Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹25.1 LAccepted-AOC BAGGA IN TEHSIL JAWALI DISTT KANGRA H P | KANGRA | HIMACHAL PRADESH | 175013 | L-1 | Accepted-AOC Accepted | |
| 2 | L-2₹25.4 L+₹29,911 (1.19%)Rejected-AOC | L-2 | Rejected-AOC Rejected | |
| 3 | L-3₹27.7 L+₹2.6 L (10.5%)Rejected-AOC HIMACHAL PRADESH HP | L-3 | Rejected-AOC Rejected | |
| 4 | L-4₹27.8 L+₹2.7 L (10.7%)Rejected-AOC HIMACHAL PRADESH HP | CHAMBA | HIMACHAL PRADESH | 176315 | L-4 | Rejected-AOC Rejected | |
| 5 | L-5₹28.7 L+₹3.7 L (14.6%)Rejected-AOC | L-5 | Rejected-AOC Rejected |
Tender Value
₹28.3 L
EMD Value
₹50,000
Closing Date
31 May 2022, 4:00 pmClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER HPPWD DIVISION JAWALI
Construction of Building
2022_PWD_60699_1
PWJ/CB/TENDER/22/7389-7419 Dt 12.05.2022
Open Tender
Civil Works - Buildings
Item Rate
90 days
JAWALI
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,500
₹50,000
29 Jun 2022
18 May 2022
1 Jun 2022
18 May 2022
31 May 2022
18 May 2022
Amount
Earth work in excavation by mecahnical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (One point five milimetres) in width or 10sqm (Ten squaremetre) on plan) including dressing of side and ramming of bottams, lift upto 1.5m (One point five metres) including getting out the excavated soil and disposal of surplus excavated soil as directed within all leads all kind of soil, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (One cement : five coarse sand: ten graded stone aggregate 40 mm (Forty milimetres) nominal size), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (One cement : Six coarse sand : twelve graded stone aggregate 20 mm (Twenty milimetres) nominal size) upto plinth level with Cement mortar 1:6 (One cement : Six coarse sand), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Centering and shuttering including strutting Suspended floors, roofs, landings, balconies and access platform, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Centering and shuttering including strutting, propping etcetera and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Centering and shuttering including strutting, propping etcetera and removal of form for Columns, pillars, piers abutments, posts and struts, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Centering and shuttering including strutting, propping etcetera and removal of form for Edges of slabs and breaks in floor and walls under 20cm (Twenty centimetres) wide, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (Fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : and and half coarse sand : three graded stone aggregate 20 mm (Twenty milimetres) nominal size) including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (One cement : one and half sand : three graded stone aggregate 20 mm (Twenty milimetres) nominal size), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (One Cement : two coarse sand : four graded stone aggregate 20 mm (twenty milimetres) nominal size) , including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and laying damp proof course 100mm (One hundred milimetres) thick with cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 12.5mm (Twelve point five milimetres) nominal size) and curing complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 (VG-ten) of approved quality using 1.7 kg (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) and curing complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in super structure above plinth level up to floor all level in cement mortar 1:4 (One cement : four sand) including carriage of material within all leads and lifts and other incidental. The rate is including of octroi, royality, Malkana, toll tax, sale tax GST or other taxes imposed by the Government.
Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, (five centimetres to twenty centimetres) in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, toll tax, sale tax, malkana and all other taxes as imposed by the Government.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Precast terrazo tiles 22 mm (Twenty two milimetres) thick with graded marble chips of sizes upto 12 mm (twelve milimetres) in skirting and risers of steps not exceeding 30 cm (Thirty centimetres) in height, on 12 mm (twelve milimetres) thick cement plaster 1:3 (One cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Dark shade pigment using ordinary cement , including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm (twelve milimetres) in skirting and risers of steps not exceeding 30 cm (Thirty centimetres) in height, on 12 mm (twelve milimetres) thick cement plaster 1:3 (One cement : three coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of : Light shade pigment using white cement, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
15 mm (Fifteen milimetres) cement plaster on the rough side of single or half brick wall of mix, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
6 mm (Six milimetres) cement plaster of mix 1:3 (One cement : three fine sand), to ceiling and curing complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and applying white cement based putty of average thickness 1 mm (One milimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre ( fifty grams obleque litre) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Finishing walls with water proofing cement paint of required shade, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm (Twelve milimetres) thick bed of cement mortar 1:3 (One cement : three coarse sand) and jointing with grey cement slurry at the rate of 3.3kg per sqm (three point three kilogram obleque per square metre) including pointing in white cement mixed with pigment of matching shade complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (Thirty five into thirty five into five milimetres) joints mitred and welded by angle iron 35x35x5 mm (Thirty five into thirty five into five milimetres) or 35x 5 mm (thirty five into five milimetres) flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge., including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.
Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply (Three ply) veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and fixing 35 mm thick ISI marked flush door shutters of conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply (Three ply) veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and fixing steel glazed doors, windows and ventilators of standard standard rolled steel section joints mitred and welded with 16x3.15mm (sixteen into three point one five milimetres) lugs 10cm (ten centimetres) long embedded in cement concrete blocks 10cmx10cmx15cm (ten centimetres into ten centimetres into fifteen centimetres) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (twenty milimetres) nominal size), or with wooden plug and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fittings including providing and fixing glass panes with grazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. Side Hung windows, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.
Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (sixteen into three point one five milimetres) lugs 10cm (ten centimetres) long embedded in cement concrete block 10x10x15cm (ten into ten into fifteen centimetres) size of 1:3:6 (One cement : three sand : six graded)or with wooden steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints including carriage of materials within all leads, lifts and other incidental charges. The rate is includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government. Fixed steel windows.
Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (sixteen into three point one five milimetres) lugs 10cm (ten centimetres) long embedded in cement concrete block 10x10x15cm (ten into ten into fifteen centimetres) size of 1:3:6(One cement : three sand : six graded) or with wooden steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paints including carriage of materials within all leads, lifts and other incidental charges. The rate is includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government. Top hung Ventilator.
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five into five milimetres) joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five into five milimetres) or 35x 5 mm (thirty five into five milimetres) flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge., all complete as per the direction of Engineer-In-charge,including carriage of materials within all leads, lifts and other incidental charges. The rate is includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government
RANJEET SINGH
BHARAT BHUSHAN SHARMA
ARUN KUMAR
Neeraj
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .