Plain Shoe Bend 450

110mm dia P.V.C. SWR S Trap

110 mm dia P.V.C. SWR Vent Cowl

Porcelain Flat back standing Urinal (Medium)

550mm x 400mm wash hand basin (Hindware/Parryware/Neycer/ CERA)

Bevelled Edge Mirrior

C.I. Basin Bracket in pair

Hindware Prima Floor Mount One Piece EWC Western Commode

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC conduit with 5Amp, 250 V piano type switch with white colour frame ISI marked and ceiling rose ISI marked mounted on MS box having front bakelitecover of suitable size , MS box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor asearth wire including all accesories and connection as per direction of Engineer in Charge

Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3pin 5 / 6 amps socket outlet and 5 / 6 amps piano type switch & with colour frame, connection, painting etc as required. complete as per the direction of Engineer-in-Charge..

Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including providing and fixing 2 nos MCB & with colour frame, connection, painting etc as required. complete as per the direction of Engineer-in-Charge..

Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (2 x 1.5 + 1 x 1.0) sq.mm copper wire for 6A Light plug Point, wall fan.

(2 x 2.5 + 1 x 1.5) sq.mm copper wire from Main Switch to BDB.

Celling Fan

Supplying & Fixing of angle / Batten Holder fitting complete with 1 no of LED Lamp 10 watt of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Supplying & Fixing of light angle / Batten Holder fitting complete with 1 no of LED Lamp 10 watt of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Supplying & Fixing of outer flood light angle / Batten Holder fitting complete with 1 no of LED Lamp 10 watt of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells).

Please Enable Macros to View BoQ information