EXECUTION OF BALANCE WORK RELATED TO SUPPLY OF WATER FROM NARMADA CANAL JALORE DISTRICT FOR JALOR TOWN AND 281 VILLAGES DISTRICT JALORE UNDER FR PROJECTS ON SINGLE RESPONSIBILITY TURNKY JOB INCLIDING 5 YEAR O AND M ON RISK AND COST

Amount

PART-A

A-1- Inlet Channel & Inlet well

RWC1 - Civil Works

Design and Construction of Inlet channel from Ratoda distributory near offtake point ‘F’ at RD 44.22 of main Narmada canal to Inlet Well capable to carry 3.5 cumec of raw water all as per specification conceptual drawing of department its testing etc. complete approximate length 617 mtr

(iv) Back filling & site clrarance etc. complete (Balance work-10%)

(3) MS Pipes (as per manufacturer’s standard) of 1600 mm dia with all fittings flanges, bends, tees, reducers, enlargers, tail piece, blind flanges, manholes, nut, bolt and gasket, painting etc. complete from inlet well to RWPH all as per specification, conceptual drawing etc. of department.(200 mtr Approx) (Supply)

Installation (Laying balance 10 % work)

RWM1 - Mechanical Equipment & Accessories

Electrically operated sluice Valves of PN-1 rating 1600 mm dia with Electric Actuators and dismantling joints, gear box for manual override complete all as per specification , provision of departmental tender document

(c) Testing and commissioning (10%)

Electrically operated sluice gate with electric actuator on inlet channel side face of inlet well and construction of weir for flow measurement

(b) Erection (30%)

(c) Testing and commissioning (10%)

Supply and laying of minimum 1600 mm dia cement mortar lined MS pipes encased in cement concrete below the level of LDPE film from Inlet Well to inlet chamber in the RWR as per conceptual drawing.

Installation(Balance 10 % Work)

Testing(Balance 10 % Work)

MS Blind flanges 1000mm as per relevant standard

Supply

Installation

Testing

RWE 1 Electrical Equipment and Accessories

LT panels and other equipments, accessories as per requirement

Erection(Balance 10 % Work)

Testing and commissioningComplete

RWI1 Instrumentation

Ultrasonic type flow measuring equipment for installation on inlet channel with transmitter & Digital flow indicator & Flow integrators with provision of Data transmission through PLC and SCADA system

Erection

Testing and commissioning

A-2- Raw Water Pump House

RWC 2- Civil Works

(1) Design and construction of framed type 2 tier RCC structures with two compartments of sump of RW pump house to house the motors of VT pumps, 0.415 KV switchegear, starters, OHT craneand other allied civil structures at top floor and to house

(g) Brick work, Doors & windows, Plastering & painting(Balnce 25 % Work)

(2)Design and construction of RCC Balancing Well near Compartment I of RW pump house to collect Raw Water from pump house and deliver it to RWR all as per specifications conceptual drawing of department

Finishing Work Walkway Hand Railing etc(Balnce 30 % Work)

Hydrotesting

(3) Design & Construction of approach portal frame type RCC ramp /bridge from RWR bank to top floor of RW pump house to support 1600 mm dia common manifold and to provide access from RWR bank to RW pump house with provision of cantilever passage around the balancing well and other essential utilities at RW pump house all as per conceptual drawing of department.

RCC - Raft including E/W & PCC

RCC - Walls 1/2 Height

RCC - Walls Full Height

RCC - Roof Slab

Supply & fixing of Structural Steel

(4) Providing Safety Equipment for fire etc. and all other items and accessories not specified above but required to complete the work on turnkey basis.

RWM2 Mechanical Equipment & Accessories

(1) Vertical Turbine Pumps with column pipe & other accessories all as per design requirement, specifications, conceptual drawing of the department.

For pumping to RWR (Compartment I)

(i) Pumps of 1750 LPS and required head

Testing and commissioning@10%

For pumping toWTP (Compartment I I)

(i) Pumps of 640 LPS and required head

Installation Part work balance

Testing and commissioning@10%

(ii) Pumps of 1240 LPS and required head (HWL)

Testing and commissioning@10%

(2) MS Delivery Pipes (as per manufacturer’s standard) and manifold of 1000 mm and 1600 mm dia with all fittings flanges, bends, tees, reducers, enlargers, tail piece, blind flanges, manholes, nut, bolt and gasket, painting etc. complete up to the inlet channel of WTP and 1800 mm dia MS pipe from Balancing Well to RWR all as per specification, conceptual drawing etc. of department.

1600mm dia MS Manifold Pipe

Testing and commissioning@10%

(3) Electrically operated Butterfly Valves with Electric Actuators, gearbox and dismantling joints on individual delivery piping with all accessories of suitable dia and pressure rating as per design.

(a) For pumps to RWR

Testing and commissioning@10%

(b) For LWL pumps

Testing and commissioning@10%

(c) For HWL pumps

Testing and commissioning@10%

(d) 1000 mm dia in common manifold

Testing and commissioning@10%

(e) 1600 mm dia in common manifold

Installation (@30%

Testing and commissioning@10%

(f) 1800 mm dia piping from balancing well to RWR

Installation (@30%

Testing and commissioning@10%

(4) Dual Plate type Check valve

(a) For pumps to RWR

Testing and commissioning@10%

(b) For LWL pumps

Testing and commissioning@10%

(c) For HWL pumps

Testing and commissioning@10%

(5) Laying of 1600 mm dia. MS pipe line with same size electric operated BFV to interconnect Compartment I & II of sump of RW pump house

Testing and commissioning@10%

(7)Other items & accessories not specified above but required to complete the work on turn key basis as per scope and specifications specified in tender document.

RWE2 Electrical Equipment & Accessories

0.415 KV motors for Vertical Turbine pumps with all accessories

(i) For pumping to RWR

Testing and commissioning@10%

iI) For Pumping to WTP

(a) For LWL pumps

Testing and commissioning@10%

(a) For HWL pumps

Testing and commissioning@10%

415kV LT panel with 2 incomers, 9 nos outgoing feeders for LT motor and bus coupler etc all as per specification

Installation (Balance 20 % Work)

Testing and commissioning@10%

(3)Batteries, Battery Charger with DC Distribution Board and accessories

(4) Providing local control consoles for all motors

5) LT cables with cable trays & accessories

(6) Earthing system complete for LT equipments

Testing and commissioning@10%

(7) Lightning protection system of pump house

Installation (@30%

Testing and commissioning@10%

(8)External illumination system of pump house

(9) Internal illumination system of pump house (Balnce 40 % Work)

(10) Exhaust Fans, wall mounted and pedestal type air circulators and other ventilating arrangements like roof extractors etc for both the bottom and top floors.

(11)Desert Coolers for Pump House, duty space etc. (long body with 15” exhaust fan)

RWI2- Instrumentation

(1) Providing Instrument Control Panel (ICP)

Installation(Balnce 10 % Work)

Testing and commissioning@10%

(2) Full bore Electro Magnetic flow meter with transmitter & Digital flow indicator &Flow integrators

Installation (Balnce 10 % Work)

Testing and commissioning@10%

(3) Sump Level sensor capacitance type with transmitter and digital indicator (Supply)

Installation (@30%

Testing and commissioning@10%

(3)Pressure sensors, transmitter and indicator & pressure gauge

Pressure Transmitter

Installation (@30%

Testing and commissioning@10%

Pressure Gauge

Supply @60%

Installation (@30%

Testing and commissioning@10%

(5)Temperature sensors for motors and pump bearing temperature & motor winding temperatures, sensors & scanners

Temperature Sensor

Temperature Scanner

(6) Noise Meter (Portable) Balance work of testing & Commissioning

(7) Vibration Meter (Balance work of testing & Commissioning)

A-3 Raw Water Reservoir

RWR 1 E/W, Lining & other works

(2) Site clearance including uprooting of rank vegetarian, bush woods, trees and sapling of girth upto 15 cms and removal of rubbish etc. complete as per specifications.Balance 10 % work

(3) Earthwork in embankment in all type of soil, (ordinary soil, hard & dense soil, soil mix with boulders and rock) for all leads and lifts including excavation, loading, unloading, transporting from burrow pits, dagbelling, finishing of formation to required camber and grade, disposed soil to be levelled and dressed, including breaking of clods laying of soil in layers not exceeding 230mm (loose thickness) in required side slopes, including watering, compacting soil at optimum moisture contents with road roller etc. of 90% modified Proctor density etc complete as per specification and as directed by engineer in charge.

(i) Excavation

(ii) Formation of Embankment

(4) LDPE film lining with 60cm screened earth cover including excavation of the existing bed upto 60cm depth, dressing of excavated surface, removal of all irregularities, roots of trees etc. then screening of excavated earth and stacking in separate stacks disposal of screened material out of the reservoir as directed, then providing and laying of 250 micron LDPE film of Ist quality as per IS:2508-1984 including interlocking of two adjacent sheets by thermal sealing over 10 cm thick tibba sand as sub grade duly watered and rammed in two layers including spreading of antiweed and antitermite treatment and then laying 60cm thick screened earth cover over LDPE film in 15 cm layers duly consolidated by ramming and watering etc complete as per specifications.

(i) Supply of LDPE Film @ 70%

(ii)Laying & earth filling@10%

(iii)earth filling @20%

(5) Providing & Laying Double tile lining on inner slope of RWR with PCC blocks 40 mm thick made of cement concrete (1:3:6) M-10 grade mix with aggregate size up to 20 mm crusher broken including manufacturing of PCC tiles mechanically vibrated at site in size of 300 x 150 x 40 mm including all leads & lifts of material. The double Tile lining shall be comprised of base plaster and sandwich plasters as per the detail specifications.

(i) Supply of Tiles

(ii) Erection of Tiles

(6)Mulching on sides of heavy cutting and heavy filling with senia and fog in perallelogram shape etc. including cutting and transportation of senia and fog from nearby fields and digging the trenches 20mm deep and fixing senia and fog on interior angle 45 degree and sides of each parallelogram 1.0m as per specification.

RWR2 - Construction of Toe Wall

(1) Earthwork in excavation of foundation trenches or drains including dressing of sides and ramming of bottoms, including taking out of excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil for all leads and lifts etc complete as per specification and as directed by Engineer.

(i) Excavation

(ii) Disposal of Surplus Earth

(2) Providing and laying M-10 grade mix 1:3:6 (1 cement : 3 course sand : 6 graded stone aggregate) including curing, compaction etc. complete using stone aggregate 20mm nominal size in foundation and plinth excluding cost of shuttering etc complete as per specification and as directed by Engineer. .

(3) Providing and laying of 250 micron LDPE film of first quality over 10 cm tibba sand as sub grade in two layers including dressing of bed, spreading of antiweed and antitermite and compaction etc complete as per specification and as directed by Engineer.

Supply of LDPE Film

Laying of LDPE Film

sand filling

RWR3- Construction of Dowel wall for RWR & Ramp

Earthwork in excavation of foundation trenches or drains including dressing of sides and ramming of bottoms, including taking out of excavated soil and depositing and refilling of jhiri with watering and ramming and disposal of surplus excavated soil for all leads and lifts etc complete as per specification and as directed by Engineer. Eartwork

Excavation @90%

Disposal of Surplus earth 10%

Providing and laying M-10 grade mix 1:3:6 (1 cement : 3 course sand: 6 graded stone aggregate) including curing, compaction etc. complete using stone aggregate 20mm nominal size in foundation and plinth including cost of shuttering etc complete as per specification and as directed by Engineer for 30 X 60 cm size dowel wall with 45 cm X 15 cm base CC at RWR embankment and ramp. It shall have drain hole 150 X 150 mm size at 3 m interval.

For Foundation

For Walls

RWR4- Construction of Ramp & Stairs in Reservoir

(1)Earthwork in embankment in ordinary soil for all leads and lifts including excavation, loading, unloading , transporting from burrow pits, dagbelling, finishing of formation to required camber and grade, disposed soil to be levelled and dressed, including breaking of clods laying of soil in layers not exceeding 230mm (loose thickness) in required side slopes, including watering, compacting soil at optimum moisture contents with road roller etc. of 90% modified Proctor density etc complete as per specification and as directed by engineer.

Excavation

Formation of Embankment

(2)Providing and laying M-10 grade mix 1:3:6 (1 cement : 3 course sand: 6 graded stone aggregate) including curing, compaction etc. complete using stone aggregate 20mm nominal size in foundation and plinth excluding cost of shuttering etc complete as per specification and as directed by Engineer.

(3)25 mm thick fine dressed and machine grinded surface stone flooring over 20 mm thick base in CM 1:6 with joints finished flush with sand stone etc for steps complete as per specification and as directed by Engineer

Supply of Surface Stone

Laying of Surface Stone

100 mm thick CC top flooring in 1:2:4 grade over 100 mm thick lean concrete of 1:3:6 grade for ramp top surface

Providing & Laying Double tile lining on both sides of Ramp with PCC blocks 40 mm thick made of cement concrete (1:3:6) M-10 grade mix with aggregate size up to 20 mm crusher broken including manufacturing of PCC tiles mechanically vibrated at site in size of 300 x 150 x 40 mm including all leads & lifts of material. The double Tile lining shall be comprised of base plaster and sandwich plasters as per the detail specifications.

Supply of Tiles

Erection of Tiles

Providing and Laying cement concrete including curing compaction etc complete for 40 mm thick coping excluding the cost of shuttering.

RWR5 - Construction of Toe Filter

Collection of coarse, clear, sharp river sand (Bajri) passing IS sieve 2.36mm and retained on 180 micron sieve from nearest quarry etc complete as per specification and as directed by Engineer

Collection of graded gravel/unscreened kankar for soling, including stacking as per the standard specifications from nearest quarry etc complete as per specification and as directed by Engineer

Earthwork in cutting with lead upto 50m and lift upto 1.5m including dagbelling, finishing of formation to required camber and grade, disposed soil to be levelled and dressed in ordinary soil etc complete as per speification and as directed by Engineer

Spreading of gravel, mooram, quarry rubbish, kankar, coarse aggregate etc. to required grade and camber in layers not exceeding 15cm thickness (loose) as per specifications including dressing etc complete as per speification and as directed by Engineer

RWR6 - Construction of Road on embankment, approach road & other road

Earthwork in embankment in ordinary soil for all leads and lifts including excavation, loading, unloading, transporting from burrow pits, dagbelling, finishing of formation to required camber and grade, disposed soil to be levelled and dressed, including breaking of clods laying of soil in layers not exceeding 230mm (loose thickness) in required side slopes, including watering, compacting soil at optimum moisture contents with road roller etc. of 90% modified Proctor density etc complete as per specification and as directed by engineer.

Earthwork in cutting with lead upto 50m and lift upto 1.5m including dagbelling, finishing of formation to required camber and grade, disposed soil to be levelled and dressed in ordinary soil etc complete as per speification and as directed by Engineer

Supplying including carriage with all leads including loading, unloading & stacking, spreading and consolidation/compaction of graded gravel to required grade and camber by power road roller 8-10 tonne weight including watering with all lead of water hire charges of machinery and T&P to attain 95% Proctor density.(with lead of 17Km).

Providing, laying, spreading and compacting stone aggregate of specific size to water bound macadam specification as per clause 404 of 'MoRTH' specification for road and bridge works(Fourth Revision) including cost of material & water with all leads, spreading in uniform thickness, hand packing, rolling with road roller 8-10 tonnes in stages to proper grade and camber applying and brooming requisite type of screening/ binding material to fill up the interspaces of coarse aggregate, watering and rolling making necessary earthern bond to protect edges, lighting, gaurding, barricatings and maintenance of diversions including lead of ballast upto 150Km in all leads of screening/ building material & water.(Compacted thickness as specified to be measured)

63-45mm GRADING-II(Hand Broken) with screening of Grade B of MoRTH specification.

53-22.4mm GRADING-III(Crusher Broken) with screening of Grade B of MoRTH specification.

Providing and applying primer coat over prepared surface of granular base with emulsion as per IS:8887 & manufacturers specification @ 7.5kg/10sqm with a self propelled or towed bitumen pressure sprayer equipped far spraying the material uniformly at specified rates and temperatures (including cleaning of road surfaces) as per MoRTH specification clause 502, 112.

Providing and applying tack coat on the prepared surface with bitumen emulsion as per IS:8887 & manufacturers specification @ 2.75kg/10sqm with a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperature (excluding cleaning of road surface) as per MORTH specification clause 502,112

Providing and laying 20mm thick open grade premix carpet with specified graded crushed aggregates for wearing coarse including cost of antistripping compound, to bring the stripping value of aggregate within permissible limits as per specification, including loading of aggregates with F.E. loader, heating binder and aggregates in hot mix plant 30 to 40 tonne transporting the mix material with tipper and laying with paver finisher to the required level and grade, rolling with power road roller 8-10tonne but excluding cost of tack and seal coat with all lead of mix material as per MoRTH specification cl.511.

Providing & applying premixed seal coat type-B comprising of thin application of fine aggregate including cost of antistripping compound to bring the stripping value of aggregate with an permissible limits as per specification, premix with bitumen binder @ 6.8 kg/10sqm in mini hot mix plant, carriage manually of mixed material and laying and rolling with power road roller 8-10tonne as per MoRTH specification cl 513

RWR7 - Electrification of Raw Water Reservoir

Supply and erection of M.S. steel welded/ swaged tubular pole in position on M.S. base plate of size 400*400*6mm including excavation of pit and filling the same with cement concrete of 1:3:6 from the bottom of the pole and upto 50 cms above the ground level with the help of steel frame in 40cms. dia around the pole including painting with Red oxide primer and aluminium paint/ enamel paint in two coats complete in all respect. The pole shall confirm the following specification etc complete as per specification and as directed by Engineer Type of pole: Over all length 9 m Length of Steps: Top: 2.00m (h1) Middle: 2.00m (h2) Bottom: 5.00m (h3) O.D.(mm)/thickness of section(mm): (i) h1 = 76..1/3.25 (ii) h2 = 88.9/3.25 (iii) h3 = 114.3/3.65

Add for poles with overhangs 1 meter long and made of 76.1mm O.D. and 3.25mm thickness etc complete as per specification and as directed by Engineer

Providing and laying PVC insulated, PVC sheathed cable of 1.1 kV grade with aluminium conductor as per IS:1554 and approved make, including excavation of 50 cm x 75 cm size trench. As per IS:1255, 25 cm thick under layer of sand, II nd classes brick covering, refilling earth in the remaining portion, making necessary connections including testing etc. and including supply, all as per technical specifications (category-I) etc complete as per specification and as directed by Engineer

4 core x 35 sq.mm

4 core x 16 sq.mm

Supply and fixing in position of cable gland in brass nickel plated heavy duty with three metal washers and one rubber ring, double compression flame proof, including preparation of cable and etc. as required and as per technical specifications etc complete and as directed by Engineer

4 core x 35 sq.mm

4 core x 16 sq.mm

Providing and fixing tubular/bullet type cable terminal ends duly crimped with crimping tool including making cable ends ready for crimping and providing insulation tape with colour code etc. as required and as per technical specifications etc complete and as directed by Engineer

4 core x 35 sq.mm

4 core x 16 sq.mm

Providing and fixing street light luminair in position suitable for sodium vapour lamp with integrated control gear comprising heavy duty copper wound ballast condensor, electric ignitor and porcelain terminal block prewired with PVC wire in copper conductor on a detachable tray. The canopy is to be covered with clear acrylic cover adequately gasketed and clamped rigidly with toggles including deep drawn aluminium lamp compartment and reflector and cast aluminium having separate housing for control gear including testing and making connection (without lamp). Category-I etc complete as per specification and as directed by Engineer

Providing and fixing 1x70 Watt HPSV lamps (street lighting lamp) in position including all necessary T&P etc. as required, (category-I) etc complete as per specification and as directed by Engineer

Supplying and laying earth conductor from electrode to source in ground, as required including making connections duly soldered or crimped etc complete as per specification and as directed by Engineer 8 SWG G.I wire

Supply, installation, testing and commissioning of outdoor weatherproof 14 SWG GS junction box for mounting on street lighting pole having 12 terminals rated for 6A, HRC fuse and suitable for 2 nos. cable glands for 4core x 35/16 sq.mm cable with all other accessories, fixing and bolting, etc complete as per specification and as directed by Engineer

RWR8 - Construction of other miscellaneous work

Providing and laying ISI standard RCC pipes suitable for rubber ring joints including all local and central taxes, transportations, freight charges, transit insurance, loading and unloading, conveyance to site and stacking the same including Lowering, laying & jointing with RCC pipes and MS specials, cost of all labour, material, distance indicators, giving satisfactory hydraulic testing, commissioning as per IS code etc., complete and as directed by Engineer.(As a provision for carrying Electrical cables across the roads)

300 mm dia Class NP-IV

A-4- Water Treatment Plant

WTP1- Inlet & Distribution System

Inlet chamber, Measuring channel, distribution chamber, flash mixers, main channel to filter complex, by pass, walkways, stairs, railings etc.

Equipment

Flash Mixer Agitator with Motor and Reduction Gear

Testing

Channel Gate/ Shutter

Installation (Balance 20 % work)

Testing

Civil Works

(f) Finishing works - Plastering, Painting, Walkway, Hand Railing etc.(Balance 10 % work)

WTP2 – Clariflocculators

Pipes between flash mixers and clariflocculators, clariflocculators, walkways, stairs, railings, clarified water channel to the main channel and sludge tanks

Equipment

M.S Rotating Bridge Structure with Hanger Frame for Scrapper (40% testing & comm.)

End-Carriage Drive unit with Motor and Reduction Gear (50% balance work pending)

Flocculator Paddle with Motor and Reduction gear (50% balance work pending)

Telescopic Sludge Bleed Arrangement - 80 mm Dia

Supply

Installation

Testing

300 mm Dia CI Drain Pipes and Fittings (30% balance work pending)

300 mm Dia CI Sluice Valve for Drain Line

Testing

150 mm Dia Butterfly Valve with Actuator

Supply

Installation

Testing

80 mm Dia CI Sluice Valve for Drain Line

Supply

Installation

Testing

Recycling Tank

All finishing work

Hydrotesting

Sludge Lagoon

Lining work

Finishing Work

WTP3 – Filters and Filter House

Filters, all distribution channel, pipe gallery with clear water channel and sump, control gallery, observation platforms, walkways, stairs, railings, back wash water tank, clear water measuring channel, post chlorination tank, buffer/recycling tank & pumps

Equipment

500 X 500 mm electricity operated inlet Sluice Gate (Testing & Comm)

700 x 700 mm electricity operated inlet Sluice Gate between gullet & back wash drain(Testing & Comm)

450 mm Dia electricity operated sluice valve(Testing & Comm)

600mm Dia electricity operated sluice valve(Testing & Comm)

Civil Works

Finishing Works - Plastering, Painting, Hand Railing etc (25% Balance work)

Hydraulic Testing ( Balance work)

Back Wash Tank

Hydro testing

WTP4 - Administrative & Control Building

Administrative Control Building, backwash pumps, blowers, motor control centre, laboratory equipment, water cooler, furniture etc.

Equipments

Air blower with Motor and Base Frame

Testing( Balance work)

Motor Control Centre (MCC) Panel

Laboratory Equipment including Water Cooler, Furniture etc.(Testing & Comm)

Civil Works

(f) Finishing works - Plastering, Painting, Walkway, Hand Railing etc. (35% Balance work)

WTP5 - Chemical House

Chemical house, alum & lime dosing equipment, piping to the injection point and injection devices

Equipment

(a) Alum Tank agitator with motor

Testing

(b) Lime Tank agitator with motor

Testing

( c) Alum Dosing pump with motor

Testing

(d) Lime Dosing pump with motor

Testing

(e) HDPE pipes and PP Valves for Alum & Lime solution line

Testing

Civil Works

(f) All Finishing Works RCC Wall - 2nd Lift

WTP6- Chlorine Building, Chlorination & Chlorine storage

Chlorine Tonners

Chlorinator for Pre-Chlorination

Testing

Chlorinator for Post-Chlorination

Testing

Chlorine Dosing Pipes

Chlorine Leak DetectorTesting commisioning

EOT crane with Mono Rail

Testing

Civil works

Finishing work

WTP8- Instrumentation

(1) Providing and installation of LT control panels, exhaust fans, cables, cable ducting, earthing, Lighting fixtures, lighting panels, sockets, receptacles, fans, etc. complete in all respect in the outdoor areas of different Treatment plant units, the administration and control building, and other utility areas.

Installation (Balance 50% work)

testing

(2) Instrumentation Control Panel (ICP)/ Control Desk, (MMI) consisting of one PC and colour monitor, a colour laser printer, UPS all transducers and transmitters etc.

testing

(3) Full bore type Electro Megnetic flow meter of 300mmwith transmitter & Digital flow indicator & flow intrgtater

Supply

Installation

testing

(4) Ultrasonic flow meter for inlet & clear water channel with all accessories.

Installation

testing

(6) Sump Level sensor capacitance type with transmitter and digital indicator

Installation

testing

(7) Sensors for Transmitting Differential Head across Filter Beds

Installation

testing

(8) pH meter for continuous monitoring at inlet and outlet

Installation and testing

(9) Continuous turbidity meter and transmitter and inlet and outlet

Installation

testing

Other items & accessories not specified above but required to complete the work on turn key basis as per scope and specifications specified in tender document.

A5 P , l & Jointing CWT from Tetrol to Bagora

(3) Construction of scour valve chambers (1 new & 10 testing & comm.)

(4) Construction of air valve chamber for 150 mm Dia (1 new & 48 testing & comm.)

(5) Construction of Butterfly valve chambers for 1100 mm dia (2 new & 11 testing & comm.)

(9) Providing and laying of 300mm DI pipes grade K-7 from scour valve chamber to natural drain

(10) Construction of Civil work related to Offtake arrangements

(11)Any other civil work required to complete the work as per scope and specifications specified in tender document.

CWML1 (1) Supplying & Laying of MS pipes of plate thickness 7 mm as per IS 3589 for size 1100 mm dia

Commmissioning @5%

(4) Outer protective coating and cathodic protection for MS pipes Cables

Power Connection for CP Station@3%

Testing

(5) Supply & fixing of MS special all bends, tees, puddle collars, end pieces,mechanical joints all as per relevent ISS

(6) Supply of SluiceValve for scouring of PN-1.6 rating 300mm dia as per relevent IS

Supply

Installation

Testing & commissioning

(7) Supply of Butterfly Valve with gear box and dismentling joint PN-1.6 rating as per relevent IS in 1100 mm size

Supply

Installation

Testing & commissioning

(8) Supply of Air Valve with isolating sluice valve in 150 mm size

Installation

Testing & commissioning

(9)Providing and fixing of full bore type magnetic flow meter with by pass arrangement with necessary pipes and valves for each installation and providing 3 data loggers, psion organizer, cybel sensors with pulse units software and connecting cables for loding and unloading data loggers with all accessories as specified

testing(10%)

(10)Other items & accessories not specified above but required to complete the work on turn key basis (specified in tender bid)

A 6 ( P , l & Jointing CWT from Bagoral to Ummedabad ) CWMC2

(3) Construction of Scour valve chambers

(4) Construction of air valve chamber for following Dia

(a) 150 mm Dia (testing & comm.)

(b) 100 mm Dia(testing & comm.)

(5) Construction of Butterfly valve chamber for following sizes.

(9)Providing and laying of 300 mm DI pipes grade K7 from scour valve chamber to natural drains.

(10)Construction of civil works related to offtake arrangements.(20% balance work)

(11)Any other civil work required to complete the work as per scope and specifications (specified in tender bid)

CWML2- Supplying & Laying of MS pipes with specials

(1) Supplying & Laying of MS pipes of plate thickness 7 mm as per IS 3589 for size

1000 mm (Supply) @ 60%

Commmissioning @5%

Commmissioning @5%

(4) Cathodic Protection for MS pipe as specified

Erection for both 1000mm dia and 900 mm Dia

Power Connection for CP Station

Testing of both 1000mm dia and 900 mm Dia

(8) Supply of Air Valve with isolating sluice valve in following sizes

Installation

Testing & commissioning

(9) Providing and fixing of full bore type magnetic flow meter with by pass arrangement with necessary pipes and valves for each installation and providing 3 data loggers, psion organizer, cybel sensors with pulse units software and connecting cables for loding and unloading data loggers with all accessories as specified

Supply

Erection

Testing

(11) Other items & accessories not specified above but required to complete the work on turn key basis (specified in tender bid)

A 7 ( P , L & Jointing CWT from Ummedabad to Ahore) CWMC3

(3) Construction of Scour valve chambers

(4) Construction of air valve chamber for following Dia

(a) 100 mm Dia

(b) 80 mm Dia

(5) Construction of Butterfly valve chamber

(9) Providing and laying of 300 mm DI pipes grade K7 from scour valve chamber to natural drains.

(10) Construction of civil works related to off take arrangements

(11) Any other civil work required to complete the work as per scope and specifications (specified in tender bid)

CWML3 – Supply & Laying of DI Pipes with Specials

(1) Supply & laying of DI pipe of grade K9 /K7 as per IS 8329 and ISO 2531 or MS pipes as per IS 3589 for following size.

800 MM Dia

Commissioning

700 MM Dia

Commissioning

600 MM Dia

Commissioning

(5) Supply & fixing of DI or MS specials all bends, tees, poodle collars, end pieces, mechanical joints all as per relevent IS.

Commissioning

(6) Supply & fixing of Sluice Valve for scouring (scour valve) of PN-1.6 rating 300 mm dia. as per relevant IS.

Testing Commissioning

(7) Supply & fixing of Butterfly Valves with gear box, and dismantling joint PN-1.6 rating as per relevant IS in following sizes.

Testing & Commissioning

supply

Fixing

Testing & Commissioning

Fixing

Testing & Commissioning

(8) Supply & fixing of Air Valve with isolating sluice valve in following sizes.

Testing & Commissioning

Fixing

Testing & Commissioning

(9) Providing & fixing of full bore type magnetic flow meters with by pass arrangement with necessary pipes and valves for each installation and providing 3 data loggers, Psion organizer, cybel sensor with pulse units, software and connecting cables for loading and unloading data from loggers with all accessories as specified

supply

Fixing

Testing & Commissioning

(10) Other items & accessories not specified above but required to complete the work on turn key basis (specified in tender bid)

A 8 CWPH at Tetrol

CWC1 - Civil Works

(1) Design and construction of framed type RCC structures for CW pump house & sump at Tetrol to house 4 no. horizontal split casing pumps with motors for transmissions main & 4 no. horizontal split casing small pumps for village cluster,6.6 kv & 0.4 kv switchgears,starters, OHT crane, valves, suction and delivery piping, manifold and other allied civil strutures like control room, maintanance bay etc. and other related structural/civil/ painting/ electrical/ architectural/ joinery/ sanitary/ water harvesting etc works essential for completion of building work and operation of pumps in all possible conditions.all as per the requirements given in bid document.

(iv) Masonary in partition walls, plastering, doors, windows, joineries, paintings & finishes. Providing water coors of 80 lit capacity for drinking purposes and firt aids. (Balance work)

(v) Roof top finishing with provision of rain water harvesting

(2) Providing Safety Equipment for fire etc. and all other items and accessories not specified above but required to complete the work on turnkey basis.

supply

installation

(3) Providing the required furniture at pump house.

(1) Horizontal Split Casing Pumps with other accessories with following duty conditions: Q = 558 LPS and required head. All as per design requirement, specifications, conceptual drawing of department.

Testing & commissioning

(3) Electrically operated Slice valve Valves with Electric Actuators, gear box and dismantling joints on individual suction piping with all accessories of suitable dia and pressure rating as per design.

Testing & commissioning

(4) Electrically operated Butterfly Valves with Electric Actuators, gear box and dismantling joints on individual delivery piping with all accessories of suitable dia and pressure rating as per design.

Testing & commissioning

CWE1 Electrical Equipment & accessories

(1) 6.6 KV motors for Horizontal Split Casing pumps with all accessories as per design.

Testing & commissioning

(2) 6.6 kV HT Panel with incomer, 4 no.s outgoing feeders for HT motors & bus coupler all as per specification.

Commissioning

(3) 0.415 KV LT panel

Testing

(4) Batteries, Battery Charger with DC Distribution Board and accessories

(5) Providing local control consoles for all motors

(6) HT cables with cable trays & accessories

Testing (10%)

(7) LT cables with cable trays & accessories

Testing (10%)

(8) Earthing system complete for LT equipments

Testing (10%)

(9) Lightening protection system of pump house

Supply

Installation

Testing (10%)

(10) External illumination system of pump house

(11) Intetnal illumination system of pump house

(12) Exhaust Fans, wall mounted and pedestal type air circulators and other ventilating arrangements like roof extractors etc for both the bottom and top floors.

(13) Desert Coolers for Pump House, duty space etc. (long body with 15” exhaust fan)

CWI1- Instrumentation

(1) Providing Instrument Control Panel (ICP)

Installation (50% balance work)

Testing & commissioning

(2) Fullbore type electro magnetic flow meter with transmitter and digital flow indicator & flow integrators

Installation

Testing (10%)

(3) Sump Level sensor capacitance type with transmitter and digital indicator

Installation

Testing (10%)

(4) Pressure sensors, transmitters and indicator

Pressure transmittor

Installation

Testing (10%)

Pressure sensor

Installation

Testing (10%)

(5)Temperature sensors for motors and pump bearing temperature & motor winding temperatures, sensors & scanners

Temperature Sensors

Temperature Scanner

(6) Noise Meter(testing & comm.)

(7) Vibration Meter(testing & comm.)

A 9 CWPH at Bagora

CWC2 - Civil Works

(1) Design and construction of framed type RCC structures for CW pump house & sump at Tetrol to house 4 no. horizontal split casing pumps with motors for transmissions main & 4 no. horizontal split casing small pumps for village cluster,6.6 kv & 0.4 kv switchgears,starters, OHT crane, valves, suction and delivery piping, manifold and other allied civil strutures like control room, maintanance bay etc. and other related structural/ civil/ painting/ electrical/ architectural/ joinery/ sanitary/ water harvesting etc works essential for completion of building work and operation of pumps in all possible conditions.all as per the requirements given in bid document.

(iv) Masonary in partition walls, plastering, doors, windows, joineries, paintings & finishes. Providing water coors of 80 lit capacity for drinking purposes and firt aids.(balance finishing 30 % work)

Roof top finishing with provision of rain water harvesting

(2) Providing Safety Equipment for fire etc. and all other items and accessories not specified above but required to complete the work on turnkey basis.

supply

installation

(3) Providing the required furniture at pump house.

CWM 2- Mechanical equipment & accessories

(1) Horizontal Split Casing Pumps with other accessories with following duty conditions: Q = 418 LPS and required head. All as per design requirement, specifications, conceptual drawing of department.

Testing & commissioning

(3) Electrically operated Slice valve Valves with Electric Actuators, gear box and dismantling joints on individual suction piping with all accessories of suitable dia and pressure rating as per design.

Testing & commissioning

(4) Electrically operated Butterfly Valves with Electric Actuators, gear box and dismantling joints on individual delivery piping with all accessories of suitable dia and pressure rating as per design.

Testing & commissioning

(5) Dual Plate type Check valves

Testing & commissioning

CWE2 Electrical Equipment & accessories

(1) 6.6 KV motors for Horizontal Split Casing pumps with all accessories as per design.

Testing & commissioning

(2) 6.6 kV HT Panel with incomer, 4 no.s outgoing feeders for HT motors & bus coupler all as per specification.

Testing & Commissioning

(3) 0.415 KV LT panel

Testing & Commissioning

(4) Batteries, Battery Charger with DC Distribution Board and accessories

Supply

Errection

Testing

(5) Providing local control consoles for all motors

(6) HT cables with cable trays & accessories

Testing (10%)

(7) LT cables with cable trays & accessories

Testing (10%)

(8) Earthing system complete for LT equipments

Supply

Installation

Testing (10%)

(9) Lightening protection system of pump house

Supply

Installation

Testing (10%)

(10) External illumination system of pump house

(11) Intetnal illumination system of pump house

(12) Exhaust Fans, wall mounted and pedestal type air circulators and other ventilating arrangements like roof extractors etc for both the bottom and top floors.

(13) Desert Coolers for Pump House, duty space etc. (long body with 15” exhaust fan)

CWI 2 Instrumentation

(1) Providing Instrument Control Panel (ICP)

Installation (50% balance work)

Testing (10%)

Fullbore type electro magnetic flow meter with transmitter and digital flow indicator & flow integrators

Installation (Part work)

Testing & commissioning

Sump Level sensor capacitance type with transmitter and digital indicator

Installation

Testing (10%)

(2) Pressure sensors, transmitters and indicator

Pressure transmittor

Installation

Testing (10%)

Pressure sensor

Installation

Testing (10%)

Temperature sensors for motors and pump bearing temperature & motor winding temperatures, sensors & scanners

Temperature Sensors

Temperature Scanner

Noise Meter (testing and comm.)

Vibration Meter (testing and comm.)

A 10 CWPH at Ummedabad

CWC3- Civil Works

Design and construction of framed type RCC structures for CW pump house & sump at Tetrol to house 4 no. horizontal split casing pumps with motors for transmissions main & 4 no. horizontal split casing small pumps for village cluster,6.6 kv & 0.4 kv switchgears,starters, OHT crane, valves, suction and delivery piping, manifold and other allied civil strutures like control room, maintanance bay etc. and other related structural/civil/painting/ electrical/ architectural/joinery/sanitary/water harvesting etc works essential for completion of building work and operation of pumps in all possible conditions.all as per the requirements given in bid document.

Masonary in partition walls, plastering, doors, windows, joineries, paintings & finishes. Providing water coors of 80 lit capacity for drinking purposes and firt aids.(Balance work)

Roof top finishing with provision of rain water harvesting

Steel frame structure for cable tray, ladders working plateform, chaquered plates etc.

Providing Safety Equipment for fire etc. and all other items and accessories not specified above but required to complete the work on turnkey basis.

supply

installation

Providing the required furniture at pump house.

CWM 3(Mechanical Equipments)

Horizontal Split Casing Pumps with other accessories with following duty conditions: Q = 232 LPS and required head. All as per design requirement, specifications, conceptual drawing of department.

Testing & commissioning

Electrically operated Slice valve Valves with Electric Actuators, gear box and dismantling joints on individual suction piping with all accessories of suitable dia and pressure rating as per design.

Testing & commissioning

Electrically operated Butterfly Valves with Electric Actuators, gear box and dismantling joints on individual delivery piping with all accessories of suitable dia and pressure rating as per design.

Testing & commissioning

Dual Plate type Check valves

Testing & commissioning

CWE3 Electrical Equipment & accessories

6.6 KV motors for Horizontal Split Casing pumps with all accessories as per design.

Testing & commissioning

6.6 kV HT Panel with incomer, 4 no.s outgoing feeders for HT motors & bus coupler all as per specification.

Commissioning

Batteries, Battery Charger with DC Distribution Board and accessories

Testing

Providing local control consoles for all motors

Earthing system complete for LT equipments

Testing (10%)

Lightening protection system of pump house

Installation

Testing (10%)

External illumination system of pump house

Intetnal illumination system of pump house (part work)

Exhaust Fans, wall mounted and pedestal type air circulators and other ventilating arrangements like roof extractors etc for both the bottom and top floors.

Desert Coolers for Pump House, duty space etc. (long body with 15” exhaust fan)

CWI- 2 Instrumention

Providing Instrument Control Panel (ICP)

Installation (Part work)

Testing (10%)

Fullbore type electro magnetic flow meter with transmitter and digital flow indicator & flow integrators

Testing (10%)

Sump Level sensor capacitance type with transmitter and digital indicator

Installation

Testing (10%)

Pressure sensors, transmitters and indicator

Pressure transmittor

Installation

Testing (10%)

Pressure sensor

Installation

Testing (10%)

Temperature sensors for motors and pump bearing temperature & motor winding temperatures, sensors & scanners

Temperature Sensors

Temperature Scanner

Noise Meter (testing & comm.)

Vibration Meter (testing & comm.)

A-11: PLC AND SCADA SYSTEM AND COMMUNICATION SYSTEM

Design providing necessary equipments soft wares for installation and full proof working of collection of all essential data from particular equipment at all units at all head works through PLC system and transmission of data among all head works and control rooms through SCADA SYSTEM. The necessary arrangements for frequency allotment on wireless or V-sat system shall have to be done by contractor at his level. The control stations are to be established at following places as per the schemes specified in detailed specifications:

(A) Tetrol

PLC (Installation, testing & Comm.)

PC (Installation, testing & Comm.)

A4 size Colour Laser Jet printer (Installation, testing & Comm.)

A3 size B&W Lazer Jet printer (Installation, testing & Comm.)

WEB Server (Supply,Installation, testing & Comm.)

Ethernet Switch (Installation, testing & Comm.)

UPS with battery (1 Hr back up) (Installation, testing & Comm.)

Control Desk (Installation, testing & Comm.)

50'' Plasma Screen (Supply,Installation, testing & Comm.)

Communication System (Supply,Installation, testing & Comm.)

(B) Bagora

PLC (Installation, testing & Comm.)

Ethernet Switch (Installation, testing & Comm.)

Communication System (Installation, testing & Comm.)

Ummedabad

PLC (Installation, testing & Comm.)

Ethernet Switch (Installation, testing & Comm.)

Communication System (Installation, testing & Comm.)

( C )Ahore

PLC (Installation, testing & Comm.)

UPS with battery (1 Hr back up) (Installation, testing & Comm.)

Ethernet Switch (Installation, testing & Comm.)

Communication System (Installation, testing & Comm.)

( D )Control room at Sanchore

Lap top (Installation, testing & Comm.)

Table top Computer (Installation, testing & Comm.)

Printer A3 size Laser colour Jet (Installation, testing & Comm.)

Printer A4 size Laser colour Jet (Installation, testing & Comm.)

Scanner (Installation, testing & Comm.)

Fax Machine (Installation, testing & Comm.)

UPS with battery (1 Hr back up) (Installation, testing & Comm.)

Plotter (Installation, testing & Comm.)

Communication System(Installation, testing & Comm.)

(E) Control room at Jalore

Lap top(Installation, testing & Comm.)

Table top Computer(Installation, testing & Comm.)

Printer A3 size Laser colour Jet(Installation, testing & Comm.)

Printer A4 size Laser colour Jet(Installation, testing & Comm.)

Scanner(Installation, testing & Comm.)

Fax Machine(Supply, Installation, testing & Comm.)

UPS with battery (1 Hr back up)(Installation, testing & Comm.)

Plotter (Installation, testing & Comm.)

Communication System(Installation, testing & Comm.)

Mobile telephone connections with centrex system with group dialing facility with base telephone at Sanchore and Jalore control rooms, at RW pump house, WTP and CW pump house at Tetrol and Bagora, Ummedabad and Ahore head works and 12 handsets with charger for all handsets and base station for which the bidder will be responsible for all rental and other charges for maintaining the communication system during execution and up to the end of O&M period of 5 years.

Tele phone set(Supply, Installation, testing & Comm.)

EPABX System(Supply, Installation, testing & Comm.)

Mobile set with charger (Supply, Installation, testing & Comm.)

UPS with battery (1 Hr back up) (Supply, Installation, testing & Comm.)

Inter connecting cable (Supply, Installation, testing & Comm.)

A-12 CWR at Tetrol

Const of CWR of 8200 KL at Tetrol including the associated works of inlet and outlet arrangement etc.

CWRTC 1( Construction of CWR)

RCC Intermediate columns full Height

RCC Roof slab & staircase

Hydrotesting of whole structure

Backfilling, Plinth Protection, Site clearance etc complete

Interconnection Pipes, Overflow Pipes & Wash out Pipes with coating as per scope of work

Puddle collars

Testing

Dewatering Pump

Supply

Installation

Testing

Level Indicator

Ventilator, Flanges, Bends, Tees etc complete

CWRTC 2 --Allied Civil Works and Campus Development

General Grading of the campus area and providing required retaining walls

Construction of Boundary Wall

Providing lights on poles all along the access road, internal campus road and at all locations/points such as campus gate, campus garden etc. at Tetrol.

Internal campus road

Providing campus garden and allied horticultural and tree plantation works, and other allied works for complete finishing of the campus at Tetrol.

Providing fire hydrants etc. for complete Providing fire hydrants etc. for complete finishing and allied works for the Tetrol head works and other works not covered in the above list.

All allied works required for protection and efficient operation of system. Other items & accessories not specified above but required to complete the work on turn key basis

A-13 CWR at Bagora

Const of CWR of 8200 KL at Bagora including the associated works of inlet and outlet arrangement etc.

CWRBC1-Civil works

Hydrotesting of whole structure

Backfilling, Plinth Protection, Site clearance etc complete

Equipment

Dewatering Pump

Testing

Level Indicator

CWRBC2 -Allied Civil Works and Campus Development

General Grading of the campus area and providing required retaining walls

Construction of Boundary Wall (30% balance work pending)

Providing lights on poles all along the access road, internal campus road and at all locations/points such as campus gate, campus garden etc. at Tetrol.

Internal campus road ( 40% balance work)

Providing and fixing of street light poles

Providing and fixing of lights

Providing campus garden and allied horticultural and tree plantation works, and other allied works for complete finishing of the campus at Bagora

campus gardening

Tree Plantation

Providing fire hydrants etc. for complete Providing fire hydrants etc. for complete finishing and allied works for the Tetrol head works and other works not covered in the above list.

All allied works required for protection and efficient operation of system. Other items & accessories not specified above but required to complete the work on turn key basis

Harvesting Pit

WS system

Strom water Drain

A-14 CWR at Ummedabad

Const of CWR of 4800 KL at Ummedabad including the associated works of inlet and outlet arrangement etc.

CWRUBC1- Civil works

Backfilling, Plinth Protection, Site clearance etc complete

Dewatering Pump

Testing

Level Indicator

Ventilator, Flanges, Bends, Tees etc complete (30% balance work)

CWRUBC 2 -Allied Civil Works and Campus Development

General Grading of the campus area and providing required retaining walls

Construction of Boundary Wall (10% balance work pending)

Providing lights on poles all along the access road, internal campus road and at all locations/points such as campus gate, campus garden etc. at Tetrol.

Internal campus road

Providing and fixing of street light poles

Providing and fixing of lights

Providing campus garden and allied horticultural and tree plantation works, and other allied works for complete finishing of the campus at Tetrol.

campus gardening (50% balance work pending)

Providing fire hydrants etc. for complete Providing fire hydrants etc. for complete finishing and allied works for the Tetrol head works and other works not covered in the above list.

All allied works required for protection and efficient operation of system. Other items & accessories not specified above but required to complete the work on turn key basis

Harvesting Pit

WS system

Strom water Drain

A-15 CWR at Ahore

Const of CWR of 1100 KL at Ahore including the associated works of inlet and outlet arrangement etc.

CWRAC1 -Civil works

Hydrotesting of whole structure

Backfilling, Plinth Protection, Site clearance etc complete

Equipment

Sluice Valves (1200 mm dia)

Testing & commissioning

Dewatering Pump

Supply

Installation

Testing

Level Indicator

Ventilator, Flanges, Bends, Tees etc complete

CWRAC 2 -Allied Civil Works and Campus Development

General Grading of the campus area and providing required retaining walls

Construction of Boundary Wall

Providing lights on poles all along the access road, internal campus road and at all locations/points such as campus gate, campus garden etc. at Ahore

Providing and fixing of street light poles

Providing and fixing of lights

Providing campus garden and allied horticultural and tree plantation works, and other allied works for complete finishing of the campus at Ahore

campus gardening

Tree Plantation

Providing fire hydrants etc. for complete Providing fire hydrants etc. for complete finishing and allied works for the Tetrol head works and other works not covered in the above list.

All allied works required for protection and efficient operation of system. Other items & accessories not specified above but required to complete the work on turn key basis

Harvesting Pit

WS system

Strom water Drain

A-16 : Canal / Rail / Road / River / Nallah Crossings along the alignment of the Transmission mains

A-17 : Ancillary Buildings at all Head Works

(ABT) Ancillary buildings including office, residence and store building etc. as per scope of work at Tetrol HW

J-2 type Qtr 3 Sets

Sanitary works (40% balance work)

Water supply works (40% balance work)

Electrical work(40% balance work)

Door & window(Wooden and steel works)(40% balance work)

Painting & Misc Finishing & Site clearence etc complete (10% balance work)

Jen Office Building

Doors and windows (Wooden and steel work) (40% balance work)

Water supply works (40% balance work)

Sanitary Works (40% balance work)

Electrical Works(40% balance work)

Painting & Misc Finishing & Site clearence etc complete(10% balance work)

Jen Residential Building

Flooring(40% balance work)

Doors and windows (Wooden and steel work)(40% balance work)

Water Supply works(40% balance work)

Sanitary Works(40% balance work)

Electrical Works(40% balance work)

Painting & Misc Finishing & Site clearence etc complete(10% balance work)

Store Building

Masonary Work upto roof level

Casting of Roof Slab

Plaster

Flooring

Doors and windows (Wooden and steel work)

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

(ABB) Ancillary buildings including office, residence and store building etc. as per scope of work at Bagora HW

Jen Office Building

Doors and windows (Wooden and steel work)

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

Jen Residence Building

Doors and windows (Wooden and steel work)

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

J 2 Type Quarter 2 sets

Doors and windows (Wooden and steel work)

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

(ABU) Ancillary buildings including office, residence and store building etc. as per scope of work at Ummedabad HW

Jen Office Building

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

Jen Residence Building

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

J 2 Type Quarter 2 sets

Water Supply works

Sanitary Works

Electrical Works

Painting & Misc Finishing & Site clearence etc complete

A-18 : Construction of 33/6.6 KV SWITCH YARD at all Head Works

SWY1 – Construction of SWITCH YARD AT TETROL

33 kV Isolators with Earth Switch

Testing & Commissioning

33 kV Isolators without Earth Switch

Testing & Commissioning

33 kV Vacuum Circuit breakers with structure

Testing & Commissioning

33 kV Lightening arrester

Testing & Commissioning

33/6.6 kV, 2.5 MVA Sub Station Transformer

Testing & Commissioning

33Kv/0.415 kV Aux. Transformers of suitable capacity

Testing & Commissioning

Earthing system complete

Testing & Commissioning

Other items & accessories not specified above but required to complete the work on turn key basis. (30% balance work)

SWY2 – Construction of SWITCH YARD AT Bagoda

33/6.6 kV, 2.5 MVA Sub Station Transformer

Testing & Commissioning

33Kv/0.415 kV Aux. Transformers of suitable capacity

Testing & Commissioning

Earthing system complete

Testing & Commissioning

Other items & accessories not specified above but required to complete the work on turn key basis

SWY3 – Construction of SWITCH YARD AT Ummedabad

33/6.6 kV, 1.5 MVA Sub Station Transformer

Testing & Commissioning

33 KV/0.415 kV Aux. Transformers of suitable capacity

Testing & Commissioning

Earthing system complete

Testing & Commissioning

Other items & accessories not specified above but required to complete the work on turn key basis

PART-B

Cost of Basic Service Charge for O&M of all civil, Mechanical, Electrical, Instrumentation works at RW Pump house, CW pump houses, SWITCH YARDs at Tetrol, Bagora & Ummedabad, RWR, WTP, Transmission mains, CWRs, Service Roads, Head works building, office & residential buildings etc. complete system from Ratoda distributary at Tetrol to Ahore Head works including maintenance of water supply at 22 enroute offtakes generated by the contractor, or PHED for production and supply of potable water at different terminal points envisaged in the projet.

Minimum basic service charges (regardless of the quantity of treated water-demanded by .the department, in accordance with note-1 below.

For the first Year (Nil)

For the Second Year

O&M of Pumping Stations including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

RW Pump House

CW Pump House at Tetrol

CW Pump House at Bagora

CW Pump House at Ummedabad

Desilting of inlet channel, inlet well, RCC channel/duct, balancing well, outlet well, sumps of RW & CW pump houses at Tetrol, Bagora & Ummedabad every year & cleaning of RWR & CWRs in Vth years

O&M of Water Treatment Plant including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc. as per scope of works.

Repair & Maintenance of transmission mains, its valves, flow meters, manholes, water hammer control devices etc. as per scope of work

Tetrol to Bagora

Bagora to Ummedabad

Ummedabad to Ahore

Repair and maintenance of residential & administrative buildings as per the scope of work .

At Tetrol

At Bogora

At Ummedabad

O&M of 33/6.6 KV all SWITCH YARDs ; including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

At Tetrol head works

At Bogora head works

At Ummedabad head works

For the Third Year

O&M of Pumping Stations including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

RW Pump House

CW Pump House at Tetrol

CW Pump House at Bagora

CW Pump House at Ummedabad

Desilting of inlet channel, inlet well, RCC channel/duct, balancing well, outlet well, sumps of RW & CW pump houses at Tetrol, Bagora & Ummedabad every year & cleaning of RWR & CWRs in Vth and Vth years

O&M of Water Treatment Plant including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc. as per scope of works.

Repair & Maintenance of transmission mains, its valves, flow meters, manholes, water hammer control devices etc. as per scope of work

Tetrol to Bagora

Bagora to Ummedabad

Ummedabad to Ahore

Repair and maintenance of residential & administrative buildings as per the scope of work .

At Tetrol

At Bogora

At Ummedabad

O&M of 33/6.6 KV all SWITCH YARDs ; including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

At Tetrol head works

At Bogora head works

At Ummedabad head works

For the Fourth Year

O&M of Pumping Stations including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

RW Pump House

CW Pump House at Tetrol

CW Pump House at Bagora

CW Pump House at Ummedabad

Desilting of inlet channel, inlet well, RCC channel/duct, balancing well, outlet well, sumps of RW & CW pump houses at Tetrol, Bagora & Ummedabad every year & cleaning of RWR & CWRs in Vth and Vth years

O&M of Water Treatment Plant including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc. as per scope of works.

Repair & Maintenance of transmission mains, its valves, flow meters, manholes, water hammer control devices etc. as per scope of work

Tetrol to Bagora

Bagora to Ummedabad

Ummedabad to Ahore

Repair and maintenance of residential & administrative buildings as per the scope of work .

At Tetrol

At Bogora

At Ummedabad

O&M of 33/6.6 KV all SWITCH YARDs ; including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

At Tetrol head works

At Bogora head works

At Ummedabad head works

For the Fifth Year

O&M of Pumping Stations including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

RW Pump House

CW Pump House at Tetrol

CW Pump House at Bagora

CW Pump House at Ummedabad

Desilting of inlet channel, inlet well, RCC channel/duct, balancing well, outlet well, sumps of RW & CW pump houses at Tetrol, Bagora & Ummedabad every year & cleaning of RWR & CWRs in Vth and Vth years

O&M of Water Treatment Plant including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc. as per scope of works.

Repair & Maintenance of transmission mains, its valves, flow meters, manholes, water hammer control devices etc. as per scope of work

Tetrol to Bagora

Bagora to Ummedabad

Ummedabad to Ahore

Repair and maintenance of residential & administrative buildings as per the scope of work .

At Tetrol

At Bogora

At Ummedabad

O&M of 33/6.6 KV all SWITCH YARDs ; including administrative management, comprehensive operation, repairs, cost of lubricants, consumable, spare parts etc as per scope of works.

At Tetrol head works

At Bogora head works

At Ummedabad head works

Cost of Spares (The spares shall be supplied to the deptt. at the end of O&M contract period)

SP1: Spares for Mechanical Works for All Pumping Stations

Impellers of all type of VT pumps

• VT pump 1750 LPS

• VT pump 586 LPS

• VT pump 1172 LPS

Rotating assembly complete comprising of shaft,-shaft sleeve, nut, mpeller(s), impeller rings, casing rings etc. for main pumps for HSC pumps to be installed at Tetrol, Bagora & Ummedabad.

HSC Pump 558 LPS

HSC Pump 418 LPS

HSC Pump 232 LPS

Motor bearings for pumps at 1 & 2 above

• VT pump 1750 LPS

• VT pump 586 LPS

• VT pump 1172 LPS

HSC Pump 558 LPS

HSC Pump 418 LPS

HSC Pump 232 LPS

Line shaft bearings for pumps set 1 & 2 above

• VT pump 1750 LPS

• VT pump 586 LPS

• VT pump 1172 LPS

HSC Pump 558 LPS

HSC Pump 418 LPS

HSC Pump 232 LPS

Butterfly valve actuator (1 No. at each rating at each RW & CW pump House)

Sluice Valve Chamber (1 No. at each rating at each RW & CW pump House)

Extra pair of sprring of DPCV (1 No. at each rating at each RW & CW pump House)

Other items & accessories not specified above but required for efficieint operation of plant & system (specify in tender bid)

SP2 : Spares for Electrical Works for All Pumping Station

Miscellaneous

Double compression gland for each type of cable

Lugs for each size of cables for phase and neutral

Connectors for ACSR conductor each type

6:6 kV Motor protection relay (MPR) each tpye

H.R.C. Fuse each type

Conductor clamp (1 Set at each type)

MCCB (1 No. at each type)

Electrical protection relays like earth fault, over/under current, under frequency etc. (1 No. at each type)

Other items & accessories not specified above but required for efficient operation of plant & system (specify in tender bid)

SP3: Spares for Instrumentation Works for All Pumping Stations

Pressure Gauge (1 at each range at each pump house)

Other items & accessories not specified above but required for efficient operation of piant & system

SP4: Spares for mechanical Works: water treatment plant

Impeller for backwash pumps

Motor Bearings for backwash pumps

Other items & accessories not specified above but required for efficient operation of plant & system (specify in tender bid)

SP5: Spares for Electrical Works: water treatment plant

Volt meter (96 sqmm)

Ampere meter (96 sqmm) for pumping set outgoing feeder

Set of control fuse block including links (1 No. at each rating_

Fuse links (3 Nos. at each rating)

Set of three lamps with resistors

Set of 3 push buttons

MCCB (1 No. at each type)

Other items & accessories not specified above but required for efficient operation of plant & system (specify in tender bid)

SP6: Spares for instrumentation Works: water treatment plant

Pressure gauge (1No. at each range)

Printer cartage (Full set 3)

Other items & accessories not specified above but required for efficient operation of plant & system (specify in tender bid)

SP7: Spares For Pipeline work

DI or MS Barrel of each size and each thickness (30m each size & each thickness)

Rubber ring for DI pipe 1100mm, 1000mm, 900mm, 800mm, 700mm & 600mm dia (For 2 Joints)

Packing for manhple covers (1 dozens)

Sluice valve rod (1 No. at each size)

Butterfly valve sealing rings (4 Nos. at each size)

Butterfly valve main shaft (1 No. at each size)

Butterfly valve actuator (1 No. at each size)

Air valve's balls (2 dozens at each size)

Air valve's orifice plate (1 dozen at each size)

Gear box (1 No. at each size)

Gaskets for all valves (1 dozen at each size)

Other items & accessories not specified above but required for efficient operation of plant & system (specify in tender bid)

Cost of Tools & Tackles (The tools & tackles shall be supplied to the deptt.)

Hand Trolley (250kg capacity) (1 No. at each head works)

Tripod with Chain Pulley Blocks of 1 Ton capacity (6.0m legs) at Tetrol

Welding Set, 400 amp., three phase regulator type, air cooled, wheel mounted with 15 mtr welding cable, 2 mtr. welding cable for earthing, one welding holder, one welding screen with glass and 3 cable lugs, one pair hand gloves and one wire brush at Tetrol.

Portable Hand Drill (Heavy Duty) of capacity 13 mm to 23 mm with 1/2" drill chuck but without drill bits and drill stand. (1 No. at each head works)

Pipe wrench 10", 14", 18", 24' and 36" of ISI mark (1 No. at each head works)

Chain Wrench suitable for 200mm pipe of ISI mark (1 No. at each head works)

Flat files of size 8", 10", 12" (mediul cut type) (1 No. at each head works)

Round files of sizes 8", 10", 12", 14" & 16" (medium cut type) (1 No. at each head works)

Gas cutter with nozzles and two cylinders (1 No. at each head works)

Screq Driver Set (1 No. at each head works)

Insulating Fuse Puller for all types of fuse to be used in Project components (1 No. at each head works)

Pullary Piller for the Project Components (1 No. at each head works)

12" and 18" Hacksaw frame with 36 blades of ISI mark (1 No. at each head works)

Nose Pillar ISI Mark (1 No. at each head works)

Tong Tester, 1000 Amp (1 No. at each head works)

Crimping tool upto.95 sq. mm (1 No. at each head works)

Hydraulic Crimping tool, 25 to 400 sq. mm (1 No. at each head works)

Hydraulic Jack, 5 Ton capacity (1 No. at each head works)

Pipe dye set 1/2" to 2" (1 No. at each head works)

Hammer of 200gm, 450gm, 1kg, 5kg & 20kg weight (1 No. at each head works)

Aluminum Folding ladder of 8 meters (1 No. at each head works)

Set of Ring spanners & Fixed spanners (covering all sizes) (1 No. at each head works)

Allen keys (As per plant and machines supplied) (1 No. at each pump house)

Set of Tommy (1 No. at each head works)

Electrical driven submersible type de-watering pumps of 5 kW with 5 meters hose- pipe (1 No. at each head works)

Megger, 1000 volt (1 No. at each head works)

Megger, 5000 volt (1 No. at each head works)

Flexible pipe of 25mm dia for gardening (100 Mtr. at each head works)

Rubber hand gloves - 3.3 kV (4 Pairs at each head works)

Hand Grinder (Angle 7") (1 No. at each head works)

Bench Vice No 6, Apex or equivalent make (1 No. at each head works)

Multi Meter (Digital) (1 No. at each head works)

Vaccum cleaner (indsutrial type) (1 No. at each head works)

Other items & accessories not specified above but required for effificnet operation of plant & system (specify in tender bid) (1 No. at each head works)

shri hari infra projects pvt ltd

GCKC Projects and Works Pvt. Ltd.