General-Govt Womens College Vazhuthacaud Renovation of New auditorium and other allied works Civil work

Amount

Appendix A- Interior works in New Auditorium

14.83:Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

11.33.1:25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with:Second class teak wood

OD73357/2025-2026: Providing and fixing UPVC composite material wall/ ceiling panel including cutting the panel to required size and shape and fixing to the wall/ceiling with silicon sealant or with screws including cost of all materials labour for cutting and fixing etc. complete.

OD32354/2025-2026:Providing and laying La Potra finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

OD32520/2025-2026:Dismantling aluminium sections or components (doors, windows, partitions, etc.) including removal of glass, fixtures, fasteners, and stacking serviceable/unserviceable material within 50m lead, all complete as per direction of Engineer-in-Charge.

50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

OD32416/2025-2026:Supplying, fabricating and fixing in position wooden panelling on ceiling and walls, the panels are crafted from 12mm thick marine plywood(BWS IS no 710) of approved manufactures after cutting, shapping the plywood to the required shape as per requirements and fixed on walls, ceiling or on steel/ Aluminium frame work using screw, facia decorated with 4mm thick teak veneer century plywood or equivalent(exact colour and shade to be got approved by the client/ Engineer in charge) and bonded on marine plywood using synthetic adhesive, including providing grooves 4mm on panel facia. The rate includes cost and conveyance of all the materials, all labour charges etc. complete

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.12.1:Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0mm thick & 2100 mm long with S.S. screws etc. complete as per direction of Engineer -in-Charge.Anodized (AC 15) aluminium tubular handle bar

21.2.1:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

OD32530/2025-2026:Dismantling of existing plywood work in partitions, wall paneling, false ceiling, cupboards, etc., including carefully removing nails/screws, stacking of serviceable material within 50m lead, and disposal of unserviceable material, all complete as directed by the Engineer-in-Charge.

OD32534/2025-2026:Supplying, fabricating, and erecting ground-supported aluminium alloy lighting truss system of box (square) profile approx. 290mm x 290mm or 400mm x 400mm, including vertical supports, base plates, corner joints, spigots, pins, clamps, rigging accessories, and lighting fixture mounting, all complete as per standard event rigging practices and Engineer-in-Charge instructions.

OD71433/2025-2026:Providing and fixing a Logo of size 60 X 60cm made from 4mm thick acrylic sheet fixed on 18 mm thick multiwood with screws on walls, colour as decided by the Engineer - in - Charge including cost of all materials labour for making and fixing etc. complete.

16.89:Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi models location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

OD73506/2025-2026:Providing and Installing Curtains as per the approved design.

OD73577/2025-2026:Providing and fixing Stainless steel letters of height 25cm(Symbols of whichever height)in Malayalam and English including labour charges etc. complete.

OD73578/2025-2026:Providing and fixing Stainless steel letters of height 35cm(symbols of whichever height ) in Malayalam and English including labour charges etc. complete.

Appendix B - Maintenance works in toilets

14.82:Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge

17.4.1:Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern

17.1.1:Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

VISAKH V S (BID ID -2436145)

HARI A (BID ID -2436185)

Bidder Name

VISAKH V S

HARI A