Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.1 LAccepted-AOC | ₹4.1 L | L1 | Accepted-AOC first lowest |
| 2 | L2₹4.2 L+₹6,903.15 (1.67%)Rejected-AOC | ₹4.2 L+₹6,903.15 (1.67%) | L2 | Rejected-AOC l2 |
Tender Value
₹4.0 L
EMD Value
₹9,958
Closing Date
21 Jun 2024, 1:00 pmClosed
Assistant Executive Engineer
P H Sub Division,KWA,Ponkunnam
DRW 2023-24 Urgent works to mitigate water scarcity-Supply and installation of 10 HP submersible pump set at Karikkattoor pump house
2024_KWA_676160_1
01/AEE/PHSD/PKM/2024-25
Open Tender
Civil Works - Water Works
Item Rate
Karikkattor
Please refer Tender documents.
5 documents required · 5 mandatory
₹880
₹9,958
19 Sept 2024
15 Jun 2024
22 Jun 2024
15 Jun 2024
21 Jun 2024
15 Jun 2024
Amount
APPENDIX I -Supply and Installation of 10HP Submersible Pumpset at RWPH Karikkattoor
APPENDIX II-Replacement of all Wiring, Meter Board etc at RWPH Karikkattoor
OD300941/2023-2024:Disconnecting power supply and dismantling all cable connecctions and dismantling damaged meter board from wall and fitting new meter board , fitting new power meter etc… for 10HP Submersible pump set .
OD302398/2023-2024:Disconnecting power supply from panel board dismantling incoming and out going cables from panel board and dismantling damaged panel board from wall and fitting new metal pannel board on wall with indicator, volt meter , Ampere meter ,and wiring also connecting with cables and trial run for existing pumpset .
OD301762/2023-2024:Dismantling damaged Wiring , insulations and Fixing New Wiring, fixing new light connection fixing new Tube sets, and plug points
APPENDIX III-Replacing Damaged Window at Pumphouse , fitting New Sluice Valve on supply line , Repainting Pumphouse
14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)
15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below
9.1.2:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Sal wood
9.5.1.2:Providing and fixing panelled or panelled and glazed shutters for shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer - in-charge.30 mm thick shutters
9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
13.3.1:20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand)
2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
OD311616/2023-2024: Supplying and fixing 90mm PVC Tailpiece Of Req. Pressure
2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.
100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.
NARAYANANKUTTY P R
Bidder Name
NARAYANANKUTTY P R
FARADAYS ELECTRIC WORKS
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1051393.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .